[PATCH v6 0/5] Add a few panels and use correct modes

[PATCH v6 0/5] Add a few panels and use correct modes

[Hsin-Yi Wang]

This series contains following patches:
1-2. Fix 2 panel naming and timing.
3. Add a few new generic edp panels.
4. Support a new quirk to override the mode read from edid
5. Only add hard-coded mode if both edid and hard-coded modes presents.

v1: https://patchwork.kernel.org/project/dri-devel/cover/20231101212604.1636517-1-hsinyi@chromium.org/
v2: https://patchwork.kernel.org/project/dri-devel/cover/20231102221309.1971910-1-hsinyi@chromium.org/
v3: https://patchwork.kernel.org/project/dri-devel/cover/20231106202718.2770821-1-hsinyi@chromium.org/
v4: https://patchwork.kernel.org/project/dri-devel/cover/20231106210337.2900034-1-hsinyi@chromium.org/
v5: https://patchwork.kernel.org/project/dri-devel/cover/20231107000023.2928195-1-hsinyi@chromium.org/

Hsin-Yi Wang (5):
  drm/panel-edp: drm/panel-edp: Fix AUO B116XAK01 name and timing
  drm/panel-edp: drm/panel-edp: Fix AUO B116XTN02 name
  drm/panel-edp: drm/panel-edp: Add several generic edp panels
  drm/panel-edp: Add override_edid_mode quirk for generic edp
  drm/panel-edp: Avoid adding multiple preferred modes

 drivers/gpu/drm/panel/panel-edp.c | 134 +++++++++++++++++++++++++++---
 1 file changed, 122 insertions(+), 12 deletions(-)

-- 
2.42.0.869.gea05f2083d-goog

[PATCH v6 1/5] drm/panel-edp: drm/panel-edp: Fix AUO B116XAK01 name and timing

[Hsin-Yi Wang]

Rename AUO 0x405c B116XAK01 to B116XAK01.0 and adjust the timing of
auo_b116xak01: T3=200, T12=500, T7_max = 50 according to decoding edid
and datasheet.

Fixes: da458286a5e2 ("drm/panel: Add support for AUO B116XAK01 panel")
Cc: stable@vger.kernel.org
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
v5->v6: split to 2 patches.
---
 drivers/gpu/drm/panel/panel-edp.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index 9dce4c702414..2fba7c1f49ce 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -973,6 +973,8 @@ static const struct panel_desc auo_b116xak01 = {
 	},
 	.delay = {
 		.hpd_absent = 200,
+		.unprepare = 500,
+		.enable = 50,
 	},
 };
 
@@ -1870,7 +1872,7 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x1e9b, &delay_200_500_e50, "B133UAN02.1"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x1ea5, &delay_200_500_e50, "B116XAK01.6"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x235c, &delay_200_500_e50, "B116XTN02"),
-	EDP_PANEL_ENTRY('A', 'U', 'O', 0x405c, &auo_b116xak01.delay, "B116XAK01"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x405c, &auo_b116xak01.delay, "B116XAK01.0"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x582d, &delay_200_500_e50, "B133UAN01.0"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x615c, &delay_200_500_e50, "B116XAN06.1"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x8594, &delay_200_500_e50, "B133UAN01.0"),
-- 
2.42.0.869.gea05f2083d-goog

Re: [PATCH v6 1/5] drm/panel-edp: drm/panel-edp: Fix AUO B116XAK01 name and timing

[Maxime Ripard]

On Tue, 7 Nov 2023 12:41:51 -0800, Hsin-Yi Wang wrote:
> Rename AUO 0x405c B116XAK01 to B116XAK01.0 and adjust the timing of
> auo_b116xak01: T3=200, T12=500, T7_max = 50 according to decoding edid
> and datasheet.
> 
> Fixes: da458286a5e2 ("drm/panel: Add support for AUO B116XAK01 panel")
> 
> [ ... ]

Acked-by: Maxime Ripard <mripard@kernel.org>

Thanks!
Maxime

Re: [PATCH v6 1/5] drm/panel-edp: drm/panel-edp: Fix AUO B116XAK01 name and timing

[Doug Anderson]

Hi,

On Tue, Nov 7, 2023 at 12:46 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> Rename AUO 0x405c B116XAK01 to B116XAK01.0 and adjust the timing of
> auo_b116xak01: T3=200, T12=500, T7_max = 50 according to decoding edid
> and datasheet.
>
> Fixes: da458286a5e2 ("drm/panel: Add support for AUO B116XAK01 panel")
> Cc: stable@vger.kernel.org
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
> v5->v6: split to 2 patches.
> ---
>  drivers/gpu/drm/panel/panel-edp.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)

Even though this is a fix, it's not super urgent since it'll cause
conflicts with other changes, so pushed to drm-misc-next rather than
drm-misc-fixes.

fc6e76792965 drm/panel-edp: drm/panel-edp: Fix AUO B116XAK01 name and timing

[PATCH v6 2/5] drm/panel-edp: drm/panel-edp: Fix AUO B116XTN02 name

[Hsin-Yi Wang]

Rename AUO 0x235c B116XTN02 to B116XTN02.3 according to decoding edid.

Fixes: 3db2420422a5 ("drm/panel-edp: Add AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49 V8.0")
Cc: stable@vger.kernel.org
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
v5->v6: split to 2 patches.
---
 drivers/gpu/drm/panel/panel-edp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index 2fba7c1f49ce..d41d205f7f5b 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -1871,7 +1871,7 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x145c, &delay_200_500_e50, "B116XAB01.4"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x1e9b, &delay_200_500_e50, "B133UAN02.1"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x1ea5, &delay_200_500_e50, "B116XAK01.6"),
-	EDP_PANEL_ENTRY('A', 'U', 'O', 0x235c, &delay_200_500_e50, "B116XTN02"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x235c, &delay_200_500_e50, "B116XTN02.3"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x405c, &auo_b116xak01.delay, "B116XAK01.0"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x582d, &delay_200_500_e50, "B133UAN01.0"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x615c, &delay_200_500_e50, "B116XAN06.1"),
-- 
2.42.0.869.gea05f2083d-goog

Re: [PATCH v6 2/5] drm/panel-edp: drm/panel-edp: Fix AUO B116XTN02 name

[Maxime Ripard]

On Tue, 7 Nov 2023 12:41:52 -0800, Hsin-Yi Wang wrote:
> Rename AUO 0x235c B116XTN02 to B116XTN02.3 according to decoding edid.
> 
> Fixes: 3db2420422a5 ("drm/panel-edp: Add AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49 V8.0")
> Cc: stable@vger.kernel.org
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> 
> [ ... ]

Acked-by: Maxime Ripard <mripard@kernel.org>

Thanks!
Maxime

Re: [PATCH v6 2/5] drm/panel-edp: drm/panel-edp: Fix AUO B116XTN02 name

[Doug Anderson]

Hi,

On Tue, Nov 7, 2023 at 12:46 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> Rename AUO 0x235c B116XTN02 to B116XTN02.3 according to decoding edid.
>
> Fixes: 3db2420422a5 ("drm/panel-edp: Add AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49 V8.0")
> Cc: stable@vger.kernel.org
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
> v5->v6: split to 2 patches.
> ---
>  drivers/gpu/drm/panel/panel-edp.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Even though this is a fix, it's not super urgent and since it'll cause
conflicts with other changes, so pushed to drm-misc-next rather than
drm-misc-fixes.

962845c090c4 drm/panel-edp: drm/panel-edp: Fix AUO B116XTN02 name

[PATCH v6 3/5] drm/panel-edp: drm/panel-edp: Add several generic edp panels

[Hsin-Yi Wang]

Add a few generic edp panels used by mt8186 chromebooks.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
no change.
---
 drivers/gpu/drm/panel/panel-edp.c | 51 +++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index d41d205f7f5b..599a949d74d1 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -1832,6 +1832,12 @@ static const struct panel_delay delay_200_500_e50 = {
 	.enable = 50,
 };
 
+static const struct panel_delay delay_200_500_e80 = {
+	.hpd_absent = 200,
+	.unprepare = 500,
+	.enable = 80,
+};
+
 static const struct panel_delay delay_200_500_e80_d50 = {
 	.hpd_absent = 200,
 	.unprepare = 500,
@@ -1851,6 +1857,19 @@ static const struct panel_delay delay_200_500_e200 = {
 	.enable = 200,
 };
 
+static const struct panel_delay delay_200_500_e200_d10 = {
+	.hpd_absent = 200,
+	.unprepare = 500,
+	.enable = 200,
+	.disable = 10,
+};
+
+static const struct panel_delay delay_200_150_e200 = {
+	.hpd_absent = 200,
+	.unprepare = 150,
+	.enable = 200,
+};
+
 #define EDP_PANEL_ENTRY(vend_chr_0, vend_chr_1, vend_chr_2, product_id, _delay, _name) \
 { \
 	.name = _name, \
@@ -1871,37 +1890,69 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x145c, &delay_200_500_e50, "B116XAB01.4"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x1e9b, &delay_200_500_e50, "B133UAN02.1"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x1ea5, &delay_200_500_e50, "B116XAK01.6"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x208d, &delay_200_500_e50, "B140HTN02.1"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x235c, &delay_200_500_e50, "B116XTN02.3"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x239b, &delay_200_500_e50, "B116XAN06.1"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x255c, &delay_200_500_e50, "B116XTN02.5"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x403d, &delay_200_500_e50, "B140HAN04.0"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x405c, &auo_b116xak01.delay, "B116XAK01.0"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x582d, &delay_200_500_e50, "B133UAN01.0"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x615c, &delay_200_500_e50, "B116XAN06.1"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x635c, &delay_200_500_e50, "B116XAN06.3"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x639c, &delay_200_500_e50, "B140HAK02.7"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x8594, &delay_200_500_e50, "B133UAN01.0"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0xf390, &delay_200_500_e50, "B140XTN07.7"),
 
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0715, &delay_200_150_e200, "NT116WHM-N21"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0731, &delay_200_500_e80, "NT116WHM-N42"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0741, &delay_200_500_e200, "NT116WHM-N44"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0786, &delay_200_500_p2e80, "NV116WHM-T01"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x07d1, &boe_nv133fhm_n61.delay, "NV133FHM-N61"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x07f6, &delay_200_500_e200, "NT140FHM-N44"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x082d, &boe_nv133fhm_n61.delay, "NV133FHM-N62"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x08b2, &delay_200_500_e200, "NT140WHM-N49"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x09c3, &delay_200_500_e50, "NT116WHM-N21,836X2"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x094b, &delay_200_500_e50, "NT116WHM-N21"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0951, &delay_200_500_e80, "NV116WHM-N47"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x095f, &delay_200_500_e50, "NE135FBM-N41 v8.1"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0979, &delay_200_500_e50, "NV116WHM-N49 V8.0"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x098d, &boe_nv110wtm_n61.delay, "NV110WTM-N61"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x09ae, &delay_200_500_e200, "NT140FHM-N45"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x09dd, &delay_200_500_e50, "NT116WHM-N21"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0a5d, &delay_200_500_e50, "NV116WHM-N45"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0ac5, &delay_200_500_e50, "NV116WHM-N4C"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0b43, &delay_200_500_e200, "NV140FHM-T09"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0b56, &delay_200_500_e80, "NT140FHM-N47"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0c20, &delay_200_500_e80, "NT140FHM-N47"),
 
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1132, &delay_200_500_e80_d50, "N116BGE-EA2"),
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1138, &innolux_n116bca_ea1.delay, "N116BCA-EA1-RC4"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1139, &delay_200_500_e80_d50, "N116BGE-EA2"),
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1145, &delay_200_500_e80_d50, "N116BCN-EB1"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x114c, &innolux_n116bca_ea1.delay, "N116BCA-EA1"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1152, &delay_200_500_e80_d50, "N116BCN-EA1"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1153, &delay_200_500_e80_d50, "N116BGE-EA2"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1154, &delay_200_500_e80_d50, "N116BCA-EA2"),
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1157, &delay_200_500_e80_d50, "N116BGE-EA2"),
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x115b, &delay_200_500_e80_d50, "N116BCN-EB1"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1247, &delay_200_500_e80_d50, "N120ACA-EA1"),
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x142b, &delay_200_500_e80_d50, "N140HCA-EAC"),
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x144f, &delay_200_500_e80_d50, "N140HGA-EA1"),
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1468, &delay_200_500_e80, "N140HGA-EA1"),
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x14e5, &delay_200_500_e80_d50, "N140HGA-EA1"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x14d4, &delay_200_500_e80_d50, "N140HCA-EAC"),
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x14d6, &delay_200_500_e80_d50, "N140BGA-EA4"),
+
+	EDP_PANEL_ENTRY('H', 'K', 'C', 0x2d5c, &delay_200_500_e200, "MB116AN01-2"),
 
+	EDP_PANEL_ENTRY('I', 'V', 'O', 0x048e, &delay_200_500_e200_d10, "M116NWR6 R5"),
 	EDP_PANEL_ENTRY('I', 'V', 'O', 0x057d, &delay_200_500_e200, "R140NWF5 RH"),
 	EDP_PANEL_ENTRY('I', 'V', 'O', 0x854a, &delay_200_500_p2e100, "M133NW4J"),
 	EDP_PANEL_ENTRY('I', 'V', 'O', 0x854b, &delay_200_500_p2e100, "R133NW4K-R0"),
+	EDP_PANEL_ENTRY('I', 'V', 'O', 0x8c4d, &delay_200_150_e200, "R140NWFM R1"),
 
 	EDP_PANEL_ENTRY('K', 'D', 'B', 0x0624, &kingdisplay_kd116n21_30nv_a010.delay, "116N21-30NV-A010"),
+	EDP_PANEL_ENTRY('K', 'D', 'C', 0x0809, &delay_200_500_e50, "KD116N2930A15"),
 	EDP_PANEL_ENTRY('K', 'D', 'B', 0x1120, &delay_200_500_e80_d50, "116N29-30NK-C007"),
 
 	EDP_PANEL_ENTRY('S', 'H', 'P', 0x1511, &delay_200_500_e50, "LQ140M1JW48"),
-- 
2.42.0.869.gea05f2083d-goog

Re: [PATCH v6 3/5] drm/panel-edp: drm/panel-edp: Add several generic edp panels

[Greg KH]

On Tue, Nov 07, 2023 at 12:41:53PM -0800, Hsin-Yi Wang wrote:
> Add a few generic edp panels used by mt8186 chromebooks.
> 
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
> no change.
> ---
>  drivers/gpu/drm/panel/panel-edp.c | 51 +++++++++++++++++++++++++++++++
>  1 file changed, 51 insertions(+)

<formletter>

This is not the correct way to submit patches for inclusion in the
stable kernel tree.  Please read:
    https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.

</formletter>

Re: [PATCH v6 3/5] drm/panel-edp: drm/panel-edp: Add several generic edp panels

[Hsin-Yi Wang]

On Tue, Nov 7, 2023 at 12:57 PM Greg KH <gregkh@linuxfoundation.org> wrote:
>
> On Tue, Nov 07, 2023 at 12:41:53PM -0800, Hsin-Yi Wang wrote:
> > Add a few generic edp panels used by mt8186 chromebooks.
> >
> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> > Reviewed-by: Douglas Anderson <dianders@chromium.org>
> > ---
> > no change.
> > ---
> >  drivers/gpu/drm/panel/panel-edp.c | 51 +++++++++++++++++++++++++++++++
> >  1 file changed, 51 insertions(+)
>
> <formletter>
>
> This is not the correct way to submit patches for inclusion in the
> stable kernel tree.  Please read:
>     https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
> for how to do this properly.
>
Sorry for confusion, only patch 1 & 2 need to be picked to stable. 3~5 don't.

> </formletter>

Re: [PATCH v6 3/5] drm/panel-edp: drm/panel-edp: Add several generic edp panels

[Maxime Ripard]

On Tue, 7 Nov 2023 12:41:53 -0800, Hsin-Yi Wang wrote:
> Add a few generic edp panels used by mt8186 chromebooks.
> 
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>

Acked-by: Maxime Ripard <mripard@kernel.org>

Thanks!
Maxime

Re: [PATCH v6 3/5] drm/panel-edp: drm/panel-edp: Add several generic edp panels

[Doug Anderson]

Hi,

On Tue, Nov 7, 2023 at 12:46 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> Add a few generic edp panels used by mt8186 chromebooks.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
> no change.
> ---
>  drivers/gpu/drm/panel/panel-edp.c | 51 +++++++++++++++++++++++++++++++
>  1 file changed, 51 insertions(+)

Pushed to drm-misc-next:

4d53cf814795 drm/panel-edp: drm/panel-edp: Add several generic edp panels

[PATCH v6 4/5] drm/panel-edp: Add override_edid_mode quirk for generic edp

[Hsin-Yi Wang]

Generic edp gets mode from edid. However, some panels report incorrect
mode in this way, resulting in glitches on panel. Introduce a new quirk
additional_mode to the generic edid to pick a correct hardcoded mode.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
no change.
---
 drivers/gpu/drm/panel/panel-edp.c | 67 ++++++++++++++++++++++++++++---
 1 file changed, 62 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index 599a949d74d1..c0c24d94c3a0 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -203,6 +203,9 @@ struct edp_panel_entry {
 
 	/** @name: Name of this panel (for printing to logs). */
 	const char *name;
+
+	/** @override_edid_mode: Override the mode obtained by edid. */
+	const struct drm_display_mode *override_edid_mode;
 };
 
 struct panel_edp {
@@ -301,6 +304,24 @@ static unsigned int panel_edp_get_display_modes(struct panel_edp *panel,
 	return num;
 }
 
+static int panel_edp_override_edid_mode(struct panel_edp *panel,
+					struct drm_connector *connector,
+					const struct drm_display_mode *override_mode)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, override_mode);
+	if (!mode) {
+		dev_err(panel->base.dev, "failed to add additional mode\n");
+		return 0;
+	}
+
+	mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	drm_mode_set_name(mode);
+	drm_mode_probed_add(connector, mode);
+	return 1;
+}
+
 static int panel_edp_get_non_edid_modes(struct panel_edp *panel,
 					struct drm_connector *connector)
 {
@@ -568,6 +589,9 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 {
 	struct panel_edp *p = to_panel_edp(panel);
 	int num = 0;
+	bool has_override_edid_mode = p->detected_panel &&
+				      p->detected_panel != ERR_PTR(-EINVAL) &&
+				      p->detected_panel->override_edid_mode;
 
 	/* probe EDID if a DDC bus is available */
 	if (p->ddc) {
@@ -575,9 +599,18 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 
 		if (!p->edid)
 			p->edid = drm_get_edid(connector, p->ddc);
-
-		if (p->edid)
-			num += drm_add_edid_modes(connector, p->edid);
+		if (p->edid) {
+			if (has_override_edid_mode) {
+				/*
+				 * override_edid_mode is specified. Use
+				 * override_edid_mode instead of from edid.
+				 */
+				num += panel_edp_override_edid_mode(p, connector,
+						p->detected_panel->override_edid_mode);
+			} else {
+				num += drm_add_edid_modes(connector, p->edid);
+			}
+		}
 
 		pm_runtime_mark_last_busy(panel->dev);
 		pm_runtime_put_autosuspend(panel->dev);
@@ -950,6 +983,19 @@ static const struct panel_desc auo_b101ean01 = {
 	},
 };
 
+static const struct drm_display_mode auo_b116xa3_mode = {
+	.clock = 70589,
+	.hdisplay = 1366,
+	.hsync_start = 1366 + 40,
+	.hsync_end = 1366 + 40 + 40,
+	.htotal = 1366 + 40 + 40 + 32,
+	.vdisplay = 768,
+	.vsync_start = 768 + 10,
+	.vsync_end = 768 + 10 + 12,
+	.vtotal = 768 + 10 + 12 + 6,
+	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
 static const struct drm_display_mode auo_b116xak01_mode = {
 	.clock = 69300,
 	.hdisplay = 1366,
@@ -1878,6 +1924,15 @@ static const struct panel_delay delay_200_150_e200 = {
 	.delay = _delay \
 }
 
+#define EDP_PANEL_ENTRY2(vend_chr_0, vend_chr_1, vend_chr_2, product_id, _delay, _name, _mode) \
+{ \
+	.name = _name, \
+	.panel_id = drm_edid_encode_panel_id(vend_chr_0, vend_chr_1, vend_chr_2, \
+					     product_id), \
+	.delay = _delay, \
+	.override_edid_mode = _mode \
+}
+
 /*
  * This table is used to figure out power sequencing delays for panels that
  * are detected by EDID. Entries here may point to entries in the
@@ -1895,9 +1950,11 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x239b, &delay_200_500_e50, "B116XAN06.1"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x255c, &delay_200_500_e50, "B116XTN02.5"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x403d, &delay_200_500_e50, "B140HAN04.0"),
-	EDP_PANEL_ENTRY('A', 'U', 'O', 0x405c, &auo_b116xak01.delay, "B116XAK01.0"),
+	EDP_PANEL_ENTRY2('A', 'U', 'O', 0x405c, &auo_b116xak01.delay, "B116XAK01.0",
+			 &auo_b116xa3_mode),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x582d, &delay_200_500_e50, "B133UAN01.0"),
-	EDP_PANEL_ENTRY('A', 'U', 'O', 0x615c, &delay_200_500_e50, "B116XAN06.1"),
+	EDP_PANEL_ENTRY2('A', 'U', 'O', 0x615c, &delay_200_500_e50, "B116XAN06.1",
+			 &auo_b116xa3_mode),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x635c, &delay_200_500_e50, "B116XAN06.3"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x639c, &delay_200_500_e50, "B140HAK02.7"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x8594, &delay_200_500_e50, "B133UAN01.0"),
-- 
2.42.0.869.gea05f2083d-goog

Re: [PATCH v6 4/5] drm/panel-edp: Add override_edid_mode quirk for generic edp

[Greg KH]

On Tue, Nov 07, 2023 at 12:41:54PM -0800, Hsin-Yi Wang wrote:
> Generic edp gets mode from edid. However, some panels report incorrect
> mode in this way, resulting in glitches on panel. Introduce a new quirk
> additional_mode to the generic edid to pick a correct hardcoded mode.
> 
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
> no change.
> ---
>  drivers/gpu/drm/panel/panel-edp.c | 67 ++++++++++++++++++++++++++++---
>  1 file changed, 62 insertions(+), 5 deletions(-)
> 

<formletter>

This is not the correct way to submit patches for inclusion in the
stable kernel tree.  Please read:
    https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.

</formletter>

Re: [PATCH v6 4/5] drm/panel-edp: Add override_edid_mode quirk for generic edp

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 3819 bytes --]

On Tue, Nov 07, 2023 at 12:41:54PM -0800, Hsin-Yi Wang wrote:
> Generic edp gets mode from edid. However, some panels report incorrect
> mode in this way, resulting in glitches on panel. Introduce a new quirk
> additional_mode to the generic edid to pick a correct hardcoded mode.
> 
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
> no change.
> ---
>  drivers/gpu/drm/panel/panel-edp.c | 67 ++++++++++++++++++++++++++++---
>  1 file changed, 62 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
> index 599a949d74d1..c0c24d94c3a0 100644
> --- a/drivers/gpu/drm/panel/panel-edp.c
> +++ b/drivers/gpu/drm/panel/panel-edp.c
> @@ -203,6 +203,9 @@ struct edp_panel_entry {
>  
>  	/** @name: Name of this panel (for printing to logs). */
>  	const char *name;
> +
> +	/** @override_edid_mode: Override the mode obtained by edid. */
> +	const struct drm_display_mode *override_edid_mode;
>  };
>  
>  struct panel_edp {
> @@ -301,6 +304,24 @@ static unsigned int panel_edp_get_display_modes(struct panel_edp *panel,
>  	return num;
>  }
>  
> +static int panel_edp_override_edid_mode(struct panel_edp *panel,
> +					struct drm_connector *connector,
> +					const struct drm_display_mode *override_mode)
> +{
> +	struct drm_display_mode *mode;
> +
> +	mode = drm_mode_duplicate(connector->dev, override_mode);
> +	if (!mode) {
> +		dev_err(panel->base.dev, "failed to add additional mode\n");
> +		return 0;
> +	}
> +
> +	mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> +	drm_mode_set_name(mode);
> +	drm_mode_probed_add(connector, mode);
> +	return 1;
> +}
> +
>  static int panel_edp_get_non_edid_modes(struct panel_edp *panel,
>  					struct drm_connector *connector)
>  {
> @@ -568,6 +589,9 @@ static int panel_edp_get_modes(struct drm_panel *panel,
>  {
>  	struct panel_edp *p = to_panel_edp(panel);
>  	int num = 0;
> +	bool has_override_edid_mode = p->detected_panel &&
> +				      p->detected_panel != ERR_PTR(-EINVAL) &&
> +				      p->detected_panel->override_edid_mode;
>  
>  	/* probe EDID if a DDC bus is available */
>  	if (p->ddc) {
> @@ -575,9 +599,18 @@ static int panel_edp_get_modes(struct drm_panel *panel,
>  
>  		if (!p->edid)
>  			p->edid = drm_get_edid(connector, p->ddc);
> -
> -		if (p->edid)
> -			num += drm_add_edid_modes(connector, p->edid);
> +		if (p->edid) {
> +			if (has_override_edid_mode) {

It's not clear to me why the override mechanism is only there when
there's a ddc bus?

You mentioned before that you were following panel-simple, but that's a
clear deviation from what I can see. If there's a reason for that
deviation, that's fine by me, but it should at least be documented in
the commit log.

> +				/*
> +				 * override_edid_mode is specified. Use
> +				 * override_edid_mode instead of from edid.
> +				 */
> +				num += panel_edp_override_edid_mode(p, connector,
> +						p->detected_panel->override_edid_mode);
> +			} else {
> +				num += drm_add_edid_modes(connector, p->edid);
> +			}
> +		}
>  
>  		pm_runtime_mark_last_busy(panel->dev);
>  		pm_runtime_put_autosuspend(panel->dev);
> @@ -950,6 +983,19 @@ static const struct panel_desc auo_b101ean01 = {
>  	},
>  };
>  
> +static const struct drm_display_mode auo_b116xa3_mode = {
> +	.clock = 70589,
> +	.hdisplay = 1366,
> +	.hsync_start = 1366 + 40,
> +	.hsync_end = 1366 + 40 + 40,
> +	.htotal = 1366 + 40 + 40 + 32,
> +	.vdisplay = 768,
> +	.vsync_start = 768 + 10,
> +	.vsync_end = 768 + 10 + 12,
> +	.vtotal = 768 + 10 + 12 + 6,
> +	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
> +};

That should be a separate patch

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v6 4/5] drm/panel-edp: Add override_edid_mode quirk for generic edp

[Doug Anderson]

Hi,

On Wed, Nov 8, 2023 at 7:45 AM Maxime Ripard <mripard@kernel.org> wrote:
>
> > @@ -575,9 +599,18 @@ static int panel_edp_get_modes(struct drm_panel *panel,
> >
> >               if (!p->edid)
> >                       p->edid = drm_get_edid(connector, p->ddc);
> > -
> > -             if (p->edid)
> > -                     num += drm_add_edid_modes(connector, p->edid);
> > +             if (p->edid) {
> > +                     if (has_override_edid_mode) {
>
> It's not clear to me why the override mechanism is only there when
> there's a ddc bus?

I think you're confusing the two different (but related) issues
addressed by this series. One is when you're using the generic
"edp-panel" compatible string. In that case the mode comes from the
EDID and only the EDID since there's no hardcoded mode. We need a mode
override there since some EDIDs shipped with a bad mode. That's the
subject of ${SUBJECT} patch.

The second issue is what to do with a hardcoded mode. That's the
subject of the next patch in the series (patch #5). Previously we
merged the hardcoded and EDID modes. Now (in the next patch) we use
only the hardcoded mode. There's no need for a fixup because the mode
is hardcoded in the kernel.


> You mentioned before that you were following panel-simple,

As of the newest version of the patch, it's no longer following
panel-simple in response to your feedback on previous versions.

> but that's a
> clear deviation from what I can see. If there's a reason for that
> deviation, that's fine by me, but it should at least be documented in
> the commit log.

I think the commit log is OK. I suspect the confusion is only because
you've reviewed previous versions of the series. Please shout if
things still look confusing.


> > @@ -950,6 +983,19 @@ static const struct panel_desc auo_b101ean01 = {
> >       },
> >  };
> >
> > +static const struct drm_display_mode auo_b116xa3_mode = {
> > +     .clock = 70589,
> > +     .hdisplay = 1366,
> > +     .hsync_start = 1366 + 40,
> > +     .hsync_end = 1366 + 40 + 40,
> > +     .htotal = 1366 + 40 + 40 + 32,
> > +     .vdisplay = 768,
> > +     .vsync_start = 768 + 10,
> > +     .vsync_end = 768 + 10 + 12,
> > +     .vtotal = 768 + 10 + 12 + 6,
> > +     .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
> > +};
>
> That should be a separate patch

That's fair. I didn't think it was a huge deal, but I agree that it's
slightly cleaner.

-Doug

Re: [PATCH v6 4/5] drm/panel-edp: Add override_edid_mode quirk for generic edp

[Doug Anderson]

Hi,

On Wed, Nov 8, 2023 at 9:04 AM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Wed, Nov 8, 2023 at 7:45 AM Maxime Ripard <mripard@kernel.org> wrote:
> >
> > > @@ -575,9 +599,18 @@ static int panel_edp_get_modes(struct drm_panel *panel,
> > >
> > >               if (!p->edid)
> > >                       p->edid = drm_get_edid(connector, p->ddc);
> > > -
> > > -             if (p->edid)
> > > -                     num += drm_add_edid_modes(connector, p->edid);
> > > +             if (p->edid) {
> > > +                     if (has_override_edid_mode) {
> >
> > It's not clear to me why the override mechanism is only there when
> > there's a ddc bus?
>
> I think you're confusing the two different (but related) issues
> addressed by this series. One is when you're using the generic
> "edp-panel" compatible string. In that case the mode comes from the
> EDID and only the EDID since there's no hardcoded mode. We need a mode
> override there since some EDIDs shipped with a bad mode. That's the
> subject of ${SUBJECT} patch.
>
> The second issue is what to do with a hardcoded mode. That's the
> subject of the next patch in the series (patch #5). Previously we
> merged the hardcoded and EDID modes. Now (in the next patch) we use
> only the hardcoded mode. There's no need for a fixup because the mode
> is hardcoded in the kernel.
>
>
> > You mentioned before that you were following panel-simple,
>
> As of the newest version of the patch, it's no longer following
> panel-simple in response to your feedback on previous versions.
>
> > but that's a
> > clear deviation from what I can see. If there's a reason for that
> > deviation, that's fine by me, but it should at least be documented in
> > the commit log.
>
> I think the commit log is OK. I suspect the confusion is only because
> you've reviewed previous versions of the series. Please shout if
> things still look confusing.
>
>
> > > @@ -950,6 +983,19 @@ static const struct panel_desc auo_b101ean01 = {
> > >       },
> > >  };
> > >
> > > +static const struct drm_display_mode auo_b116xa3_mode = {
> > > +     .clock = 70589,
> > > +     .hdisplay = 1366,
> > > +     .hsync_start = 1366 + 40,
> > > +     .hsync_end = 1366 + 40 + 40,
> > > +     .htotal = 1366 + 40 + 40 + 32,
> > > +     .vdisplay = 768,
> > > +     .vsync_start = 768 + 10,
> > > +     .vsync_end = 768 + 10 + 12,
> > > +     .vtotal = 768 + 10 + 12 + 6,
> > > +     .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
> > > +};
> >
> > That should be a separate patch
>
> That's fair. I didn't think it was a huge deal, but I agree that it's
> slightly cleaner.

I've pushed the first 3 patches but not this patch nor the next one.
It wouldn't hurt to split patch #4 as Maxime requests and then send
the split patch #4 plus patch #5 as a v7. It's probably worth holding
off until either some time passes or Maxime responds and says that his
other concerns are addressed.


-Doug

[PATCH v6 5/5] drm/panel-edp: Avoid adding multiple preferred modes

[Hsin-Yi Wang]

If a non generic edp-panel is under aux-bus, the mode read from edid would
still be selected as preferred and results in multiple preferred modes,
which is ambiguous.

If both hard-coded mode and edid exists, only add mode from hard-coded.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
no change.
---
 drivers/gpu/drm/panel/panel-edp.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index c0c24d94c3a0..006939cc3fee 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -589,6 +589,7 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 {
 	struct panel_edp *p = to_panel_edp(panel);
 	int num = 0;
+	bool has_hard_coded_modes = p->desc->num_timings || p->desc->num_modes;
 	bool has_override_edid_mode = p->detected_panel &&
 				      p->detected_panel != ERR_PTR(-EINVAL) &&
 				      p->detected_panel->override_edid_mode;
@@ -599,7 +600,11 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 
 		if (!p->edid)
 			p->edid = drm_get_edid(connector, p->ddc);
-		if (p->edid) {
+		/*
+		 * If both edid and hard-coded modes exists, skip edid modes to
+		 * avoid multiple preferred modes.
+		 */
+		if (p->edid && !has_hard_coded_modes) {
 			if (has_override_edid_mode) {
 				/*
 				 * override_edid_mode is specified. Use
@@ -616,12 +621,7 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 		pm_runtime_put_autosuspend(panel->dev);
 	}
 
-	/*
-	 * Add hard-coded panel modes. Don't call this if there are no timings
-	 * and no modes (the generic edp-panel case) because it will clobber
-	 * the display_info that was already set by drm_add_edid_modes().
-	 */
-	if (p->desc->num_timings || p->desc->num_modes)
+	if (has_hard_coded_modes)
 		num += panel_edp_get_non_edid_modes(p, connector);
 	else if (!num)
 		dev_warn(p->base.dev, "No display modes\n");
-- 
2.42.0.869.gea05f2083d-goog