[PATCH 5/6] riscv: dts: spacemit: k1-musepi-pro: enable PCIe ports

[Andre Heider <a.heider@gmail.com>]

Enable the two PCIe controller along with and their associated PHYs. They
are routed to the M.2 M-key connector and to the PCIe slot.

Signed-off-by: Andre Heider <a.heider@gmail.com>
---
 .../riscv/boot/dts/spacemit/k1-musepi-pro.dts | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
index 869172d23e259..3ba6244952b63 100644
--- a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
@@ -36,6 +36,24 @@ led1 {
 		};
 	};
 
+	pcie_vcc_3v3: regulator-pcie-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIE_VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_usb_vbus>;
+	};
+
+	mpcie_vcc_3v3: regulator-mpcie-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MPCIE_VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_usb_vbus>;
+	};
+
 	reg_usb_vbus: regulator-usb-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "USBVBUS";
@@ -275,6 +293,38 @@ dldo7 {
 	};
 };
 
+&pcie1_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_3_cfg>;
+	status = "okay";
+};
+
+&pcie1_port {
+	phys = <&pcie1_phy>;
+	vpcie3v3-supply = <&pcie_vcc_3v3>;
+};
+
+&pcie1 {
+	vpcie3v3-supply = <&pcie_vcc_3v3>;
+	status = "okay";
+};
+
+&pcie2_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_4_cfg>;
+	status = "okay";
+};
+
+&pcie2_port {
+	phys = <&pcie2_phy>;
+	vpcie3v3-supply = <&mpcie_vcc_3v3>;
+};
+
+&pcie2 {
+	vpcie3v3-supply = <&mpcie_vcc_3v3>;
+	status = "okay";
+};
+
 &qspi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&qspi_cfg>;
-- 
2.53.0