From: Rosen Penev <rosenp@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Damien Le Moal <dlemoal@kernel.org>,
Niklas Cassel <cassel@kernel.org>,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCHv2 8/8] ata: sata_dwc_460ex: use devm for old DMA resource lifetime management
Date: Wed, 1 Jul 2026 17:03:50 -0700 [thread overview]
Message-ID: <20260702000350.68331-9-rosenp@gmail.com> (raw)
In-Reply-To: <20260702000350.68331-1-rosenp@gmail.com>
Convert sata_dwc_dma_exit_old() to a devm action callback and register
it via devm_add_action_or_reset() after dw_dma_probe() succeeds. This
lets the devm framework handle DMA controller teardown automatically on
probe failure and driver removal.
As a result the probe function can use plain return-on-error for all
failure paths - the dma_initialized flag, the goto labels, and the
explicit sata_dwc_dma_exit_old() call in sata_dwc_remove() are all
eliminated.
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
drivers/ata/sata_dwc_460ex.c | 34 +++++++++++++---------------------
1 file changed, 13 insertions(+), 21 deletions(-)
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index e8e2790be1d6..352cd7f02163 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -222,10 +222,18 @@ static int sata_dwc_dma_get_channel_old(struct sata_dwc_device_port *hsdevp)
return 0;
}
+static void sata_dwc_dma_exit_old(void *data)
+{
+ struct sata_dwc_device *hsdev = data;
+
+ dw_dma_remove(hsdev->dma);
+}
+
static int sata_dwc_dma_init_old(struct platform_device *pdev,
struct sata_dwc_device *hsdev)
{
struct device *dev = &pdev->dev;
+ int err;
hsdev->dma = devm_kzalloc(dev, sizeof(*hsdev->dma), GFP_KERNEL);
if (!hsdev->dma)
@@ -245,15 +253,11 @@ static int sata_dwc_dma_init_old(struct platform_device *pdev,
return PTR_ERR(hsdev->dma->regs);
/* Initialize AHB DMAC */
- return dw_dma_probe(hsdev->dma);
-}
-
-static void sata_dwc_dma_exit_old(struct sata_dwc_device *hsdev)
-{
- if (!hsdev->dma)
- return;
+ err = dw_dma_probe(hsdev->dma);
+ if (err)
+ return err;
- dw_dma_remove(hsdev->dma);
+ return devm_add_action_or_reset(dev, sata_dwc_dma_exit_old, hsdev);
}
#endif
@@ -1203,19 +1207,12 @@ static int sata_dwc_probe(struct platform_device *ofdev)
err = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
if (err) {
dev_err(dev, "failed to activate host");
- goto error_out;
+ return err;
}
/* Enable SATA Interrupts */
sata_dwc_enable_interrupts(hsdev);
return 0;
-
-error_out:
-#ifdef CONFIG_SATA_DWC_OLD_DMA
- if (!device_property_present(dev, "dmas"))
- sata_dwc_dma_exit_old(hsdev);
-#endif
- return err;
}
static void sata_dwc_remove(struct platform_device *ofdev)
@@ -1228,11 +1225,6 @@ static void sata_dwc_remove(struct platform_device *ofdev)
ata_host_detach(host);
-#ifdef CONFIG_SATA_DWC_OLD_DMA
- /* Free SATA DMA resources */
- sata_dwc_dma_exit_old(hsdev);
-#endif
-
dev_dbg(dev, "done\n");
}
--
2.55.0
next prev parent reply other threads:[~2026-07-02 0:04 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-02 0:03 [PATCHv2 0/8] ata: sata_dwc_460ex: cleanups and interrupt ordering fix Rosen Penev
2026-07-02 0:03 ` [PATCHv2 1/8] ata: sata_dwc_460ex: use device_property_present() Rosen Penev
2026-07-02 0:03 ` [PATCHv2 2/8] ata: sata_dwc_460ex: use platform_get_irq() Rosen Penev
2026-07-02 0:03 ` [PATCHv2 3/8] ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered Rosen Penev
2026-07-02 0:03 ` [PATCHv2 4/8] ata: sata_dwc_460ex: drop redundant struct copy of port_info Rosen Penev
2026-07-02 0:03 ` [PATCHv2 5/8] ata: sata_dwc_460ex: fix data race on hsdev->sactive_issued in interrupt handler Rosen Penev
2026-07-02 0:03 ` [PATCHv2 6/8] ata: sata_dwc_460ex: disable SATA interrupts on device removal Rosen Penev
2026-07-02 0:03 ` [PATCHv2 7/8] ata: sata_dwc_460ex: fix PHY lifecycle ordering " Rosen Penev
2026-07-02 0:03 ` Rosen Penev [this message]
2026-07-02 2:02 ` [PATCHv2 0/8] ata: sata_dwc_460ex: cleanups and interrupt ordering fix Damien Le Moal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260702000350.68331-9-rosenp@gmail.com \
--to=rosenp@gmail.com \
--cc=cassel@kernel.org \
--cc=dlemoal@kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox