From: Yosry Ahmed <yosry@kernel.org>
To: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Jim Mattson <jmattson@google.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Yosry Ahmed <yosry@kernel.org>
Subject: [RFC PATCH v2 07/25] KVM: SVM: Duplicate pre-run ASID check for SEV and non-SEV guests
Date: Tue, 16 Jun 2026 00:41:36 +0000 [thread overview]
Message-ID: <20260616004155.1435766-8-yosry@kernel.org> (raw)
In-Reply-To: <20260616004155.1435766-1-yosry@kernel.org>
In preparation for dropping the check for non-SEV VMs, duplicate the
check between pre_sev_run() and pre_svm_run() (for the non-SEV code
path).
Opportunistically drop the unconditional dirtying of VMCB_ASID, as it's
only needed when the ASID is actually updated in the VMCB, not when
TLB_CONTROL is updated (as the code currently reads).
No functional change intended.
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
---
arch/x86/kvm/svm/sev.c | 6 +++++-
arch/x86/kvm/svm/svm.c | 9 +++++----
2 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index 026b070522dac..3c873c88894b3 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -3558,6 +3558,11 @@ int pre_sev_run(struct vcpu_svm *svm, int cpu)
/* Assign the asid allocated with this SEV guest */
svm->asid = asid;
+ if (unlikely(svm->asid != svm->vmcb->control.asid)) {
+ svm->vmcb->control.asid = asid;
+ vmcb_mark_dirty(svm->vmcb, VMCB_ASID);
+ }
+
/*
* Flush guest TLB:
*
@@ -3570,7 +3575,6 @@ int pre_sev_run(struct vcpu_svm *svm, int cpu)
sd->sev_vmcbs[asid] = svm->vmcb;
vmcb_set_flush_asid(svm->vmcb);
- vmcb_mark_dirty(svm->vmcb, VMCB_ASID);
return 0;
}
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 159abf841738f..5d4c45d788b54 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -3766,6 +3766,11 @@ static int pre_svm_run(struct kvm_vcpu *vcpu)
if (svm->current_vmcb->asid_generation != sd->asid_generation)
new_asid(svm, sd);
+ if (unlikely(svm->asid != svm->vmcb->control.asid)) {
+ svm->vmcb->control.asid = svm->asid;
+ vmcb_mark_dirty(svm->vmcb, VMCB_ASID);
+ }
+
return 0;
}
@@ -4502,10 +4507,6 @@ static __no_kcsan fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu, u64 run_flags)
sync_lapic_to_cr8(vcpu);
- if (unlikely(svm->asid != svm->vmcb->control.asid)) {
- svm->vmcb->control.asid = svm->asid;
- vmcb_mark_dirty(svm->vmcb, VMCB_ASID);
- }
svm->vmcb->save.cr2 = vcpu->arch.cr2;
if (guest_cpu_cap_has(vcpu, X86_FEATURE_ERAPS) &&
--
2.54.0.1136.gdb2ca164c4-goog
next prev parent reply other threads:[~2026-06-16 0:42 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-16 0:41 [RFC PATCH v2 00/25] Optimize nSVM TLB flushes Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 01/25] KVM: nSVM: Flush the TLB after forcefully leaving nested Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 02/25] KVM: SVM: Passthrough the number of supported ASIDs Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 03/25] KVM: VMX: Generalize VPID allocation to be vendor-neutral Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 04/25] KVM: x86/mmu: Support specifying a minimum TLB tag Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 05/25] KVM: SVM: Add helpers to set/clear ASID flush in VMCB Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 06/25] KVM: SVM: Fallback to flush everything if FLUSHBYASID is not available Yosry Ahmed
2026-06-16 0:41 ` Yosry Ahmed [this message]
2026-06-16 0:41 ` [RFC PATCH v2 08/25] KVM: SEV: Stop using per-vCPU ASID for SEV VMs Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 09/25] KVM: SVM: Use a static ASID per vCPU Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 10/25] KVM: nSVM: Add a placeholder ASID for L2 Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 11/25] KVM: x86: hyper-v: Rename kvm_hv_vcpu_purge_flush_tlb() Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 12/25] KVM: x86: hyper-v: Allow puring all TLB flush FIFOs Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 13/25] KVM: nSVM: Flush both L1 and L2 ASIDs on KVM_REQ_TLB_FLUSH Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 14/25] KVM: nSVM: Move svm_switch_vmcb() to nested.c Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 15/25] KVM: nSVM: Call nested_svm_transition_tlb_flush() on every VMCB switch Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 16/25] KVM: nSVM: Split nested_svm_transition_tlb_flush() into entry/exit fns Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 17/25] KVM: nSVM: Service local TLB flushes before nested transitions Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 18/25] KVM: nSVM: Handle nested TLB flush requests through TLB_CONTROL Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 19/25] KVM: nSVM: Flush the TLB if L1 changes L2's ASID in vmcb12 Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 20/25] KVM: nSVM: Do not reset TLB_CONTROL in vmcb02 on nested VM-Enter Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 21/25] KVM: x86/mmu: rename __kvm_mmu_invalidate_addr() Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 22/25] KVM: x86/mmu: Refactor kvm_mmu_invlpg() to allow skipping the gva flush Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 23/25] KVM: nSVM: Flush L2's ASID when emulating INVLPGA Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 24/25] KVM: nSVM: Use different ASIDs for L1 and L2 Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 25/25] DO NOT MERGE: Add nested_tlb_force_flush Yosry Ahmed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260616004155.1435766-8-yosry@kernel.org \
--to=yosry@kernel.org \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=thomas.lendacky@amd.com \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox