[PATCH v7 00/15] arm64: dts: qcom: sdm845-lg: Improve hardware support in devicetree

[PATCH v7 00/15] arm64: dts: qcom: sdm845-lg: Improve hardware support in devicetree

[Paul Sajna]

Rollup of improved hardware support via devicetree for LG G7 ThinQ
(judyln) from sdm845-mainline kernel fork

Notably, this patch-series enables full DRM acceleration and wifi,
among other small improvements in individual commits

after this patch-series the main things that remain to be worked
on include touchscreen, audio, and modem.

Depends upon panel driver patch-series https://lore.kernel.org/all/20250910-judyln-panel-v1-1-825c74403bbb@postmarketos.org/T/#r9a976ca01e309b6c03100e984a26a0ffc2fe2002

Co-developed-by: Amir Dahan <system64fumo@tuta.io>
Co-developed-by: Christopher Brown <crispybrown@gmail.com>
Signed-off-by: Amir Dahan <system64fumo@tuta.io>
Signed-off-by: Christopher Brown <crispybrown@gmail.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
---
Changes in v7:
- Reorganize commits
- Add firmware-paths for judyp
- Reword framebuffer reference commit message
- Squash qups and dma-controllers commits
- Link to v6: https://lore.kernel.org/r/20260323-judyln-dts-v6-0-29d70ca1651c@postmarketos.org

Changes in v6:
- Mistakes were made with b4 and branch was rebuilt, hopefully correctly
- Split more things that got mixed into the sort commit (qups and venus)
- Added more backlight properties from downstream
- Framebuffer added back in
- Update compatible for panel
- Add qcom,te-source
- Reference memory region in framebuffer instead of reg
- Correction to rmtfs_mem
- Set lab/ibb to 5.5V
- Fixed flashlight/torch
- Update commit message for gsi-loader=self
- Update LG to capitalized in firmware paths
- Remove qcom,snoc-host-cap-skip-quirk dependency (break wifi)
- Enable dma controllers
- Link to v5: https://lore.kernel.org/r/20251203-judyln-dts-v5-0-80c1ffca8487@postmarketos.org

Changes in v5:
- update system64's email
- reduce lab/ibb voltage range
- status should go last
- remove rebase leftovers
- fix flashlight
- Link to v4: https://lore.kernel.org/r/20251125-judyln-dts-v4-0-a5a60500b267@postmarketos.org

Changes in v4:
- add panel identifier in addition to ddic
- make sde_te pull-down
- fixup flash current
- remove framebuffer reserved-mem
- remove manual lower guard
- depend upon https://lore.kernel.org/all/20251110-skip-host-cam-qmi-req-v2-0-0daf485a987a@ixit.cz/T
- reword commits
- Link to v3: https://lore.kernel.org/r/20250928-judyln-dts-v3-0-b14cf9e9a928@postmarketos.org

Changes in v3:
- change firmware paths to lowercase 'lg' (matching dt-bindings)
- fix signoffs
- add wifi dmesg to commit message
- remove regulator-always-on from ibb
- remove framebuffer
- remove msm ids
- don't continue commit subject into commit messages
- split bluetooth node
- add sbu uart details to commit message
- change ipa gsi-loader to self
- Link to v2: https://lore.kernel.org/r/20250916-judyln-dts-v2-0-5e16e60263af@postmarketos.org

Changes in v2:
- sort at the start
- drop unnecessary labels
- drop unnecessary gmu
- multi-led
- split fb-panel changes
- expand upon firmware commit message
- use qcom,calibration-variant instead of
  qcom,ath10k-calibration-variant
- change firmware paths to include "LG"
- remove framebuffer reservation
- add lab/ibb

- Link to v1: https://lore.kernel.org/r/20250913-judyln-dts-v1-0-23b4b7790dce@postmarketos.org

---
Amir Dahan (1):
      arm64: dts: qcom: sdm845-lg-common: Add LEDs

Christopher Brown (1):
      arm64: dts: qcom: sdm845-lg-judyln: Add battery and charger

Paul Sajna (13):
      arm64: dts: qcom: sdm845-lg-common: Sort nodes and properties
      arm64: dts: qcom: sdm845-lg-judyln: Add firmware nodes, change path
      arm64: dts: qcom: sdm845-lg-judyp: Define firmware paths for judyp
      arm64: dts: qcom: sdm845-lg-common: Enable venus
      arm64: dts: qcom: sdm845-lg-common: Enable qups and their dma controllers
      arm64: dts: qcom: sdm845-lg: Add uarts and Bluetooth
      arm64: dts: qcom: sdm845-lg-judyln: Add lab/ibb
      arm64: dts: qcom: sdm845-lg-judyln: Add display panel
      arm64: dts: qcom: sdm845-lg: Add wifi nodes
      arm64: dts: qcom: sdm845-lg-common: Add chassis-type
      arm64: dts: qcom: sdm845-lg-common: Add camera flash
      arm64: dts: qcom: sdm845-lg-common: Change ipa gsi-loader to 'self', add memory-region
      arm64: dts: qcom: sdm845-lg-{judyln, judyp}: Reference memory region in fb

 arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 228 +++++++++++++++++++------
 arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts  | 129 +++++++++++++-
 arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts   |  30 +++-
 3 files changed, 319 insertions(+), 68 deletions(-)
---
base-commit: 674feabdc26e80c4dbc884d7b6e2d2a4b93919e6
change-id: 20250911-judyln-dts-17c41e59dc0f
prerequisite-message-id: <20250910-judyln-panel-v1-1-825c74403bbb@postmarketos.org>
prerequisite-patch-id: e51151ea7f8fdad6ad7d90713febc5c6b6fc4f9c
prerequisite-patch-id: b3dd44250da9cd12bc5b2d0d7e865dbe19ceed92
prerequisite-patch-id: fd6c8077806cb03fcf37d0e0d730314c2760e334

Best regards,
-- 
Paul Sajna <sajattack@postmarketos.org>

[PATCH v7 01/15] arm64: dts: qcom: sdm845-lg-common: Sort nodes and properties

[Paul Sajna]

Improve adherance to style guidelines below:
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
---
 arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 124 ++++++++++++-------------
 1 file changed, 62 insertions(+), 62 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 0ee2f4b99fbd..93ed8f240461 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -38,11 +38,6 @@ reserved-memory {
 		#size-cells = <2>;
 		ranges;
 
-		qseecom_mem: memory@b2000000 {
-			reg = <0 0xb2000000 0 0x1800000>;
-			no-map;
-		};
-
 		gpu_mem: memory@8c415000 {
 			reg = <0 0x8c415000 0 0x2000>;
 			no-map;
@@ -99,6 +94,11 @@ memory@9d400000 {
 			no-map;
 		};
 
+		qseecom_mem: memory@b2000000 {
+			reg = <0 0xb2000000 0 0x1800000>;
+			no-map;
+		};
+
 		rmtfs_mem: rmtfs-region@f0800000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0 0xf0800000 0 0x202000>;
@@ -467,14 +467,22 @@ &mss_pil {
 	status = "okay";
 };
 
+&pm8998_gpios {
+	vol_up_pin_a: vol-up-active-state {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
+
 &pm8998_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
 };
 
 &sdhc_2 {
-	status = "okay";
-
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 
 	pinctrl-names = "default";
@@ -482,55 +490,8 @@ &sdhc_2 {
 
 	vmmc-supply = <&vreg_l21a_2p95>;
 	vqmmc-supply = <&vddpx_2>;
-};
-
-/*
- * UFS works partially and only with clk_ignore_unused.
- * Sometimes it crashes with I/O errors.
- */
-&ufs_mem_hc {
-	status = "okay";
-
-	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
-
-	vcc-supply = <&vreg_l20a_2p95>;
-	vcc-max-microamp = <600000>;
-};
-
-&ufs_mem_phy {
-	status = "okay";
-
-	vdda-phy-supply = <&vdda_ufs1_core>;
-	vdda-pll-supply = <&vdda_ufs1_1p2>;
-};
-
-&usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
-	/* TODO: these devices have usb id pin */
-	dr_mode = "peripheral";
-};
-
-&usb_1_hsphy {
-	status = "okay";
-
-	vdd-supply = <&vdda_usb1_ss_core>;
-	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
-	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
-
-	qcom,imp-res-offset-value = <8>;
-	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
-	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
-	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
-};
 
-&usb_1_qmpphy {
 	status = "okay";
-
-	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
-	vdda-pll-supply = <&vdda_usb1_ss_core>;
 };
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
@@ -571,12 +532,51 @@ sd_card_det_n: sd-card-det-n-state {
 	};
 };
 
-&pm8998_gpios {
-	vol_up_pin_a: vol-up-active-state {
-		pins = "gpio6";
-		function = "normal";
-		input-enable;
-		bias-pull-up;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-	};
+/*
+ * UFS works partially and only with clk_ignore_unused.
+ * Sometimes it crashes with I/O errors.
+ */
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* TODO: these devices have usb id pin */
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb1_ss_core>;
+
+	status = "okay";
 };

-- 
2.53.0

[PATCH v7 02/15] arm64: dts: qcom: sdm845-lg-judyln: Add firmware nodes, change path

[Paul Sajna]

Add paths for Qualcomm firmware, including:
ipa, modem, venus, gpu

GPU and bluetooth are confirmed working, others may need more
testing/fixes

But regardless they will need the firmware paths specified here
and firmware added upstream before they will work, so might as well
get started on it now.

Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
---
 arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
index 09bfcef42402..6d6cc197176c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
@@ -40,19 +40,23 @@ key-thinq {
 };
 
 &adsp_pas {
-	firmware-name = "qcom/sdm845/judyln/adsp.mbn";
+	firmware-name = "qcom/sdm845/LG/judyln/adsp.mbn";
 };
 
 &cdsp_pas {
-	firmware-name = "qcom/sdm845/judyln/cdsp.mbn";
+	firmware-name = "qcom/sdm845/LG/judyln/cdsp.mbn";
 };
 
 &gpu_zap_shader {
-	firmware-name = "qcom/sdm845/judyln/a630_zap.mbn";
+	firmware-name = "qcom/sdm845/LG/judyln/a630_zap.mbn";
+};
+
+&ipa {
+	firmware-name = "qcom/sdm845/LG/judyln/ipa_fws.mbn";
 };
 
 &mss_pil {
-	firmware-name = "qcom/sdm845/judyln/mba.mbn", "qcom/sdm845/judyln/modem.mbn";
+	firmware-name = "qcom/sdm845/LG/judyln/mba.mbn", "qcom/sdm845/LG/judyln/modem.mbn";
 };
 
 &tlmm {
@@ -64,3 +68,7 @@ thinq_key_default: thinq-key-default-state {
 		bias-pull-up;
 	};
 };
+
+&venus {
+	firmware-name = "qcom/sdm845/LG/judyln/venus.mbn";
+};

-- 
2.53.0

[PATCH v7 03/15] arm64: dts: qcom: sdm845-lg-judyp: Define firmware paths for judyp

[Paul Sajna]

For consistency with judyln and new naming scheme for firmware

Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
---
 arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
index ffe1da2227f0..fd62abbb7128 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
@@ -26,17 +26,25 @@ framebuffer@9d400000 {
 };
 
 &adsp_pas {
-	firmware-name = "qcom/sdm845/judyp/adsp.mbn";
+	firmware-name = "qcom/sdm845/LG/judyp/adsp.mbn";
 };
 
 &cdsp_pas {
-	firmware-name = "qcom/sdm845/judyp/cdsp.mbn";
+	firmware-name = "qcom/sdm845/LG/judyp/cdsp.mbn";
 };
 
 &gpu_zap_shader {
-	firmware-name = "qcom/sdm845/judyp/a630_zap.mbn";
+	firmware-name = "qcom/sdm845/LG/judyp/a630_zap.mbn";
+};
+
+&ipa {
+	firmware-name = "qcom/sdm845/LG/judyp/ipa_fws.mbn";
 };
 
 &mss_pil {
-	firmware-name = "qcom/sdm845/judyp/mba.mbn", "qcom/sdm845/judyp/modem.mbn";
+	firmware-name = "qcom/sdm845/LG/judyp/mba.mbn", "qcom/sdm845/LG/judyp/modem.mbn";
+};
+
+&venus {
+	firmware-name = "qcom/sdm845/LG/judyp/venus.mbn";
 };

-- 
2.53.0

[PATCH v7 04/15] arm64: dts: qcom: sdm845-lg-common: Enable venus

[Paul Sajna]

Qualcomm video en/de-coder

Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
---
 arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 93ed8f240461..87ac41ec2e46 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -580,3 +580,7 @@ &usb_1_qmpphy {
 
 	status = "okay";
 };
+
+&venus {
+	status = "okay";
+};

-- 
2.53.0

[PATCH v7 05/15] arm64: dts: qcom: sdm845-lg-common: Enable qups and their dma controllers

[Paul Sajna]

Qualcomm serial communicators required for i2c, serial, and spi

Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
---
 arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 87ac41ec2e46..8b7a271b7568 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -454,6 +454,14 @@ &gcc {
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
 };
@@ -482,6 +490,14 @@ &pm8998_resin {
 	status = "okay";
 };
 
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &sdhc_2 {
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 

-- 
2.53.0

Re: [PATCH v7 05/15] arm64: dts: qcom: sdm845-lg-common: Enable qups and their dma controllers

[Konrad Dybcio]

On 4/1/26 5:15 AM, Paul Sajna wrote:
> Qualcomm serial communicators required for i2c, serial, and spi
> 
> Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v7 05/15] arm64: dts: qcom: sdm845-lg-common: Enable qups and their dma controllers

[Dmitry Baryshkov]

On Tue, Mar 31, 2026 at 08:15:10PM -0700, Paul Sajna wrote:
> Qualcomm serial communicators required for i2c, serial, and spi
> 
> Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
> ---
>  arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry

[PATCH v7 06/15] arm64: dts: qcom: sdm845-lg: Add uarts and Bluetooth

[Paul Sajna]

uart9 is debug serial on USB SBU1/2

UART RX is SBU1 and UART TX is SBU2 of the USB-C port).
1.8V Logic Level
Tested using pololu usb07a https://www.pololu.com/product/2585
and CH340 USB-UART

uart6 is bluetooth

Bluetooth: hci0: setting up wcn399x
Bluetooth: hci0: QCA Product ID   :0x0000000a
Bluetooth: hci0: QCA SOC Version  :0x40010214
Bluetooth: hci0: QCA ROM Version  :0x00000201
Bluetooth: hci0: QCA Patch Version:0x00000001
Bluetooth: hci0: QCA controller version 0x02140201
Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
Bluetooth: hci0: QCA Downloading qca/judyln/crnv21.bin
Bluetooth: hci0: QCA setup on UART is completed

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
---
 arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 37 ++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts  |  8 ++++++
 arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts   |  8 ++++++
 3 files changed, 53 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 8b7a271b7568..27221b3afb30 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -27,10 +27,17 @@
 /delete-node/ &wlan_msa_mem;
 
 / {
+	aliases {
+		serial0 = &uart9;
+		serial1 = &uart6;
+	};
+
 	chosen {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
+
+		stdout-path = "serial0:115200n8";
 	};
 
 	reserved-memory {
@@ -498,6 +505,16 @@ &qupv3_id_1 {
 	status = "okay";
 };
 
+&qup_uart9_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart9_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
 &sdhc_2 {
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 
@@ -548,6 +565,26 @@ sd_card_det_n: sd-card-det-n-state {
 	};
 };
 
+&uart6 {
+	pinctrl-0 = <&qup_uart6_4pin>;
+
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart9 {
+	status = "okay";
+};
+
 /*
  * UFS works partially and only with clk_ignore_unused.
  * Sometimes it crashes with I/O errors.
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
index 6d6cc197176c..90dd5a2a6f30 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
@@ -43,6 +43,14 @@ &adsp_pas {
 	firmware-name = "qcom/sdm845/LG/judyln/adsp.mbn";
 };
 
+&bluetooth {
+	/*
+	 * This path is relative to the qca/
+	 * subdir under lib/firmware.
+	 */
+	firmware-name = "judyln/crnv21.bin";
+};
+
 &cdsp_pas {
 	firmware-name = "qcom/sdm845/LG/judyln/cdsp.mbn";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
index fd62abbb7128..efca260c3dcf 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
@@ -29,6 +29,14 @@ &adsp_pas {
 	firmware-name = "qcom/sdm845/LG/judyp/adsp.mbn";
 };
 
+&bluetooth {
+	/*
+	 * This path is relative to the qca/
+	 * subdir under lib/firmware.
+	 */
+	firmware-name = "judyp/crnv21.bin";
+};
+
 &cdsp_pas {
 	firmware-name = "qcom/sdm845/LG/judyp/cdsp.mbn";
 };

-- 
2.53.0

[PATCH v7 07/15] arm64: dts: qcom: sdm845-lg-judyln: Add battery and charger

[Paul Sajna]

From: Christopher Brown <crispybrown@gmail.com>

Values based on lineageos kernel

https://github.com/LineageOS/android_kernel_lge_sdm845/blob/lineage-22.2/arch/arm64/boot/dts/lge/sdm845-battery/LGE_BLT39_LGC_3000mAh.dtsi

Signed-off-by: Christopher Brown <crispybrown@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
---
 arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
index 90dd5a2a6f30..6b837da4ef21 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
@@ -37,6 +37,14 @@ key-thinq {
 			interrupts = <89 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <3000000>;
+		voltage-min-design-microvolt = <3200000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
 };
 
 &adsp_pas {
@@ -67,6 +75,12 @@ &mss_pil {
 	firmware-name = "qcom/sdm845/LG/judyln/mba.mbn", "qcom/sdm845/LG/judyln/modem.mbn";
 };
 
+&pmi8998_charger {
+	monitored-battery = <&battery>;
+
+	status = "okay";
+};
+
 &tlmm {
 	thinq_key_default: thinq-key-default-state {
 		pins = "gpio89";

-- 
2.53.0

[PATCH v7 08/15] arm64: dts: qcom: sdm845-lg-common: Add LEDs

[Paul Sajna]

From: Amir Dahan <system64fumo@tuta.io>

Add the multicolor status LED in the phone's notch.

Signed-off-by: Amir Dahan <system64fumo@tuta.io>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
---
 arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 28 ++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 27221b3afb30..51cd930488a9 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -6,6 +6,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
@@ -497,6 +498,33 @@ &pm8998_resin {
 	status = "okay";
 };
 
+&pmi8998_lpg {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@4 {
+			reg = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };

-- 
2.53.0

[PATCH v7 09/15] arm64: dts: qcom: sdm845-lg-judyln: Add lab/ibb

[Paul Sajna]

These regulators are required for the LCD

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
---
 arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
index 6b837da4ef21..2c024b32c00c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
@@ -71,6 +71,23 @@ &ipa {
 	firmware-name = "qcom/sdm845/LG/judyln/ipa_fws.mbn";
 };
 
+&ibb {
+	regulator-min-microvolt = <5500000>;
+	regulator-max-microvolt = <5500000>;
+	regulator-over-current-protection;
+	regulator-pull-down;
+	regulator-soft-start;
+	qcom,discharge-resistor-kohms = <300>;
+};
+
+&lab {
+	regulator-min-microvolt = <5500000>;
+	regulator-max-microvolt = <5500000>;
+	regulator-over-current-protection;
+	regulator-pull-down;
+	regulator-soft-start;
+};
+
 &mss_pil {
 	firmware-name = "qcom/sdm845/LG/judyln/mba.mbn", "qcom/sdm845/LG/judyln/modem.mbn";
 };

-- 
2.53.0

[PATCH v7 10/15] arm64: dts: qcom: sdm845-lg-judyln: Add display panel

[Paul Sajna]

Also include other supporting msm drm nodes, gpio and backlight

Co-developed-by: Amir Dahan <system64fumo@tuta.io>
Signed-off-by: Amir Dahan <system64fumo@tuta.io>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
---
 arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 13 +++--
 arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts  | 68 +++++++++++++++++++++++++-
 2 files changed, 75 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 51cd930488a9..552d9719bede 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -450,10 +450,6 @@ &cdsp_pas {
 	status = "okay";
 };
 
-&dispcc {
-	status = "disabled";
-};
-
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
@@ -525,6 +521,15 @@ led@5 {
 	};
 };
 
+&pmi8998_wled {
+	qcom,current-limit-microamp = <20000>;
+	qcom,ovp-millivolt = <29600>;
+	qcom,switching-freq = <800>;
+	qcom,num-strings = <3>;
+	qcom,cabc;
+	status = "okay";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
index 2c024b32c00c..7948fe3dbaa2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
@@ -21,8 +21,6 @@ framebuffer@9d400000 {
 			height = <3120>;
 			stride = <(1440 * 4)>;
 			format = "a8r8g8b8";
-			lab-supply = <&lab>;
-			ibb-supply = <&ibb>;
 		};
 	};
 
@@ -71,6 +69,51 @@ &ipa {
 	firmware-name = "qcom/sdm845/LG/judyln/ipa_fws.mbn";
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	status = "okay";
+
+	display_panel: panel@0 {
+		reg = <0>;
+		compatible = "lg,sw49410-lh609qh1", "lg,sw49410";
+
+		backlight = <&pmi8998_wled>;
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+		width-mm = <65>;
+		height-mm = <140>;
+
+		vsp-supply = <&lab>;
+		vsn-supply = <&ibb>;
+
+		pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>;
+		pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+	qcom,te-source = "mdp_vsync_e";
+};
+
 &ibb {
 	regulator-min-microvolt = <5500000>;
 	regulator-max-microvolt = <5500000>;
@@ -106,6 +149,27 @@ thinq_key_default: thinq-key-default-state {
 		drive-strength = <2>;
 		bias-pull-up;
 	};
+
+	sde_dsi_active: sde-dsi-active-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sde_dsi_sleep: sde-dsi-sleep-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_active_sleep: sde-te-active-sleep-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
 };
 
 &venus {

-- 
2.53.0

[PATCH v7 11/15] arm64: dts: qcom: sdm845-lg: Add wifi nodes

[Paul Sajna]

Wi-Fi now works with this patch, relevant firmware and
qcom,snoc-host-cap-skip-quirk

qcom,snoc-host-cap-skip-quirk has not been approved/merged in mainline,
so it is not included here.

ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40030001
ath10k_snoc 18800000.wifi: qmi fw_version 0x20060285 fw_build_timestamp 2020-10-12 23:35 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.2.0.c4-00645-QCAHLSWMTPLZ-1.336037.2
ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
ath10k_snoc 18800000.wifi: firmware ver  api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc 18800000.wifi: htt-ver 3.83 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
ath10k_snoc 18800000.wifi: invalid MAC address; choosing random

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
---
 arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 10 ++++++++++
 arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts  |  4 ++++
 arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts   |  4 ++++
 3 files changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 552d9719bede..8481f0cce974 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -670,3 +670,13 @@ &usb_1_qmpphy {
 &venus {
 	status = "okay";
 };
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
index 7948fe3dbaa2..adf41aa0146a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
@@ -175,3 +175,7 @@ sde_te_active_sleep: sde-te-active-sleep-state {
 &venus {
 	firmware-name = "qcom/sdm845/LG/judyln/venus.mbn";
 };
+
+&wifi {
+	qcom,calibration-variant = "lg_judyln";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
index efca260c3dcf..d244ebdd17be 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
@@ -56,3 +56,7 @@ &mss_pil {
 &venus {
 	firmware-name = "qcom/sdm845/LG/judyp/venus.mbn";
 };
+
+&wifi {
+	qcom,calibration-variant = "lg_judyp";
+};

-- 
2.53.0

[PATCH v7 12/15] arm64: dts: qcom: sdm845-lg-common: Add chassis-type

[Paul Sajna]

The sdm845-lg devices are all phones, therefore handset chassis

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
---
 arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 8481f0cce974..71d070619ad7 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -28,6 +28,8 @@
 /delete-node/ &wlan_msa_mem;
 
 / {
+	chassis-type = "handset";
+
 	aliases {
 		serial0 = &uart9;
 		serial1 = &uart6;

-- 
2.53.0

Re: [PATCH v7 00/15] arm64: dts: qcom: sdm845-lg: Improve hardware support in devicetree

[Bjorn Andersson]

On Tue, 31 Mar 2026 20:15:05 -0700, Paul Sajna wrote:
> Rollup of improved hardware support via devicetree for LG G7 ThinQ
> (judyln) from sdm845-mainline kernel fork
> 
> Notably, this patch-series enables full DRM acceleration and wifi,
> among other small improvements in individual commits
> 
> after this patch-series the main things that remain to be worked
> on include touchscreen, audio, and modem.
> 
> [...]

Applied, thanks!

[01/15] arm64: dts: qcom: sdm845-lg-common: Sort nodes and properties
        commit: 6a9e8df732014c1c758bd3cd6254b5b4cb273c7f
[02/15] arm64: dts: qcom: sdm845-lg-judyln: Add firmware nodes, change path
        commit: b9afe8581c0e14b7b56e2314dc7f9597bf23ef67
[03/15] arm64: dts: qcom: sdm845-lg-judyp: Define firmware paths for judyp
        commit: 8f4c53ae286bd6a113245ad53ce957e623374cf0
[04/15] arm64: dts: qcom: sdm845-lg-common: Enable venus
        commit: e9f611de7ab51540c0cf246df6b7d4d99f4cec64
[05/15] arm64: dts: qcom: sdm845-lg-common: Enable qups and their dma controllers
        commit: 4ec3045c969a326c458c53ca65bde5749e575d52
[06/15] arm64: dts: qcom: sdm845-lg: Add uarts and Bluetooth
        commit: e746ed5af3084e9534135679c55e69eced0c657f
[07/15] arm64: dts: qcom: sdm845-lg-judyln: Add battery and charger
        commit: 995c258982429db93db103fc26fcb3a0acd6a5ee
[08/15] arm64: dts: qcom: sdm845-lg-common: Add LEDs
        commit: b49722c8a18cdd11f49357f3b8be23549f76a506
[09/15] arm64: dts: qcom: sdm845-lg-judyln: Add lab/ibb
        commit: 2e7cdd400b6a4e67c27fc3e839342824b51d01ff
[10/15] arm64: dts: qcom: sdm845-lg-judyln: Add display panel
        commit: c6c66aa3ef33dc3076c6dac64003b29bd9515b58
[11/15] arm64: dts: qcom: sdm845-lg: Add wifi nodes
        commit: eb8fa32085261a07d763e9d616b3c206d0be82ff
[12/15] arm64: dts: qcom: sdm845-lg-common: Add chassis-type
        commit: a5a5ad9848980e1019ca841fe057afb83debecfa

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

Re: [PATCH v7 00/15] arm64: dts: qcom: sdm845-lg: Improve hardware support in devicetree

[Paul Sajna]

April 5, 2026 at 7:40 PM, "Bjorn Andersson" <andersson@kernel.org mailto:andersson@kernel.org?to=%22Bjorn%20Andersson%22%20%3Candersson%40kernel.org%3E > wrote:
> Applied, thanks!
> 
> [01/15] arm64: dts: qcom: sdm845-lg-common: Sort nodes and properties
>  commit: 6a9e8df732014c1c758bd3cd6254b5b4cb273c7f
> [02/15] arm64: dts: qcom: sdm845-lg-judyln: Add firmware nodes, change path
>  commit: b9afe8581c0e14b7b56e2314dc7f9597bf23ef67
> [03/15] arm64: dts: qcom: sdm845-lg-judyp: Define firmware paths for judyp
>  commit: 8f4c53ae286bd6a113245ad53ce957e623374cf0
> [04/15] arm64: dts: qcom: sdm845-lg-common: Enable venus
>  commit: e9f611de7ab51540c0cf246df6b7d4d99f4cec64
> [05/15] arm64: dts: qcom: sdm845-lg-common: Enable qups and their dma controllers
>  commit: 4ec3045c969a326c458c53ca65bde5749e575d52
> [06/15] arm64: dts: qcom: sdm845-lg: Add uarts and Bluetooth
>  commit: e746ed5af3084e9534135679c55e69eced0c657f
> [07/15] arm64: dts: qcom: sdm845-lg-judyln: Add battery and charger
>  commit: 995c258982429db93db103fc26fcb3a0acd6a5ee
> [08/15] arm64: dts: qcom: sdm845-lg-common: Add LEDs
>  commit: b49722c8a18cdd11f49357f3b8be23549f76a506
> [09/15] arm64: dts: qcom: sdm845-lg-judyln: Add lab/ibb
>  commit: 2e7cdd400b6a4e67c27fc3e839342824b51d01ff
> [10/15] arm64: dts: qcom: sdm845-lg-judyln: Add display panel
>  commit: c6c66aa3ef33dc3076c6dac64003b29bd9515b58
> [11/15] arm64: dts: qcom: sdm845-lg: Add wifi nodes
>  commit: eb8fa32085261a07d763e9d616b3c206d0be82ff
> [12/15] arm64: dts: qcom: sdm845-lg-common: Add chassis-type
>  commit: a5a5ad9848980e1019ca841fe057afb83debecfa

I'm new at this, so there might be some mistakes/misunderstandings, but I sent a v8 with 1 tiny change for Konrad you might want to apply that instead. 
And also the last 3 patches that got stuck in my mailserver didn't apply? I resent them manually with git send-email.

Re: [PATCH v7 00/15] arm64: dts: qcom: sdm845-lg: Improve hardware support in devicetree

[Paul Sajna]

April 5, 2026 at 7:40 PM, "Bjorn Andersson" <andersson@kernel.org mailto:andersson@kernel.org?to=%22Bjorn%20Andersson%22%20%3Candersson%40kernel.org%3E > wrote:

> Applied, thanks!
> 
> [01/15] arm64: dts: qcom: sdm845-lg-common: Sort nodes and properties
>  commit: 6a9e8df732014c1c758bd3cd6254b5b4cb273c7f
> [02/15] arm64: dts: qcom: sdm845-lg-judyln: Add firmware nodes, change path
>  commit: b9afe8581c0e14b7b56e2314dc7f9597bf23ef67
> [03/15] arm64: dts: qcom: sdm845-lg-judyp: Define firmware paths for judyp
>  commit: 8f4c53ae286bd6a113245ad53ce957e623374cf0
> [04/15] arm64: dts: qcom: sdm845-lg-common: Enable venus
>  commit: e9f611de7ab51540c0cf246df6b7d4d99f4cec64
> [05/15] arm64: dts: qcom: sdm845-lg-common: Enable qups and their dma controllers
>  commit: 4ec3045c969a326c458c53ca65bde5749e575d52
> [06/15] arm64: dts: qcom: sdm845-lg: Add uarts and Bluetooth
>  commit: e746ed5af3084e9534135679c55e69eced0c657f
> [07/15] arm64: dts: qcom: sdm845-lg-judyln: Add battery and charger
>  commit: 995c258982429db93db103fc26fcb3a0acd6a5ee
> [08/15] arm64: dts: qcom: sdm845-lg-common: Add LEDs
>  commit: b49722c8a18cdd11f49357f3b8be23549f76a506
> [09/15] arm64: dts: qcom: sdm845-lg-judyln: Add lab/ibb
>  commit: 2e7cdd400b6a4e67c27fc3e839342824b51d01ff
> [10/15] arm64: dts: qcom: sdm845-lg-judyln: Add display panel
>  commit: c6c66aa3ef33dc3076c6dac64003b29bd9515b58
> [11/15] arm64: dts: qcom: sdm845-lg: Add wifi nodes
>  commit: eb8fa32085261a07d763e9d616b3c206d0be82ff
> [12/15] arm64: dts: qcom: sdm845-lg-common: Add chassis-type
>  commit: a5a5ad9848980e1019ca841fe057afb83debecfa
> 
> Best regards,
> -- 
> Bjorn Andersson <andersson@kernel.org>
>

Please apply 13-15. 15 is the only change in v8, so what you've pulled here from v7 is fine.

Re: [PATCH v7 00/15] arm64: dts: qcom: sdm845-lg: Improve hardware support in devicetree

[Konrad Dybcio]

On 4/6/26 5:30 PM, Paul Sajna wrote:
> April 5, 2026 at 7:40 PM, "Bjorn Andersson" <andersson@kernel.org mailto:andersson@kernel.org?to=%22Bjorn%20Andersson%22%20%3Candersson%40kernel.org%3E > wrote:
> 
>> Applied, thanks!
>>
>> [01/15] arm64: dts: qcom: sdm845-lg-common: Sort nodes and properties
>>  commit: 6a9e8df732014c1c758bd3cd6254b5b4cb273c7f
>> [02/15] arm64: dts: qcom: sdm845-lg-judyln: Add firmware nodes, change path
>>  commit: b9afe8581c0e14b7b56e2314dc7f9597bf23ef67
>> [03/15] arm64: dts: qcom: sdm845-lg-judyp: Define firmware paths for judyp
>>  commit: 8f4c53ae286bd6a113245ad53ce957e623374cf0
>> [04/15] arm64: dts: qcom: sdm845-lg-common: Enable venus
>>  commit: e9f611de7ab51540c0cf246df6b7d4d99f4cec64
>> [05/15] arm64: dts: qcom: sdm845-lg-common: Enable qups and their dma controllers
>>  commit: 4ec3045c969a326c458c53ca65bde5749e575d52
>> [06/15] arm64: dts: qcom: sdm845-lg: Add uarts and Bluetooth
>>  commit: e746ed5af3084e9534135679c55e69eced0c657f
>> [07/15] arm64: dts: qcom: sdm845-lg-judyln: Add battery and charger
>>  commit: 995c258982429db93db103fc26fcb3a0acd6a5ee
>> [08/15] arm64: dts: qcom: sdm845-lg-common: Add LEDs
>>  commit: b49722c8a18cdd11f49357f3b8be23549f76a506
>> [09/15] arm64: dts: qcom: sdm845-lg-judyln: Add lab/ibb
>>  commit: 2e7cdd400b6a4e67c27fc3e839342824b51d01ff
>> [10/15] arm64: dts: qcom: sdm845-lg-judyln: Add display panel
>>  commit: c6c66aa3ef33dc3076c6dac64003b29bd9515b58
>> [11/15] arm64: dts: qcom: sdm845-lg: Add wifi nodes
>>  commit: eb8fa32085261a07d763e9d616b3c206d0be82ff
>> [12/15] arm64: dts: qcom: sdm845-lg-common: Add chassis-type
>>  commit: a5a5ad9848980e1019ca841fe057afb83debecfa
>>
>> Best regards,
>> -- 
>> Bjorn Andersson <andersson@kernel.org>
>>
> 
> Please apply 13-15. 15 is the only change in v8, so what you've pulled here from v7 is fine.

Please send incremental changes on top of -next if you feel they're
valuable

Konrad

Re: [PATCH v7 00/15] arm64: dts: qcom: sdm845-lg: Improve hardware support in devicetree

[Rob Herring]

On Tue, Mar 31, 2026 at 08:15:05PM -0700, Paul Sajna wrote:
> Rollup of improved hardware support via devicetree for LG G7 ThinQ
> (judyln) from sdm845-mainline kernel fork
> 
> Notably, this patch-series enables full DRM acceleration and wifi,
> among other small improvements in individual commits
> 
> after this patch-series the main things that remain to be worked
> on include touchscreen, audio, and modem.
> 
> Depends upon panel driver patch-series https://lore.kernel.org/all/20250910-judyln-panel-v1-1-825c74403bbb@postmarketos.org/T/#r9a976ca01e309b6c03100e984a26a0ffc2fe2002

Generally no one is going to look at nor apply a 7 month old series. 
Anything not based on the current rc1 should be resent. Also, that's v1, 
not v2 that you sent.

However, the .dts change was applied and now there's a warning and I 
ended up here. So I've applied the binding change. You can resend the 
driver changes if you want your display to work.

Rob