* [PATCHv2] gpio: mvebu: convert to noirq suspend/resume to prevent interrupt storm on resume
@ 2026-07-10 7:07 Rosen Penev
0 siblings, 0 replies; only message in thread
From: Rosen Penev @ 2026-07-10 7:07 UTC (permalink / raw)
To: linux-gpio; +Cc: Linus Walleij, Bartosz Golaszewski, open list
The driver uses the legacy .suspend/.resume callbacks, but sets
IRQCHIP_MASK_ON_SUSPEND on the irq_chip. During resume, the PM core
runs dpm_resume_noirq() first, which calls irq_pm_resume() to unmask
interrupts, and only then runs dpm_resume() which invokes the driver's
.resume callback to restore GPIO registers (GPIO_IN_POL, GPIO_IO_CONF,
mask registers).
This ordering means interrupts are unmasked while the hardware is still
in its reset state, potentially with incorrect polarities, causing
spurious level-triggered interrupts before local IRQs are re-enabled.
Convert the driver from legacy .suspend/.resume callbacks to noirq
callbacks via dev_pm_ops. The noirq phase runs before resume_device_irqs()
on resume and after suspend_device_irqs() on suspend, ensuring GPIO
registers are restored before interrupts are unmasked.
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
v2: add __maybe_unused to fix compilation
drivers/gpio/gpio-mvebu.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 7094ab34020c..bd31acf779e6 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -979,9 +979,9 @@ static const struct of_device_id mvebu_gpio_of_match[] = {
},
};
-static int mvebu_gpio_suspend(struct platform_device *pdev, pm_message_t state)
+static __maybe_unused int mvebu_gpio_suspend(struct device *dev)
{
- struct mvebu_gpio_chip *mvchip = platform_get_drvdata(pdev);
+ struct mvebu_gpio_chip *mvchip = dev_get_drvdata(dev);
int i;
regmap_read(mvchip->regs, GPIO_OUT_OFF + mvchip->offset,
@@ -1031,9 +1031,9 @@ static int mvebu_gpio_suspend(struct platform_device *pdev, pm_message_t state)
return 0;
}
-static int mvebu_gpio_resume(struct platform_device *pdev)
+static __maybe_unused int mvebu_gpio_resume(struct device *dev)
{
- struct mvebu_gpio_chip *mvchip = platform_get_drvdata(pdev);
+ struct mvebu_gpio_chip *mvchip = dev_get_drvdata(dev);
int i;
regmap_write(mvchip->regs, GPIO_OUT_OFF + mvchip->offset,
@@ -1339,13 +1339,16 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
return 0;
}
+static const struct dev_pm_ops mvebu_gpio_pm_ops = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mvebu_gpio_suspend, mvebu_gpio_resume)
+};
+
static struct platform_driver mvebu_gpio_driver = {
.driver = {
.name = "mvebu-gpio",
.of_match_table = mvebu_gpio_of_match,
+ .pm = pm_sleep_ptr(&mvebu_gpio_pm_ops),
},
.probe = mvebu_gpio_probe,
- .suspend = mvebu_gpio_suspend,
- .resume = mvebu_gpio_resume,
};
builtin_platform_driver(mvebu_gpio_driver);
--
2.55.0
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2026-07-10 7:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-07-10 7:07 [PATCHv2] gpio: mvebu: convert to noirq suspend/resume to prevent interrupt storm on resume Rosen Penev
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox