From: "Derek J. Clark" <derekjohn.clark@gmail.com>
To: lkml@antheas.dev
Cc: W_Armin@gmx.de, corbet@lwn.net, hdegoede@redhat.com,
ilpo.jarvinen@linux.intel.com, jdelvare@suse.com,
kuurtb@gmail.com, linux-doc@vger.kernel.org,
linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
platform-driver-x86@vger.kernel.org,
"Derek J. Clark" <derekjohn.clark@gmail.com>
Subject: [PATCH 6/6] platform-x86: msi-wmi-platform: Add Gen 4 device
Date: Mon, 3 Aug 2026 15:16:14 -0700 [thread overview]
Message-ID: <20260803221614.59324-7-derekjohn.clark@gmail.com> (raw)
In-Reply-To: <20260803221614.59324-1-derekjohn.clark@gmail.com>
Adds support for the MSI Claw 8 EX AI+. This device uses a unique new
shift mode for custom TDP not previously exposed by this driver. To
ensure that "MSI_SHIFT_MODE_USER" can still be set in the future to
CUSTOM platform profile, store the shift mode that applies to custom in
the quirks and check it outside the switch case in _get() since it is no
longer a compile time const.
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
---
drivers/platform/x86/msi-wmi-platform.c | 38 ++++++++++++++++++++++---
1 file changed, 34 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/x86/msi-wmi-platform.c b/drivers/platform/x86/msi-wmi-platform.c
index 8d11dad99776..0b1b64182cc3 100644
--- a/drivers/platform/x86/msi-wmi-platform.c
+++ b/drivers/platform/x86/msi-wmi-platform.c
@@ -271,6 +271,17 @@ static struct msi_wmi_platform_quirk quirk_gen3 = {
.pl3_min = 10,
.pl3_max = 48,
};
+static struct msi_wmi_platform_quirk quirk_gen4 = {
+ .shift_mode = true,
+ .charge_threshold = true,
+ .dual_fans = true,
+ .restore_curves = true,
+ .custom_shift = MSI_PLATFORM_SHIFT_MANUAL,
+ .pl1_min = 8,
+ .pl1_max = 35,
+ .pl2_min = 9,
+ .pl2_max = 45,
+};
static const struct dmi_system_id msi_quirks[] = {
{
@@ -305,6 +316,14 @@ static const struct dmi_system_id msi_quirks[] = {
},
.driver_data = &quirk_gen3,
},
+ {
+ .ident = "MSI Claw 8 EX AI+ CG3EM",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "MS-1T91"),
+ },
+ .driver_data = &quirk_gen4,
+ },
{ }
};
@@ -805,10 +824,16 @@ static const struct hwmon_chip_info msi_wmi_platform_chip_info_dual = {
static int msi_wmi_platform_profile_probe(void *drvdata, unsigned long *choices)
{
+ struct msi_wmi_platform_data *data = drvdata;
+
set_bit(PLATFORM_PROFILE_LOW_POWER, choices);
set_bit(PLATFORM_PROFILE_BALANCED, choices);
set_bit(PLATFORM_PROFILE_BALANCED_PERFORMANCE, choices);
set_bit(PLATFORM_PROFILE_PERFORMANCE, choices);
+
+ if (data->quirks->custom_shift)
+ set_bit(PLATFORM_PROFILE_CUSTOM, choices);
+
return 0;
}
@@ -816,6 +841,7 @@ static int msi_wmi_platform_profile_get(struct device *dev,
enum platform_profile_option *profile)
{
struct msi_wmi_platform_data *data = dev_get_drvdata(dev);
+ u8 custom = data->quirks->custom_shift;
int ret;
u8 buffer[32] = { };
@@ -829,6 +855,11 @@ static int msi_wmi_platform_profile_get(struct device *dev,
if (buffer[0] != 1)
return -EINVAL;
+ if (custom && buffer[1] == custom) {
+ *profile = PLATFORM_PROFILE_CUSTOM;
+ return 0;
+ }
+
switch (buffer[1]) {
case MSI_PLATFORM_SHIFT_SPORT:
*profile = PLATFORM_PROFILE_PERFORMANCE;
@@ -842,9 +873,6 @@ static int msi_wmi_platform_profile_get(struct device *dev,
case MSI_PLATFORM_SHIFT_ECO:
*profile = PLATFORM_PROFILE_LOW_POWER;
return 0;
- case MSI_PLATFORM_SHIFT_USER:
- *profile = PLATFORM_PROFILE_CUSTOM;
- return 0;
default:
return -EINVAL;
}
@@ -872,7 +900,9 @@ static int msi_wmi_platform_profile_set(struct device *dev,
buffer[1] = MSI_PLATFORM_SHIFT_ECO;
break;
case PLATFORM_PROFILE_CUSTOM:
- buffer[1] = MSI_PLATFORM_SHIFT_USER;
+ if (!data->quirks->custom_shift)
+ return -EINVAL;
+ buffer[1] = data->quirks->custom_shift;
break;
default:
return -EINVAL;
--
2.55.0
prev parent reply other threads:[~2026-08-03 22:16 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-11 20:44 [PATCH v1 00/10] platform/x86: msi-wmi-platform: Add fan curves/platform profile/tdp/battery limiting Antheas Kapenekakis
2025-05-11 20:44 ` [PATCH v1 01/10] platform/x86: msi-wmi-platform: Use input buffer for returning result Antheas Kapenekakis
2025-05-11 23:31 ` Kurt Borja
2025-05-13 19:42 ` Armin Wolf
2025-05-11 20:44 ` [PATCH v1 02/10] platform/x86: msi-wmi-platform: Add unlocked msi_wmi_platform_query Antheas Kapenekakis
2025-05-12 19:21 ` Kurt Borja
2025-05-12 20:51 ` Antheas Kapenekakis
2025-05-12 21:23 ` Kurt Borja
2025-05-12 21:51 ` Antheas Kapenekakis
2025-05-13 19:45 ` Armin Wolf
2025-05-13 19:47 ` Armin Wolf
2025-05-11 20:44 ` [PATCH v1 03/10] platform/x86: msi-wmi-platform: Add quirk system Antheas Kapenekakis
2025-05-11 23:32 ` Kurt Borja
2025-05-13 20:43 ` Armin Wolf
2025-05-11 20:44 ` [PATCH v1 04/10] platform/x86: msi-wmi-platform: Add support for fan control Antheas Kapenekakis
2025-05-11 23:32 ` Kurt Borja
2025-05-13 20:58 ` Armin Wolf
2025-05-19 1:35 ` Armin Wolf
2025-05-11 20:44 ` [PATCH v1 05/10] platform/x86: msi-wmi-platform: Add platform profile through shift mode Antheas Kapenekakis
2025-05-11 23:33 ` Kurt Borja
2025-05-12 21:59 ` Antheas Kapenekakis
2025-05-19 1:51 ` Armin Wolf
2025-05-19 1:58 ` Armin Wolf
2025-05-11 20:44 ` [PATCH v1 06/10] platform/x86: msi-wmi-platform: Add PL1/PL2 support via firmware attributes Antheas Kapenekakis
2025-05-11 23:34 ` Kurt Borja
2025-05-12 10:22 ` Antheas Kapenekakis
2025-05-19 2:08 ` Armin Wolf
2025-05-11 20:44 ` [PATCH v1 07/10] platform/x86: msi-wmi-platform: Add charge_threshold support Antheas Kapenekakis
2025-05-11 23:34 ` Kurt Borja
2025-05-19 2:32 ` Armin Wolf
2025-05-11 20:44 ` [PATCH v1 08/10] platform/x86: msi-wmi-platform: Drop excess fans in dual fan devices Antheas Kapenekakis
2025-05-11 23:35 ` Kurt Borja
2025-05-11 20:44 ` [PATCH v1 09/10] platform/x86: msi-wmi-platform: Update header text Antheas Kapenekakis
2025-05-19 2:33 ` Armin Wolf
2025-05-11 20:44 ` [PATCH v1 10/10] platform/x86: msi-wmi-platform: Restore fan curves on PWM disable and unload Antheas Kapenekakis
2025-05-12 19:16 ` Kurt Borja
2025-05-12 20:50 ` Antheas Kapenekakis
2025-05-11 23:30 ` [PATCH v1 00/10] platform/x86: msi-wmi-platform: Add fan curves/platform profile/tdp/battery limiting Kurt Borja
2025-05-12 10:16 ` Antheas Kapenekakis
2025-05-12 19:05 ` Kurt Borja
2025-05-19 2:37 ` Armin Wolf
2025-05-30 20:50 ` Antheas Kapenekakis
2025-05-30 21:15 ` Armin Wolf
2025-05-30 21:28 ` Antheas Kapenekakis
2025-05-30 22:00 ` Armin Wolf
2026-05-08 18:41 ` Derek J. Clark
2026-05-09 17:25 ` Antheas Kapenekakis
2026-08-03 22:16 ` [PATCH 0/6] " Derek J. Clark
2026-08-03 22:16 ` [PATCH 1/6] platform/x86: msi-wmi-platform: Move guard out of switch in platform_write() Derek J. Clark
2026-08-03 22:16 ` [PATCH 2/6] platform/x86: msi-wmi-platform: fix: Remove unused err Derek J. Clark
2026-08-03 22:16 ` [PATCH 3/6] platform/x86: msi-wmi-platform: terminate msi_quirks DMI table Derek J. Clark
2026-08-03 22:16 ` [PATCH 4/6] platform/x86: msi-wmi-platform: Clean up devices Derek J. Clark
2026-08-03 22:16 ` [PATCH 5/6] platform/x86: wmi-msi-platform: Add MSI Claw A8 support Derek J. Clark
2026-08-03 22:16 ` Derek J. Clark [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260803221614.59324-7-derekjohn.clark@gmail.com \
--to=derekjohn.clark@gmail.com \
--cc=W_Armin@gmx.de \
--cc=corbet@lwn.net \
--cc=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jdelvare@suse.com \
--cc=kuurtb@gmail.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lkml@antheas.dev \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox