* [IDE bug] hdparm lockup
@ 2002-07-25 5:43 Andrew Morton
2002-07-25 7:38 ` Marcin Dalecki
2002-07-25 12:54 ` Andries Brouwer
0 siblings, 2 replies; 3+ messages in thread
From: Andrew Morton @ 2002-07-25 5:43 UTC (permalink / raw)
To: lkml
2.5.28, uniprocessor
00:0f.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
quad:/home/akpm> 0 hdparm -i /dev/hdc
/dev/hdc:
HDIO_GETGEO_BIG failed: Invalid argument
(what's this?)
Model=Maxtor 96147H6, FwRev=ZAH814Y0, SerialNo=V60JT12C
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=120064896
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 ATA-4 ATA-5 ATA-6
Kernel Drive Geometry LogicalCHS=7473/255/63
The command
hdparm -d1 -A1 -m16 -u1 -a64 /dev/hdc
freezes the machine.
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [IDE bug] hdparm lockup
2002-07-25 5:43 [IDE bug] hdparm lockup Andrew Morton
@ 2002-07-25 7:38 ` Marcin Dalecki
2002-07-25 12:54 ` Andries Brouwer
1 sibling, 0 replies; 3+ messages in thread
From: Marcin Dalecki @ 2002-07-25 7:38 UTC (permalink / raw)
To: Andrew Morton; +Cc: lkml
Andrew Morton wrote:
> 2.5.28, uniprocessor
>
> 00:0f.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
>
> quad:/home/akpm> 0 hdparm -i /dev/hdc
>
> /dev/hdc:
> HDIO_GETGEO_BIG failed: Invalid argument
> (what's this?)
Please don't call every bug out there IDE. Thanks.
Becouse this one is acutally most likely due to the ioctl() handling
changes between 27 and 28...
>
> Model=Maxtor 96147H6, FwRev=ZAH814Y0, SerialNo=V60JT12C
> Config={ Fixed }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
> CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=120064896
> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
> Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 ATA-4 ATA-5 ATA-6
> Kernel Drive Geometry LogicalCHS=7473/255/63
>
> The command
>
> hdparm -d1 -A1 -m16 -u1 -a64 /dev/hdc
Maybe indeed IDE or maybe as well the READA code or simple
related to the above error. I will recheck after I get 2.5.28 up and
running.
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [IDE bug] hdparm lockup
2002-07-25 5:43 [IDE bug] hdparm lockup Andrew Morton
2002-07-25 7:38 ` Marcin Dalecki
@ 2002-07-25 12:54 ` Andries Brouwer
1 sibling, 0 replies; 3+ messages in thread
From: Andries Brouwer @ 2002-07-25 12:54 UTC (permalink / raw)
To: Andrew Morton; +Cc: lkml
On Wed, Jul 24, 2002 at 10:43:46PM -0700, Andrew Morton wrote:
> quad:/home/akpm> 0 hdparm -i /dev/hdc
>
> /dev/hdc:
> HDIO_GETGEO_BIG failed: Invalid argument
> (what's this?)
Your hdparm uses an ioctl that doesnt exist (anymore).
Change to HDIO_GETGEO.
> The command
>
> hdparm -d1 -A1 -m16 -u1 -a64 /dev/hdc
>
> freezes the machine.
There I cannot help.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2002-07-25 12:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-07-25 5:43 [IDE bug] hdparm lockup Andrew Morton
2002-07-25 7:38 ` Marcin Dalecki
2002-07-25 12:54 ` Andries Brouwer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox