From: phucduc.bui@gmail.com
To: Mark Brown <broonie@kernel.org>,
Liam Girdwood <liam.r.girdwood@linux.intel.com>,
Cezary Rojewski <cezary.rojewski@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Peter Ujfalusi <peter.ujfalusi@linux.intel.com>,
Bard Liao <yung-chuan.liao@linux.intel.com>,
Kai Vehmanen <kai.vehmanen@linux.intel.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 00/20] ASoC: Intel: Use guard() for mutex & spin locks
Date: Thu, 11 Jun 2026 18:58:41 +0700 [thread overview]
Message-ID: <20260611115901.80438-1-phucduc.bui@gmail.com> (raw)
From: bui duc phuc <phucduc.bui@gmail.com>
Hi all,
This series converts mutex and spinlock handling in Intel ASoC drivers
to use guard()/scoped_guard() helpers.
Most patches are straightforward conversions. A few patches include
small cleanup changes as part of the conversion process; these are
documented in the individual commit messages. Overall, the series is
intended to simplify the code and cleanup paths, with no behavioral
changes to the affected functions.
The series has been compile-tested only.
Best regards,
Phuc
bui duc phuc (20):
ASoC: Intel: catpt: ipc: Use guard() for mutex & spin locks
ASoC: Intel: catpt: dsp: Use guard() for mutex locks
ASoC: Intel: avs: utils: Use guard() for mutex locks
ASoC: Intel: avs: probes: Use guard() for spin locks
ASoC: Intel: avs: pcm: Use guard() for mutex & spin locks
ASoC: Intel: avs: path: Use guard() for mutex & spin locks
ASoC: Intel: avs: loader: Use guard() for mutex locks
ASoC: Intel: avs: ipc: Use guard() for mutex & spin locks
ASoC: Intel: avs: icl: Use guard() for spin locks
ASoC: Intel: avs: debugfs: Use guard() for spin locks
ASoC: Intel: avs: debug: Use guard() for spin locks
ASoC: Intel: avs: core: Use guard() for mutex & spin locks
ASoC: Intel: avs: control: Use guard() for spin locks
ASoC: Intel: avs: apl: Use guard() for spin locks
ASoC: Intel: atom: sst_stream: Use guard() for mutex locks
ASoC: Intel: atom: sst_pvt: Use guard() for mutex & spin locks
ASoC: Intel: atom: sst: Use guard() for spin locks
ASoC: Intel: atom: sst-atom-controls: Use guard() for mutex locks
ASoC: Intel: atom: sst-mfld-platform-pcm: Use guard() for mutex & spin
locks
ASoC: Intel: atom: sst_ipc: Use guard() for spin locks
sound/soc/intel/atom/sst-atom-controls.c | 85 +++++++--------
sound/soc/intel/atom/sst-mfld-platform-pcm.c | 51 ++++-----
sound/soc/intel/atom/sst/sst.c | 37 ++++---
sound/soc/intel/atom/sst/sst_ipc.c | 9 +-
sound/soc/intel/atom/sst/sst_pvt.c | 19 ++--
sound/soc/intel/atom/sst/sst_stream.c | 52 ++++-----
sound/soc/intel/avs/apl.c | 7 +-
sound/soc/intel/avs/control.c | 7 +-
sound/soc/intel/avs/core.c | 11 +-
sound/soc/intel/avs/debug.h | 9 +-
sound/soc/intel/avs/debugfs.c | 18 ++--
sound/soc/intel/avs/icl.c | 10 +-
sound/soc/intel/avs/ipc.c | 105 +++++++++----------
sound/soc/intel/avs/loader.c | 14 +--
sound/soc/intel/avs/path.c | 39 +++----
sound/soc/intel/avs/pcm.c | 21 ++--
sound/soc/intel/avs/probes.c | 11 +-
sound/soc/intel/avs/utils.c | 39 +++----
sound/soc/intel/catpt/dsp.c | 11 +-
sound/soc/intel/catpt/ipc.c | 12 +--
20 files changed, 231 insertions(+), 336 deletions(-)
--
2.43.0
next reply other threads:[~2026-06-11 11:59 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-11 11:58 phucduc.bui [this message]
2026-06-11 11:58 ` [PATCH 01/20] ASoC: Intel: catpt: ipc: Use guard() for mutex & spin locks phucduc.bui
2026-06-11 18:44 ` Cezary Rojewski
2026-06-11 11:58 ` [PATCH 02/20] ASoC: Intel: catpt: dsp: Use guard() for mutex locks phucduc.bui
2026-06-11 18:39 ` Cezary Rojewski
2026-06-11 11:58 ` [PATCH 03/20] ASoC: Intel: avs: utils: " phucduc.bui
2026-06-11 11:58 ` [PATCH 04/20] ASoC: Intel: avs: probes: Use guard() for spin locks phucduc.bui
2026-06-11 19:34 ` Cezary Rojewski
2026-06-11 11:58 ` [PATCH 05/20] ASoC: Intel: avs: pcm: Use guard() for mutex & " phucduc.bui
2026-06-11 11:58 ` [PATCH 06/20] ASoC: Intel: avs: path: " phucduc.bui
2026-06-11 11:58 ` [PATCH 07/20] ASoC: Intel: avs: loader: Use guard() for mutex locks phucduc.bui
2026-06-11 11:58 ` [PATCH 08/20] ASoC: Intel: avs: ipc: Use guard() for mutex & spin locks phucduc.bui
2026-06-11 11:58 ` [PATCH 09/20] ASoC: Intel: avs: icl: Use guard() for " phucduc.bui
2026-06-11 11:58 ` [PATCH 10/20] ASoC: Intel: avs: debugfs: " phucduc.bui
2026-06-11 11:58 ` [PATCH 11/20] ASoC: Intel: avs: debug: " phucduc.bui
2026-06-11 11:58 ` [PATCH 12/20] ASoC: Intel: avs: core: Use guard() for mutex & " phucduc.bui
2026-06-11 11:58 ` [PATCH 13/20] ASoC: Intel: avs: control: Use guard() for " phucduc.bui
2026-06-11 11:58 ` [PATCH 14/20] ASoC: Intel: avs: apl: " phucduc.bui
2026-06-11 11:58 ` [PATCH 15/20] ASoC: Intel: atom: sst_stream: Use guard() for mutex locks phucduc.bui
2026-06-11 11:58 ` [PATCH 16/20] ASoC: Intel: atom: sst_pvt: Use guard() for mutex & spin locks phucduc.bui
2026-06-11 11:58 ` [PATCH 17/20] ASoC: Intel: atom: sst: Use guard() for " phucduc.bui
2026-06-11 11:58 ` [PATCH 18/20] ASoC: Intel: atom: sst-atom-controls: Use guard() for mutex locks phucduc.bui
2026-06-11 11:59 ` [PATCH 19/20] ASoC: Intel: atom: sst-mfld-platform-pcm: Use guard() for mutex & spin locks phucduc.bui
2026-06-11 11:59 ` [PATCH 20/20] ASoC: Intel: atom: sst_ipc: Use guard() for " phucduc.bui
2026-06-11 19:04 ` [PATCH 00/20] ASoC: Intel: Use guard() for mutex & " Cezary Rojewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260611115901.80438-1-phucduc.bui@gmail.com \
--to=phucduc.bui@gmail.com \
--cc=broonie@kernel.org \
--cc=cezary.rojewski@intel.com \
--cc=kai.vehmanen@linux.intel.com \
--cc=liam.r.girdwood@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=peter.ujfalusi@linux.intel.com \
--cc=pierre-louis.bossart@linux.dev \
--cc=tiwai@suse.com \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox