[PATCHv2 7/8] ata: sata_dwc_460ex: fix PHY lifecycle ordering on device removal

[Rosen Penev <rosenp@gmail.com>]

sata_dwc_remove() calls phy_exit() while phy_power_off() is still
pending in sata_dwc_port_stop(), which runs later during device
teardown.  This violates the expected PHY sequencing of power_off
before exit.

Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/ata/sata_dwc_460ex.c | 32 +++++++++++++++++++-------------
 1 file changed, 19 insertions(+), 13 deletions(-)

diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index f26220cac130..e8e2790be1d6 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -864,10 +864,14 @@ static int sata_dwc_port_start(struct ata_port *ap)
 	if (err)
 		goto CLEANUP_ALLOC;
 
-	err = phy_power_on(hsdev->phy);
+	err = phy_init(hsdev->phy);
 	if (err)
 		goto CLEANUP_ALLOC;
 
+	err = phy_power_on(hsdev->phy);
+	if (err)
+		goto CLEANUP_PHY;
+
 	for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
 		hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;
 
@@ -893,6 +897,8 @@ static int sata_dwc_port_start(struct ata_port *ap)
 	dev_dbg(ap->dev, "%s: done\n", __func__);
 	return 0;
 
+CLEANUP_PHY:
+	phy_exit(hsdev->phy);
 CLEANUP_ALLOC:
 	kfree(hsdevp);
 CLEANUP:
@@ -910,6 +916,7 @@ static void sata_dwc_port_stop(struct ata_port *ap)
 	dmaengine_terminate_sync(hsdevp->chan);
 	dma_release_channel(hsdevp->chan);
 	phy_power_off(hsdev->phy);
+	phy_exit(hsdev->phy);
 
 	kfree(hsdevp);
 	ap->private_data = NULL;
@@ -1176,6 +1183,10 @@ static int sata_dwc_probe(struct platform_device *ofdev)
 	if (irq < 0)
 		return irq;
 
+	hsdev->phy = devm_phy_optional_get(dev, "sata-phy");
+	if (IS_ERR(hsdev->phy))
+		return PTR_ERR(hsdev->phy);
+
 #ifdef CONFIG_SATA_DWC_OLD_DMA
 	if (!device_property_present(dev, "dmas")) {
 		err = sata_dwc_dma_init_old(ofdev, hsdev);
@@ -1184,29 +1195,26 @@ static int sata_dwc_probe(struct platform_device *ofdev)
 	}
 #endif
 
-	hsdev->phy = devm_phy_optional_get(dev, "sata-phy");
-	if (IS_ERR(hsdev->phy))
-		return PTR_ERR(hsdev->phy);
-
-	err = phy_init(hsdev->phy);
-	if (err)
-		goto error_out;
-
 	/*
 	 * Now, register with libATA core, this will also initiate the
 	 * device discovery process, invoking our port_start() handler &
 	 * error_handler() to execute a dummy Softreset EH session
 	 */
 	err = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
-	if (err)
+	if (err) {
 		dev_err(dev, "failed to activate host");
+		goto error_out;
+	}
 
 	/* Enable SATA Interrupts */
 	sata_dwc_enable_interrupts(hsdev);
 	return 0;
 
 error_out:
-	phy_exit(hsdev->phy);
+#ifdef CONFIG_SATA_DWC_OLD_DMA
+	if (!device_property_present(dev, "dmas"))
+		sata_dwc_dma_exit_old(hsdev);
+#endif
 	return err;
 }
 
@@ -1220,8 +1228,6 @@ static void sata_dwc_remove(struct platform_device *ofdev)
 
 	ata_host_detach(host);
 
-	phy_exit(hsdev->phy);
-
 #ifdef CONFIG_SATA_DWC_OLD_DMA
 	/* Free SATA DMA resources */
 	sata_dwc_dma_exit_old(hsdev);
-- 
2.55.0