[PATCH 0/2] dt-bindings: clock: ti,dra7-atl: convert to dt-schema

[PATCH 0/2] dt-bindings: clock: ti,dra7-atl: convert to dt-schema

[Bhargav Joshi]

Convert the DRA7 ATL (Audio Tracking Logic) text binding to dt-schema.
The original dra7-atl.txt contains two bindings mixed in one file:
- ti,dra7-atl-clock: clock output nodes for the common clock framework
- ti,dra7-atl: IP controller with register configuration

This series splits them into two separate YAML schemas.
Patch 1 converts the clock output binding.
Patch 2 converts the IP controller binding.

Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
---
Bhargav Joshi (2):
      dt-bindings: clock: ti,dra7-atl-clock: convert to DT schema
      dt-bindings: clock: ti,dra7-atl: convert to dt-schema

 .../devicetree/bindings/clock/ti/dra7-atl.txt      | 94 ---------------------
 .../bindings/clock/ti/ti,dra7-atl-clock.yaml       | 38 +++++++++
 .../devicetree/bindings/clock/ti/ti,dra7-atl.yaml  | 98 ++++++++++++++++++++++
 3 files changed, 136 insertions(+), 94 deletions(-)
---
base-commit: d58772d8520c7ef247c4b95c9bd76d3a25da9ff5
change-id: 20260812-ti-dra7-atl-4ec2740f9070

Best regards,
-- 
Bhargav

[PATCH 1/2] dt-bindings: clock: ti,dra7-atl-clock: convert to DT schema

[Bhargav Joshi]

Convert the clock output portion of the DRA7 ATL (Audio Tracking Logic)
binding from text to DT schema. property clock-output-names is added
that is used by existing dts/dtsi.

Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
---
 .../devicetree/bindings/clock/ti/dra7-atl.txt      | 38 ----------------------
 .../bindings/clock/ti/ti,dra7-atl-clock.yaml       | 38 ++++++++++++++++++++++
 2 files changed, 38 insertions(+), 38 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
index 68504079f99f..e3c05844ae86 100644
--- a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
+++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
@@ -9,20 +9,6 @@ signals - can compensate the drift between the two ws signal.
 In order to provide the support for ATL and its output clocks (which can be used
 internally within the SoC or external components) two sets of bindings is needed:
 
-Clock tree binding:
-This binding uses the common clock binding[1].
-To be able to integrate the ATL clocks with DT clock tree.
-Provides ccf level representation of the ATL clocks to be used by drivers.
-Since the clock instances are part of a single IP this binding is used as a node
-for the DT clock tree, the IP driver is needed to handle the actual configuration
-of the IP.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be "ti,dra7-atl-clock"
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : link phandles to functional clock of ATL
 
 Binding for the IP driver:
 This binding is used to configure the IP driver which is going to handle the
@@ -47,30 +33,6 @@ For valid word select signals, see the dt-bindings/clock/ti-dra7-atl.h include
 file.
 
 Examples:
-/* clock bindings for atl provided clocks */
-atl_clkin0_ck: atl_clkin0_ck {
-	#clock-cells = <0>;
-	compatible = "ti,dra7-atl-clock";
-	clocks = <&atl_gfclk_mux>;
-};
-
-atl_clkin1_ck: atl_clkin1_ck {
-	#clock-cells = <0>;
-	compatible = "ti,dra7-atl-clock";
-	clocks = <&atl_gfclk_mux>;
-};
-
-atl_clkin2_ck: atl_clkin2_ck {
-	#clock-cells = <0>;
-	compatible = "ti,dra7-atl-clock";
-	clocks = <&atl_gfclk_mux>;
-};
-
-atl_clkin3_ck: atl_clkin3_ck {
-	#clock-cells = <0>;
-	compatible = "ti,dra7-atl-clock";
-	clocks = <&atl_gfclk_mux>;
-};
 
 /* binding for the IP */
 atl: atl@4843c000 {
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,dra7-atl-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,dra7-atl-clock.yaml
new file mode 100644
index 000000000000..c0795f4abcfa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,dra7-atl-clock.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,dra7-atl-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DRA7 ATL (Audio Tracking Logic) clock output
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@ti.com>
+
+properties:
+  compatible:
+    const: ti,dra7-atl-clock
+
+  "#clock-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    atl_clkin0_ck {
+        compatible = "ti,dra7-atl-clock";
+        #clock-cells = <0>;
+        clocks = <&atl_gfclk_mux>;
+    };

-- 
2.55.0

[PATCH 2/2] dt-bindings: clock: ti,dra7-atl: convert to dt-schema

[Bhargav Joshi]

Convert the IP driver portion of the DRA7 ATL (Audio Tracking Logic)
binding from the freeform text binding to dt-schema. Together with
ti,dra7-atl-clock.yaml this fully replaces dra7-atl.txt.

ti,hwmods is marked deprecated as modern DTS uses ti,sysc target-module
wrappers and the property is absent from current dra7-l4.dtsi.

bws/aws maximum set to 15 per the 16 mux sources in
dt-bindings/clock/ti-dra7-atl.h.

Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
---
 .../devicetree/bindings/clock/ti/dra7-atl.txt      | 56 -------------
 .../devicetree/bindings/clock/ti/ti,dra7-atl.yaml  | 98 ++++++++++++++++++++++
 2 files changed, 98 insertions(+), 56 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
deleted file mode 100644
index e3c05844ae86..000000000000
--- a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Device Tree Clock bindings for ATL (Audio Tracking Logic) of DRA7 SoC.
-
-The ATL IP is used to generate clock to be used to synchronize baseband and
-audio codec. A single ATL IP provides four ATL clock instances sharing the same
-functional clock but can be configured to provide different clocks.
-ATL can maintain a clock averages to some desired frequency based on the bws/aws
-signals - can compensate the drift between the two ws signal.
-
-In order to provide the support for ATL and its output clocks (which can be used
-internally within the SoC or external components) two sets of bindings is needed:
-
-
-Binding for the IP driver:
-This binding is used to configure the IP driver which is going to handle the
-configuration of the IP for the ATL clock instances.
-
-Required properties:
-- compatible : shall be "ti,dra7-atl"
-- reg : base address for the ATL IP
-- ti,provided-clocks : List of phandles to the clocks associated with the ATL
-- clocks : link phandles to functional clock of ATL
-- clock-names : Shall be set to "fck"
-- ti,hwmods : Shall be set to "atl"
-
-Optional properties:
-Configuration of ATL instances:
-- atl{0/1/2/3} {
-	- bws : Baseband word select signal selection
-	- aws : Audio word select signal selection
-};
-
-For valid word select signals, see the dt-bindings/clock/ti-dra7-atl.h include
-file.
-
-Examples:
-
-/* binding for the IP */
-atl: atl@4843c000 {
-	compatible = "ti,dra7-atl";
-	reg = <0x4843c000 0x3ff>;
-	ti,hwmods = "atl";
-	ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
-				<&atl_clkin2_ck>, <&atl_clkin3_ck>;
-	clocks = <&atl_gfclk_mux>;
-	clock-names = "fck";
-};
-
-#include <dt-bindings/clock/ti-dra7-atl.h>
-
-&atl {
-
-	atl2 {
-		bws = <DRA7_ATL_WS_MCASP2_FSX>;
-		aws = <DRA7_ATL_WS_MCASP3_FSX>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,dra7-atl.yaml b/Documentation/devicetree/bindings/clock/ti/ti,dra7-atl.yaml
new file mode 100644
index 000000000000..5460432219a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,dra7-atl.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,dra7-atl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DRA7 ATL (Audio Tracking Logic) Clock Controller
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@ti.com>
+
+description:
+  The ATL IP is used to generate clock to be used to synchronize baseband and
+  audio codec. A single ATL IP provides four ATL clock instances sharing the
+  same functional clock but can be configured to provide different clocks.
+  ATL can maintain a clock averages to some desired frequency based on the
+  bws/aws signals - can compensate the drift between the two ws signal.
+
+  See also Documentation/devicetree/bindings/clock/ti/ti,dra7-atl-clock.yaml
+
+properties:
+  compatible:
+    const: ti,dra7-atl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fck
+
+  ti,provided-clocks:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 4
+    maxItems: 4
+    description:
+      List of phandles to the clocks associated with the ATL.
+
+  ti,hwmods:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Name of the hwmod associated with the ATL.
+    deprecated: true
+    const: atl
+
+patternProperties:
+  "^atl[0-3]$":
+    type: object
+    additionalProperties: false
+    description:
+      Configuration of ATL instances.
+
+    properties:
+      bws:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Baseband word select signal selection.
+        maximum: 15
+
+      aws:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Audio word select signal selection.
+        maximum: 15
+
+    required:
+      - bws
+      - aws
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - ti,provided-clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ti-dra7-atl.h>
+
+    atl@4843c000 {
+        compatible = "ti,dra7-atl";
+        reg = <0x4843c000 0x3ff>;
+        clocks = <&atl_gfclk_mux>;
+        clock-names = "fck";
+        ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
+                             <&atl_clkin2_ck>, <&atl_clkin3_ck>;
+
+        atl2 {
+            bws = <DRA7_ATL_WS_MCASP2_FSX>;
+            aws = <DRA7_ATL_WS_MCASP3_FSX>;
+        };
+    };

-- 
2.55.0

Re: [PATCH 1/2] dt-bindings: clock: ti,dra7-atl-clock: convert to DT schema

[Rob Herring (Arm)]

On Thu, 13 Aug 2026 00:41:17 +0530, Bhargav Joshi wrote:
> Convert the clock output portion of the DRA7 ATL (Audio Tracking Logic)
> binding from text to DT schema. property clock-output-names is added
> that is used by existing dts/dtsi.
> 
> Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
> ---
>  .../devicetree/bindings/clock/ti/dra7-atl.txt      | 38 ----------------------
>  .../bindings/clock/ti/ti,dra7-atl-clock.yaml       | 38 ++++++++++++++++++++++
>  2 files changed, 38 insertions(+), 38 deletions(-)
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

Re: [PATCH 2/2] dt-bindings: clock: ti,dra7-atl: convert to dt-schema

[Rob Herring]

On Thu, Aug 13, 2026 at 12:41:18AM +0530, Bhargav Joshi wrote:
> Convert the IP driver portion of the DRA7 ATL (Audio Tracking Logic)
> binding from the freeform text binding to dt-schema. Together with
> ti,dra7-atl-clock.yaml this fully replaces dra7-atl.txt.
> 
> ti,hwmods is marked deprecated as modern DTS uses ti,sysc target-module
> wrappers and the property is absent from current dra7-l4.dtsi.
> 
> bws/aws maximum set to 15 per the 16 mux sources in
> dt-bindings/clock/ti-dra7-atl.h.
> 
> Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
> ---
>  .../devicetree/bindings/clock/ti/dra7-atl.txt      | 56 -------------
>  .../devicetree/bindings/clock/ti/ti,dra7-atl.yaml  | 98 ++++++++++++++++++++++
>  2 files changed, 98 insertions(+), 56 deletions(-)


> diff --git a/Documentation/devicetree/bindings/clock/ti/ti,dra7-atl.yaml b/Documentation/devicetree/bindings/clock/ti/ti,dra7-atl.yaml
> new file mode 100644
> index 000000000000..5460432219a5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ti/ti,dra7-atl.yaml
> @@ -0,0 +1,98 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/ti/ti,dra7-atl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI DRA7 ATL (Audio Tracking Logic) Clock Controller
> +
> +maintainers:
> +  - Peter Ujfalusi <peter.ujfalusi@ti.com>
> +
> +description:
> +  The ATL IP is used to generate clock to be used to synchronize baseband and
> +  audio codec. A single ATL IP provides four ATL clock instances sharing the
> +  same functional clock but can be configured to provide different clocks.
> +  ATL can maintain a clock averages to some desired frequency based on the
> +  bws/aws signals - can compensate the drift between the two ws signal.
> +
> +  See also Documentation/devicetree/bindings/clock/ti/ti,dra7-atl-clock.yaml
> +
> +properties:
> +  compatible:
> +    const: ti,dra7-atl
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: fck
> +
> +  ti,provided-clocks:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    minItems: 4
> +    maxItems: 4

As the phandles have no arg cells:

       items:
         maxItems: 1

With that,

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>