[PATCH 1/1] x86: Add config option to setup early serial console

[PATCH 1/1] x86: Add config option to setup early serial console

[Mike Travis]

[-- Attachment #1: setup-early-serial-console --]
[-- Type: text/plain, Size: 694 bytes --]

 * Add config option EARLY_SERIAL_CONSOLE to enable early
   printk's to be directed to the serial console.

Based on linux-next

Signed-off-by: Mike Travis <travis@sgi.com>
---

---
 arch/x86/kernel/early_printk.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- linux-2.6.tip.orig/arch/x86/kernel/early_printk.c
+++ linux-2.6.tip/arch/x86/kernel/early_printk.c
@@ -193,7 +193,7 @@ static struct console simnow_console = {
 };
 
 /* Direct interface for emergencies */
-static struct console *early_console = &early_vga_console;
+static struct console *early_console = &early_serial_console;
 static int early_console_initialized;
 
 void early_printk(const char *fmt, ...)

-- 

Re: [PATCH 1/1] x86: Add config option to setup early serial console

[Mike Travis]

Sorry, please ignore this patch.  I missed the quilt refresh
to pick up the latest version and will resend shortly.

Mike Travis wrote:
>  * Add config option EARLY_SERIAL_CONSOLE to enable early
>    printk's to be directed to the serial console.
> 
> Based on linux-next
> 
> Signed-off-by: Mike Travis <travis@sgi.com>
> ---
> 
> ---
>  arch/x86/kernel/early_printk.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> --- linux-2.6.tip.orig/arch/x86/kernel/early_printk.c
> +++ linux-2.6.tip/arch/x86/kernel/early_printk.c
> @@ -193,7 +193,7 @@ static struct console simnow_console = {
>  };
>  
>  /* Direct interface for emergencies */
> -static struct console *early_console = &early_vga_console;
> +static struct console *early_console = &early_serial_console;
>  static int early_console_initialized;
>  
>  void early_printk(const char *fmt, ...)
> 

[PATCH 1/1] x86: Add config option to setup early serial console

[Mike Travis]

[-- Attachment #1: setup-early-serial-console --]
[-- Type: text/plain, Size: 1370 bytes --]

 * Add config option EARLY_SERIAL_CONSOLE to enable early
   printk's to be directed to the serial console.

Based on linux-next

Signed-off-by: Mike Travis <travis@sgi.com>
---

---
 arch/x86/Kconfig.debug         |    9 +++++++++
 arch/x86/kernel/early_printk.c |    4 ++++
 2 files changed, 13 insertions(+)

--- linux-2.6-next.orig/arch/x86/Kconfig.debug
+++ linux-2.6-next/arch/x86/Kconfig.debug
@@ -29,6 +29,15 @@ config EARLY_PRINTK
 	  with klogd/syslogd or the X server. You should normally N here,
 	  unless you want to debug such a crash.
 
+config EARLY_SERIAL_CONSOLE
+	bool "Early Serial Console"
+	default m
+	help
+	  Initializes the early console to be the serial port.  The default
+	  is to use the VGA console.
+
+	  This is useful for server systems that do not have a VGA console.
+
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL
--- linux-2.6-next.orig/arch/x86/kernel/early_printk.c
+++ linux-2.6-next/arch/x86/kernel/early_printk.c
@@ -193,7 +193,11 @@ static struct console simnow_console = {
 };
 
 /* Direct interface for emergencies */
+#ifdef CONFIG_EARLY_SERIAL_CONSOLE
+static struct console *early_console = &early_serial_console;
+#else
 static struct console *early_console = &early_vga_console;
+#endif
 static int early_console_initialized;
 
 void early_printk(const char *fmt, ...)

-- 

Re: [PATCH 1/1] x86: Add config option to setup early serial console

[H. Peter Anvin]

Mike Travis wrote:
>  * Add config option EARLY_SERIAL_CONSOLE to enable early
>    printk's to be directed to the serial console.
> 
> Based on linux-next
> 
> Signed-off-by: Mike Travis <travis@sgi.com>

Is there any reason this can't be done dynamically, via a command-line 
option instead?

We can get to the command line extremely early if need be.

	-hpa

Re: [PATCH 1/1] x86: Add config option to setup early serial console

[Mike Travis]

Boy, this just isn't my day... Another typo slipped through...


Mike Travis wrote:
>  * Add config option EARLY_SERIAL_CONSOLE to enable early
>    printk's to be directed to the serial console.
> 
> Based on linux-next
> 
> Signed-off-by: Mike Travis <travis@sgi.com>
> ---
> 
> ---
>  arch/x86/Kconfig.debug         |    9 +++++++++
>  arch/x86/kernel/early_printk.c |    4 ++++
>  2 files changed, 13 insertions(+)
> 
> --- linux-2.6-next.orig/arch/x86/Kconfig.debug
> +++ linux-2.6-next/arch/x86/Kconfig.debug
> @@ -29,6 +29,15 @@ config EARLY_PRINTK
>  	  with klogd/syslogd or the X server. You should normally N here,
>  	  unless you want to debug such a crash.
>  
> +config EARLY_SERIAL_CONSOLE
> +	bool "Early Serial Console"
> +	default m
> +	help
> +	  Initializes the early console to be the serial port.  The default
> +	  is to use the VGA console.
> +
> +	  This is useful for server systems that do not have a VGA console.
> +
>  config DEBUG_STACKOVERFLOW
>  	bool "Check for stack overflows"
>  	depends on DEBUG_KERNEL
> --- linux-2.6-next.orig/arch/x86/kernel/early_printk.c
> +++ linux-2.6-next/arch/x86/kernel/early_printk.c
> @@ -193,7 +193,11 @@ static struct console simnow_console = {
>  };
>  
>  /* Direct interface for emergencies */
> +#ifdef CONFIG_EARLY_SERIAL_CONSOLE
> +static struct console *early_console = &early_serial_console;
> +#else
>  static struct console *early_console = &early_vga_console;
> +#endif
>  static int early_console_initialized;
>  
>  void early_printk(const char *fmt, ...)
> 

[PATCH 1/1] x86: Add config option to setup early serial console

[Mike Travis]

[-- Attachment #1: setup-early-serial-console --]
[-- Type: text/plain, Size: 1370 bytes --]

 * Add config option EARLY_SERIAL_CONSOLE to enable early
   printk's to be directed to the serial console.

Based on linux-next

Signed-off-by: Mike Travis <travis@sgi.com>
---

---
 arch/x86/Kconfig.debug         |    9 +++++++++
 arch/x86/kernel/early_printk.c |    4 ++++
 2 files changed, 13 insertions(+)

--- linux-2.6-next.orig/arch/x86/Kconfig.debug
+++ linux-2.6-next/arch/x86/Kconfig.debug
@@ -29,6 +29,15 @@ config EARLY_PRINTK
 	  with klogd/syslogd or the X server. You should normally N here,
 	  unless you want to debug such a crash.
 
+config EARLY_SERIAL_CONSOLE
+	bool "Early Serial Console"
+	default n
+	help
+	  Initializes the early console to be the serial port.  The default
+	  is to use the VGA console.
+
+	  This is useful for server systems that do not have a VGA console.
+
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL
--- linux-2.6-next.orig/arch/x86/kernel/early_printk.c
+++ linux-2.6-next/arch/x86/kernel/early_printk.c
@@ -193,7 +193,11 @@ static struct console simnow_console = {
 };
 
 /* Direct interface for emergencies */
+#ifdef CONFIG_EARLY_SERIAL_CONSOLE
+static struct console *early_console = &early_serial_console;
+#else
 static struct console *early_console = &early_vga_console;
+#endif
 static int early_console_initialized;
 
 void early_printk(const char *fmt, ...)

-- 

Re: [PATCH 1/1] x86: Add config option to setup early serial console

[Andrew Morton]

On Thu, 12 Jun 2008 15:38:03 -0700
Mike Travis <travis@sgi.com> wrote:

>  * Add config option EARLY_SERIAL_CONSOLE to enable early
>    printk's to be directed to the serial console.
> 
> Based on linux-next
> 
> Signed-off-by: Mike Travis <travis@sgi.com>
> ---
> 
> ---
>  arch/x86/Kconfig.debug         |    9 +++++++++
>  arch/x86/kernel/early_printk.c |    4 ++++
>  2 files changed, 13 insertions(+)
> 
> --- linux-2.6-next.orig/arch/x86/Kconfig.debug
> +++ linux-2.6-next/arch/x86/Kconfig.debug
> @@ -29,6 +29,15 @@ config EARLY_PRINTK
>  	  with klogd/syslogd or the X server. You should normally N here,
>  	  unless you want to debug such a crash.
>  
> +config EARLY_SERIAL_CONSOLE
> +	bool "Early Serial Console"
> +	default m
> +	help
> +	  Initializes the early console to be the serial port.  The default
> +	  is to use the VGA console.
> +
> +	  This is useful for server systems that do not have a VGA console.
> +
>  config DEBUG_STACKOVERFLOW
>  	bool "Check for stack overflows"
>  	depends on DEBUG_KERNEL
> --- linux-2.6-next.orig/arch/x86/kernel/early_printk.c
> +++ linux-2.6-next/arch/x86/kernel/early_printk.c
> @@ -193,7 +193,11 @@ static struct console simnow_console = {
>  };
>  
>  /* Direct interface for emergencies */
> +#ifdef CONFIG_EARLY_SERIAL_CONSOLE
> +static struct console *early_console = &early_serial_console;
> +#else
>  static struct console *early_console = &early_vga_console;
> +#endif
>  static int early_console_initialized;
>  
>  void early_printk(const char *fmt, ...)
> 

Confused.  What's wrong with console=uart,...?

Re: [PATCH 1/1] x86: Add config option to setup early serial console

[Yinghai Lu]

On Thu, Jun 12, 2008 at 3:42 PM, Mike Travis <travis@sgi.com> wrote:
>  * Add config option EARLY_SERIAL_CONSOLE to enable early
>   printk's to be directed to the serial console.
>
> Based on linux-next
>
> Signed-off-by: Mike Travis <travis@sgi.com>
> ---
>
> ---
>  arch/x86/Kconfig.debug         |    9 +++++++++
>  arch/x86/kernel/early_printk.c |    4 ++++
>  2 files changed, 13 insertions(+)
>
> --- linux-2.6-next.orig/arch/x86/Kconfig.debug
> +++ linux-2.6-next/arch/x86/Kconfig.debug
> @@ -29,6 +29,15 @@ config EARLY_PRINTK
>          with klogd/syslogd or the X server. You should normally N here,
>          unless you want to debug such a crash.
>
> +config EARLY_SERIAL_CONSOLE
> +       bool "Early Serial Console"
> +       default n
> +       help
> +         Initializes the early console to be the serial port.  The default
> +         is to use the VGA console.
> +
> +         This is useful for server systems that do not have a VGA console.
> +
>  config DEBUG_STACKOVERFLOW
>        bool "Check for stack overflows"
>        depends on DEBUG_KERNEL
> --- linux-2.6-next.orig/arch/x86/kernel/early_printk.c
> +++ linux-2.6-next/arch/x86/kernel/early_printk.c
> @@ -193,7 +193,11 @@ static struct console simnow_console = {
>  };
>
>  /* Direct interface for emergencies */
> +#ifdef CONFIG_EARLY_SERIAL_CONSOLE
> +static struct console *early_console = &early_serial_console;
> +#else
>  static struct console *early_console = &early_vga_console;
> +#endif
>  static int early_console_initialized;
>
>  void early_printk(const char *fmt, ...)
>

can you check if it can work with
console=uart8250,io,0x3f8,115200

that is early console, and will switch to normal console automatically

YH

Re: [PATCH 1/1] x86: Add config option to setup early serial console

[Mike Travis]

H. Peter Anvin wrote:
> Mike Travis wrote:
>>  * Add config option EARLY_SERIAL_CONSOLE to enable early
>>    printk's to be directed to the serial console.
>>
>> Based on linux-next
>>
>> Signed-off-by: Mike Travis <travis@sgi.com>
> 
> Is there any reason this can't be done dynamically, via a command-line
> option instead?
> 
> We can get to the command line extremely early if need be.
> 
>     -hpa

We could.  My current debugging is in x86_64_start_kernel() almost at
the start of the function (before the "Kernel alive" message).  The
code is below.  (cut and pasted so no tabs)

One benefit of a startup option instead of a config option  is we rely
on the standard distribution for the kernel and unless they set this
option it won't do us much good.

(Maybe the failed attempts was trying to tell me something? ;-)

Thanks,
Mike

        /* Cleanup the over mapped high alias */
        cleanup_highmap();

... my debugging is here ...

        for (i = 0; i < NUM_EXCEPTION_VECTORS; i++) {
#ifdef CONFIG_EARLY_PRINTK
                set_intr_gate(i, &early_idt_handlers[i]);
#else
                set_intr_gate(i, early_idt_handler);
#endif
        }
        load_idt((const struct desc_ptr *)&idt_descr);

        early_printk("Kernel alive\n");

        for (i = 0; i < NR_CPUS; i++)
                cpu_pda(i) = &boot_cpu_pda[i];

        pda_init(0);
        copy_bootdata(__va(real_mode_data));

... startup params available here ...

        reserve_early(__pa_symbol(&_text), __pa_symbol(&_end), "TEXT DATA BSS");

#ifdef CONFIG_BLK_DEV_INITRD
        /* Reserve INITRD */
        if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
                unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
                unsigned long ramdisk_size  = boot_params.hdr.ramdisk_size;
                unsigned long ramdisk_end   = ramdisk_image + ramdisk_size;
                reserve_early(ramdisk_image, ramdisk_end, "RAMDISK");
        }
#endif

Re: [PATCH 1/1] x86: Add config option to setup early serial console

[Mike Travis]

Andrew Morton wrote:
> On Thu, 12 Jun 2008 15:38:03 -0700
> Mike Travis <travis@sgi.com> wrote:
> 
>>  * Add config option EARLY_SERIAL_CONSOLE to enable early
>>    printk's to be directed to the serial console.
...
>>
> 
> Confused.  What's wrong with console=uart,...?
> 

The problem is that I need the output really, really early before
the console is initialized.

Re: [PATCH 1/1] x86: Add config option to setup early serial console

[H. Peter Anvin]

Mike Travis wrote:
> 
> We could.  My current debugging is in x86_64_start_kernel() almost at
> the start of the function (before the "Kernel alive" message).  The
> code is below.  (cut and pasted so no tabs)
> 
> One benefit of a startup option instead of a config option  is we rely
> on the standard distribution for the kernel and unless they set this
> option it won't do us much good.
> 
> (Maybe the failed attempts was trying to tell me something? ;-)
> 

The easiest way to get to something extremely early is to parse it out 
already in the setup code and pass in a flag in struct boot_params. 
Otherwise, the kernel command line is present in memory and can be 
copied or parsed in an ad hoc manner.  For i386 it is copied in place 
already in the assembly code -- for x86-64 it looks like we could 
trivially move copy_bootdata until just past clear_bss().

	-hpa

Re: [PATCH 1/1] x86: Add config option to setup early serial console

[Mike Travis]

Yinghai Lu wrote:
> On Thu, Jun 12, 2008 at 3:42 PM, Mike Travis <travis@sgi.com> wrote:
>>  * Add config option EARLY_SERIAL_CONSOLE to enable early
>>   printk's to be directed to the serial console.
>>
>> Based on linux-next
>>
>> Signed-off-by: Mike Travis <travis@sgi.com>
>> ---
>>
>> ---
>>  arch/x86/Kconfig.debug         |    9 +++++++++
>>  arch/x86/kernel/early_printk.c |    4 ++++
>>  2 files changed, 13 insertions(+)
>>
>> --- linux-2.6-next.orig/arch/x86/Kconfig.debug
>> +++ linux-2.6-next/arch/x86/Kconfig.debug
>> @@ -29,6 +29,15 @@ config EARLY_PRINTK
>>          with klogd/syslogd or the X server. You should normally N here,
>>          unless you want to debug such a crash.
>>
>> +config EARLY_SERIAL_CONSOLE
>> +       bool "Early Serial Console"
>> +       default n
>> +       help
>> +         Initializes the early console to be the serial port.  The default
>> +         is to use the VGA console.
>> +
>> +         This is useful for server systems that do not have a VGA console.
>> +
>>  config DEBUG_STACKOVERFLOW
>>        bool "Check for stack overflows"
>>        depends on DEBUG_KERNEL
>> --- linux-2.6-next.orig/arch/x86/kernel/early_printk.c
>> +++ linux-2.6-next/arch/x86/kernel/early_printk.c
>> @@ -193,7 +193,11 @@ static struct console simnow_console = {
>>  };
>>
>>  /* Direct interface for emergencies */
>> +#ifdef CONFIG_EARLY_SERIAL_CONSOLE
>> +static struct console *early_console = &early_serial_console;
>> +#else
>>  static struct console *early_console = &early_vga_console;
>> +#endif
>>  static int early_console_initialized;
>>
>>  void early_printk(const char *fmt, ...)
>>
> 
> can you check if it can work with
> console=uart8250,io,0x3f8,115200
> 
> that is early console, and will switch to normal console automatically
> 
> YH

I'll rework the patch to enable the serial console as early as possible.
Currently, it's done quite a ways down in start_kernel().

Thanks,
Mike

Re: [PATCH 1/1] x86: Add config option to setup early serial console

[Andrew Morton]

On Thu, 12 Jun 2008 15:58:08 -0700
Mike Travis <travis@sgi.com> wrote:

> Andrew Morton wrote:
> > On Thu, 12 Jun 2008 15:38:03 -0700
> > Mike Travis <travis@sgi.com> wrote:
> > 
> >>  * Add config option EARLY_SERIAL_CONSOLE to enable early
> >>    printk's to be directed to the serial console.
> ...
> >>
> > 
> > Confused.  What's wrong with console=uart,...?
> > 
> 
> The problem is that I need the output really, really early before
> the console is initialized.

Sorry, I meant earlycon=uart..

Re: [PATCH 1/1] x86: Add config option to setup early serial console

[Yinghai Lu]

On Thu, Jun 12, 2008 at 4:10 PM, Andrew Morton
<akpm@linux-foundation.org> wrote:
> On Thu, 12 Jun 2008 15:58:08 -0700
> Mike Travis <travis@sgi.com> wrote:
>
>> Andrew Morton wrote:
>> > On Thu, 12 Jun 2008 15:38:03 -0700
>> > Mike Travis <travis@sgi.com> wrote:
>> >
>> >>  * Add config option EARLY_SERIAL_CONSOLE to enable early
>> >>    printk's to be directed to the serial console.
>> ...
>> >>
>> >
>> > Confused.  What's wrong with console=uart,...?
>> >
>>
>> The problem is that I need the output really, really early before
>> the console is initialized.
>
> Sorry, I meant earlycon=uart..

the same. it checks earlycon=uart and console=uart...

YH

Re: [PATCH 1/1] x86: Add config option to setup early serial console

[Yinghai Lu]

On Thu, Jun 12, 2008 at 4:10 PM, Andrew Morton
<akpm@linux-foundation.org> wrote:
> On Thu, 12 Jun 2008 15:58:08 -0700
> Mike Travis <travis@sgi.com> wrote:
>
>> Andrew Morton wrote:
>> > On Thu, 12 Jun 2008 15:38:03 -0700
>> > Mike Travis <travis@sgi.com> wrote:
>> >
>> >>  * Add config option EARLY_SERIAL_CONSOLE to enable early
>> >>    printk's to be directed to the serial console.
>> ...
>> >>
>> >
>> > Confused.  What's wrong with console=uart,...?
>> >
>>
>> The problem is that I need the output really, really early before
>> the console is initialized.
>
> Sorry, I meant earlycon=uart..
> --

could move the parsing from early_param to head_64.c::x86_64_start_kernel

YH

Re: [PATCH 1/1] x86: Add config option to setup early serial console

[Ingo Molnar]

* Mike Travis <travis@sgi.com> wrote:

> > can you check if it can work with
> > console=uart8250,io,0x3f8,115200
> > 
> > that is early console, and will switch to normal console automatically
> > 
> > YH
> 
> I'll rework the patch to enable the serial console as early as 
> possible. Currently, it's done quite a ways down in start_kernel().

ok, will skip this patch for now then.

	Ingo