The Linux Kernel Mailing List
 help / color / mirror / Atom feed
* [PATCH v2 0/5] btrfs: zoned: RAID1 block groups with missing or stale stripes
@ 2026-11-21 13:45 Miroslav Cimerman
  2026-11-21 13:45 ` [PATCH v2 1/5] btrfs: zoned: take the RAID1 active state from the first present stripe Miroslav Cimerman
                   ` (4 more replies)
  0 siblings, 5 replies; 6+ messages in thread
From: Miroslav Cimerman @ 2026-11-21 13:45 UTC (permalink / raw)
  To: linux-btrfs
  Cc: David Sterba, Chris Mason, Naohiro Aota, Johannes Thumshirn,
	Qu Wenruo, linux-kernel

btrfs_load_block_group_raid1() compares the active state and the write
pointer of each present stripe with stripe 0's, and takes the zone
capacity from stripes 0 and 1. But stripe 0 can be missing, any stripe
can be behind the others on a degraded mount, and the full zones of a
block group can report different capacities.

- 1/5 compares the active state with the first present stripe. With
  stripe 0 missing, such block groups were left off the active list, and
  writes to them could hang.
- 2/5 takes the zone capacity from all present stripes. RAID1C3 and
  RAID1C4 block groups failed to load with stripes 0 and 1 missing, once
  they held data, and were written past a smaller third or fourth stripe.
- 3/5 takes a full zone with more capacity than the block group as
  written up to the block group's capacity, unless an extent ends past
  it. Before, a regular mount failed on such block groups.
- 4/5 allocates from the highest write pointer on degraded mounts.
  Stripe 0's can be behind, and new extents then went over committed
  ones. It also lets a regular mount load a block group whose stripe 0
  is on an offline or read-only zone.
- 5/5 adds self-test cases.

v2:
- 2/5: was 3/4, moved before 3/5, which needs the block group's
  capacity. It takes the capacity from all present stripes now
- 3/5: new. v1 failed a degraded mount with all devices present and full
  zones of different capacities, which loaded before when stripe 0 had
  the smallest one (found in an LLM review). Zones with an extent past
  the capacity are not capped
- 4/5 (was 2/4): mark a metadata block group with a mismatch active if
  any of its zones is. With an empty first zone, it stayed inactive and
  warned at its next write (reported by Sashiko)
- 5/5: add cases with an empty first zone, with different zone
  capacities and with a failed zone report, and a capacity per stripe.
  Renamed, as 6 of the 14 new cases are on a regular mount
- rebased on for-next 184fa2c40f5c

v1: https://lore.kernel.org/linux-btrfs/20261119213835.103131-1-mc@raidlab.org/

Miroslav Cimerman (5):
  btrfs: zoned: take the RAID1 active state from the first present
    stripe
  btrfs: zoned: take the RAID1 zone capacity from all present stripes
  btrfs: zoned: cap full RAID1 zones at the block group's capacity
  btrfs: zoned: use the highest RAID1 write pointer on degraded mounts
  btrfs: tests: zoned: add RAID1 cases with missing or stale stripes

 fs/btrfs/tests/zoned-tests.c | 203 ++++++++++++++++++++++++++++++++++-
 fs/btrfs/zoned.c             | 102 +++++++++++++++---
 2 files changed, 291 insertions(+), 14 deletions(-)


base-commit: 184fa2c40f5c50afb1d8bf900eafadf450db392e
-- 
2.53.0


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2026-11-21 13:46 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-21 13:45 [PATCH v2 0/5] btrfs: zoned: RAID1 block groups with missing or stale stripes Miroslav Cimerman
2026-11-21 13:45 ` [PATCH v2 1/5] btrfs: zoned: take the RAID1 active state from the first present stripe Miroslav Cimerman
2026-11-21 13:45 ` [PATCH v2 2/5] btrfs: zoned: take the RAID1 zone capacity from all present stripes Miroslav Cimerman
2026-11-21 13:45 ` [PATCH v2 3/5] btrfs: zoned: cap full RAID1 zones at the block group's capacity Miroslav Cimerman
2026-11-21 13:45 ` [PATCH v2 4/5] btrfs: zoned: use the highest RAID1 write pointer on degraded mounts Miroslav Cimerman
2026-11-21 13:45 ` [PATCH v2 5/5] btrfs: tests: zoned: add RAID1 cases with missing or stale stripes Miroslav Cimerman

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox