* [PATCH v3 2/2] powerpc, video: add SM501 support for charon board.
[not found] <1291451028-22532-2-git-send-email-hs@denx.de>
@ 2010-12-11 6:31 ` Heiko Schocher
2011-01-24 9:57 ` [PATCH 4/4 v4] " Heiko Schocher
2011-01-25 6:45 ` [PATCH 4/4 v5] " Heiko Schocher
2 siblings, 0 replies; 5+ messages in thread
From: Heiko Schocher @ 2010-12-11 6:31 UTC (permalink / raw)
To: linuxppc-dev
Cc: Heiko Schocher, linux-fbdev, devicetree-discuss, Ben Dooks,
Vincent Sanders, Samuel Ortiz, linux-kernel
Signed-off-by: Heiko Schocher <hs@denx.de>
cc: linux-fbdev@vger.kernel.org
cc: devicetree-discuss@ozlabs.org
cc: Ben Dooks <ben@simtec.co.uk>
cc: Vincent Sanders <vince@simtec.co.uk>
cc: Samuel Ortiz <sameo@linux.intel.com>
cc: linux-kernel@vger.kernel.org
---
- based against 2.6.37-rc4
./scripts/checkpatch.pl 0003-powerpc-video-add-SM501-support-for-charon-board.patch
total: 0 errors, 0 warnings, 21 lines checked
0003-powerpc-video-add-SM501-support-for-charon-board.patch has no obvious style problems and is ready for submission.
- changes since v1:
- no board specific defconfig file for mpc52xx based boards as suggested
from Wolfram Sang
- changes since v2:
add Ben Dooks, Vincent Sanders and Samuel Ortiz and lkml to cc, as
suggested from Paul Mundt.
arch/powerpc/boot/dts/charon.dts | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts
index 9776889..d9af022 100644
--- a/arch/powerpc/boot/dts/charon.dts
+++ b/arch/powerpc/boot/dts/charon.dts
@@ -186,6 +186,7 @@
#address-cells = <2>;
#size-cells = <1>;
ranges = < 0 0 0xfc000000 0x02000000
+ 1 0 0xe0000000 0x04000000 // CS1 range, SM501
3 0 0xe8000000 0x00080000>;
flash@0,0 {
@@ -197,6 +198,14 @@
#address-cells = <1>;
};
+ display@1,0 {
+ compatible = "smi,sm501";
+ reg = <1 0x00000000 0x00800000
+ 1 0x03e00000 0x00200000>;
+ mode = "640x480-32@60";
+ interrupts = <1 1 3>;
+ };
+
mram0@3,0 {
compatible = "mtd-ram";
reg = <3 0x00000 0x80000>;
--
1.7.2.3
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 4/4 v4] powerpc, video: add SM501 support for charon board.
[not found] <1291451028-22532-2-git-send-email-hs@denx.de>
2010-12-11 6:31 ` [PATCH v3 2/2] powerpc, video: add SM501 support for charon board Heiko Schocher
@ 2011-01-24 9:57 ` Heiko Schocher
2011-01-25 6:45 ` [PATCH 4/4 v5] " Heiko Schocher
2 siblings, 0 replies; 5+ messages in thread
From: Heiko Schocher @ 2011-01-24 9:57 UTC (permalink / raw)
To: linuxppc-dev
Cc: Heiko Schocher, linux-fbdev, devicetree-discuss, Ben Dooks,
Vincent Sanders, Samuel Ortiz, linux-kernel
Signed-off-by: Heiko Schocher <hs@denx.de>
cc: linux-fbdev@vger.kernel.org
cc: devicetree-discuss@ozlabs.org
cc: Ben Dooks <ben@simtec.co.uk>
cc: Vincent Sanders <vince@simtec.co.uk>
cc: Samuel Ortiz <sameo@linux.intel.com>
cc: linux-kernel@vger.kernel.org
---
- changes since v1:
- no board specific defconfig file for mpc52xx based boards as suggested
from Wolfram Sang
- changes since v2:
add Ben Dooks, Vincent Sanders and Samuel Ortiz and lkml to cc, as
suggested from Paul Mundt.
- changes since v3:
- rebased against v2.6.38-rc2
./scripts/checkpatch.pl 0004-powerpc-video-add-SM501-support-for-charon-board.patch
total: 0 errors, 0 warnings, 22 lines checked
0004-powerpc-video-add-SM501-support-for-charon-board.patch has no obvious style problems and is ready for submission.
arch/powerpc/boot/dts/charon.dts | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts
index 9776889..0e00e50 100644
--- a/arch/powerpc/boot/dts/charon.dts
+++ b/arch/powerpc/boot/dts/charon.dts
@@ -186,6 +186,7 @@
#address-cells = <2>;
#size-cells = <1>;
ranges = < 0 0 0xfc000000 0x02000000
+ 1 0 0xe0000000 0x04000000 // CS1 range, SM501
3 0 0xe8000000 0x00080000>;
flash@0,0 {
@@ -197,6 +198,15 @@
#address-cells = <1>;
};
+ display@1,0 {
+ compatible = "smi,sm501";
+ reg = <1 0x00000000 0x00800000
+ 1 0x03e00000 0x00200000>;
+ mode = "640x480-32@60";
+ interrupts = <1 1 3>;
+ little-endian;
+ };
+
mram0@3,0 {
compatible = "mtd-ram";
reg = <3 0x00000 0x80000>;
--
1.7.3.4
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 4/4 v5] powerpc, video: add SM501 support for charon board.
[not found] <1291451028-22532-2-git-send-email-hs@denx.de>
2010-12-11 6:31 ` [PATCH v3 2/2] powerpc, video: add SM501 support for charon board Heiko Schocher
2011-01-24 9:57 ` [PATCH 4/4 v4] " Heiko Schocher
@ 2011-01-25 6:45 ` Heiko Schocher
2011-01-25 6:49 ` Paul Mundt
2 siblings, 1 reply; 5+ messages in thread
From: Heiko Schocher @ 2011-01-25 6:45 UTC (permalink / raw)
To: linuxppc-dev
Cc: Heiko Schocher, linux-fbdev, devicetree-discuss, Ben Dooks,
Vincent Sanders, Samuel Ortiz, linux-kernel, Paul Mundt
Signed-off-by: Heiko Schocher <hs@denx.de>
cc: linux-fbdev@vger.kernel.org
cc: devicetree-discuss@ozlabs.org
cc: Ben Dooks <ben@simtec.co.uk>
cc: Vincent Sanders <vince@simtec.co.uk>
cc: Samuel Ortiz <sameo@linux.intel.com>
cc: linux-kernel@vger.kernel.org
cc: Paul Mundt <lethal@linux-sh.org>
---
- changes since v1:
- no board specific defconfig file for mpc52xx based boards as suggested
from Wolfram Sang
- changes since v2:
add Ben Dooks, Vincent Sanders and Samuel Ortiz and lkml to cc, as
suggested from Paul Mundt.
- changes since v3:
- rebased against v2.6.38-rc2
- changes since v4:
- added Paul Mundt to cc (Sorry forgot this in series v4)
./scripts/checkpatch.pl 0004-powerpc-video-add-SM501-support-for-charon-board.patch
total: 0 errors, 0 warnings, 22 lines checked
0004-powerpc-video-add-SM501-support-for-charon-board.patch has no obvious style problems and is ready for submission.
arch/powerpc/boot/dts/charon.dts | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts
index 9776889..0e00e50 100644
--- a/arch/powerpc/boot/dts/charon.dts
+++ b/arch/powerpc/boot/dts/charon.dts
@@ -186,6 +186,7 @@
#address-cells = <2>;
#size-cells = <1>;
ranges = < 0 0 0xfc000000 0x02000000
+ 1 0 0xe0000000 0x04000000 // CS1 range, SM501
3 0 0xe8000000 0x00080000>;
flash@0,0 {
@@ -197,6 +198,15 @@
#address-cells = <1>;
};
+ display@1,0 {
+ compatible = "smi,sm501";
+ reg = <1 0x00000000 0x00800000
+ 1 0x03e00000 0x00200000>;
+ mode = "640x480-32@60";
+ interrupts = <1 1 3>;
+ little-endian;
+ };
+
mram0@3,0 {
compatible = "mtd-ram";
reg = <3 0x00000 0x80000>;
--
1.7.3.4
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH 4/4 v5] powerpc, video: add SM501 support for charon board.
2011-01-25 6:45 ` [PATCH 4/4 v5] " Heiko Schocher
@ 2011-01-25 6:49 ` Paul Mundt
2011-01-25 7:07 ` Heiko Schocher
0 siblings, 1 reply; 5+ messages in thread
From: Paul Mundt @ 2011-01-25 6:49 UTC (permalink / raw)
To: Heiko Schocher
Cc: linuxppc-dev, linux-fbdev, devicetree-discuss, Ben Dooks,
Vincent Sanders, Samuel Ortiz, linux-kernel
On Tue, Jan 25, 2011 at 07:45:46AM +0100, Heiko Schocher wrote:
> @@ -197,6 +198,15 @@
> #address-cells = <1>;
> };
>
> + display@1,0 {
> + compatible = "smi,sm501";
> + reg = <1 0x00000000 0x00800000
> + 1 0x03e00000 0x00200000>;
> + mode = "640x480-32@60";
> + interrupts = <1 1 3>;
> + little-endian;
> + };
> +
The endian designation looks good, but it still doesn't explain why you
have a remaining CONFIG_PPC_MPC52xx ifdef encapsulating the property
check in the sm501fb patch. It shouldn't be needed at all. If the
platform supports OF then the property will need to be set one way or the
other, so there is no need for any board or CPU ifdeffery within the
driver itself.
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH 4/4 v5] powerpc, video: add SM501 support for charon board.
2011-01-25 6:49 ` Paul Mundt
@ 2011-01-25 7:07 ` Heiko Schocher
0 siblings, 0 replies; 5+ messages in thread
From: Heiko Schocher @ 2011-01-25 7:07 UTC (permalink / raw)
To: Paul Mundt
Cc: linuxppc-dev, linux-fbdev, devicetree-discuss, Ben Dooks,
Vincent Sanders, Samuel Ortiz, linux-kernel
Hello Paul,
Paul Mundt wrote:
> On Tue, Jan 25, 2011 at 07:45:46AM +0100, Heiko Schocher wrote:
>> @@ -197,6 +198,15 @@
>> #address-cells = <1>;
>> };
>>
>> + display@1,0 {
>> + compatible = "smi,sm501";
>> + reg = <1 0x00000000 0x00800000
>> + 1 0x03e00000 0x00200000>;
>> + mode = "640x480-32@60";
>> + interrupts = <1 1 3>;
>> + little-endian;
>> + };
>> +
>
> The endian designation looks good, but it still doesn't explain why you
> have a remaining CONFIG_PPC_MPC52xx ifdef encapsulating the property
> check in the sm501fb patch. It shouldn't be needed at all. If the
> platform supports OF then the property will need to be set one way or the
> other, so there is no need for any board or CPU ifdeffery within the
> driver itself.
Argh, of course you are right, thanks! I post an update for the
"sm501fb of support" patch.
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 5+ messages in thread