From: phucduc.bui@gmail.com
To: Olivier Moysan <olivier.moysan@foss.st.com>,
Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>,
Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
linux-sound@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 2/4] ASoC: stm: stm32_i2s: Use guard() for spin locks
Date: Wed, 13 May 2026 17:43:27 +0700 [thread overview]
Message-ID: <20260513104329.81592-3-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260513104329.81592-1-phucduc.bui@gmail.com>
From: bui duc phuc <phucduc.bui@gmail.com>
Clean up the code using guard() for spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
sound/soc/stm/stm32_i2s.c | 67 ++++++++++++++++++---------------------
1 file changed, 30 insertions(+), 37 deletions(-)
diff --git a/sound/soc/stm/stm32_i2s.c b/sound/soc/stm/stm32_i2s.c
index 6ca21780f21d..4fddb7ecd7fd 100644
--- a/sound/soc/stm/stm32_i2s.c
+++ b/sound/soc/stm/stm32_i2s.c
@@ -615,10 +615,10 @@ static irqreturn_t stm32_i2s_isr(int irq, void *devid)
if (flags & I2S_SR_TIFRE)
dev_dbg(&pdev->dev, "Frame error\n");
- spin_lock(&i2s->irq_lock);
- if (err && i2s->substream)
- snd_pcm_stop_xrun(i2s->substream);
- spin_unlock(&i2s->irq_lock);
+ scoped_guard(spinlock, &i2s->irq_lock) {
+ if (err && i2s->substream)
+ snd_pcm_stop_xrun(i2s->substream);
+ }
return IRQ_HANDLED;
}
@@ -905,12 +905,10 @@ static int stm32_i2s_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *cpu_dai)
{
struct stm32_i2s_data *i2s = snd_soc_dai_get_drvdata(cpu_dai);
- unsigned long flags;
int ret;
- spin_lock_irqsave(&i2s->irq_lock, flags);
- i2s->substream = substream;
- spin_unlock_irqrestore(&i2s->irq_lock, flags);
+ scoped_guard(spinlock_irqsave, &i2s->irq_lock)
+ i2s->substream = substream;
if ((i2s->fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_DSP_A)
snd_pcm_hw_constraint_single(substream->runtime,
@@ -982,19 +980,19 @@ static int stm32_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
regmap_write_bits(i2s->regmap, STM32_I2S_IFCR_REG,
I2S_IFCR_MASK, I2S_IFCR_MASK);
- spin_lock(&i2s->lock_fd);
- i2s->refcount++;
- if (playback_flg) {
- ier = I2S_IER_UDRIE;
- } else {
- ier = I2S_IER_OVRIE;
-
- if (STM32_I2S_IS_MASTER(i2s) && i2s->refcount == 1)
- /* dummy write to gate bus clocks */
- regmap_write(i2s->regmap,
- STM32_I2S_TXDR_REG, 0);
+ scoped_guard(spinlock, &i2s->lock_fd) {
+ i2s->refcount++;
+ if (playback_flg) {
+ ier = I2S_IER_UDRIE;
+ } else {
+ ier = I2S_IER_OVRIE;
+
+ if (STM32_I2S_IS_MASTER(i2s) && i2s->refcount == 1)
+ /* dummy write to gate bus clocks */
+ regmap_write(i2s->regmap,
+ STM32_I2S_TXDR_REG, 0);
+ }
}
- spin_unlock(&i2s->lock_fd);
if (STM32_I2S_IS_SLAVE(i2s))
ier |= I2S_IER_TIFREIE;
@@ -1016,21 +1014,18 @@ static int stm32_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
I2S_IER_OVRIE,
(unsigned int)~I2S_IER_OVRIE);
- spin_lock(&i2s->lock_fd);
- i2s->refcount--;
- if (i2s->refcount) {
- spin_unlock(&i2s->lock_fd);
- break;
- }
+ scoped_guard(spinlock, &i2s->lock_fd) {
+ i2s->refcount--;
+ if (i2s->refcount)
+ break;
- ret = regmap_update_bits(i2s->regmap, STM32_I2S_CR1_REG,
- I2S_CR1_SPE, 0);
- if (ret < 0) {
- dev_err(cpu_dai->dev, "Error %d disabling I2S\n", ret);
- spin_unlock(&i2s->lock_fd);
- return ret;
+ ret = regmap_update_bits(i2s->regmap, STM32_I2S_CR1_REG,
+ I2S_CR1_SPE, 0);
+ if (ret < 0) {
+ dev_err(cpu_dai->dev, "Error %d disabling I2S\n", ret);
+ return ret;
+ }
}
- spin_unlock(&i2s->lock_fd);
cfg1_mask = I2S_CFG1_RXDMAEN | I2S_CFG1_TXDMAEN;
regmap_update_bits(i2s->regmap, STM32_I2S_CFG1_REG,
@@ -1047,7 +1042,6 @@ static void stm32_i2s_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *cpu_dai)
{
struct stm32_i2s_data *i2s = snd_soc_dai_get_drvdata(cpu_dai);
- unsigned long flags;
clk_disable_unprepare(i2s->i2sclk);
@@ -1059,9 +1053,8 @@ static void stm32_i2s_shutdown(struct snd_pcm_substream *substream,
if (!i2s->i2smclk && i2s->put_i2s_clk_rate)
i2s->put_i2s_clk_rate(i2s);
- spin_lock_irqsave(&i2s->irq_lock, flags);
- i2s->substream = NULL;
- spin_unlock_irqrestore(&i2s->irq_lock, flags);
+ scoped_guard(spinlock_irqsave, &i2s->irq_lock)
+ i2s->substream = NULL;
}
static int stm32_i2s_dai_probe(struct snd_soc_dai *cpu_dai)
--
2.43.0
next prev parent reply other threads:[~2026-05-13 10:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-13 10:43 [PATCH 0/4] ASoC: stm: Use guard() for mutex & spin locks phucduc.bui
2026-05-13 10:43 ` [PATCH 1/4] ASoC: stm: stm32_adfsdm: Use guard() for mutex locks phucduc.bui
2026-05-13 10:43 ` phucduc.bui [this message]
2026-05-13 10:43 ` [PATCH 3/4] ASoC: stm: stm32_sai_sub: Use guard() for mutex & spin locks phucduc.bui
2026-05-13 10:43 ` [PATCH 4/4] ASoC: stm: stm32_spdifrx: Use guard() for " phucduc.bui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260513104329.81592-3-phucduc.bui@gmail.com \
--to=phucduc.bui@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=arnaud.pouliquen@foss.st.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=olivier.moysan@foss.st.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox