From: Stefan Richter <stefanr@s5r6.in-berlin.de>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: Andrew Morton <akpm@osdl.org>,
Linux Kernel list <linux-kernel@vger.kernel.org>,
Ingo Molnar <mingo@elte.hu>, sam <sam@ravnborg.org>
Subject: Re: [PATCH] introduce HAVE_EFFICIENT_UNALIGNED_ACCESS Kconfig symbol
Date: Tue, 08 Apr 2008 17:41:03 +0200 [thread overview]
Message-ID: <47FB920F.60503@s5r6.in-berlin.de> (raw)
In-Reply-To: <1207667127.14253.42.camel@johannes.berg>
Johannes Berg wrote:
> --- everything.orig/Documentation/unaligned-memory-access.txt 2008-04-04 23:42:50.000000000 +0200
> +++ everything/Documentation/unaligned-memory-access.txt 2008-04-04 23:52:15.000000000 +0200
> @@ -218,9 +218,35 @@ If use of such macros is not convenient,
> where the source or destination (or both) are of type u8* or unsigned char*.
> Due to the byte-wise nature of this operation, unaligned accesses are avoided.
>
> +
> +Alignment vs. Networking
> +========================
> +
> +On architectures that require aligned loads, networking requires that the IP
> +header is aligned on a four-byte boundary to optimise the IP stack. For
> +regular ethernet hardware, the constant NET_IP_ALIGN is used, on most
. On
> +architectures this constant has the value 2 because the normal ethernet
> +header is 14 bytes long, so in order to get proper alignment one needs to
. So
> +DMA to an address that is can be expressed as 4*n + 2. One notable exception
which can
> +here is powerpc which defines NET_IP_ALIGN to 0 because DMA to unaligned
> +addresses can be very expensive and dwarf the cost of unaligned loads.
> +
> +For some ethernet hardware that cannot DMA to unaligned addresses like
> +4*n+2 or non-ethernet hardware, this can be a problem, and it is then
> +required to copy the incoming frame into an aligned buffer. Because this is
> +unnecessary on architectures that can do unaligned accesses, the code can be
> +made depend on CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS like so:
made dependent on
> +
> +#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
> + skb = original skb
> +#else
> + skb = copy skb
> +#endif
> +
> --
> -Author: Daniel Drake <dsd@gentoo.org>
> +Authors: Daniel Drake <dsd@gentoo.org>,
> + Johannes Berg <johannes@sipsolutions.net>
> With help from: Alan Cox, Avuton Olrich, Heikki Orsila, Jan Engelhardt,
> -Johannes Berg, Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock,
> -Uli Kunitz, Vadim Lobanov
> +Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock, Uli Kunitz,
> +Vadim Lobanov
>
> --- everything.orig/arch/powerpc/Kconfig 2008-04-04 23:42:53.000000000 +0200
> +++ everything/arch/powerpc/Kconfig 2008-04-04 23:52:15.000000000 +0200
> @@ -103,6 +103,7 @@ config PPC
> select HAVE_OPROFILE
> select HAVE_KPROBES
> select HAVE_KRETPROBES
> + select HAVE_EFFICIENT_UNALIGNED_ACCESS
>
> config EARLY_PRINTK
> bool
> --- everything.orig/arch/x86/Kconfig 2008-04-04 23:42:50.000000000 +0200
> +++ everything/arch/x86/Kconfig 2008-04-04 23:52:15.000000000 +0200
> @@ -23,6 +23,7 @@ config X86
> select HAVE_KPROBES
> select HAVE_KRETPROBES
> select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
> + select HAVE_EFFICIENT_UNALIGNED_ACCESS
>
>
> config GENERIC_LOCKBREAK
> --- everything.orig/arch/Kconfig 2008-04-04 23:42:50.000000000 +0200
> +++ everything/arch/Kconfig 2008-04-04 23:52:15.000000000 +0200
> @@ -36,3 +36,22 @@ config HAVE_KPROBES
>
> config HAVE_KRETPROBES
> def_bool n
> +
> +config HAVE_EFFICIENT_UNALIGNED_ACCESS
> + def_bool n
> + help
> + Some architectures are unable to perform unaligned accesses
> + without the use of get_unaligned/put_unaligned. Others are
> + unable to perform such accesses efficiently (e.g. trap on
Wouldn't a comment be more appropriate instead of a help text? This
option shouldn't be a visible make XYZconfig prompt.
I have no comment on the option itself; it's not my domain.
--
Stefan Richter
-=====-==--- -=-- -=---
http://arcgraph.de/sr/
next prev parent reply other threads:[~2008-04-08 15:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-08 15:05 [PATCH] introduce HAVE_EFFICIENT_UNALIGNED_ACCESS Kconfig symbol Johannes Berg
2008-04-08 15:41 ` Stefan Richter [this message]
2008-04-08 16:00 ` Johannes Berg
2008-04-08 16:03 ` [PATCH v6] " Johannes Berg
2008-04-08 19:11 ` [PATCH] " Roman Zippel
2008-04-09 13:43 ` Johannes Berg
-- strict thread matches above, loose matches on Subject: below --
2008-05-07 21:05 Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47FB920F.60503@s5r6.in-berlin.de \
--to=stefanr@s5r6.in-berlin.de \
--cc=akpm@osdl.org \
--cc=johannes@sipsolutions.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox