Re: [PATCH] arm64: dts: qcom: sm8550: Update EAS properties

[Lukasz Luba <lukasz.luba@arm.com>]

On 1/29/26 11:23, Konrad Dybcio wrote:
> On 1/29/26 12:05 PM, Viresh Kumar wrote:
>> On 29-01-26, 12:00, Konrad Dybcio wrote:
>>> On 1/28/26 8:11 PM, Aaron Kling via B4 Relay wrote:
>>>> It should be noted that the A715 cores seem less efficient than the
>>>> A710 cores. Therefore, an average value has been assigned to them,
>>>> considering that the A715 and A710 cores share a single cpufreq
>>>> domain.
>>>
>>> Regarding the CPUFreq domain shared across cores with different power
>>> characteristics, I think we shouldn't be lying to the OS, rather Linux
>>> should be able to deal with it, somehow.
>>
>> cpufreq-domain == cpufreq-policy here I guess. All CPUs that change
>> their DVFS state together should be part of one policy. Not sure if
>> there is something else you were pointing at.
> 
> Yes, they change their state together.
> 
> The question is whether it's okay for these CPUs to have different
> dynamic-power-coefficient values, and whether the EM code won't be
> thrown off by that.

The Energy Model won't support that, since it's a single
instance per-cpufreq-policy and we have to pick 'some' values (in this
case).

> 
> Again, they differ because within that shared policy, there's 2
> separate kinds of cores (2x Cortex-A715 + 2x Cortex-A710).
> 

For this SoC I assume the physical HW (power rail and frequency domain)
is linked to those 4 CPUs. That's quite novel configuration...

Maybe I could give you some hint at least for the EAS part (the EM
for EAS), because for something in other areas (e.g. thermal) might
be really tough.

What are the other CPUs in that SoC and their DVFS configs?

Regards,
Lukasz