* [BUG] IDE error in (un)stable trees
@ 2002-06-27 19:28 Diego Calleja
2002-06-28 9:33 ` Roy Sigurd Karlsbakk
2002-06-28 10:20 ` Lionel Bouton
0 siblings, 2 replies; 5+ messages in thread
From: Diego Calleja @ 2002-06-27 19:28 UTC (permalink / raw)
To: linux-kernel; +Cc: martin, Lionel.Bouton
[-- Attachment #1: Type: text/plain, Size: 8068 bytes --]
I get this error message when I run hdparm -Y /dev/hda, And after this,
I try to access some mounted partition:
System is a cyrix 6x86MX 200Mhz with a Microstar 5146, wich has a Sis
5513 ide chipset Kernel is a 2.4.19-rc1, but is reporducible in the last
-ac tree. So I think it may be related to my IDE chipset.
(NOTE: After the kernel prints the bug, in 2.4.19-rc1 and
2.4.19-pre8-ac3 the drive starts again, but system doesn't seems to work
with the mounted partition of the slept drive, 2.5 doesn't work neither
starts the drive...)
Perhaps this hdparm config is bad and I need to change it?:
/sbin/hdparm -c1 -A1 -a8 -d1 -m16 -p4 -u1 -W1 -X34 /dev/hda
hdparm -I /dev/hda reports:
non-removable ATA device, with non-removable media
Model Number: ST32122A
Serial Number: GJQ18658
Firmware Revision: 0.42
Standards:
Supported: 1 2
Likely used: 4
Configuration:
Logical max current
cylinders 4092 4092
heads 16 16
sectors/track 63 63
bytes/track: 0 (obsolete)
bytes/sector: 0 (obsolete)
current sector capacity: 4124736
LBA user addressable sectors = 4124736
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 128.0kB ECC bytes: 4 Queue depth: 1
Standby timer values: spec'd by Vendor
r/w multiple sector transfer: Max = 16 Current = 16
DMA: mdma0 mdma1 *mdma2 udma0 udma1 udma2
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=383ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
Power Management feature set
SMART feature set
Outputs:
In 2.4.19-rc1:
Jun 26 13:33:58 localhost kernel: hda: timeout waiting for DMA
Jun 26 13:33:58 localhost kernel: hda: ide_dma_timeout: Lets do it
again!stat = 0xd0, dma_stat = 0x20 Jun 26 13:33:58 localhost kernel:
hda: DMA disabled Jun 26 13:33:58 localhost kernel: hda:
ide_set_handler: handler not null; old=c0193690, new=c0198744 Jun 26
13:33:58 localhost kernel: bug: kernel timer added twice at c0193511.
In 2.4.19-pre8-ac3:
Jun 27 15:38:12 localhost kernel: hda: timeout waiting for DMA
Jun 27 15:38:12 localhost kernel: hda: ide_dma_timeout: Lets do it
again!stat = 0xd0, dma_stat = 0x20 Jun 27 15:38:12 localhost kernel:
hda: DMA disabled Jun 27 15:38:12 localhost kernel: hda:
ide_set_handler: handler not null; old=c0197a40, new=c0195234 Jun 27
15:38:12 localhost kernel: bug: kernel timer added twice at c01978b1.
Jun 27 15:38:12 localhost kernel: hda: ide_set_handler: handler not
null; old=c0195234, new=c01952a0 Jun 27 15:38:12 localhost kernel: bug:
kernel timer added twice at c01978b1.
In 2.5.19 (I'll test newer kernels...if they work)
Jun 27 15:42:52 localhost kernel: ATA: UDMA timeout occured hda!
Jun 27 15:42:52 localhost kernel: hda: status timeout: status=0xd0 {
Busy DriveReady SeekComplete } Jun 27 15:42:52 localhost kernel: hda:
drive not ready for command Jun 27 15:42:52 localhost kernel: hda:
status timeout: status=0xd0 { Busy DriveReady SeekComplete } Jun 27
15:42:52 localhost kernel: hda: drive not ready for command Jun 27
15:42:52 localhost kernel: hda: status timeout: status=0xd0 { Busy
DriveReady SeekComplete } Jun 27 15:42:52 localhost kernel: end_request:
I/O error, dev 03:00, sector 56111 Jun 27 15:42:52 localhost kernel:
Buffer I/O error on device ide0(3,1), logical block 7006 Jun 27 15:42:52
localhost kernel: hda: drive not ready for command Jun 27 15:42:52
localhost kernel: hda: status timeout: status=0xd0 { Busy DriveReady
SeekComplete } Jun 27 15:42:52 localhost kernel: hda: drive not ready
for command Jun 27 15:42:52 localhost kernel: hda: status timeout:
status=0xd0 { Busy DriveReady SeekComplete } Jun 27 15:42:54 localhost
kernel: hda: drive not ready for command Jun 27 15:42:54 localhost
kernel: hda: status timeout: status=0xd0 { Busy DriveReady SeekComplete
} Jun 27 15:42:54 localhost kernel: end_request: I/O error, dev 03:00,
sector 56119 Jun 27 15:42:54 localhost kernel: Buffer I/O error on
device ide0(3,1), logical block 7007 Jun 27 15:42:54 localhost kernel:
hda: drive not ready for command Jun 27 15:42:54 localhost kernel: hda:
status timeout: status=0xd0 { Busy DriveReady SeekComplete } Jun 27
15:42:54 localhost kernel: hda: drive not ready for command Jun 27
15:42:54 localhost kernel: hda: status timeout: status=0xd0 { Busy
DriveReady SeekComplete } Jun 27 15:42:54 localhost kernel: hda: drive
not ready for command Jun 27 15:42:54 localhost kernel: hda: status
timeout: status=0xd0 { Busy DriveReady SeekComplete } Jun 27 15:42:54
localhost kernel: end_request: I/O error, dev 03:00, sector 56127 Jun 27
15:42:56 localhost kernel: Buffer I/O error on device ide0(3,1), logical
block 7008 Jun 27 15:42:56 localhost kernel: hda: drive not ready for
command Jun 27 15:42:56 localhost kernel: journal-601, buffer write
failed Jun 27 15:42:56 localhost kernel: kernel BUG at prints.c:336!
Jun 27 15:42:56 localhost kernel: invalid operand: 0000
Jun 27 15:42:56 localhost kernel: CPU: 0
Jun 27 15:42:56 localhost kernel: EIP: 0010:[reiserfs_panic+41/80]
Not tainted Jun 27 15:42:56 localhost kernel: EFLAGS: 00010282
Jun 27 15:42:56 localhost kernel: eax: 00000024 ebx: c023a880 ecx:
ffffffdc edx: 00000001 Jun 27 15:42:56 localhost kernel: esi: c1e0ec00
edi: 00000000 ebp: c1e3c7c0 esp: c1ffde7c Jun 27 15:42:56
localhost kernel: ds: 0018 es: 0018 ss: 0018 Jun 27 15:42:56
localhost kernel: Process pdflush (pid: 6, threadinfo=c1ffc000
task=c1ffa060) Jun 27 15:42:56 localhost kernel: Stack: c0238a0e
c02ca760 c023a880 c1ffdea0 c1e0ec00 c28bb134 c0171189 c1e0ec00 Jun 27
15:42:56 localhost kernel: c023a880 c1e0ec00 00000001 c1e0ec00
00000000 c28bb0b4 c159a000 c1e3c7c0 Jun 27 15:42:56 localhost kernel:
c28bb168 c28bb15c 00000004 00000000 c06c98a0 c0175386 c1e0ec00
c28bb134 Jun 27 15:42:56 localhost kernel: Call Trace:
[flush_commit_list+821/1092] [do_journal_end+2102/2940]
[flush_old_commits+343/368] [rJun 27 15:42:57 localhost kernel:
[wb_kupdate+9/128] [schedule+579/696] [__pdflush+276/440]
[pdflush+11/20] [wb_kupdate+0/128] [kJun 27 15:42:57 localhost kernel:
Jun 27 15:42:57 localhost kernel: Code: 0f 0b 50 01 14 8a 23 c0 68 60 a7
2c c0 b8 1d 8a 23 c0 85 f6 Jun 27 15:42:57 localhost kernel: <6>note:
pdflush[6] exited with preempt_count 1
Message from syslogd@localhost at Thu Jun 27 15:42:56 2002 ...
localhost kernel: journal-601, buffer write failed
This is the output of lspci:
Root@diego:~# lspci -v
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 5571 (rev 01)
Flags: bus master, medium devsel, latency 255
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev
01) Flags: bus master, medium devsel, latency 0
00:01.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev
c1) (prog-if 8a [Master SecP PriP]) Subsystem: Unknown device
0040:0000 Flags: bus master, fast devsel, latency 32, IRQ 14
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at 1000 [size=16]
00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev e0)
(prog-if 10 [OHCI]) Flags: bus master, medium devsel, latency 32,
IRQ 10 Memory at e4000000 (32-bit, non-prefetchable) [size=4K]
00:0f.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev
01) (prog-if 00 [VGA]) Subsystem: 3Dfx Interactive, Inc.: Unknown
device 0057 Flags: fast devsel, IRQ 11
Memory at e0000000 (32-bit, non-prefetchable) [size=32M]
Memory at e2000000 (32-bit, prefetchable) [size=32M]
I/O ports at 6000 [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
root@diego:~#
and .config is attached.
Diego Calleja
[-- Attachment #2: .config --]
[-- Type: application/octet-stream, Size: 22693 bytes --]
#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_X86=y
CONFIG_ISA=y
# CONFIG_SBUS is not set
CONFIG_UID16=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_USE_STRING_486=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_MCE=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=m
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_HIGHMEM is not set
CONFIG_1GB=y
# CONFIG_2GB is not set
# CONFIG_3GB is not set
# CONFIG_05GB is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_SMP is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_UP_IOAPIC is not set
#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_MAX_USER_RT_PRIO=100
CONFIG_MAX_RT_PRIO=0
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_PM=y
# CONFIG_ACPI is not set
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play configuration
#
CONFIG_PNP=y
CONFIG_ISAPNP=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_TUX is not set
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
# CONFIG_PHONE_IXJ_PCMCIA is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_PCI_WIP=y
CONFIG_BLK_DEV_IDEDMA_TIMEOUT=y
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_AMD74XX_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CMD680 is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_PIIX_TUNING is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
#
# SCSI support
#
# CONFIG_SCSI is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
CONFIG_INPUT=m
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=y
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_INPUT_NS558 is not set
# CONFIG_INPUT_LIGHTNING is not set
# CONFIG_INPUT_PCIGAME is not set
# CONFIG_INPUT_CS461X is not set
# CONFIG_INPUT_EMU10K1 is not set
# CONFIG_INPUT_SERIO is not set
# CONFIG_INPUT_SERPORT is not set
# CONFIG_INPUT_ANALOG is not set
# CONFIG_INPUT_A3D is not set
# CONFIG_INPUT_ADI is not set
# CONFIG_INPUT_COBRA is not set
# CONFIG_INPUT_GF2K is not set
# CONFIG_INPUT_GRIP is not set
# CONFIG_INPUT_INTERACT is not set
# CONFIG_INPUT_TMDC is not set
# CONFIG_INPUT_SIDEWINDER is not set
# CONFIG_INPUT_IFORCE_USB is not set
# CONFIG_INPUT_IFORCE_232 is not set
# CONFIG_INPUT_WARRIOR is not set
# CONFIG_INPUT_MAGELLAN is not set
# CONFIG_INPUT_SPACEORB is not set
# CONFIG_INPUT_SPACEBALL is not set
# CONFIG_INPUT_STINGER is not set
# CONFIG_INPUT_DB9 is not set
# CONFIG_INPUT_GAMECON is not set
# CONFIG_INPUT_TURBOGRAFX is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_AMD_RNG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
CONFIG_DRM=y
# CONFIG_DRM_OLD is not set
CONFIG_DRM_NEW=y
CONFIG_DRM_TDFX=m
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y
# CONFIG_I2C_PARPORT is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZORAN_BUZ is not set
# CONFIG_VIDEO_ZORAN_DC10 is not set
# CONFIG_VIDEO_ZORAN_LML33 is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_MEYE is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_MIROPCM20 is not set
# CONFIG_RADIO_MIROPCM20_RDS is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_TMPFS is not set
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_EXT2_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_FS is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
# CONFIG_SUNRPC is not set
# CONFIG_LOCKD is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_ZISOFS_FS=m
CONFIG_ZLIB_FS_INFLATE=m
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_VESA=y
CONFIG_FB_VGA16=m
# CONFIG_FB_HGA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_3DFX=m
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FBCON_SPLASHSCREEN is not set
# CONFIG_FBCON_ADVANCED is not set
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
CONFIG_FBCON_VGA_PLANES=m
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Sound
#
CONFIG_SOUND=m
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_MIDI_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_MIDI_VIA82CXXX is not set
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_ADLIB is not set
# CONFIG_SOUND_ACI_MIXER is not set
# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_GUS is not set
CONFIG_SOUND_VMIDI=m
# CONFIG_SOUND_TRIX is not set
CONFIG_SOUND_MSS=m
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_PAS_JOYSTICK is not set
# CONFIG_SOUND_PSS is not set
CONFIG_SOUND_SB=m
# CONFIG_SOUND_AWE32_SYNTH is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_MAUI is not set
CONFIG_SOUND_YM3812=m
# CONFIG_SOUND_OPL3SA1 is not set
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_YMFPCI is not set
# CONFIG_SOUND_YMFPCI_LEGACY is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_TVMIXER is not set
#
# USB support
#
CONFIG_USB=m
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_LONG_TIMEOUT is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
CONFIG_USB_OHCI=m
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_HID is not set
# CONFIG_USB_HIDINPUT is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_BRLVGER is not set
#
# Bluetooth support
#
# CONFIG_BLUEZ is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_FRAME_POINTER is not set
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [BUG] IDE error in (un)stable trees
2002-06-27 19:28 [BUG] IDE error in (un)stable trees Diego Calleja
@ 2002-06-28 9:33 ` Roy Sigurd Karlsbakk
2002-06-28 10:20 ` Lionel Bouton
1 sibling, 0 replies; 5+ messages in thread
From: Roy Sigurd Karlsbakk @ 2002-06-28 9:33 UTC (permalink / raw)
To: Diego Calleja, linux-kernel; +Cc: martin, Lionel.Bouton
On Thursday 27 June 2002 21:28, Diego Calleja wrote:
> I get this error message when I run hdparm -Y /dev/hda, And after this,
> I try to access some mounted partition:
<snip/>
from the hdparm manual
-Y Force an IDE drive to immediately enter the lowest power consumption
sleep mode, causing it to shut down completely. A hard or soft reset is
required before the drive can be accessed again (the Linux IDE driver
will automatically handle issuing a reset if/when needed). The current
power mode status can be checked using the -C flag.
so - you need a hard or soft reset to go on ...
roy
--
Roy Sigurd Karlsbakk, Datavaktmester
Computers are like air conditioners.
They stop working when you open Windows.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [BUG] IDE error in (un)stable trees
2002-06-27 19:28 [BUG] IDE error in (un)stable trees Diego Calleja
2002-06-28 9:33 ` Roy Sigurd Karlsbakk
@ 2002-06-28 10:20 ` Lionel Bouton
2002-06-28 19:08 ` Diego Calleja
1 sibling, 1 reply; 5+ messages in thread
From: Lionel Bouton @ 2002-06-28 10:20 UTC (permalink / raw)
To: Diego Calleja; +Cc: linux-kernel, martin
Diego Calleja wrote:
>I get this error message when I run hdparm -Y /dev/hda, And after this,
>I try to access some mounted partition:
>
>System is a cyrix 6x86MX 200Mhz with a Microstar 5146, wich has a Sis
>5513 ide chipset Kernel is a 2.4.19-rc1, but is reporducible in the last
>-ac tree. So I think it may be related to my IDE chipset.
>
>(NOTE: After the kernel prints the bug, in 2.4.19-rc1 and
>2.4.19-pre8-ac3 the drive starts again, but system doesn't seems to work
>with the mounted partition of the slept drive, 2.5 doesn't work neither
>starts the drive...)
>
>
>
1/ SiS5571 is not in the lookup table used to find the chipset
capabilities. That shouldn't pose problem as from what I could gather
from the web this is a basic EIDE chipset (ATA16 support only) and every
unknown chipset is configured as an ATA16 capable chipset.
2/ timings might be messed up because of the FSB used (75MHz instead of
66MHz) on your configuration.
If you can, underclock your mainboard to 66MHz and see what happens. If
it solves your problem, then dynamically computing timings from the FSB
(in my TODO list but behind ATA133 support) will eventually solve your
problem. Until then you could modify the timings by hand (I could
provide you a patch for your specific configuration).
--
Lionel Bouton - inet6
---------------------------------------------------------------------
o Siege social: 51, rue de Verdun - 92158 Suresnes
/ _ __ _ Acces Bureaux: 33 rue Benoit Malon - 92150 Suresnes
/ /\ /_ / /_ France
\/ \/_ / /_/ Tel. +33 (0) 1 41 44 85 36
Inetsys S.A. Fax +33 (0) 1 46 97 20 10
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [BUG] IDE error in (un)stable trees
2002-06-28 10:20 ` Lionel Bouton
@ 2002-06-28 19:08 ` Diego Calleja
0 siblings, 0 replies; 5+ messages in thread
From: Diego Calleja @ 2002-06-28 19:08 UTC (permalink / raw)
To: Lionel Bouton; +Cc: linux-kernel, martin
On Fri, 28 Jun 2002 12:20:06 +0200
Lionel Bouton <Lionel.Bouton@inet6.fr> escribió:
> 2/ timings might be messed up because of the FSB used (75MHz instead
> of 66MHz) on your configuration.
>
> If you can, underclock your mainboard to 66MHz and see what happens.
> If it solves your problem, then dynamically computing timings from the
> FSB (in my TODO list but behind ATA133 support) will eventually solve
> your problem. Until then you could modify the timings by hand (I could
> provide you a patch for your specific configuration).
My mainboard supports 75 mhz of FSB, but strangely, the system can't
boot. The bios stops just before printing the message that says that a
cdrom has been detected. So I'm using 66 mhz FSB.
Diego Calleja
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [BUG] IDE error in (un)stable trees
[not found] ` <Pine.LNX.4.33.0207011837530.835-100000@coffee.psychology.mcmaster.ca>
@ 2002-07-01 22:56 ` Diego Calleja
0 siblings, 0 replies; 5+ messages in thread
From: Diego Calleja @ 2002-07-01 22:56 UTC (permalink / raw)
To: linux-kernel; +Cc: Mark Hahn, Lionel.Bouton
On Mon, 1 Jul 2002 18:44:26 -0400 (EDT)
Mark Hahn <hahn@physics.mcmaster.ca> escribió:
>
> that's a pretty odd device DID. is this a pretty old chipset?
> does lspci -vx show 0x1039:0x5513 as this device's vid:did?
> if so, it should really work with recent kernels, assuming they're
> compiled sanely. have you done the .config yourself, and if so,
> do you have CONFIG_BLK_DEV_SIS5513 and CONFIG_IDEDMA_PCI_AUTO:?
lspci -vx:
00:01.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev
c1) (prog-if 8a [Master SecP PriP]) Subsystem: Unknown device 0040:0000
Flags: bus master, fast devsel, latency 32, IRQ 14
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at 1000 [size=16]
00: 39 10 13 55 07 00 00 00 c1 8a 01 01 00 20 80 00
10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00
20: 01 10 00 00 00 00 00 00 00 00 00 00 40 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0e 01 00 00
CONFIG_BLK_DEV_SIS5513 and CONFIG_IDEDMA_PCI_AUTO are set.
I remember a thing, a message i get on every boot, now i realise why my
ide chipset doesn't work well:(I've cc-ed all people again so they can
read this)
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 4 of device 00:01.1
-->00:01.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
(rev c1) (prog-if 8a [Master SecP PriP])
I guess the matter is here? Where came this error from?
Diego Calleja
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2002-07-01 22:51 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-06-27 19:28 [BUG] IDE error in (un)stable trees Diego Calleja
2002-06-28 9:33 ` Roy Sigurd Karlsbakk
2002-06-28 10:20 ` Lionel Bouton
2002-06-28 19:08 ` Diego Calleja
[not found] <20020629155725.7557a45f.diegocg@teleline.es>
[not found] ` <Pine.LNX.4.33.0207011837530.835-100000@coffee.psychology.mcmaster.ca>
2002-07-01 22:56 ` Diego Calleja
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox