[PATCH 0/2] Add support for IPQ9650 USB controller

[PATCH 0/2] Add support for IPQ9650 USB controller

[Varadarajan Narayanan]

Add bindings and dwc3-qcom glue driver changes for adding support to the
two USB controllers present in IPQ9650.

Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
---
Varadarajan Narayanan (2):
      dt-bindings: usb: qcom,snps-dwc3: Add IPQ9650 compatible
      usb: dwc3: qcom: Allow the glue layer to pass ref_clk to the core

 .../devicetree/bindings/usb/qcom,snps-dwc3.yaml    | 22 ++++++++++++++++++++++
 drivers/usb/dwc3/dwc3-qcom.c                       |  7 +++++++
 2 files changed, 29 insertions(+)
---
base-commit: 7c5f62582256b505a57975d1a8faa501c8d8878e
change-id: 20260820-ctrl-6015e1503b24

Best regards,
-- 
Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>

[PATCH 1/2] dt-bindings: usb: qcom,snps-dwc3: Add IPQ9650 compatible

[Varadarajan Narayanan]

Add the qcom,ipq9650-dwc3 compatible for the two DWC3 USB controllers found
on IPQ9650, using qcom,snps-dwc3 as the fallback compatible.

One controller is connected to a High-Speed PHY, while the other is
connected to both High-Speed and SuperSpeed PHYs.

Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
---
 .../devicetree/bindings/usb/qcom,snps-dwc3.yaml    | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
index ea60f7220afe..603d509a6ba1 100644
--- a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
@@ -36,6 +36,7 @@ properties:
           - qcom,ipq8064-dwc3
           - qcom,ipq8074-dwc3
           - qcom,ipq9574-dwc3
+          - qcom,ipq9650-dwc3
           - qcom,kaanapali-dwc3
           - qcom,maili-dwc3
           - qcom,milos-dwc3
@@ -387,6 +388,26 @@ allOf:
             - const: mock_utmi
             - const: xo
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq9650-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+            - const: ref_clk
+
   - if:
       properties:
         compatible:
@@ -506,6 +527,7 @@ allOf:
               - qcom,ipq5210-dwc3
               - qcom,ipq5424-dwc3
               - qcom,ipq9574-dwc3
+              - qcom,ipq9650-dwc3
     then:
       properties:
         interrupts:

-- 
2.34.1

[PATCH 2/2] usb: dwc3: qcom: Allow the glue layer to pass ref_clk to the core

[Varadarajan Narayanan]

The dwc3-qcom glue layer sets probe_data.ignore_clocks_and_resets before
calling dwc3_core_probe(), so the DWC3 core does not acquire ref_clk on its
own. This prevents dwc3_ref_clk_period() from programming GUCTL and GFLADJ
from the reference clock rate.

The deprecated snps,ref-clock-period-ns property is not a suitable
replacement on IPQ9650. Its 24 MHz reference clock has a period of about
41.66 ns, while using 41 ns makes the calculated FLADJ value become 0 and
leaves the reference clock configuration incorrect.

Allow the Qualcomm glue driver to provide ref_clk to the DWC3 core for
platforms that may need it.

Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
---
 drivers/usb/dwc3/dwc3-qcom.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index ac68b4218b56..2d6de6469c1e 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -705,6 +705,13 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	probe_data.res = &res;
 	probe_data.ignore_clocks_and_resets = true;
 	probe_data.properties = DWC3_DEFAULT_PROPERTIES;
+
+	qcom->dwc.ref_clk = devm_clk_get_optional(dev, "ref_clk");
+	if (IS_ERR_OR_NULL(qcom->dwc.ref_clk)) {
+		qcom->dwc.ref_clk = NULL;
+		dev_info(dev, "NOT setting dwc.ref_clk\n");
+	}
+
 	ret = dwc3_core_probe(&probe_data);
 	if (ret)  {
 		ret = dev_err_probe(dev, ret, "failed to register DWC3 Core\n");

-- 
2.34.1