From: "Derek J. Clark" <derekjohn.clark@gmail.com>
To: lkml@antheas.dev
Cc: W_Armin@gmx.de, corbet@lwn.net, hdegoede@redhat.com,
ilpo.jarvinen@linux.intel.com, jdelvare@suse.com,
kuurtb@gmail.com, linux-doc@vger.kernel.org,
linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
platform-driver-x86@vger.kernel.org,
"Derek J. Clark" <derekjohn.clark@gmail.com>
Subject: [PATCH 4/6] platform/x86: msi-wmi-platform: Clean up devices
Date: Mon, 3 Aug 2026 15:16:12 -0700 [thread overview]
Message-ID: <20260803221614.59324-5-derekjohn.clark@gmail.com> (raw)
In-Reply-To: <20260803221614.59324-1-derekjohn.clark@gmail.com>
The current driver has multiple minor mistakes. Fix them all in one
cleanup patch.
- Device names are inconsistent/incorrect for the quirk table
- Per the Windows DLL, PL2 must always be at least 1W higher than
PL1. Give PL1 and PL2 different minimum values.
- Copy buffer before write to ensure payload is sent instead of stale
data
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
---
drivers/platform/x86/msi-wmi-platform.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/platform/x86/msi-wmi-platform.c b/drivers/platform/x86/msi-wmi-platform.c
index fdc2f6f4ca7e..35cd35fc6446 100644
--- a/drivers/platform/x86/msi-wmi-platform.c
+++ b/drivers/platform/x86/msi-wmi-platform.c
@@ -124,8 +124,9 @@ struct msi_wmi_platform_quirk {
bool charge_threshold; /* Charge threshold is supported */
bool dual_fans; /* For devices with two hwmon fans */
bool restore_curves; /* Restore factory curves on unload */
- int pl_min; /* Minimum PLx value */
+ int pl1_min; /* Minimum PL1 value */
int pl1_max; /* Maximum PL1 value */
+ int pl2_min; /* Minimum PL2 value */
int pl2_max; /* Maximum PL2 value */
};
@@ -229,8 +230,9 @@ static struct msi_wmi_platform_quirk quirk_gen1 = {
.charge_threshold = true,
.dual_fans = true,
.restore_curves = true,
- .pl_min = 8,
+ .pl1_min = 8,
.pl1_max = 43,
+ .pl2_min = 9,
.pl2_max = 45
};
static struct msi_wmi_platform_quirk quirk_gen2 = {
@@ -238,14 +240,15 @@ static struct msi_wmi_platform_quirk quirk_gen2 = {
.charge_threshold = true,
.dual_fans = true,
.restore_curves = true,
- .pl_min = 8,
+ .pl1_min = 8,
.pl1_max = 30,
+ .pl2_min = 9,
.pl2_max = 37
};
static const struct dmi_system_id msi_quirks[] = {
{
- .ident = "MSI Claw (gen 1)",
+ .ident = "MSI Claw A1M",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
DMI_MATCH(DMI_BOARD_NAME, "MS-1T41"),
@@ -253,7 +256,7 @@ static const struct dmi_system_id msi_quirks[] = {
.driver_data = &quirk_gen1,
},
{
- .ident = "MSI Claw AI+ 7",
+ .ident = "MSI Claw 7 AI+ A2VM",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
DMI_MATCH(DMI_BOARD_NAME, "MS-1T42"),
@@ -261,7 +264,7 @@ static const struct dmi_system_id msi_quirks[] = {
.driver_data = &quirk_gen2,
},
{
- .ident = "MSI Claw AI+ 8",
+ .ident = "MSI Claw 8 AI+ A2VM",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
DMI_MATCH(DMI_BOARD_NAME, "MS-1T52"),
@@ -1131,7 +1134,7 @@ static int msi_wmi_fw_attrs_init(struct msi_wmi_platform_data *data)
if (data->quirks->pl1_max) {
err = msi_fw_attr_init(data, MSI_ATTR_PPT_PL1_SPL,
- &fw_attr_type_int, data->quirks->pl_min,
+ &fw_attr_type_int, data->quirks->pl1_min,
data->quirks->pl1_max, &data_get_value,
&data_set_value);
if (err)
@@ -1140,7 +1143,7 @@ static int msi_wmi_fw_attrs_init(struct msi_wmi_platform_data *data)
if (data->quirks->pl2_max) {
err = msi_fw_attr_init(data, MSI_ATTR_PPT_PL2_SPPT,
- &fw_attr_type_int, data->quirks->pl_min,
+ &fw_attr_type_int, data->quirks->pl2_min,
data->quirks->pl2_max, &data_get_value,
&data_set_value);
if (err)
@@ -1259,6 +1262,7 @@ static ssize_t msi_wmi_platform_debugfs_write(struct file *fp, const char __user
return ret;
down_write(&data->buffer_lock);
+ memcpy(data->buffer, payload, data->length);
ret = msi_wmi_platform_query(data->data, data->method, data->buffer,
data->length);
up_write(&data->buffer_lock);
@@ -1266,10 +1270,6 @@ static ssize_t msi_wmi_platform_debugfs_write(struct file *fp, const char __user
if (ret < 0)
return ret;
- down_write(&data->buffer_lock);
- memcpy(data->buffer, payload, data->length);
- up_write(&data->buffer_lock);
-
return length;
}
--
2.55.0
next prev parent reply other threads:[~2026-08-03 22:16 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-11 20:44 [PATCH v1 00/10] platform/x86: msi-wmi-platform: Add fan curves/platform profile/tdp/battery limiting Antheas Kapenekakis
2025-05-11 20:44 ` [PATCH v1 01/10] platform/x86: msi-wmi-platform: Use input buffer for returning result Antheas Kapenekakis
2025-05-11 23:31 ` Kurt Borja
2025-05-13 19:42 ` Armin Wolf
2025-05-11 20:44 ` [PATCH v1 02/10] platform/x86: msi-wmi-platform: Add unlocked msi_wmi_platform_query Antheas Kapenekakis
2025-05-12 19:21 ` Kurt Borja
2025-05-12 20:51 ` Antheas Kapenekakis
2025-05-12 21:23 ` Kurt Borja
2025-05-12 21:51 ` Antheas Kapenekakis
2025-05-13 19:45 ` Armin Wolf
2025-05-13 19:47 ` Armin Wolf
2025-05-11 20:44 ` [PATCH v1 03/10] platform/x86: msi-wmi-platform: Add quirk system Antheas Kapenekakis
2025-05-11 23:32 ` Kurt Borja
2025-05-13 20:43 ` Armin Wolf
2025-05-11 20:44 ` [PATCH v1 04/10] platform/x86: msi-wmi-platform: Add support for fan control Antheas Kapenekakis
2025-05-11 23:32 ` Kurt Borja
2025-05-13 20:58 ` Armin Wolf
2025-05-19 1:35 ` Armin Wolf
2025-05-11 20:44 ` [PATCH v1 05/10] platform/x86: msi-wmi-platform: Add platform profile through shift mode Antheas Kapenekakis
2025-05-11 23:33 ` Kurt Borja
2025-05-12 21:59 ` Antheas Kapenekakis
2025-05-19 1:51 ` Armin Wolf
2025-05-19 1:58 ` Armin Wolf
2025-05-11 20:44 ` [PATCH v1 06/10] platform/x86: msi-wmi-platform: Add PL1/PL2 support via firmware attributes Antheas Kapenekakis
2025-05-11 23:34 ` Kurt Borja
2025-05-12 10:22 ` Antheas Kapenekakis
2025-05-19 2:08 ` Armin Wolf
2025-05-11 20:44 ` [PATCH v1 07/10] platform/x86: msi-wmi-platform: Add charge_threshold support Antheas Kapenekakis
2025-05-11 23:34 ` Kurt Borja
2025-05-19 2:32 ` Armin Wolf
2025-05-11 20:44 ` [PATCH v1 08/10] platform/x86: msi-wmi-platform: Drop excess fans in dual fan devices Antheas Kapenekakis
2025-05-11 23:35 ` Kurt Borja
2025-05-11 20:44 ` [PATCH v1 09/10] platform/x86: msi-wmi-platform: Update header text Antheas Kapenekakis
2025-05-19 2:33 ` Armin Wolf
2025-05-11 20:44 ` [PATCH v1 10/10] platform/x86: msi-wmi-platform: Restore fan curves on PWM disable and unload Antheas Kapenekakis
2025-05-12 19:16 ` Kurt Borja
2025-05-12 20:50 ` Antheas Kapenekakis
2025-05-11 23:30 ` [PATCH v1 00/10] platform/x86: msi-wmi-platform: Add fan curves/platform profile/tdp/battery limiting Kurt Borja
2025-05-12 10:16 ` Antheas Kapenekakis
2025-05-12 19:05 ` Kurt Borja
2025-05-19 2:37 ` Armin Wolf
2025-05-30 20:50 ` Antheas Kapenekakis
2025-05-30 21:15 ` Armin Wolf
2025-05-30 21:28 ` Antheas Kapenekakis
2025-05-30 22:00 ` Armin Wolf
2026-05-08 18:41 ` Derek J. Clark
2026-05-09 17:25 ` Antheas Kapenekakis
2026-08-03 22:16 ` [PATCH 0/6] " Derek J. Clark
2026-08-03 22:16 ` [PATCH 1/6] platform/x86: msi-wmi-platform: Move guard out of switch in platform_write() Derek J. Clark
2026-08-03 22:16 ` [PATCH 2/6] platform/x86: msi-wmi-platform: fix: Remove unused err Derek J. Clark
2026-08-03 22:16 ` [PATCH 3/6] platform/x86: msi-wmi-platform: terminate msi_quirks DMI table Derek J. Clark
2026-08-03 22:16 ` Derek J. Clark [this message]
2026-08-03 22:16 ` [PATCH 5/6] platform/x86: wmi-msi-platform: Add MSI Claw A8 support Derek J. Clark
2026-08-03 22:16 ` [PATCH 6/6] platform-x86: msi-wmi-platform: Add Gen 4 device Derek J. Clark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260803221614.59324-5-derekjohn.clark@gmail.com \
--to=derekjohn.clark@gmail.com \
--cc=W_Armin@gmx.de \
--cc=corbet@lwn.net \
--cc=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jdelvare@suse.com \
--cc=kuurtb@gmail.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lkml@antheas.dev \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox