[PATCH v3 0/5] Initial device tree support for StarFive JHB100 SoC

[PATCH v3 0/5] Initial device tree support for StarFive JHB100 SoC

[Changhuang Liang]

StarFive JHB100 SoC consists of 4 RISC-V low power Cores (Dubhe-70). It
also features various interfaces such as I2C, SPI, CAN, USB, MMC, Uart,
etc.

This patch series introduces initial SoC DTSI support for the StarFive
JHB100 SoC. The relevant dt-binding documentation has been updated
accordingly. Below is the list of IP blocks added in the initial SoC DTSI.

- StarFive Dubhe-70 CPU
- PMU
- PLIC
- CLINT
- UART
- INTC

changes since v2:
- Add a new patch 4

patch 5:
- Remove the 'riscv,isa' property.
- Add 'starfive,jhb100-uart' to the UART node.
- Update bus node name.
- Remove the interrupts-extended property in riscv,pmu

v2: https://lore.kernel.org/all/20260506085937.754808-1-changhuang.liang@starfivetech.com/
v1: https://lore.kernel.org/all/20260402084019.440708-1-changhuang.liang@starfivetech.com/

Changhuang Liang (1):
  dt-bindings: serial: snps-dw-apb-uart: Add StarFive JHB100 UART
    compatible

Ji Sheng Teoh (1):
  dt-bindings: riscv: Add StarFive Dubhe-70 compatibles

Ley Foon Tan (3):
  dt-bindings: interrupt-controller: Add StarFive JHB100 plic
  dt-bindings: riscv: Add StarFive JHB100 SoC
  riscv: dts: starfive: jhb100: Add JHB100 base DT

 .../sifive,plic-1.0.0.yaml                    |   1 +
 .../devicetree/bindings/riscv/cpus.yaml       |   1 +
 .../devicetree/bindings/riscv/starfive.yaml   |   5 +
 .../bindings/serial/snps-dw-apb-uart.yaml     |   1 +
 MAINTAINERS                                   |   6 +
 arch/riscv/boot/dts/starfive/Makefile         |   2 +
 arch/riscv/boot/dts/starfive/jhb100-evb1.dts  |  32 ++
 arch/riscv/boot/dts/starfive/jhb100.dtsi      | 331 ++++++++++++++++++
 8 files changed, 379 insertions(+)
 create mode 100644 arch/riscv/boot/dts/starfive/jhb100-evb1.dts
 create mode 100644 arch/riscv/boot/dts/starfive/jhb100.dtsi

--
2.25.1

[PATCH v3 1/5] dt-bindings: riscv: Add StarFive Dubhe-70 compatibles

[Changhuang Liang]

From: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>

Add new compatible string for Dubhe-70.
Dubhe-70 is a low power RISC-V cpu core from StarFive Technology.

Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
---
 Documentation/devicetree/bindings/riscv/cpus.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
index 5feeb2203050..e7eda7a9c345 100644
--- a/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -63,6 +63,7 @@ properties:
               - sifive,u74-mc
               - spacemit,x100
               - spacemit,x60
+              - starfive,dubhe-70
               - thead,c906
               - thead,c908
               - thead,c910
-- 
2.25.1

[PATCH v3 2/5] dt-bindings: interrupt-controller: Add StarFive JHB100 plic

[Changhuang Liang]

From: Ley Foon Tan <leyfoon.tan@starfivetech.com>

Add compatible string for StarFive JHB100 plic.

Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
---
 .../bindings/interrupt-controller/sifive,plic-1.0.0.yaml         | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index 78d8cd77b4ec..cde4bb691897 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -66,6 +66,7 @@ properties:
               - spacemit,k1-plic
               - starfive,jh7100-plic
               - starfive,jh7110-plic
+              - starfive,jhb100-plic
               - tenstorrent,blackhole-plic
           - const: sifive,plic-1.0.0
       - items:
-- 
2.25.1

[PATCH v3 3/5] dt-bindings: riscv: Add StarFive JHB100 SoC

[Changhuang Liang]

From: Ley Foon Tan <leyfoon.tan@starfivetech.com>

Add device tree bindings for the StarFive JHB100 RISC-V SoC.

Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
---
 Documentation/devicetree/bindings/riscv/starfive.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/riscv/starfive.yaml b/Documentation/devicetree/bindings/riscv/starfive.yaml
index 8ba0e10b529a..277618efff6e 100644
--- a/Documentation/devicetree/bindings/riscv/starfive.yaml
+++ b/Documentation/devicetree/bindings/riscv/starfive.yaml
@@ -43,6 +43,11 @@ properties:
           - const: starfive,jh7110s
           - const: starfive,jh7110
 
+      - items:
+          - enum:
+              - starfive,jhb100-evb1
+          - const: starfive,jhb100
+
 additionalProperties: true
 
 ...
-- 
2.25.1

[PATCH v3 4/5] dt-bindings: serial: snps-dw-apb-uart: Add StarFive JHB100 UART compatible

[Changhuang Liang]

Add "starfive,jhb100-uart" compatible string, with "snps,dw-apb-uart"
as the fallback.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
index c0d0524458c1..f90ba8f3d4f6 100644
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -79,6 +79,7 @@ properties:
               - starfive,jh7100-hsuart
               - starfive,jh7100-uart
               - starfive,jh7110-uart
+              - starfive,jhb100-uart
               - ultrarisc,dp1000-uart
           - const: snps,dw-apb-uart
       - const: snps,dw-apb-uart
-- 
2.25.1

Re: [PATCH v3 4/5] dt-bindings: serial: snps-dw-apb-uart: Add StarFive JHB100 UART compatible

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 75 bytes --]

Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[PATCH v3 5/5] riscv: dts: starfive: jhb100: Add JHB100 base DT

[Changhuang Liang]

From: Ley Foon Tan <leyfoon.tan@starfivetech.com>

Add JHB100 base dtsi and dts. Consist of 4 Dubhe-70 cores, CLINT, PLIC,
PMU, UART, INTC and 1GB DDR.

Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 MAINTAINERS                                  |   6 +
 arch/riscv/boot/dts/starfive/Makefile        |   2 +
 arch/riscv/boot/dts/starfive/jhb100-evb1.dts |  32 ++
 arch/riscv/boot/dts/starfive/jhb100.dtsi     | 331 +++++++++++++++++++
 4 files changed, 371 insertions(+)
 create mode 100644 arch/riscv/boot/dts/starfive/jhb100-evb1.dts
 create mode 100644 arch/riscv/boot/dts/starfive/jhb100.dtsi

diff --git a/MAINTAINERS b/MAINTAINERS
index 56b337a06447..ce97de46e610 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -26069,6 +26069,12 @@ F:	Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
 F:	drivers/phy/starfive/phy-jh7110-pcie.c
 F:	drivers/phy/starfive/phy-jh7110-usb.c
 
+STARFIVE JHB100 DEVICETREES
+M:	Changhuang Liang <changhuang.liang@starfivetech.com>
+L:	linux-riscv@lists.infradead.org
+S:	Supported
+F:	arch/riscv/boot/dts/starfive/jhb100*
+
 STARFIVE JHB100 EXTERNAL INTERRUPT CONTROLLER DRIVER
 M:	Changhuang Liang <changhuang.liang@starfivetech.com>
 S:	Supported
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index 3dd1f05283f7..42841942fe54 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -18,3 +18,5 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-lite.dtb
 dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-lite-emmc.dtb
 dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
 dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
+
+dtb-$(CONFIG_ARCH_STARFIVE) += jhb100-evb1.dtb
diff --git a/arch/riscv/boot/dts/starfive/jhb100-evb1.dts b/arch/riscv/boot/dts/starfive/jhb100-evb1.dts
new file mode 100644
index 000000000000..462b6fb7953b
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jhb100-evb1.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (c) 2024-2026 StarFive Technology Co., Ltd.
+ */
+
+#include "jhb100.dtsi"
+
+/ {
+	model = "StarFive JHB100 EVB-1";
+	compatible = "starfive,jhb100-evb1", "starfive,jhb100";
+
+	aliases {
+		serial6 = &uart6;
+	};
+
+	chosen {
+		stdout-path = "serial6:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <5000000>;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x40000000>;	/* 1GB */
+	};
+};
+
+&uart6 {
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/starfive/jhb100.dtsi b/arch/riscv/boot/dts/starfive/jhb100.dtsi
new file mode 100644
index 000000000000..14ab83ed4482
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jhb100.dtsi
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (c) 2024-2026 StarFive Technology Co., Ltd.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "starfive,jhb100";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "starfive,dubhe-70", "riscv";
+			reg = <0x0>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "h", "zba", "zbb",
+					       "zbc", "zbs", "zicbom", "zicbop", "zicboz", "zicntr",
+					       "zicond", "zicsr", "zifencei", "zihintpause",
+					       "zihpm", "svinval", "svnapot", "sscofpmf";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <512>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <16>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <512>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <24>;
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2c0>;
+			tlb-split;
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu1: cpu@1 {
+			compatible = "starfive,dubhe-70", "riscv";
+			reg = <0x1>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "h", "zba", "zbb",
+					       "zbc", "zbs", "zicbom", "zicbop", "zicboz", "zicntr",
+					       "zicond", "zicsr", "zifencei", "zihintpause",
+					       "zihpm", "svinval", "svnapot", "sscofpmf";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <512>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <16>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <512>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <24>;
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2c1>;
+			tlb-split;
+
+			cpu1_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu2: cpu@2 {
+			compatible = "starfive,dubhe-70", "riscv";
+			reg = <0x2>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "h", "zba", "zbb",
+					       "zbc", "zbs", "zicbom", "zicbop", "zicboz", "zicntr",
+					       "zicond", "zicsr", "zifencei", "zihintpause",
+					       "zihpm", "svinval", "svnapot", "sscofpmf";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <512>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <16>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <512>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <24>;
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2c2>;
+			tlb-split;
+
+			cpu2_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu3: cpu@3 {
+			compatible = "starfive,dubhe-70", "riscv";
+			reg = <0x3>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "h", "zba", "zbb",
+					       "zbc", "zbs", "zicbom", "zicbop", "zicboz", "zicntr",
+					       "zicond", "zicsr", "zifencei", "zihintpause",
+					       "zihpm", "svinval", "svnapot", "sscofpmf";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <512>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <16>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <512>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <24>;
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2c3>;
+			tlb-split;
+
+			cpu3_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+			};
+
+			cluster3 {
+				core0 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		l2c0: cache-controller-0 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <2048>;
+			cache-size = <0x20000>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2c1: cache-controller-1 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <2048>;
+			cache-size = <0x20000>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2c2: cache-controller-2 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <2048>;
+			cache-size = <0x20000>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2c3: cache-controller-3 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <2048>;
+			cache-size = <0x20000>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l3_cache: cache-controller-4 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <3>;
+			cache-sets = <1024>;
+			cache-size = <0x20000>;
+			cache-unified;
+		};
+	};
+
+	pmu {
+		compatible = "riscv,pmu";
+
+		riscv,event-to-mhpmevent = <0x00005 0x0000 0xA>,
+					   <0x00006 0x0000 0xB>,
+					   <0x00008 0x0000 0x10>,
+					   <0x00009 0x0000 0xF>,
+					   <0x10000 0x0000 0x19>,
+					   <0x10001 0x0000 0x1A>,
+					   <0x10002 0x0000 0x1B>,
+					   <0x10003 0x0000 0x1C>,
+					   <0x10008 0x0000 0x8>,
+					   <0x10009 0x0000 0x9>,
+					   <0x1000C 0x0000 0x9E>,
+					   <0x1000D 0x0000 0x9F>,
+					   <0x10010 0x0000 0x1D>,
+					   <0x10011 0x0000 0x1E>,
+					   <0x10012 0x0000 0x1F>,
+					   <0x10013 0x0000 0x20>,
+					   <0x10014 0x0000 0x21>,
+					   <0x10018 0x0000 0x17>,
+					   <0x10019 0x0000 0x18>,
+					   <0x10020 0x0000 0x8>,
+					   <0x10021 0x0000 0x7>;
+
+		riscv,event-to-mhpmcounters = <0x00005 0x00006 0x00007FF8>,
+					      <0x00008 0x00009 0x00007FF8>,
+					      <0x10000 0x10003 0x00007FF8>,
+					      <0x10008 0x10009 0x00007FF8>,
+					      <0x1000C 0x1000D 0x00007FF8>,
+					      <0x10010 0x10014 0x00007FF8>,
+					      <0x10018 0x10019 0x00007FF8>,
+					      <0x10020 0x10021 0x00007FF8>;
+
+		riscv,raw-event-to-mhpmcounters =
+			<0x00 0x00 0xFFFFFFFF 0xFFFFFFE0 0x00007FF8>,	/* Event ID 1-31 */
+			<0x00 0x20 0xFFFFFFFF 0xFFFFFFFE 0x00007FF8>,	/* Event ID 32-33 */
+			<0x00 0x22 0xFFFFFFFF 0xFFFFFF22 0x00007FF8>;	/* Event ID 34 */
+	};
+
+	clk_uart: clock-uart {
+		compatible = "fixed-clock"; /* Initial clock handler for UART */
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ranges;
+
+		clint: timer@2000000 {
+			compatible = "starfive,jhb100-clint", "sifive,clint0";
+			reg = <0x0 0x02000000 0x0 0x10000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>,
+					      <&cpu2_intc 3>, <&cpu2_intc 7>,
+					      <&cpu3_intc 3>, <&cpu3_intc 7>;
+		};
+
+		plic: interrupt-controller@c000000 {
+			compatible = "starfive,jhb100-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0x0c000000 0x0 0x4000000>;
+			riscv,ndev = <400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>,
+					      <&cpu2_intc 11>, <&cpu2_intc 9>,
+					      <&cpu3_intc 11>, <&cpu3_intc 9>;
+		};
+
+		bus_nioc: bus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			dma-noncoherent;
+			dma-ranges = <0x4 0x00000000 0x0 0x40000000 0x2 0x0>,
+				     <0x4 0x00000000 0x4 0x00000000 0x2 0x0>;
+			ranges;
+
+			uart6: serial@11982000 {
+				compatible = "starfive,jhb100-uart", "snps,dw-apb-uart";
+				reg = <0x0 0x11982000 0x0 0x400>;
+				clocks = <&clk_uart>, <&clk_uart>;
+				clock-names = "baudclk", "apb_pclk";
+				interrupt-parent = <&intc>;
+				interrupts = <26>;
+				reg-io-width = <4>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			intc: interrupt-controller@13220000 {
+				compatible = "starfive,jhb100-intc";
+				reg = <0x0 0x13220000 0x0 0x80>;
+				interrupts = <1>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+};
-- 
2.25.1

Re: [PATCH v3 5/5] riscv: dts: starfive: jhb100: Add JHB100 base DT

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 406 bytes --]

On Thu, Aug 06, 2026 at 05:25:53AM -0700, Changhuang Liang wrote:
> +
> +	clk_uart: clock-uart {
> +		compatible = "fixed-clock"; /* Initial clock handler for UART */
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +	};

I can pick this series up on a provisional basis for you to work on top
of, but I won't be sending a PR for anything that contains temporary
fixed clocks.

Cheers,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v3 5/5] riscv: dts: starfive: jhb100: Add JHB100 base DT

[Changhuang Liang]

Hi, Conor

Thanks for the review.

> On Thu, Aug 06, 2026 at 05:25:53AM -0700, Changhuang Liang wrote:
> > +
> > +	clk_uart: clock-uart {
> > +		compatible = "fixed-clock"; /* Initial clock handler for UART */
> > +		#clock-cells = <0>;
> > +		clock-frequency = <25000000>;
> > +	};
> 
> I can pick this series up on a provisional basis for you to work on top of, but I
> won't be sending a PR for anything that contains temporary fixed clocks.

That's great.

Once my other two series are also ready:

Add basic clocks and resets for JHB100 SoC
Add StarFive JHB100 syscon modules

I can squash these three device tree into a single patch and send it out, so there won't be 
any temporarily used clk_uart and PLL nodes.

Best Regards,
Changhuang