RE: 2.4.20-pre3 hangs on boot on Duron/VIA

RE: 2.4.20-pre3 hangs on boot on Duron/VIA

[Garst R. Reese]

> 2.4.20-pre3 hangs on boot on a Duron/VIA system, immediately after 
> displaying the line: 

 Initializing RT netlink socket 

Same thing on a ThinkPad 380XD mmx

RE: 2.4.20-pre3 hangs on boot on Duron/VIA

[Andrew Friedley]

I'm getting the same hang on a dual p2 xeon 450 2mb cache system.  Intel
C440GX+ motherboard.

Andrew Friedley

2.4.20-pre3 hangs on boot on Duron/VIA

[Jonathan Hudson]

2.4.20-pre3 hangs on boot on a Duron/VIA system, immediately after
displaying the line:

 Initializing RT netlink socket 

2.4.20-pre2 (and -ac3) boot normally

 PCI: Probing PCI hardware 
 Disabling VIA memory write queue (PCI ID 0305, rev 02): [55] 89 & 1f -> 09 
 Unknown bridge resource 0: assuming transparent 
 Linux NET4.0 for Linux 2.4 
 Based upon Swansea University Computer Society NET3.039 
 Initializing RT netlink socket 
 Starting kswapd 
 ACPI: Core Subsystem version [20011018] 
 ACPI: Subsystem enabled 
 matroxfb: Matrox G400 (AGP) detected

Compiler was gcc 3.2. Further details on request if required.

Thanks

Re: 2.4.20-pre3 hangs on boot on Duron/VIA

[Alex Romosan]

Jonathan Hudson <jonathan@daria.co.uk> writes:

> 2.4.20-pre3 hangs on boot on a Duron/VIA system, immediately after
> displaying the line:
> 
>  Initializing RT netlink socket 
> 

same thing on an athlon/via system. kernel was compiled with gcc 2.95
2.4.20-pre2 boots fine.

--alex--

-- 
| I believe the moment is at hand when, by a paranoiac and active |
|  advance of the mind, it will be possible (simultaneously with  |
|  automatism and other passive states) to systematize confusion  |
|  and thus to help to discredit completely the world of reality. |