[PATCH 0/3] iio: light: ltr501: Add ltr329 support

[PATCH 0/3] iio: light: ltr501: Add ltr329 support

[Esben Haabendal]

The LiteON LTR-329ALS-01 chip is similar to the LTR-303ALS-01, except for
interrupt support and related registers, which LTR-329ALS-01 does not have.

Signed-off-by: Esben Haabendal <esben@geanix.com>
---
Esben Haabendal (3):
      dt-bindings: iio: light: ltr501: Add missing ltr303 compatible
      dt-bindings: iio: light: ltr501: Add ltr329 compatible
      iio: light: ltr501: Add ltr329 driver support

 .../bindings/iio/light/liteon,ltr501.yaml          |  2 ++
 drivers/iio/light/ltr501.c                         | 31 ++++++++++++++++++++++
 2 files changed, 33 insertions(+)
---
base-commit: 8cdeaa50eae8dad34885515f62559ee83e7e8dda
change-id: 20260711-liteon-ltr329-a3eb12414866

Best regards,
--  
Esben Haabendal <esben@geanix.com>

[PATCH 1/3] dt-bindings: iio: light: ltr501: Add missing ltr303 compatible

[Esben Haabendal]

When support for ltr303 was back in 2021, the bindings documentation was
not updated accordingly.

Fixes: 7d71d289e1ba ("iio: light: ltr501: Added ltr303 driver support")
Signed-off-by: Esben Haabendal <esben@geanix.com>
---
 Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
index c8074f180a79..ab9bb68dd736 100644
--- a/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
+++ b/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
@@ -18,6 +18,7 @@ properties:
       - liteon,ltr501
       - liteon,ltr559
       - liteon,ltr301
+      - liteon,ltr303
 
   reg:
     maxItems: 1

-- 
2.55.0

[PATCH 2/3] dt-bindings: iio: light: ltr501: Add ltr329 compatible

[Esben Haabendal]

LTR-329ALS-01 is an ambient light sensor similar to LTR-303ALS-01, but
without interrupt support.

Signed-off-by: Esben Haabendal <esben@geanix.com>
---
 Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
index ab9bb68dd736..76e81eba7ea4 100644
--- a/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
+++ b/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
@@ -19,6 +19,7 @@ properties:
       - liteon,ltr559
       - liteon,ltr301
       - liteon,ltr303
+      - liteon,ltr329
 
   reg:
     maxItems: 1

-- 
2.55.0

[PATCH 3/3] iio: light: ltr501: Add ltr329 driver support

[Esben Haabendal]

This adds support for the LTR-329ALS-01 chip, which is similar to
LTR-303ALS-01, except for interrupt, which LTR-329ALS-01 chip does not
have.

Signed-off-by: Esben Haabendal <esben@geanix.com>
---
 drivers/iio/light/ltr501.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c
index 7d045be78c6d..815b67a10837 100644
--- a/drivers/iio/light/ltr501.c
+++ b/drivers/iio/light/ltr501.c
@@ -94,6 +94,7 @@ enum {
 	ltr559,
 	ltr301,
 	ltr303,
+	ltr329,
 };
 
 struct ltr501_gain {
@@ -178,6 +179,11 @@ static const struct ltr501_samp_table ltr501_ps_samp_table[] = {
 			{500000, 2000000}
 };
 
+static bool ltr501_has_irq_support(const struct ltr501_chip_info *chip_info)
+{
+	return chip_info->info != chip_info->info_no_irq;
+}
+
 static int ltr501_match_samp_freq(const struct ltr501_samp_table *tab,
 					   int len, int val, int val2)
 {
@@ -428,6 +434,9 @@ static int ltr501_read_intr_prst(const struct ltr501_data *data,
 {
 	int ret, samp_period, prst;
 
+	if (!ltr501_has_irq_support(data->chip_info))
+		return 0;
+
 	switch (type) {
 	case IIO_INTENSITY:
 		ret = regmap_field_read(data->reg_als_prst, &prst);
@@ -466,6 +475,9 @@ static int ltr501_write_intr_prst(struct ltr501_data *data,
 	int ret, samp_period, new_val;
 	unsigned long period;
 
+	if (!ltr501_has_irq_support(data->chip_info))
+		return 0;
+
 	if (val < 0 || val2 < 0)
 		return -EINVAL;
 
@@ -1257,6 +1269,18 @@ static const struct ltr501_chip_info ltr501_chip_info_tbl[] = {
 		.channels = ltr301_channels,
 		.no_channels = ARRAY_SIZE(ltr301_channels),
 	},
+	[ltr329] = {
+		.partid = 0x0A,
+		.als_gain = ltr559_als_gain_tbl,
+		.als_gain_tbl_size = ARRAY_SIZE(ltr559_als_gain_tbl),
+		.als_mode_active = BIT(0),
+		.als_gain_mask = BIT(2) | BIT(3) | BIT(4),
+		.als_gain_shift = 2,
+		.info = &ltr301_info_no_irq,
+		.info_no_irq = &ltr301_info_no_irq,
+		.channels = ltr301_channels,
+		.no_channels = ARRAY_SIZE(ltr301_channels),
+	},
 };
 
 static int ltr501_write_contr(struct ltr501_data *data, u8 als_val, u8 ps_val)
@@ -1531,6 +1555,11 @@ static int ltr501_probe(struct i2c_client *client)
 		return ret;
 
 	if (client->irq > 0) {
+		if (!ltr501_has_irq_support(data->chip_info)) {
+			dev_err(&client->dev, "chip does not support irq\n");
+			return -EINVAL;
+		}
+
 		ret = devm_request_threaded_irq(&client->dev, client->irq,
 						NULL, ltr501_interrupt_handler,
 						IRQF_TRIGGER_FALLING |
@@ -1604,6 +1633,7 @@ static const struct i2c_device_id ltr501_id[] = {
 	{ .name = "ltr559", .driver_data = ltr559 },
 	{ .name = "ltr301", .driver_data = ltr301 },
 	{ .name = "ltr303", .driver_data = ltr303 },
+	{ .name = "ltr329", .driver_data = ltr329 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ltr501_id);
@@ -1613,6 +1643,7 @@ static const struct of_device_id ltr501_of_match[] = {
 	{ .compatible = "liteon,ltr559", },
 	{ .compatible = "liteon,ltr301", },
 	{ .compatible = "liteon,ltr303", },
+	{ .compatible = "liteon,ltr329", },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ltr501_of_match);

-- 
2.55.0

Re: [PATCH 3/3] iio: light: ltr501: Add ltr329 driver support

[Joshua Crofts]

On Wed, 15 Jul 2026 10:23:50 +0200
Esben Haabendal <esben@geanix.com> wrote:
> @@ -1257,6 +1269,18 @@ static const struct ltr501_chip_info ltr501_chip_info_tbl[] = {
>  		.channels = ltr301_channels,
>  		.no_channels = ARRAY_SIZE(ltr301_channels),
>  	},
> +	[ltr329] = {
> +		.partid = 0x0A,
> +		.als_gain = ltr559_als_gain_tbl,
> +		.als_gain_tbl_size = ARRAY_SIZE(ltr559_als_gain_tbl),

While you're at it, add `#include <linux/array_size.h>`

> +		.als_mode_active = BIT(0),
> +		.als_gain_mask = BIT(2) | BIT(3) | BIT(4),
> +		.als_gain_shift = 2,
> +		.info = &ltr301_info_no_irq,
> +		.info_no_irq = &ltr301_info_no_irq,
> +		.channels = ltr301_channels,
> +		.no_channels = ARRAY_SIZE(ltr301_channels),
> +	},
>  };
>  
>  static int ltr501_write_contr(struct ltr501_data *data, u8 als_val, u8 ps_val)
> @@ -1531,6 +1555,11 @@ static int ltr501_probe(struct i2c_client *client)
>  		return ret;
>  
>  	if (client->irq > 0) {
> +		if (!ltr501_has_irq_support(data->chip_info)) {
> +			dev_err(&client->dev, "chip does not support irq\n");
> +			return -EINVAL;

Shouldn't this jump to the powerdown_on_error label instead of returning?

-- 
Kind regards

CJD