The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Yosry Ahmed <yosry@kernel.org>
To: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
	Jim Mattson <jmattson@google.com>,
	Maxim Levitsky <mlevitsk@redhat.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>,
	Tom Lendacky <thomas.lendacky@amd.com>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Yosry Ahmed <yosry@kernel.org>
Subject: [PATCH v1 21/28] KVM: nSVM: Flush the TLB if L1 changes L2's ASID in vmcb12
Date: Tue, 28 Jul 2026 00:35:50 +0000	[thread overview]
Message-ID: <20260728003557.1136583-22-yosry@kernel.org> (raw)
In-Reply-To: <20260728003557.1136583-1-yosry@kernel.org>

KVM uses a single ASID for L2 guests per-vCPU. Hence, when L1 changes
L2's ASID in vmcb12 (e.g. due to switching a different L2
vCPU or simply to avoid flushing an existing ASID), KVM needs to flush
the L2 ASID to correctly emulate different ASIDs as different TLB
domains.

Additionally, the nested NPT needs to be resync'd, as the MMU context
is not tagged by ASID, and KVM cannot reuse nested NPT entries across
different L2 ASIDs.

Essentially, L1 switching L2's ASID is treated exactly the same as L1
flushing L2's ASID, which is consistent with the APM:

  Software may effectively flush the guest's TLB entries by allocating a
  new ASID for the guest and not reusing the old ASID until the entire
  TLB has been flushed at least once.

This is similar to nVMX's handling of last_vpid, except that when L1
changes VPID12, KVM does *not* need to resync the nested EPT, because
VMX VPIDs , unlike SVM ASIDs, do not tag guest-physical translations
(i.e. nGPA to GPA translations).

Drop the commentary about vmcb12's ASID being copied around only for the
consistency checks, as they no longer apply, and opportunistically fix
whitespace alignment.

This is currently functionally a noop, as a full flush and sync is
triggered on every nested transition, but is a step toward eliminating
that.

Signed-off-by: Yosry Ahmed <yosry@kernel.org>
---
 arch/x86/kvm/svm/nested.c | 22 ++++++++++++++++------
 arch/x86/kvm/svm/svm.h    |  2 ++
 2 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
index 073368ddd207a..f50e21fd363fc 100644
--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -553,10 +553,8 @@ void __nested_copy_vmcb_control_to_cache(struct kvm_vcpu *vcpu,
 	to->misc_ctl2		= from->misc_ctl2;
 	to->pause_filter_count  = from->pause_filter_count;
 	to->pause_filter_thresh = from->pause_filter_thresh;
-
-	/* Copy asid here because nested_vmcb_check_controls() will check it */
-	to->asid           = from->asid;
-	to->clean = from->clean;
+	to->asid		= from->asid;
+	to->clean		= from->clean;
 
 #ifdef CONFIG_KVM_HYPERV
 	/* Hyper-V extensions (Enlightened VMCB) */
@@ -688,22 +686,34 @@ static void nested_save_pending_event_to_vmcb12(struct vcpu_svm *svm,
 static void nested_svm_entry_tlb_flush(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
+	bool new_asid = false;
 
 	/* Handle pending Hyper-V TLB flush requests */
 	kvm_hv_nested_transtion_tlb_flush(vcpu, npt_enabled);
 
+	if (svm->nested.ctl.asid != svm->nested.last_asid) {
+		svm->nested.last_asid = svm->nested.ctl.asid;
+		new_asid = true;
+	}
+
 	/*
 	 * If L1 requested a TLB flush for L2, flush L2's TLB on nested entry
 	 * and sync the nested NPT MMU, as TLB_CONTROL also flushes NPT
 	 * guest-physical mappings.
 	 *
+	 * Handle L1 changing L2's ASID12 similarly, as KVM only uses one ASID
+	 * for L2 in hardware (per vCPU), so it must start fresh when L1 changes
+	 * ASID12 to emulate different ASIDs correctly.  Additionally, the MMU
+	 * context is not tagged by the ASID, so the shadow NPTs cannot be
+	 * reused across different L2 ASIDs.
+	 *
 	 * If L1 requested a full TLB flush for all ASIDs (including its own),
 	 * L1's own ASID is also flushed on nested VM-Exit, before running L1.
 	 *
 	 * TLB_CONTROL_FLUSH_ASID and TLB_CONTROL_FLUSH_ASID_LOCAL are handled
 	 * equally for simplicity.
 	 */
-	if (svm->nested.ctl.tlb_ctl != TLB_CONTROL_DO_NOTHING) {
+	if (new_asid || (svm->nested.ctl.tlb_ctl != TLB_CONTROL_DO_NOTHING)) {
 		if (nested_npt_enabled(svm))
 			kvm_make_request(KVM_REQ_MMU_SYNC, vcpu);
 		kvm_make_request(KVM_REQ_TLB_FLUSH_GUEST, vcpu);
@@ -1885,7 +1895,7 @@ void nested_svm_update_tsc_ratio_msr(struct kvm_vcpu *vcpu)
 	svm_write_tsc_multiplier(vcpu);
 }
 
-/* Inverse operation of nested_copy_vmcb_control_to_cache(). asid is copied too. */
+/* Inverse operation of nested_copy_vmcb_control_to_cache() */
 static void nested_copy_vmcb_cache_to_control(struct vmcb_control_area *dst,
 					      struct vmcb_ctrl_area_cached *from)
 {
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index 2e0c9c469ec63..80a6b08fc4003 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -242,6 +242,8 @@ struct svm_nested_state {
 	 * on its side.
 	 */
 	bool force_msr_bitmap_recalc;
+
+	u32 last_asid;
 };
 
 struct vcpu_sev_es_state {
-- 
2.55.0.229.g6434b31f56-goog


  parent reply	other threads:[~2026-07-28  0:36 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-28  0:35 [PATCH v1 00/28] KVM: nSVM: Optimize nSVM TLB flushes Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 01/28] KVM: nSVM: Flush the TLB after forcefully leaving nested Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 02/28] KVM: SVM: Document number of ASIDs CPUID setting Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 03/28] KVM: VMX: Generalize VPID allocation to be vendor-neutral Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 04/28] KVM: x86/mmu: Support specifying reserved TLB tags Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 05/28] KVM: SVM: Add helpers to set/clear ASID flush in VMCB Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 06/28] KVM: SVM: Fallback to flush everything if FLUSHBYASID is not available Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 07/28] KVM: SVM: Duplicate pre-run ASID check for SEV and non-SEV guests Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 08/28] KVM: SEV: Do ASID initialization at VMCB initialization Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 09/28] KVM: SEV: Expose sev_get_asid() outside of sev.c Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 10/28] KVM: SVM: Use a static ASID per vCPU Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 11/28] KVM: SVM: Only flush the fallback ASID when used by a different vCPU Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 12/28] KVM: nSVM: Add a placeholder ASID for L2 Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 13/28] KVM: x86: hyper-v: Rename kvm_hv_vcpu_purge_flush_tlb() Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 14/28] KVM: x86: hyper-v: Allow puring all TLB flush FIFOs Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 15/28] KVM: nSVM: Drop svm->nested.initialized Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 16/28] KVM: nSVM: Flush both L1 and L2 ASIDs on KVM_REQ_TLB_FLUSH Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 17/28] KVM: nSVM: Always switch VMCB before leaving guest mode Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 18/28] KVM: nSVM: Split nested_svm_transition_tlb_flush() into entry/exit fns Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 19/28] KVM: nSVM: Service local TLB flushes before nested transitions Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 20/28] KVM: nSVM: Handle nested TLB flush requests through TLB_CONTROL Yosry Ahmed
2026-07-28  0:35 ` Yosry Ahmed [this message]
2026-07-28  0:35 ` [PATCH v1 22/28] KVM: nSVM: Do not reset TLB_CONTROL in vmcb02 on nested VM-Enter Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 23/28] KVM: x86/mmu: Rename __kvm_mmu_invalidate_addr() to kvm_mmu_sync_addr() Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 24/28] KVM: x86/mmu: Refactor kvm_mmu_invlpg() to allow skipping the GVA flush Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 25/28] KVM: nSVM: Flush L2's ASID when emulating INVLPGA Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 26/28] KVM: nSVM: Flush the ASID on nested transitions if shared by L1 and L2 Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 27/28] KVM: nSVM: Use different ASIDs for " Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 28/28] KVM: selftests: Add a test for nested TLB flushes Yosry Ahmed
2026-07-28  1:05 ` [PATCH v1 00/28] KVM: nSVM: Optimize nSVM " Yosry Ahmed
2026-07-28  1:18   ` Sean Christopherson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260728003557.1136583-22-yosry@kernel.org \
    --to=yosry@kernel.org \
    --cc=jmattson@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=thomas.lendacky@amd.com \
    --cc=vkuznets@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox