Re: [PATCH] platform/x86: int3472: Use actual clock frequency for DSM method

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

On Mon, 8 Dec 2025, Hao Yao wrote:

> Hi Bingbu,
> 
> On 12/5/25 18:10, Bingbu Cao wrote:
> > Hao,
> > 
> > Thanks for the patch.
> > 
> > On 12/5/25 5:51 PM, Hao Yao wrote:
> > > The third argument (args[2]) to the _DSM method was hardcoded to 1,
> > > which corresponds to 19.2MHz. However, this argument should reflect
> > > the actual clock frequency from the sensor's ACPI data.
> > > 
> > > According to the DSM specification:
> > > - 1 = 19.2MHz
> > > - 3 = 24MHz
> > > 
> > 
> > What are the value 0 and 2? I think there are other frequencies.
> 
> Seems 0 and 2 are reserved for future options, as I can't get the clock output
> by setting these values.

Hi,

This looks like useful information to add into the changelog itself so if 
somebody later wonders this same thing, they can get the information 
easily.

--
 i.

> Best Regards,
> Hao Yao
> 
> > 
> > > Read the frequency from clk->frequency and set the DSM argument
> > > accordingly, with 19.2MHz as the default for unsupported frequencies.
> > > 
> > > This ensures the sensor receives the correct clock frequency as
> > > specified in its ACPI configuration.
> > > 
> > > Signed-off-by: Hao Yao <hao.yao@intel.com>
> > > ---
> > >   .../x86/intel/int3472/clk_and_regulator.c     | 21 ++++++++++++++++++-
> > >   1 file changed, 20 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/platform/x86/intel/int3472/clk_and_regulator.c
> > > b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
> > > index 9e052b164a1a..0502876284ee 100644
> > > --- a/drivers/platform/x86/intel/int3472/clk_and_regulator.c
> > > +++ b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
> > > @@ -19,23 +19,42 @@ static const guid_t img_clk_guid =
> > >   	GUID_INIT(0x82c0d13a, 0x78c5, 0x4244,
> > >   		  0x9b, 0xb1, 0xeb, 0x8b, 0x53, 0x9a, 0x8d, 0x11);
> > >   +/*
> > > + * The PCH clock frequency argument to the _DSM method:
> > > + * PCH_CLK_FREQ_19M = 19.2MHz (default)
> > > + * PCH_CLK_FREQ_24M = 24MHz
> > > + */
> > > +#define PCH_CLK_FREQ_19M	1
> > 
> > I like 19P2MHZ.
> > 
> > > +#define PCH_CLK_FREQ_24M	3
> > > +
> > >   static void skl_int3472_enable_clk(struct int3472_clock *clk, int
> > > enable)
> > >   {
> > >   	struct int3472_discrete_device *int3472 = to_int3472_device(clk);
> > >   	union acpi_object args[3];
> > >   	union acpi_object argv4;
> > > +	u32 dsm_freq_arg;
> > >     	if (clk->ena_gpio) {
> > >   		gpiod_set_value_cansleep(clk->ena_gpio, enable);
> > >   		return;
> > >   	}
> > >   +	switch (clk->frequency) {
> > > +	case 24000000:
> > > +		dsm_freq_arg = PCH_CLK_FREQ_24M;
> > > +		break;
> > > +	case 19200000:
> > > +	default:
> > > +		dsm_freq_arg = PCH_CLK_FREQ_19M;
> > > +		break;
> > > +	}
> > > +
> > >   	args[0].integer.type = ACPI_TYPE_INTEGER;
> > >   	args[0].integer.value = clk->imgclk_index;
> > >   	args[1].integer.type = ACPI_TYPE_INTEGER;
> > >   	args[1].integer.value = enable;
> > >   	args[2].integer.type = ACPI_TYPE_INTEGER;
> > > -	args[2].integer.value = 1;
> > > +	args[2].integer.value = dsm_freq_arg;
> > >     	argv4.type = ACPI_TYPE_PACKAGE;
> > >   	argv4.package.count = 3;
> > > 
> > 
>