[PATCH] nfc: trf7970a: fix comment typos

[PATCH] nfc: trf7970a: fix comment typos

[Miles Krause]

Fix a few spelling mistakes in comments.

Signed-off-by: Miles Krause <mileskrause5200@gmail.com>
---
 drivers/nfc/trf7970a.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c
index 08c27bb438b5..f22e091019de 100644
--- a/drivers/nfc/trf7970a.c
+++ b/drivers/nfc/trf7970a.c
@@ -61,15 +61,15 @@
  * support that.  So, if an abort is received before trf7970a_send_cmd()
  * has sent the command to the tag, it simply returns -ECANCELED.  If the
  * command has already been sent to the tag, then the driver continues
- * normally and recieves the response data (or error) but just before
+ * normally and receives the response data (or error) but just before
  * sending the data upstream, it frees the rx_skb and sends -ECANCELED
  * upstream instead.  If the command failed, that error will be sent
  * upstream.
  *
- * When recieving data from a tag and the interrupt status register has
+ * When receiving data from a tag and the interrupt status register has
  * only the SRX bit set, it means that all of the data has been received
  * (once what's in the fifo has been read).  However, depending on timing
- * an interrupt status with only the SRX bit set may not be recived.  In
+ * an interrupt status with only the SRX bit set may not be received.  In
  * those cases, the timeout mechanism is used to wait 20 ms in case more
  * data arrives.  After 20 ms, it is assumed that all of the data has been
  * received and the accumulated rx data is sent upstream.  The

base-commit: 08d0d3466664000ba0670e0ef0d447f23459e0d4
-- 
2.54.0