[PATCH 0/2] riscv: dts: spacemit: add eeprom for K3 CoM260

[PATCH 0/2] riscv: dts: spacemit: add eeprom for K3 CoM260

[Jennifer Berringer]

SpacemiT K3 CoM260 Dev Kit has two eeproms: one on the compute
module and one on the carrier board. Both use a Giantec
GT24C02B-2TFLI-TR.

Jennifer Berringer (2):
  riscv: dts: spacemit: k3-com260: add eeprom on i2c2
  riscv: dts: spacemit: k3-com260-ifx: add eeprom on i2c1

 .../riscv/boot/dts/spacemit/k3-com260-ifx.dts | 15 +++++++++
 arch/riscv/boot/dts/spacemit/k3-com260.dtsi   | 32 +++++++++++++++++++
 arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi  | 12 +++++++
 3 files changed, 59 insertions(+)


base-commit: 199380e4d8cd22e539a08d4949e9582b09390bd5
-- 
2.55.0

[PATCH 1/2] riscv: dts: spacemit: k3-com260: add eeprom on i2c2

[Jennifer Berringer]

Enable i2c2 on the K3 CoM260 compute module and use it for a 24c02
eeprom. This eeprom stores the product name, a MAC address, and a serial
number.

Signed-off-by: Jennifer Berringer <jberring@redhat.com>
---
 arch/riscv/boot/dts/spacemit/k3-com260.dtsi | 32 +++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k3-com260.dtsi b/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
index a38d7b738258d..a6f160dca19de 100644
--- a/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
@@ -26,6 +26,38 @@ reg_5v_sys: regulator-5v-sys {
 	};
 };
 
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_1_cfg>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		pagesize = <8>;
+		reg = <0x50>;
+		read-only;
+		size = <256>;
+		status = "okay";
+
+		nvmem-layout {
+			compatible = "onie,tlv-layout";
+
+			mac-address {
+				#nvmem-cell-cells = <1>;
+			};
+
+			num-macs {
+			};
+
+			product-name {
+			};
+
+			serial-number {
+			};
+		};
+	};
+};
+
 &i2c8 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c8_cfg>;
-- 
2.55.0

[PATCH 2/2] riscv: dts: spacemit: k3-com260-ifx: add eeprom on i2c1

[Jennifer Berringer]

Enable i2c1 for k3-com260-ifx and use it for a 24c02 eeprom. This
eeprom, unlike the one connected to i2c2, is part of the carrier board.
Some boards do not have any data programmed on this eeprom from factory.

Signed-off-by: Jennifer Berringer <jberring@redhat.com>
---
 arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts | 15 +++++++++++++++
 arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi   | 12 ++++++++++++
 2 files changed, 27 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts b/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts
index e7f76cd24b903..a5c08a7a781a9 100644
--- a/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts
@@ -20,6 +20,21 @@ chosen {
 	};
 };
 
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_1_cfg>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		pagesize = <8>;
+		reg = <0x50>;
+		read-only;
+		size = <256>;
+		status = "okay";
+	};
+};
+
 &sdhci0 {
 	pinctrl-names = "default","uhs";
 	pinctrl-0 = <&mmc1_cfg>;
diff --git a/arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi b/arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi
index 5b9045e014345..6482d24be1394 100644
--- a/arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi
@@ -78,6 +78,18 @@ gmac1-phy-0-pins {
 		};
 	};
 
+	/omit-if-no-ref/
+	i2c1_1_cfg: i2c1-1-cfg {
+		i2c1-1-pins {
+			pinmux = <K3_PADCONF(54, 5)>,	/* i2c1 scl */
+				 <K3_PADCONF(55, 5)>;	/* i2c1 sda */
+
+			bias-pull-up = <1>;
+			drive-strength = <25>;
+			power-source = <1800>;
+		};
+	};
+
 	/omit-if-no-ref/
 	i2c2_1_cfg: i2c2-1-cfg {
 		i2c2-1-pins {
-- 
2.55.0

Re: [PATCH 0/2] riscv: dts: spacemit: add eeprom for K3 CoM260

[Yixun Lan]

Hi Jennifer,

On 16:28 Wed 22 Jul     , Jennifer Berringer wrote:
> SpacemiT K3 CoM260 Dev Kit has two eeproms: one on the compute
> module and one on the carrier board. Both use a Giantec
> GT24C02B-2TFLI-TR.
> 

Patch looks good, so

Reviewed-by: Yixun Lan <dlan@kernel.org>

> Jennifer Berringer (2):
>   riscv: dts: spacemit: k3-com260: add eeprom on i2c2
>   riscv: dts: spacemit: k3-com260-ifx: add eeprom on i2c1
> 
>  .../riscv/boot/dts/spacemit/k3-com260-ifx.dts | 15 +++++++++
>  arch/riscv/boot/dts/spacemit/k3-com260.dtsi   | 32 +++++++++++++++++++
>  arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi  | 12 +++++++
>  3 files changed, 59 insertions(+)
> 
> 
> base-commit: 199380e4d8cd22e539a08d4949e9582b09390bd5
> -- 
> 2.55.0
> 

-- 
Yixun Lan (dlan)