[PATCH] riscv: defconfig: enable dwc3 and the SpacemiT K1 thermal sensor

[Bruno Banelli <bbanelli@gmail.com>]

Two blocks on SpacemiT K1 boards are unreachable from a stock defconfig
build:

 - USB_DWC3 is not enabled, so the dwc3 controller that drives all of
   the USB 3.0 ports on boards like the Milk-V Jupiter never probes.

 - SPACEMIT_K1_TSENSOR has no default in its Kconfig and is not listed
   here, so a K1 board comes up with no temperature readings at all,
   even though k1.dtsi describes five thermal zones.

Enable both.

Signed-off-by: Bruno Banelli <bbanelli@gmail.com>
---
 arch/riscv/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 04ae305d5..03d9ac2f7 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -209,6 +209,8 @@ CONFIG_USB=y
 CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_PLATFORM=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC_PLAT=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
@@ -260,6 +262,7 @@ CONFIG_CLK_SOPHGO_SG2042_PLL=y
 CONFIG_CLK_SOPHGO_SG2042_CLKGEN=y
 CONFIG_CLK_SOPHGO_SG2042_RPGATE=y
 CONFIG_SPACEMIT_K1_CCU=y
+CONFIG_SPACEMIT_K1_TSENSOR=y
 CONFIG_SPACEMIT_K3_CCU=y
 CONFIG_SUN8I_DE2_CCU=m
 CONFIG_SUN50I_IOMMU=y

base-commit: 66498c75b4f8017f62d720d9b59675bdf3abce91
-- 
2.43.0