* Re: /dev/sdb not detected anymore?
2009-10-04 1:02 ` Robert Hancock
@ 2009-10-04 2:08 ` Peter Teoh
2009-10-05 14:49 ` Peter Teoh
0 siblings, 1 reply; 4+ messages in thread
From: Peter Teoh @ 2009-10-04 2:08 UTC (permalink / raw)
To: Robert Hancock; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 2377 bytes --]
thank you for the response. the bug report i just raised is this:
http://bugzilla.kernel.org/show_bug.cgi?id=14319
and attachment is:
http://bugzilla.kernel.org/attachment.cgi?id=23255
Thanks.
On Sat, Oct 3, 2009 at 9:02 PM, Robert Hancock <hancockrwd@gmail.com> wrote:
> On 10/02/2009 08:07 AM, Peter Teoh wrote:
>>
>> I just built my 2.6.32-rc2 (from linus-git) yesterday, and repeated
>> today again, starting from "make mrproper", and consistently both
>> version cannot detect my /dev/sdb, which is the second SATA harddisk.
>> The first SATA is detected as follows in dmesg:
>>
>> 742 [ 4.595949] scsi 2:0:0:0: Direct-Access ATA
>> ST3500630AS 3.AA PQ: 0 ANSI: 5
>> 743 [ 4.596116] sd 2:0:0:0: [sda] 976773168 512-byte logical
>> blocks: (500 GB/465 GiB)
>> 744 [ 4.596213] sd 2:0:0:0: [sda] Write Protect is off
>> 745 [ 4.596216] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> 746 [ 4.596258] sd 2:0:0:0: [sda] Write cache: enabled, read
>> cache: enabled, doesn't support DPO or FUA
>> 747 [ 4.596467] sda: sda1 sda2 sda3 sda4< sda5 sda6 sda7 sda8
>> sda9>
>> 748 [ 4.674607] sd 2:0:0:0: [sda] Attached SCSI disk
>>
>> And from sg_inq:
>>
>> standard INQUIRY:
>> PQual=0 Device_type=0 RMB=0 version=0x05 [SPC-3]
>> [AERC=0] [TrmTsk=0] NormACA=0 HiSUP=0 Resp_data_format=2
>> SCCS=0 ACC=0 TPGS=0 3PC=0 Protect=0 BQue=0
>> EncServ=0 MultiP=0 [MChngr=0] [ACKREQQ=0] Addr16=0
>> [RelAdr=0] WBus16=0 Sync=0 Linked=0 [TranDis=0] CmdQue=0
>> [SPI: Clocking=0x0 QAS=0 IUS=0]
>> length=96 (0x60) Peripheral device type: disk
>> Vendor identification: ATA
>> Product identification: ST3500630AS
>> Product revision level: 3.AA
>> Unit serial number: 9QG14T5Z
>>
>> But the second SATA (identical in type/model) is not detectable.
>> Upon rebooting to my previous 2.6.31 kernel version, it became
>> detected and usable - absolutely nothing else is touch. So what is
>> it in the latest kernel which is giving the problem?
>
> We need more details, can you post the full boot log including the actual
> libata messages from the working and non-working kernels?
>
and the full bootlog is here (not in bugzilla submission) (timestamp
removed for your easy comparison).
--
Regards,
Peter Teoh
[-- Attachment #2: dmesg_2.6.32-rc2_noproblem_sdb --]
[-- Type: application/octet-stream, Size: 39863 bytes --]
Linux version 2.6.32-rc2 (root@localhost.localdomain) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Fri Oct 2 14:24:58 EDT 2009
Command line: ro root=UUID=d10fe8db-e7d4-4b42-b265-0109a3f3eedf rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 080000000 mask F80000000 uncachable
1 base 000000000 mask F00000000 write-back
2 base 100000000 mask FC0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7ff90 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007ff90000
0000000000 - 007ff90000 page 4k
kernel direct mapping tables up to 7ff90000 @ 100000-503000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 4k
kernel direct mapping tables up to 140000000 @ 501000-f07000
RAMDISK: 37c6d000 - 37fefc3c
ACPI: RSDP 00000000000fae40 00014 (v00 ACPIAM)
ACPI: RSDT 000000007ff90000 0003C (v01 ÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿ 01000722 MSFT 00000097)
ACPI: FACP 000000007ff90200 00084 (v02 MSTEST OEMFACP 01000722 MSFT 00000097)
ACPI: DSDT 000000007ff905c0 08E63 (v01 A0667 A0667000 00000000 INTL 20060113)
ACPI: FACS 000000007ff9e000 00040
ACPI: APIC 000000007ff90390 0006C (v01 MSTEST OEMAPIC 01000722 MSFT 00000097)
ACPI: MCFG 000000007ff90400 0003C (v01 MSTEST OEMMCFG 01000722 MSFT 00000097)
ACPI: SLIC 000000007ff90440 00176 (v01 ÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿ 01000722 MSFT 00000097)
ACPI: OEMB 000000007ff9e040 0007B (v01 MSTEST AMI_OEM 01000722 MSFT 00000097)
ACPI: HPET 000000007ff99430 00038 (v01 MSTEST OEMHPET 01000722 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
(8 early reservations) ==> bootmem [0000000000 - 0140000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001c273c0] TEXT DATA BSS ==> [0001000000 - 0001c273c0]
#3 [0037c6d000 - 0037fefc3c] RAMDISK ==> [0037c6d000 - 0037fefc3c]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0001c28000 - 0001c28290] BRK ==> [0001c28000 - 0001c28290]
#6 [0000100000 - 0000501000] PGTABLE ==> [0000100000 - 0000501000]
#7 [0000501000 - 0000702000] PGTABLE ==> [0000501000 - 0000702000]
found SMP MP-table at [ffff8800000ff780] ff780
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002affffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007ff90
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 786207
DMA zone: 56 pages used for memmap
DMA zone: 1637 pages reserved
DMA zone: 2290 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 505800 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a202 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s93784 r8192 d20904 u524288
pcpu-alloc: s93784 r8192 d20904 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 766650
Kernel command line: ro root=UUID=d10fe8db-e7d4-4b42-b265-0109a3f3eedf rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 3005840k/5242880k available (5164k kernel code, 2098052k absent, 137992k reserved, 3193k data, 732k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2133.597 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4267.19 BogoMIPS (lpj=2133597)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 16375 entries in 65 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
Testing tracer nop: PASSED
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4266.58 BogoMIPS (lpj=2133291)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (8533.77 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
khelper used greatest stack depth: 5640 bytes left
gcov: version magic: 0x34303352
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: Enumerating devices from [\]
ACPI Warning: Incorrect checksum in table [OEMB] - E2, should be D9 (20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xdc00-0xdc1f]
pci 0000:00:1a.1: reg 20 io port: [0xe000-0xe01f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebf8000-0xfebfbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xd480-0xd49f]
pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:1d.2: reg 20 io port: [0xd880-0xd89f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebff800-0xfebffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: reg 10 io port: [0xec00-0xec07]
pci 0000:00:1f.2: reg 14 io port: [0xe880-0xe883]
pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807]
pci 0000:00:1f.2: reg 1c io port: [0xe480-0xe483]
pci 0000:00:1f.2: reg 20 io port: [0xe400-0xe40f]
pci 0000:00:1f.2: reg 24 io port: [0xe080-0xe08f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:00:1f.5: reg 10 io port: [0xd400-0xd407]
pci 0000:00:1f.5: reg 14 io port: [0xd080-0xd083]
pci 0000:00:1f.5: reg 18 io port: [0xd000-0xd007]
pci 0000:00:1f.5: reg 1c io port: [0xcc00-0xcc03]
pci 0000:00:1f.5: reg 20 io port: [0xc880-0xc88f]
pci 0000:00:1f.5: reg 24 io port: [0xc800-0xc80f]
pci 0000:00:1f.5: PME# supported from D3hot
pci 0000:00:1f.5: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
pci 0000:01:00.0: reg 24 io port: [0x9c00-0x9c7f]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe7e0000-0xfe7fffff]
pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf8700000-0xfe7fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xbfe00000-0xdfdfffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff]
pci 0000:03:00.0: reg 24 32bit mmio: [0xfe9fe000-0xfe9fffff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfe9e0000-0xfe9effff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: reg 10 io port: [0xbc00-0xbc07]
pci 0000:03:00.1: reg 14 io port: [0xb880-0xb883]
pci 0000:03:00.1: reg 18 io port: [0xb800-0xb807]
pci 0000:03:00.1: reg 1c io port: [0xb480-0xb483]
pci 0000:03:00.1: reg 20 io port: [0xb400-0xb40f]
pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff]
pci 0000:02:00.0: reg 18 io port: [0xa800-0xa8ff]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfe8c0000-0xfe8dffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xa000-0xafff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
pci 0000:05:03.0: reg 10 32bit mmio: [0xfeaff800-0xfeafffff]
pci 0000:05:03.0: reg 14 32bit mmio: [0xfeaf8000-0xfeafbfff]
pci 0000:05:03.0: supports D1 D2
pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:05:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:08: ioport range 0x290-0x297 has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x800-0x87f has been reserved
system 00:09: ioport range 0x480-0x4bf has been reserved
system 00:09: iomem range 0xffafe000-0xffb0cbff could not be reserved
system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:09: iomem range 0xfff00000-0xfffffffe has been reserved
system 00:09: iomem range 0xfebfe000-0xfebfec00 has been reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0xc0000-0xcffff has been reserved
system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x9000-0x9fff
pci 0000:00:01.0: MEM window: 0xf8700000-0xfe7fffff
pci 0000:00:01.0: PREFETCH window: 0x000000bfe00000-0x000000dfdfffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0: IO window: 0x1000-0x1fff
pci 0000:00:1c.0: MEM window: 0x80000000-0x803fffff
pci 0000:00:1c.0: PREFETCH window: 0x000000dfe00000-0x000000dfefffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.4: IO window: 0xb000-0xbfff
pci 0000:00:1c.4: MEM window: 0xfe900000-0xfe9fffff
pci 0000:00:1c.4: PREFETCH window: 0x00000080400000-0x000000805fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.5: IO window: 0xa000-0xafff
pci 0000:00:1c.5: MEM window: 0xfe800000-0xfe8fffff
pci 0000:00:1c.5: PREFETCH window: 0x00000080600000-0x000000807fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
pci_bus 0000:01: resource 1 mem: [0xf8700000-0xfe7fffff]
pci_bus 0000:01: resource 2 pref mem [0xbfe00000-0xdfdfffff]
pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:04: resource 1 mem: [0x80000000-0x803fffff]
pci_bus 0000:04: resource 2 pref mem [0xdfe00000-0xdfefffff]
pci_bus 0000:03: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:03: resource 1 mem: [0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 2 pref mem [0x80400000-0x805fffff]
pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff]
pci_bus 0000:02: resource 2 pref mem [0x80600000-0x807fffff]
pci_bus 0000:05: resource 1 mem: [0xfea00000-0xfeafffff]
pci_bus 0000:05: resource 3 io: [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
debug: unmapping init memory ffff880037c6d000..ffff880037ff0000
cpu0(4) debug files 151
cpu1(4) debug files 151
cpu2(4) debug files 3
cpu3(4) debug files 3
audit: initializing netlink socket (disabled)
type=2000 audit(1254560543.272:1): initialized
Testing tracer sched_switch: PASSED
Testing tracer function: PASSED
Testing dynamic ftrace: PASSED
Testing tracer function_graph: PASSED
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 5872
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: SSDT 000000007ff9e0c0 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113)
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 000000007ff9e290 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
processor LNXCPU:01: registered as cooling_device1
XENFS: not registering filesystem on non-xen platform
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
kgdb: Registered I/O driver kgdbts.
kgdb: Unregistered I/O driver kgdbts, debugger disabled.
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver
jmicron 0000:03:00.1: IDE controller (0x197b:0x2363 rev 0x02)
pci 0000:03:00.1: enabling device (0000 -> 0001)
pci 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
jmicron 0000:03:00.1: 100% native mode on irq 17
pci 0000:03:00.1: setting latency timer to 64
ide0: BM-DMA at 0xb400-0xb407
ide1: BM-DMA at 0xb408-0xb40f
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GSA-H44N, ATAPI CD/DVD-ROM drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
Probing IDE interface ide1...
ide0 at 0xbc00-0xbc07,0xb882 on irq 17
ide1 at 0xb800-0xb807,0xb482 on irq 17
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide2...
ide2: no devices on the port
ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide3...
ide3: no devices on the port
ide3 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
Running tests on trace events:
Testing event kfree_skb: OK
Testing event skb_copy_datagram_iovec: OK
Testing event block_rq_abort:
input: AT Translated Set 2 keyboard as /class/input/input1
OK
Testing event block_rq_insert: OK
Testing event block_rq_issue: OK
Testing event block_rq_requeue: OK
Testing event block_rq_complete: OK
Testing event block_bio_bounce: OK
Testing event block_bio_complete: OK
Testing event block_bio_backmerge: OK
Testing event block_bio_frontmerge: OK
Testing event block_bio_queue: OK
Testing event block_getrq: OK
Testing event block_sleeprq: OK
Testing event block_plug: OK
Testing event block_unplug_timer: OK
Testing event block_unplug_io: OK
Testing event block_split: OK
Testing event block_remap: OK
Testing event kmalloc: OK
Testing event kmem_cache_alloc: OK
Testing event kmalloc_node: OK
Testing event kmem_cache_alloc_node: OK
Testing event kfree: OK
Testing event kmem_cache_free: OK
Testing event mm_page_free_direct: OK
Testing event mm_pagevec_free: OK
Testing event mm_page_alloc: OK
Testing event mm_page_alloc_zone_locked: OK
Testing event mm_page_pcpu_drain: OK
Testing event mm_page_alloc_extfrag: OK
Testing event power_start: OK
Testing event power_end: OK
Testing event power_frequency: OK
Testing event module_load: OK
Testing event module_free: OK
Testing event module_get: OK
Testing event module_put: OK
Testing event module_request: OK
Testing event workqueue_insertion: OK
Testing event workqueue_execution: OK
Testing event workqueue_creation: OK
Testing event workqueue_destruction: OK
Testing event timer_init: OK
Testing event timer_start: OK
Testing event timer_expire_entry: OK
Testing event timer_expire_exit: OK
Testing event timer_cancel: OK
Testing event hrtimer_init: OK
Testing event hrtimer_start: OK
Testing event hrtimer_expire_entry: OK
Testing event hrtimer_expire_exit: OK
Testing event hrtimer_cancel: OK
Testing event itimer_state: OK
Testing event itimer_expire: OK
Testing event irq_handler_entry: OK
Testing event irq_handler_exit: OK
Testing event softirq_entry: OK
Testing event softirq_exit: OK
Testing event sched_kthread_stop: OK
Testing event sched_kthread_stop_ret: OK
Testing event sched_wait_task: OK
Testing event sched_wakeup: OK
Testing event sched_wakeup_new: OK
Testing event sched_switch: OK
Testing event sched_migrate_task: OK
Testing event sched_process_free: OK
Testing event sched_process_exit: OK
Testing event sched_process_wait: OK
Testing event sched_process_fork: OK
Testing event sched_signal_send: OK
Testing event sched_stat_wait: OK
Testing event sched_stat_runtime: OK
Testing event sched_stat_sleep: OK
Testing event sched_stat_iowait: OK
Running tests on trace event systems:
Testing event system skb: OK
Testing event system block: OK
Testing event system kmem: OK
Testing event system power: OK
Testing event system module: OK
Testing event system workqueue: OK
Testing event system timer: OK
Testing event system irq: OK
Testing event system sched: OK
Testing event system syscalls: OK
Running tests on all trace events:
Testing all events: OK
Running tests again, along with the function tracer
Running tests on trace events:
Testing event kfree_skb: OK
Testing event skb_copy_datagram_iovec: OK
Testing event block_rq_abort: OK
Testing event block_rq_insert: OK
Testing event block_rq_issue: OK
Testing event block_rq_requeue: OK
Testing event block_rq_complete: OK
Testing event block_bio_bounce: OK
Testing event block_bio_complete: OK
Testing event block_bio_backmerge: OK
Testing event block_bio_frontmerge: OK
Testing event block_bio_queue: OK
Testing event block_getrq: OK
Testing event block_sleeprq: OK
Testing event block_plug: OK
Testing event block_unplug_timer: OK
Testing event block_unplug_io: OK
Testing event block_split: OK
Testing event block_remap: OK
Testing event kmalloc: OK
Testing event kmem_cache_alloc: OK
Testing event kmalloc_node: OK
Testing event kmem_cache_alloc_node: OK
Testing event kfree: OK
Testing event kmem_cache_free: OK
Testing event mm_page_free_direct: OK
Testing event mm_pagevec_free: OK
Testing event mm_page_alloc: OK
Testing event mm_page_alloc_zone_locked: OK
Testing event mm_page_pcpu_drain: OK
Testing event mm_page_alloc_extfrag: OK
Testing event power_start: OK
Testing event power_end: OK
Testing event power_frequency: OK
Testing event module_load: OK
Testing event module_free: OK
Testing event module_get: OK
Testing event module_put: OK
Testing event module_request: OK
Testing event workqueue_insertion: OK
Testing event workqueue_execution: OK
Testing event workqueue_creation: OK
Testing event workqueue_destruction: OK
Testing event timer_init: OK
Testing event timer_start: OK
Testing event timer_expire_entry: OK
Testing event timer_expire_exit: OK
Testing event timer_cancel: OK
Testing event hrtimer_init: OK
Testing event hrtimer_start: OK
Testing event hrtimer_expire_entry: OK
Testing event hrtimer_expire_exit: OK
Testing event hrtimer_cancel: OK
Testing event itimer_state: OK
Testing event itimer_expire: OK
Testing event irq_handler_entry: OK
Testing event irq_handler_exit: OK
Testing event softirq_entry: OK
Testing event softirq_exit: OK
Testing event sched_kthread_stop: OK
Testing event sched_kthread_stop_ret: OK
Testing event sched_wait_task: OK
Testing event sched_wakeup: OK
Testing event sched_wakeup_new: OK
Testing event sched_switch: OK
Testing event sched_migrate_task: OK
Testing event sched_process_free: OK
Testing event sched_process_exit: OK
Testing event sched_process_wait: OK
Testing event sched_process_fork: OK
Testing event sched_signal_send: OK
Testing event sched_stat_wait:
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
OK
Testing event sched_stat_runtime: OK
Testing event sched_stat_sleep: OK
Testing event sched_stat_iowait: OK
Running tests on trace event systems:
Testing event system skb: OK
Testing event system block: OK
Testing event system kmem: OK
Testing event system power: OK
Testing event system module: OK
Testing event system workqueue: OK
Testing event system timer: OK
Testing event system irq: OK
Testing event system sched: OK
Testing event system syscalls: OK
Running tests on all trace events:
Testing all events: OK
debug: unmapping init memory ffffffff8182b000..ffffffff818e2000
Write protecting the kernel read-only data: 7396k
console_init used greatest stack depth: 5600 bytes left
modprobe used greatest stack depth: 5376 bytes left
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
modprobe used greatest stack depth: 4880 bytes left
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
modprobe used greatest stack depth: 4704 bytes left
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
ata2: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19
ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
scsi 2:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sda1 sda2 sda3 sda4 < sdb6 sda5 sdb7 sda6 sdb8 sda7 sdb9 >
sd 2:0:0:0: [sdb] Attached SCSI disk
sda8 sda9 >
sd 1:0:0:0: [sda] Attached SCSI disk
modprobe used greatest stack depth: 4680 bytes left
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1254560548.812:2): selinux=0 auid=4294967295 ses=4294967295
uname used greatest stack depth: 4624 bytes left
awk used greatest stack depth: 4112 bytes left
udevd version 127 started
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i801_smbus: probe of 0000:00:1f.3 failed with error -16
ohci1394 0000:05:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
sky2 driver version 1.25
sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
sky2 0000:02:00.0: irq 28 for MSI/MSI-X
sky2 eth0: addr 00:18:f3:b4:7e:ff
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8]
ahci 0000:03:00.0: version 3.0
ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi4 : ahci
scsi5 : ahci
ata5: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 16
ata6: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe180 irq 16
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
input: Power Button as /class/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /class/input/input4
ACPI: Power Button [PWRF]
gzip used greatest stack depth: 3776 bytes left
iTCO_vendor_support: vendor-support=0
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: PC Speaker as /class/input/input5
ide-cd driver 5.00
ide-cd: hda: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000f5cea6]
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.1.0 loaded
EXT3 FS on sdb8, internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sdb2, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sdb7, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sdb9, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
fuse init (API version 7.13)
Adding 4192924k swap on /dev/sda7. Priority:-1 extents:1 across:4192924k
microcode: CPU0 sig=0x6f6, pf=0x1, revision=0x44
platform microcode: firmware: requesting intel-ucode/06-0f-06
microcode: CPU1 sig=0x6f6, pf=0x1, revision=0x44
platform microcode: firmware: requesting intel-ucode/06-0f-06
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
microcode: CPU0 updated to revision 0xcb, date = 2007-09-16
microcode: CPU1 updated to revision 0xcb, date = 2007-09-16
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
virbr0: starting userspace STP failed, starting kernel STP
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
mtrr: base(0xc0000000) is not aligned on a size(0xff00000) boundary
virbr0: no IPv6 routers present
eth0: no IPv6 routers present
[-- Attachment #3: dmesg_2.6.32-rc2_problem_sdb --]
[-- Type: application/octet-stream, Size: 38219 bytes --]
Linux version 2.6.32-rc2 (root@localhost.localdomain) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Fri Oct 2 14:24:58 EDT 2009
Command line: ro root=UUID=d10fe8db-e7d4-4b42-b265-0109a3f3eedf rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 080000000 mask F80000000 uncachable
1 base 000000000 mask F00000000 write-back
2 base 100000000 mask FC0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7ff90 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007ff90000
0000000000 - 007ff90000 page 4k
kernel direct mapping tables up to 7ff90000 @ 100000-503000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 4k
kernel direct mapping tables up to 140000000 @ 501000-f07000
RAMDISK: 37c6d000 - 37fefc3c
ACPI: RSDP 00000000000fae40 00014 (v00 ACPIAM)
ACPI: RSDT 000000007ff90000 0003C (v01 ÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿ 01000722 MSFT 00000097)
ACPI: FACP 000000007ff90200 00084 (v02 MSTEST OEMFACP 01000722 MSFT 00000097)
ACPI: DSDT 000000007ff905c0 08E63 (v01 A0667 A0667000 00000000 INTL 20060113)
ACPI: FACS 000000007ff9e000 00040
ACPI: APIC 000000007ff90390 0006C (v01 MSTEST OEMAPIC 01000722 MSFT 00000097)
ACPI: MCFG 000000007ff90400 0003C (v01 MSTEST OEMMCFG 01000722 MSFT 00000097)
ACPI: SLIC 000000007ff90440 00176 (v01 ÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿ 01000722 MSFT 00000097)
ACPI: OEMB 000000007ff9e040 0007B (v01 MSTEST AMI_OEM 01000722 MSFT 00000097)
ACPI: HPET 000000007ff99430 00038 (v01 MSTEST OEMHPET 01000722 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
(8 early reservations) ==> bootmem [0000000000 - 0140000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001c273c0] TEXT DATA BSS ==> [0001000000 - 0001c273c0]
#3 [0037c6d000 - 0037fefc3c] RAMDISK ==> [0037c6d000 - 0037fefc3c]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0001c28000 - 0001c28290] BRK ==> [0001c28000 - 0001c28290]
#6 [0000100000 - 0000501000] PGTABLE ==> [0000100000 - 0000501000]
#7 [0000501000 - 0000702000] PGTABLE ==> [0000501000 - 0000702000]
found SMP MP-table at [ffff8800000ff780] ff780
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002affffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007ff90
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 786207
DMA zone: 56 pages used for memmap
DMA zone: 1637 pages reserved
DMA zone: 2290 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 505800 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a202 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s93784 r8192 d20904 u524288
pcpu-alloc: s93784 r8192 d20904 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 766650
Kernel command line: ro root=UUID=d10fe8db-e7d4-4b42-b265-0109a3f3eedf rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 3005840k/5242880k available (5164k kernel code, 2098052k absent, 137992k reserved, 3193k data, 732k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2133.340 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.68 BogoMIPS (lpj=2133340)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 16375 entries in 65 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
Testing tracer nop: PASSED
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4266.54 BogoMIPS (lpj=2133271)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (8533.22 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
khelper used greatest stack depth: 5640 bytes left
gcov: version magic: 0x34303352
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: Enumerating devices from [\]
ACPI Warning: Incorrect checksum in table [OEMB] - E2, should be D9 (20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xdc00-0xdc1f]
pci 0000:00:1a.1: reg 20 io port: [0xe000-0xe01f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebf8000-0xfebfbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xd480-0xd49f]
pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:1d.2: reg 20 io port: [0xd880-0xd89f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebff800-0xfebffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: reg 10 io port: [0xec00-0xec07]
pci 0000:00:1f.2: reg 14 io port: [0xe880-0xe883]
pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807]
pci 0000:00:1f.2: reg 1c io port: [0xe480-0xe483]
pci 0000:00:1f.2: reg 20 io port: [0xe400-0xe40f]
pci 0000:00:1f.2: reg 24 io port: [0xe080-0xe08f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:00:1f.5: reg 10 io port: [0xd400-0xd407]
pci 0000:00:1f.5: reg 14 io port: [0xd080-0xd083]
pci 0000:00:1f.5: reg 18 io port: [0xd000-0xd007]
pci 0000:00:1f.5: reg 1c io port: [0xcc00-0xcc03]
pci 0000:00:1f.5: reg 20 io port: [0xc880-0xc88f]
pci 0000:00:1f.5: reg 24 io port: [0xc800-0xc80f]
pci 0000:00:1f.5: PME# supported from D3hot
pci 0000:00:1f.5: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
pci 0000:01:00.0: reg 24 io port: [0x9c00-0x9c7f]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe7e0000-0xfe7fffff]
pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf8700000-0xfe7fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xbfe00000-0xdfdfffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff]
pci 0000:03:00.0: reg 24 32bit mmio: [0xfe9fe000-0xfe9fffff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfe9e0000-0xfe9effff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: reg 10 io port: [0xbc00-0xbc07]
pci 0000:03:00.1: reg 14 io port: [0xb880-0xb883]
pci 0000:03:00.1: reg 18 io port: [0xb800-0xb807]
pci 0000:03:00.1: reg 1c io port: [0xb480-0xb483]
pci 0000:03:00.1: reg 20 io port: [0xb400-0xb40f]
pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff]
pci 0000:02:00.0: reg 18 io port: [0xa800-0xa8ff]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfe8c0000-0xfe8dffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xa000-0xafff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
pci 0000:05:03.0: reg 10 32bit mmio: [0xfeaff800-0xfeafffff]
pci 0000:05:03.0: reg 14 32bit mmio: [0xfeaf8000-0xfeafbfff]
pci 0000:05:03.0: supports D1 D2
pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:05:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:08: ioport range 0x290-0x297 has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x800-0x87f has been reserved
system 00:09: ioport range 0x480-0x4bf has been reserved
system 00:09: iomem range 0xffafe000-0xffb0cbff could not be reserved
system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:09: iomem range 0xfff00000-0xfffffffe has been reserved
system 00:09: iomem range 0xfebfe000-0xfebfec00 has been reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0xc0000-0xcffff has been reserved
system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x9000-0x9fff
pci 0000:00:01.0: MEM window: 0xf8700000-0xfe7fffff
pci 0000:00:01.0: PREFETCH window: 0x000000bfe00000-0x000000dfdfffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0: IO window: 0x1000-0x1fff
pci 0000:00:1c.0: MEM window: 0x80000000-0x803fffff
pci 0000:00:1c.0: PREFETCH window: 0x000000dfe00000-0x000000dfefffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.4: IO window: 0xb000-0xbfff
pci 0000:00:1c.4: MEM window: 0xfe900000-0xfe9fffff
pci 0000:00:1c.4: PREFETCH window: 0x00000080400000-0x000000805fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.5: IO window: 0xa000-0xafff
pci 0000:00:1c.5: MEM window: 0xfe800000-0xfe8fffff
pci 0000:00:1c.5: PREFETCH window: 0x00000080600000-0x000000807fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
pci_bus 0000:01: resource 1 mem: [0xf8700000-0xfe7fffff]
pci_bus 0000:01: resource 2 pref mem [0xbfe00000-0xdfdfffff]
pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:04: resource 1 mem: [0x80000000-0x803fffff]
pci_bus 0000:04: resource 2 pref mem [0xdfe00000-0xdfefffff]
pci_bus 0000:03: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:03: resource 1 mem: [0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 2 pref mem [0x80400000-0x805fffff]
pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff]
pci_bus 0000:02: resource 2 pref mem [0x80600000-0x807fffff]
pci_bus 0000:05: resource 1 mem: [0xfea00000-0xfeafffff]
pci_bus 0000:05: resource 3 io: [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
debug: unmapping init memory ffff880037c6d000..ffff880037ff0000
cpu0(4) debug files 151
cpu1(4) debug files 151
cpu2(4) debug files 3
cpu3(4) debug files 3
audit: initializing netlink socket (disabled)
type=2000 audit(1254512841.273:1): initialized
Testing tracer sched_switch: PASSED
Testing tracer function: PASSED
Testing dynamic ftrace: PASSED
Testing tracer function_graph: PASSED
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 5872
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: SSDT 000000007ff9e0c0 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113)
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 000000007ff9e290 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
processor LNXCPU:01: registered as cooling_device1
XENFS: not registering filesystem on non-xen platform
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
kgdb: Registered I/O driver kgdbts.
kgdb: Unregistered I/O driver kgdbts, debugger disabled.
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver
jmicron 0000:03:00.1: IDE controller (0x197b:0x2363 rev 0x02)
pci 0000:03:00.1: enabling device (0000 -> 0001)
pci 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
jmicron 0000:03:00.1: 100% native mode on irq 17
pci 0000:03:00.1: setting latency timer to 64
ide0: BM-DMA at 0xb400-0xb407
ide1: BM-DMA at 0xb408-0xb40f
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GSA-H44N, ATAPI CD/DVD-ROM drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
Probing IDE interface ide1...
ide0 at 0xbc00-0xbc07,0xb882 on irq 17
ide1 at 0xb800-0xb807,0xb482 on irq 17
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide2...
ide2: no devices on the port
ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide3...
ide3: no devices on the port
ide3 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
Running tests on trace events:
Testing event kfree_skb: OK
Testing event skb_copy_datagram_iovec:
input: AT Translated Set 2 keyboard as /class/input/input1
OK
Testing event block_rq_abort: OK
Testing event block_rq_insert: OK
Testing event block_rq_issue: OK
Testing event block_rq_requeue: OK
Testing event block_rq_complete: OK
Testing event block_bio_bounce: OK
Testing event block_bio_complete: OK
Testing event block_bio_backmerge: OK
Testing event block_bio_frontmerge: OK
Testing event block_bio_queue: OK
Testing event block_getrq: OK
Testing event block_sleeprq: OK
Testing event block_plug: OK
Testing event block_unplug_timer: OK
Testing event block_unplug_io: OK
Testing event block_split: OK
Testing event block_remap: OK
Testing event kmalloc: OK
Testing event kmem_cache_alloc: OK
Testing event kmalloc_node: OK
Testing event kmem_cache_alloc_node: OK
Testing event kfree: OK
Testing event kmem_cache_free: OK
Testing event mm_page_free_direct: OK
Testing event mm_pagevec_free: OK
Testing event mm_page_alloc: OK
Testing event mm_page_alloc_zone_locked: OK
Testing event mm_page_pcpu_drain: OK
Testing event mm_page_alloc_extfrag: OK
Testing event power_start: OK
Testing event power_end: OK
Testing event power_frequency: OK
Testing event module_load: OK
Testing event module_free: OK
Testing event module_get: OK
Testing event module_put: OK
Testing event module_request: OK
Testing event workqueue_insertion: OK
Testing event workqueue_execution: OK
Testing event workqueue_creation: OK
Testing event workqueue_destruction: OK
Testing event timer_init: OK
Testing event timer_start: OK
Testing event timer_expire_entry: OK
Testing event timer_expire_exit: OK
Testing event timer_cancel: OK
Testing event hrtimer_init: OK
Testing event hrtimer_start: OK
Testing event hrtimer_expire_entry: OK
Testing event hrtimer_expire_exit: OK
Testing event hrtimer_cancel: OK
Testing event itimer_state: OK
Testing event itimer_expire: OK
Testing event irq_handler_entry: OK
Testing event irq_handler_exit: OK
Testing event softirq_entry: OK
Testing event softirq_exit: OK
Testing event sched_kthread_stop: OK
Testing event sched_kthread_stop_ret: OK
Testing event sched_wait_task: OK
Testing event sched_wakeup: OK
Testing event sched_wakeup_new: OK
Testing event sched_switch: OK
Testing event sched_migrate_task: OK
Testing event sched_process_free: OK
Testing event sched_process_exit: OK
Testing event sched_process_wait: OK
Testing event sched_process_fork: OK
Testing event sched_signal_send: OK
Testing event sched_stat_wait: OK
Testing event sched_stat_runtime: OK
Testing event sched_stat_sleep: OK
Testing event sched_stat_iowait: OK
Running tests on trace event systems:
Testing event system skb: OK
Testing event system block: OK
Testing event system kmem: OK
Testing event system power: OK
Testing event system module: OK
Testing event system workqueue: OK
Testing event system timer: OK
Testing event system irq: OK
Testing event system sched: OK
Testing event system syscalls: OK
Running tests on all trace events:
Testing all events: OK
Running tests again, along with the function tracer
Running tests on trace events:
Testing event kfree_skb: OK
Testing event skb_copy_datagram_iovec: OK
Testing event block_rq_abort: OK
Testing event block_rq_insert: OK
Testing event block_rq_issue: OK
Testing event block_rq_requeue: OK
Testing event block_rq_complete: OK
Testing event block_bio_bounce: OK
Testing event block_bio_complete: OK
Testing event block_bio_backmerge: OK
Testing event block_bio_frontmerge: OK
Testing event block_bio_queue: OK
Testing event block_getrq: OK
Testing event block_sleeprq: OK
Testing event block_plug: OK
Testing event block_unplug_timer: OK
Testing event block_unplug_io: OK
Testing event block_split: OK
Testing event block_remap: OK
Testing event kmalloc: OK
Testing event kmem_cache_alloc: OK
Testing event kmalloc_node: OK
Testing event kmem_cache_alloc_node: OK
Testing event kfree: OK
Testing event kmem_cache_free: OK
Testing event mm_page_free_direct: OK
Testing event mm_pagevec_free: OK
Testing event mm_page_alloc: OK
Testing event mm_page_alloc_zone_locked: OK
Testing event mm_page_pcpu_drain: OK
Testing event mm_page_alloc_extfrag: OK
Testing event power_start: OK
Testing event power_end: OK
Testing event power_frequency: OK
Testing event module_load: OK
Testing event module_free: OK
Testing event module_get: OK
Testing event module_put: OK
Testing event module_request: OK
Testing event workqueue_insertion: OK
Testing event workqueue_execution: OK
Testing event workqueue_creation: OK
Testing event workqueue_destruction: OK
Testing event timer_init: OK
Testing event timer_start: OK
Testing event timer_expire_entry: OK
Testing event timer_expire_exit: OK
Testing event timer_cancel: OK
Testing event hrtimer_init: OK
Testing event hrtimer_start: OK
Testing event hrtimer_expire_entry: OK
Testing event hrtimer_expire_exit: OK
Testing event hrtimer_cancel: OK
Testing event itimer_state: OK
Testing event itimer_expire: OK
Testing event irq_handler_entry: OK
Testing event irq_handler_exit: OK
Testing event softirq_entry: OK
Testing event softirq_exit: OK
Testing event sched_kthread_stop: OK
Testing event sched_kthread_stop_ret: OK
Testing event sched_wait_task: OK
Testing event sched_wakeup: OK
Testing event sched_wakeup_new: OK
Testing event sched_switch: OK
Testing event sched_migrate_task: OK
Testing event sched_process_free: OK
Testing event sched_process_exit: OK
Testing event sched_process_wait: OK
Testing event sched_process_fork: OK
Testing event sched_signal_send:
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
OK
Testing event sched_stat_wait: OK
Testing event sched_stat_runtime: OK
Testing event sched_stat_sleep: OK
Testing event sched_stat_iowait: OK
Running tests on trace event systems:
Testing event system skb: OK
Testing event system block: OK
Testing event system kmem: OK
Testing event system power: OK
Testing event system module: OK
Testing event system workqueue: OK
Testing event system timer: OK
Testing event system irq: OK
Testing event system sched: OK
Testing event system syscalls: OK
Running tests on all trace events:
Testing all events: OK
debug: unmapping init memory ffffffff8182b000..ffffffff818e2000
Write protecting the kernel read-only data: 7396k
console_init used greatest stack depth: 5600 bytes left
modprobe used greatest stack depth: 5376 bytes left
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
modprobe used greatest stack depth: 4736 bytes left
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
ata2: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19
ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
sd 2:0:0:0: [sda] Attached SCSI disk
modprobe used greatest stack depth: 4680 bytes left
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1254512846.047:2): selinux=0 auid=4294967295 ses=4294967295
awk used greatest stack depth: 4112 bytes left
udevd version 127 started
sd 2:0:0:0: Attached scsi generic sg0 type 0
sky2 driver version 1.25
sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
sky2 0000:02:00.0: irq 28 for MSI/MSI-X
sky2 eth0: addr 00:18:f3:b4:7e:ff
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i801_smbus: probe of 0000:00:1f.3 failed with error -16
ohci1394 0000:05:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
input: PC Speaker as /class/input/input3
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8]
ide-cd driver 5.00
ide-cd: hda: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
input: Power Button as /class/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /class/input/input5
ACPI: Power Button [PWRF]
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ahci 0000:03:00.0: version 3.0
ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi4 : ahci
scsi5 : ahci
ata5: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 16
ata6: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe180 irq 16
gzip used greatest stack depth: 3952 bytes left
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000f5cea6]
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.1.0 loaded
EXT3 FS on sda8, internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Can't find ext3 filesystem on dev sda5.
fuse init (API version 7.13)
Unable to find swap-space signature
microcode: CPU0 sig=0x6f6, pf=0x1, revision=0x44
platform microcode: firmware: requesting intel-ucode/06-0f-06
microcode: CPU1 sig=0x6f6, pf=0x1, revision=0x44
platform microcode: firmware: requesting intel-ucode/06-0f-06
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
microcode: CPU0 updated to revision 0xcb, date = 2007-09-16
microcode: CPU1 updated to revision 0xcb, date = 2007-09-16
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetworkManager used greatest stack depth: 3776 bytes left
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
virbr0: starting userspace STP failed, starting kernel STP
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
mtrr: base(0xc0000000) is not aligned on a size(0xff00000) boundary
VFS: Can't find ext3 filesystem on dev sda5.
virbr0: no IPv6 routers present
eth0: no IPv6 routers present
^ permalink raw reply [flat|nested] 4+ messages in thread