Re: [PATCH 2/5] clk: qcom: add Global Clock controller (GCC) driver for IPQ9650 SoC

[Krzysztof Kozlowski <krzk@kernel.org>]

On 15/04/2026 15:33, Kathiravan Thirumoorthy wrote:
> Add support for the global clock controller found on IPQ9650 SoC.
> 
> Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
> ---
>  drivers/clk/qcom/Kconfig       |    8 +
>  drivers/clk/qcom/Makefile      |    1 +
>  drivers/clk/qcom/gcc-ipq9650.c | 3794 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 3803 insertions(+)
> 
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index df21ef5ffd68..ed4c5765557b 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -434,6 +434,14 @@ config IPQ_GCC_9574
>  	  i2c, USB, SD/eMMC, etc. Select this for the root clock
>  	  of ipq9574.
>  
> +config IPQ_GCC_9650
> +	tristate "IPQ9650 Global Clock Controller"

And the soc is for ARM64? Add proper dependency.

> +	help
> +	  Support for global clock controller on ipq9650 devices.
> +	  Say Y if you want to use peripheral devices such as UART, SPI,
> +	  i2c, USB, SD/eMMC, etc. Select this for the root clock
> +	  of ipq9650.
> +
Best regards,
Krzysztof