public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* Primary ide disk inaccessible. 2.6.11.7, x86_64
@ 2005-04-24 12:12 A.E.Lawrence
  2005-04-24 15:06 ` Daniel Egger
  0 siblings, 1 reply; 3+ messages in thread
From: A.E.Lawrence @ 2005-04-24 12:12 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-ide

AMD64 FX, x86_64 architecture, 2.6.11.7 (and earlier)
-----------------------------------------------------

I have 4 sata, 1 scsi and 1 ata hard disks attached to an Asus A8N-SLI.
The primary ata disc (connected to ide0) is inaccessible:

NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: JTS Corporation CHAMPION MODEL C3000-3A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

But later:-

Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 0 sectors (0 MB) w/256KiB Cache, CHS=5824/16/63, DMA   <=======
hda: cache flushes not supported                            <=======

At some point when I was installing and running some sort of 2.6.n
debian installation kernel, the problem was not present: this disc was
mounted along with the others. But now with all the debian kernels that
I have tried, and my own builds of 2.6.7.11, the disc on ide0 cannot be
used.

There is a report with configurations and dmesg dumps etc here:
http://homepage.ntlworld.com/lawrence_a_e/report.txt

I have turned #DEBUG on in ide-disk.c although I suspect that the 
problem is elsewhere.

ael


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2005-04-24 16:11 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-04-24 12:12 Primary ide disk inaccessible. 2.6.11.7, x86_64 A.E.Lawrence
2005-04-24 15:06 ` Daniel Egger
2005-04-24 16:09   ` A.E.Lawrence

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox