* Re: HP CDRW CD4E hasn't worked since 2.6.11
2006-03-14 23:11 ` HP CDRW CD4E hasn't worked since 2.6.11 Daniel Drake
@ 2006-03-14 23:08 ` Peter Chubb
2006-03-14 23:38 ` Daniel Drake
0 siblings, 1 reply; 4+ messages in thread
From: Peter Chubb @ 2006-03-14 23:08 UTC (permalink / raw)
To: Daniel Drake
Cc: Greg KH, Peter Chubb, linux-kernel, autophile, stern,
linux-usb-devel
[-- Attachment #1: message body text --]
[-- Type: text/plain, Size: 1311 bytes --]
>>>>> "Daniel" == Daniel Drake <dsd@gentoo.org> writes:
Daniel> Greg KH wrote:
>> On Tue, Mar 14, 2006 at 02:25:39PM +1100, Peter Chubb wrote:
>>> Hi Greg, The changes to the usb/storage/shuttle_usbat.c to
>>> accomodate flash drives appears to have broken CD R/W support.
>>>
>>> Sorry it took me so long to report this; I don't use this
>>> particular device very often.
>>>
>>> Compiling with verbose debug shows that the IDENTIFY_PACKET_DEVICE
>>> command is failing, so the device is mis-identified as a flash
>>> drive.
>>>
>>> I went to the start of the Git history in Linus's tree; 2.6.12
>>> also fails.
Daniel> I think it may have worked for you on-and-off in the middle of
Daniel> those changes. It's been a nightmare trying to get both device
Daniel> types identified correctly.
>>> I tried to force the detection, to see if I could get past that
>>> point, but there are still problems -- see the attached logs --
>>> the device is recognised as a scsi disk not cdrom.
Daniel> Can you detail your changes? I'm not convinced by this,
Daniel> because I have been careful not to change any HP8200-specific
Daniel> code (except the detection), and also, I don't think it is
Daniel> possible for the device to appear as a disk if the HP8200
Daniel> codepath is being followed.
Patch appended.
[-- Attachment #2: shuttle --]
[-- Type: text/plain, Size: 5612 bytes --]
drivers/usb/storage/shuttle_usbat.c | 86 +++++-------------------------------
drivers/usb/storage/shuttle_usbat.h | 3 -
drivers/usb/storage/unusual_devs.h | 8 +--
3 files changed, 18 insertions(+), 79 deletions(-)
Index: linux-2.6/drivers/usb/storage/shuttle_usbat.c
===================================================================
--- linux-2.6.orig/drivers/usb/storage/shuttle_usbat.c 2006-03-14 11:40:06.000000000 +1100
+++ linux-2.6/drivers/usb/storage/shuttle_usbat.c 2006-03-14 14:16:30.000000000 +1100
@@ -837,68 +837,23 @@
}
/*
- * Determine whether we are controlling a flash-based reader/writer,
- * or a HP8200-based CD drive.
- * Sets transport functions as appropriate.
- */
-static int usbat_identify_device(struct us_data *us,
- struct usbat_info *info)
-{
- int rc;
- unsigned char status;
-
- if (!us || !info)
- return USB_STOR_TRANSPORT_ERROR;
-
- rc = usbat_device_reset(us);
- if (rc != USB_STOR_TRANSPORT_GOOD)
- return rc;
- msleep(500);
-
- /*
- * In attempt to distinguish between HP CDRW's and Flash readers, we now
- * execute the IDENTIFY PACKET DEVICE command. On ATA devices (i.e. flash
- * readers), this command should fail with error. On ATAPI devices (i.e.
- * CDROM drives), it should succeed.
- */
- rc = usbat_write(us, USBAT_ATA, USBAT_ATA_CMD, 0xA1);
- if (rc != USB_STOR_XFER_GOOD)
- return USB_STOR_TRANSPORT_ERROR;
-
- rc = usbat_get_status(us, &status);
- if (rc != USB_STOR_XFER_GOOD)
- return USB_STOR_TRANSPORT_ERROR;
-
- /* Check for error bit, or if the command 'fell through' */
- if (status == 0xA1 || !(status & 0x01)) {
- /* Device is HP 8200 */
- US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n");
- info->devicetype = USBAT_DEV_HP8200;
- } else {
- /* Device is a CompactFlash reader/writer */
- US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
- info->devicetype = USBAT_DEV_FLASH;
- }
-
- return USB_STOR_TRANSPORT_GOOD;
-}
-
-/*
* Set the transport function based on the device type
*/
static int usbat_set_transport(struct us_data *us,
- struct usbat_info *info)
+ struct usbat_info *info,
+ int devicetype)
{
- int rc;
-
if (!info->devicetype) {
- rc = usbat_identify_device(us, info);
- if (rc != USB_STOR_TRANSPORT_GOOD) {
- US_DEBUGP("usbat_set_transport: Could not identify device\n");
- return 1;
- }
+ int rc = usbat_device_reset(us);
+ if (rc)
+ return rc;
+ msleep(500);
+ info->devicetype = devicetype;
}
+ if (!info->devicetype)
+ return USB_STOR_TRANSPORT_ERROR;
+
if (usbat_get_device_type(us) == USBAT_DEV_HP8200)
us->transport = usbat_hp8200e_transport;
else if (usbat_get_device_type(us) == USBAT_DEV_FLASH)
@@ -1310,7 +1265,7 @@
/*
* Initialize the USBAT processor and the storage device
*/
-int init_usbat(struct us_data *us)
+static int init_usbat(struct us_data *us, int devicetype)
{
int rc;
struct usbat_info *info;
@@ -1393,7 +1348,7 @@
US_DEBUGP("INIT 9\n");
/* At this point, we need to detect which device we are using */
- if (usbat_set_transport(us, info))
+ if (usbat_set_transport(us, info, devicetype))
return USB_STOR_TRANSPORT_ERROR;
US_DEBUGP("INIT 10\n");
@@ -1696,6 +1651,17 @@
return USB_STOR_TRANSPORT_FAILED;
}
+int init_usbat_cd(struct us_data *us)
+{
+ return init_usbat(us, USBAT_DEV_HP8200);
+}
+
+
+int init_usbat_flash(struct us_data *us)
+{
+ return init_usbat(us, USBAT_DEV_FLASH);
+}
+
/*
* Default transport function. Attempts to detect which transport function
* should be called, makes it the new default, and calls it.
@@ -1709,9 +1675,8 @@
{
struct usbat_info *info = (struct usbat_info*) (us->extra);
- if (usbat_set_transport(us, info))
+ if (usbat_set_transport(us, info, 0))
return USB_STOR_TRANSPORT_ERROR;
return us->transport(srb, us);
}
-
Index: linux-2.6/drivers/usb/storage/shuttle_usbat.h
===================================================================
--- linux-2.6.orig/drivers/usb/storage/shuttle_usbat.h 2006-03-14 11:40:06.000000000 +1100
+++ linux-2.6/drivers/usb/storage/shuttle_usbat.h 2006-03-14 12:53:25.000000000 +1100
@@ -106,7 +106,8 @@
#define USBAT_FEAT_ET2 0x01
extern int usbat_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int init_usbat(struct us_data *us);
+extern int init_usbat_cd(struct us_data *us);
+extern int init_usbat_flash(struct us_data *us);
struct usbat_info {
int devicetype;
Index: linux-2.6/drivers/usb/storage/unusual_devs.h
===================================================================
--- linux-2.6.orig/drivers/usb/storage/unusual_devs.h 2006-03-14 11:40:06.000000000 +1100
+++ linux-2.6/drivers/usb/storage/unusual_devs.h 2006-03-14 12:56:49.000000000 +1100
@@ -71,12 +71,12 @@
UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001,
"HP",
"CD-Writer+ 8200e",
- US_SC_8070, US_PR_USBAT, init_usbat, 0),
+ US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
"HP",
"CD-Writer+ CD-4e",
- US_SC_8070, US_PR_USBAT, init_usbat, 0),
+ US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
#endif
/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
@@ -380,7 +380,7 @@
UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999,
"Shuttle/SCM",
"USBAT-02",
- US_SC_SCSI, US_PR_USBAT, init_usbat,
+ US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
US_FL_SINGLE_LUN),
#endif
@@ -770,7 +770,7 @@
UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005,
"Sandisk",
"ImageMate SDDR-05b",
- US_SC_SCSI, US_PR_USBAT, init_usbat,
+ US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
US_FL_SINGLE_LUN ),
#endif
[-- Attachment #3: .signature --]
[-- Type: text/plain, Size: 158 bytes --]
--
Dr Peter Chubb http://www.gelato.unsw.edu.au peterc AT gelato.unsw.edu.au
http://www.ertos.nicta.com.au ERTOS within National ICT Australia
^ permalink raw reply [flat|nested] 4+ messages in thread