[PATCH] clk: davinci: add Kconfig symbol

[Rosen Penev <rosenp@gmail.com>]

Add COMPILE_TEST support as a result so that the buildbots can run
through this driver. There's nothing architecture specific about it.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/clk/Kconfig          | 7 +++++++
 drivers/clk/Makefile         | 2 +-
 drivers/clk/davinci/Makefile | 6 +++---
 3 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 06a7ac971edf..42d84c0ed5fc 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -317,6 +317,13 @@ config COMMON_CLK_AXI_CLKGEN
 	  Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
 	  FPGAs. It is commonly used in Analog Devices' reference designs.
 
+config CLK_DA850
+	bool "DaVinci DA850 CLK support"
+	depends on ARCH_DAVINCI_DA850 || COMPILE_TEST
+	help
+	  This adds the clock driver support for DaVinci DA850 platform
+	  using common clock framework.
+
 config CLK_QORIQ
 	bool "Clock driver for Freescale QorIQ platforms"
 	depends on OF
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 0fc8f20b0fb1..6e13c001a544 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -118,7 +118,7 @@ obj-$(CONFIG_ARCH_ARTPEC)		+= axis/
 obj-$(CONFIG_ARC_PLAT_AXS10X)		+= axs10x/
 obj-y					+= bcm/
 obj-$(CONFIG_ARCH_BERLIN)		+= berlin/
-obj-$(CONFIG_ARCH_DAVINCI)		+= davinci/
+obj-$(CONFIG_CLK_DAVINCI)		+= davinci/
 obj-$(CONFIG_COMMON_CLK_ESWIN)		+= eswin/
 obj-$(CONFIG_ARCH_HISI)			+= hisilicon/
 obj-y					+= imgtec/
diff --git a/drivers/clk/davinci/Makefile b/drivers/clk/davinci/Makefile
index f9d5c9a392e4..5ff30ceb2092 100644
--- a/drivers/clk/davinci/Makefile
+++ b/drivers/clk/davinci/Makefile
@@ -1,11 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
 
 ifeq ($(CONFIG_COMMON_CLK), y)
-obj-$(CONFIG_ARCH_DAVINCI_DA8XX)	+= da8xx-cfgchip.o
+obj-$(CONFIG_CLK_DA850)		+= da8xx-cfgchip.o
 
 obj-y += pll.o
-obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= pll-da850.o
+obj-$(CONFIG_CLK_DA850)		+= pll-da850.o
 
 obj-y += psc.o
-obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= psc-da850.o
+obj-$(CONFIG_CLK_DA850)		+= psc-da850.o
 endif
-- 
2.54.0