Re: [PATCH v2 3/6] iio: accel: mma8452: use local struct device

[Jonathan Cameron <jic23@kernel.org>]

On Wed, 22 Apr 2026 22:35:33 +0300
Andy Shevchenko <andriy.shevchenko@intel.com> wrote:

> On Wed, Apr 22, 2026 at 10:26:40PM +0530, Sanjay Chitroda wrote:
> 
> > Introduce a local struct device pointer derived from &client->dev.
> > This avoids repeated &client->dev usage and improves readability.  
> 
> ...
> 
> > static int mma8452_set_runtime_pm_state(struct i2c_client *client, bool on)
> >  {
> >  #ifdef CONFIG_PM  
> 
> So, this seems to be a missed in the PM patch.

Get rid of this function as part of that cleanup. Having the runtime pm calls
inline is going to be cleaner.

> 
> >  	int ret;
> > +	struct device *dev = &client->dev;  
> 
> Keep it in reversed xmas tree order.
> 
> >  	if (on)
> > -		ret = pm_runtime_resume_and_get(&client->dev);
> > +		ret = pm_runtime_resume_and_get(dev);
> >  	else
> > -		ret = pm_runtime_put_autosuspend(&client->dev);
> > +		ret = pm_runtime_put_autosuspend(dev);
> >  	if (ret < 0) {
> > -		dev_err(&client->dev,
> > +		dev_err(dev,
> >  			"failed to change power state to %d\n", on);
> >  
> >  		return ret;  
> 
> >  }  
> 
> ...
> 
> >  static int mma8452_probe(struct i2c_client *client)
> >  {
> >  	struct mma8452_data *data;
> > +	struct device *dev = &client->dev;  
> 
> Same here, reversed xmas tree order.
> 
> >  	struct iio_dev *indio_dev;
> >  	int ret;  
> 
> ...
> 
> >  	data->chip_info = i2c_get_match_data(client);
> >  	if (!data->chip_info)
> > -		return dev_err_probe(&client->dev, -ENODEV,
> > +		return dev_err_probe(dev, -ENODEV,
> >  				     "unknown device model\n");  
> 
> Now it's a single line.
> 
> ...
> 
> >  	ret = regulator_enable(data->vdd_reg);
> >  	if (ret) {
> > -		dev_err(&client->dev, "failed to enable VDD regulator!\n");
> > +		dev_err(dev, "failed to enable VDD regulator!\n");
> >  		return ret;  
> 
> Convert this to dev_err_probe() before doing this patch. In that patch you
> introduce temporary dev variable already. Here will use in the other places.
> 
> >  	}
> >  
> >  	ret = regulator_enable(data->vddio_reg);
> >  	if (ret) {
> > -		dev_err(&client->dev, "failed to enable VDDIO regulator!\n");
> > +		dev_err(dev, "failed to enable VDDIO regulator!\n");
> >  		goto disable_regulator_vdd;  
> 
> Ditto.
> 
> >  	}  
> 
> ...
> 
> > +	pm_runtime_set_autosuspend_delay(dev,
> >  					 MMA8452_AUTO_SUSPEND_DELAY_MS);  
> 
> Now a single line.
>