The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Yosry Ahmed <yosry@kernel.org>
To: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
	Jim Mattson <jmattson@google.com>,
	Maxim Levitsky <mlevitsk@redhat.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>,
	Tom Lendacky <thomas.lendacky@amd.com>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Yosry Ahmed <yosry@kernel.org>
Subject: [PATCH v1 06/28] KVM: SVM: Fallback to flush everything if FLUSHBYASID is not available
Date: Tue, 28 Jul 2026 00:35:35 +0000	[thread overview]
Message-ID: <20260728003557.1136583-7-yosry@kernel.org> (raw)
In-Reply-To: <20260728003557.1136583-1-yosry@kernel.org>

Currently, if FLUSHBYASID is not available when performing a TLB flush,
the fallback is decrementing the ASID generation to trigger allocating a
new ASID. In preparation for using a static ASID per vCPU (like VMX),
just fallback to flushing everything if FLUSHBYASID is not available.
This is probably worse from a performance perspective, but FLUSHBYASID
has been around for ~15 years and it's not worth carrying the
complexity.

Move the fallback logic into vmcb_set_flush_asid(), as more callers will
be added and will need the fallback as well. The only other current
caller is from SEV code, and no CPUs support SEV but not FLUSHBYASID (at
least according to AI).

Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
---
 arch/x86/kvm/svm/svm.c | 5 +----
 arch/x86/kvm/svm/svm.h | 5 ++++-
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index de90320a2e669..aff1aae5a5a32 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -4198,10 +4198,7 @@ static void svm_flush_tlb_asid(struct kvm_vcpu *vcpu)
 	 * unconditionally does a TLB flush on both nested VM-Enter and nested
 	 * VM-Exit (via kvm_mmu_reset_context()).
 	 */
-	if (static_cpu_has(X86_FEATURE_FLUSHBYASID))
-		vmcb_set_flush_asid(svm->vmcb);
-	else
-		svm->current_vmcb->asid_generation--;
+	vmcb_set_flush_asid(svm->vmcb);
 }
 
 static void svm_flush_tlb_current(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index e3cce839573d9..2f18dff023bc5 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -479,7 +479,10 @@ static inline void vmcb_set_gpat(struct vmcb *vmcb, u64 data)
 
 static inline void vmcb_set_flush_asid(struct vmcb *vmcb)
 {
-	vmcb->control.tlb_ctl = TLB_CONTROL_FLUSH_ASID;
+	if (static_cpu_has(X86_FEATURE_FLUSHBYASID))
+		vmcb->control.tlb_ctl = TLB_CONTROL_FLUSH_ASID;
+	else
+		vmcb->control.tlb_ctl = TLB_CONTROL_FLUSH_ALL_ASID;
 }
 
 static inline void vmcb_clr_flush_asid(struct vmcb *vmcb)
-- 
2.55.0.229.g6434b31f56-goog


  parent reply	other threads:[~2026-07-28  0:36 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-28  0:35 [PATCH v1 00/28] KVM: nSVM: Optimize nSVM TLB flushes Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 01/28] KVM: nSVM: Flush the TLB after forcefully leaving nested Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 02/28] KVM: SVM: Document number of ASIDs CPUID setting Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 03/28] KVM: VMX: Generalize VPID allocation to be vendor-neutral Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 04/28] KVM: x86/mmu: Support specifying reserved TLB tags Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 05/28] KVM: SVM: Add helpers to set/clear ASID flush in VMCB Yosry Ahmed
2026-07-28  0:35 ` Yosry Ahmed [this message]
2026-07-28  0:35 ` [PATCH v1 07/28] KVM: SVM: Duplicate pre-run ASID check for SEV and non-SEV guests Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 08/28] KVM: SEV: Do ASID initialization at VMCB initialization Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 09/28] KVM: SEV: Expose sev_get_asid() outside of sev.c Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 10/28] KVM: SVM: Use a static ASID per vCPU Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 11/28] KVM: SVM: Only flush the fallback ASID when used by a different vCPU Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 12/28] KVM: nSVM: Add a placeholder ASID for L2 Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 13/28] KVM: x86: hyper-v: Rename kvm_hv_vcpu_purge_flush_tlb() Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 14/28] KVM: x86: hyper-v: Allow puring all TLB flush FIFOs Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 15/28] KVM: nSVM: Drop svm->nested.initialized Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 16/28] KVM: nSVM: Flush both L1 and L2 ASIDs on KVM_REQ_TLB_FLUSH Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 17/28] KVM: nSVM: Always switch VMCB before leaving guest mode Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 18/28] KVM: nSVM: Split nested_svm_transition_tlb_flush() into entry/exit fns Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 19/28] KVM: nSVM: Service local TLB flushes before nested transitions Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 20/28] KVM: nSVM: Handle nested TLB flush requests through TLB_CONTROL Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 21/28] KVM: nSVM: Flush the TLB if L1 changes L2's ASID in vmcb12 Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 22/28] KVM: nSVM: Do not reset TLB_CONTROL in vmcb02 on nested VM-Enter Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 23/28] KVM: x86/mmu: Rename __kvm_mmu_invalidate_addr() to kvm_mmu_sync_addr() Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 24/28] KVM: x86/mmu: Refactor kvm_mmu_invlpg() to allow skipping the GVA flush Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 25/28] KVM: nSVM: Flush L2's ASID when emulating INVLPGA Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 26/28] KVM: nSVM: Flush the ASID on nested transitions if shared by L1 and L2 Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 27/28] KVM: nSVM: Use different ASIDs for " Yosry Ahmed
2026-07-28  0:35 ` [PATCH v1 28/28] KVM: selftests: Add a test for nested TLB flushes Yosry Ahmed
2026-07-28  1:05 ` [PATCH v1 00/28] KVM: nSVM: Optimize nSVM " Yosry Ahmed
2026-07-28  1:18   ` Sean Christopherson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260728003557.1136583-7-yosry@kernel.org \
    --to=yosry@kernel.org \
    --cc=jmattson@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=thomas.lendacky@amd.com \
    --cc=vkuznets@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox