From: Yosry Ahmed <yosry@kernel.org>
To: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Jim Mattson <jmattson@google.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Yosry Ahmed <yosry@kernel.org>
Subject: [RFC PATCH v2 06/25] KVM: SVM: Fallback to flush everything if FLUSHBYASID is not available
Date: Tue, 16 Jun 2026 00:41:35 +0000 [thread overview]
Message-ID: <20260616004155.1435766-7-yosry@kernel.org> (raw)
In-Reply-To: <20260616004155.1435766-1-yosry@kernel.org>
Currently, if FLUSHBYASID is not available when performing a TLB flush,
the fallback is decrementing the ASID generation to trigger allocating a
new ASID. In preparation for using a static ASID per vCPU (like VMX),
just fallback to flushing everything if FLUSHBYASID is not available.
This is probably worse from a performance perspective, but FLUSHBYASID
has been around for ~15 years and it's not worth carrying the
complexity.
The fallback logic is moved within vmcb_set_flush_asid(), as more
callers will be added and will need the fallback as well. The only other
current caller is from SEV code, and no CPUs support SEV but not
FLUSHBYASID (at least according to AI).
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
---
arch/x86/kvm/svm/svm.c | 5 +----
arch/x86/kvm/svm/svm.h | 5 ++++-
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index a7cc3cb101e57..159abf841738f 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -4185,10 +4185,7 @@ static void svm_flush_tlb_asid(struct kvm_vcpu *vcpu)
* unconditionally does a TLB flush on both nested VM-Enter and nested
* VM-Exit (via kvm_mmu_reset_context()).
*/
- if (static_cpu_has(X86_FEATURE_FLUSHBYASID))
- vmcb_set_flush_asid(svm->vmcb);
- else
- svm->current_vmcb->asid_generation--;
+ vmcb_set_flush_asid(svm->vmcb);
}
static void svm_flush_tlb_current(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index 5b4613b4d7bc2..4bf8afdc77cbd 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -478,7 +478,10 @@ static inline void vmcb_set_gpat(struct vmcb *vmcb, u64 data)
static inline void vmcb_set_flush_asid(struct vmcb *vmcb)
{
- vmcb->control.tlb_ctl = TLB_CONTROL_FLUSH_ASID;
+ if (static_cpu_has(X86_FEATURE_FLUSHBYASID))
+ vmcb->control.tlb_ctl = TLB_CONTROL_FLUSH_ASID;
+ else
+ vmcb->control.tlb_ctl = TLB_CONTROL_FLUSH_ALL_ASID;
}
static inline void vmcb_clr_flush_asid(struct vmcb *vmcb)
--
2.54.0.1136.gdb2ca164c4-goog
next prev parent reply other threads:[~2026-06-16 0:42 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-16 0:41 [RFC PATCH v2 00/25] Optimize nSVM TLB flushes Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 01/25] KVM: nSVM: Flush the TLB after forcefully leaving nested Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 02/25] KVM: SVM: Passthrough the number of supported ASIDs Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 03/25] KVM: VMX: Generalize VPID allocation to be vendor-neutral Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 04/25] KVM: x86/mmu: Support specifying a minimum TLB tag Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 05/25] KVM: SVM: Add helpers to set/clear ASID flush in VMCB Yosry Ahmed
2026-06-16 0:41 ` Yosry Ahmed [this message]
2026-06-16 0:41 ` [RFC PATCH v2 07/25] KVM: SVM: Duplicate pre-run ASID check for SEV and non-SEV guests Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 08/25] KVM: SEV: Stop using per-vCPU ASID for SEV VMs Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 09/25] KVM: SVM: Use a static ASID per vCPU Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 10/25] KVM: nSVM: Add a placeholder ASID for L2 Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 11/25] KVM: x86: hyper-v: Rename kvm_hv_vcpu_purge_flush_tlb() Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 12/25] KVM: x86: hyper-v: Allow puring all TLB flush FIFOs Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 13/25] KVM: nSVM: Flush both L1 and L2 ASIDs on KVM_REQ_TLB_FLUSH Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 14/25] KVM: nSVM: Move svm_switch_vmcb() to nested.c Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 15/25] KVM: nSVM: Call nested_svm_transition_tlb_flush() on every VMCB switch Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 16/25] KVM: nSVM: Split nested_svm_transition_tlb_flush() into entry/exit fns Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 17/25] KVM: nSVM: Service local TLB flushes before nested transitions Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 18/25] KVM: nSVM: Handle nested TLB flush requests through TLB_CONTROL Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 19/25] KVM: nSVM: Flush the TLB if L1 changes L2's ASID in vmcb12 Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 20/25] KVM: nSVM: Do not reset TLB_CONTROL in vmcb02 on nested VM-Enter Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 21/25] KVM: x86/mmu: rename __kvm_mmu_invalidate_addr() Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 22/25] KVM: x86/mmu: Refactor kvm_mmu_invlpg() to allow skipping the gva flush Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 23/25] KVM: nSVM: Flush L2's ASID when emulating INVLPGA Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 24/25] KVM: nSVM: Use different ASIDs for L1 and L2 Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 25/25] DO NOT MERGE: Add nested_tlb_force_flush Yosry Ahmed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260616004155.1435766-7-yosry@kernel.org \
--to=yosry@kernel.org \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=thomas.lendacky@amd.com \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox