public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH v1 1/1] MAINTAINERS: Add Intel LPSS section to follow the changes
@ 2026-04-29  9:42 Andy Shevchenko
  0 siblings, 0 replies; only message in thread
From: Andy Shevchenko @ 2026-04-29  9:42 UTC (permalink / raw)
  To: linux-kernel; +Cc: Lee Jones, Andy Shevchenko

Add Intel LPSS section to follow the changes in the related drivers.
These are all for the Intel SoCs and platforms starting from Sky Lake.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---

Supposed to go via MFD as the main driver in the whole set is in MFD.
Motivation is to follow the not previously described PWM, DMA, and MFD.
I missed a recent patch against intel-lpss-acpi.c, discovered by a link
from Hans for another matters.

In the future the list of the reviewers/maintainers may be adjusted
accordingly.

 MAINTAINERS | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index e2824e2a24a4..dcbf984c8afd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13098,6 +13098,17 @@ F:	drivers/spi/spi-ljca.c
 F:	drivers/usb/misc/usb-ljca.c
 F:	include/linux/usb/ljca.h
 
+INTEL LPSS (Low Power SubSystem) DRIVERS
+R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+S:	Supported
+F:	drivers/dma/idma64*
+F:	drivers/i2c/busses/i2c-designware-*
+F:	drivers/mfd/intel-lpss*
+F:	drivers/pwm/pwm-lpss*
+F:	drivers/tty/serial/8250/8250_dw.c
+F:	drivers/tty/serial/8250/8250_dwlib.*
+F:	drivers/spi/spi-pxa2xx*
+
 INTEL MANAGEMENT ENGINE (mei)
 M:	Alexander Usyskin <alexander.usyskin@intel.com>
 L:	linux-kernel@vger.kernel.org
-- 
2.50.1


^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2026-04-29  9:45 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-04-29  9:42 [PATCH v1 1/1] MAINTAINERS: Add Intel LPSS section to follow the changes Andy Shevchenko

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox