* [PATCH net-next v5 1/2] icmp: fix ICMP error source address when xfrm policy matches
[not found] <cover.1772101380.git.antony.antony@secunet.com>
@ 2026-02-26 10:27 ` Antony Antony
2026-02-26 16:18 ` David Ahern
2026-02-26 10:28 ` [PATCH net-next v5 2/2] selftests: net: add ICMP error source address test over xfrm tunnel Antony Antony
1 sibling, 1 reply; 3+ messages in thread
From: Antony Antony @ 2026-02-26 10:27 UTC (permalink / raw)
To: Antony Antony, Jakub Kicinski, Steffen Klassert, netdev
Cc: David S . Miller, David Ahern, Eric Dumazet, Paolo Abeni,
Herbert Xu, Shuah Khan, devel, Tobias Brunner, Simon Horman,
Sabrina Dubroca, stable+noautosel, linux-kernel
When an IPsec gateway generates an ICMP error (e.g., Destination Host
Unreachable), the source address incorrectly shows the unreachable
destination instead of the gateway's address. IPv6 behaves correctly.
Before fix:
ping 10.1.6.3
From 10.1.6.3 icmp_seq=1 Destination Host Unreachable
(wrong - 10.1.6.3 is the unreachable host)
After fix:
ping 10.1.6.3
From 10.1.5.2 icmp_seq=1 Destination Host Unreachable
(correct - 10.1.5.2 is the gateway)
The fix removes the memcpy that overwrote fl4 with fl4_dec after
xfrm_lookup(). A follow-up commit adds a selftest.
Fixes: 415b3334a21a ("icmp: Fix regression in nexthop resolution during replies.")
Cc: stable+noautosel@kernel.org # Avoid false positives in tests
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Acked-by: Tobias Brunner <tobias@strongswan.org>
---
net/ipv4/icmp.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 19c9c838967f..4bd421208ce0 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -569,7 +569,6 @@ static struct rtable *icmp_route_lookup(struct net *net, struct flowi4 *fl4,
rt2 = dst_rtable(dst2);
if (!IS_ERR(dst2)) {
dst_release(&rt->dst);
- memcpy(fl4, &fl4_dec, sizeof(*fl4));
rt = rt2;
} else if (PTR_ERR(dst2) == -EPERM) {
if (rt)
--
2.39.5
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH net-next v5 2/2] selftests: net: add ICMP error source address test over xfrm tunnel
[not found] <cover.1772101380.git.antony.antony@secunet.com>
2026-02-26 10:27 ` [PATCH net-next v5 1/2] icmp: fix ICMP error source address when xfrm policy matches Antony Antony
@ 2026-02-26 10:28 ` Antony Antony
1 sibling, 0 replies; 3+ messages in thread
From: Antony Antony @ 2026-02-26 10:28 UTC (permalink / raw)
To: Antony Antony, Jakub Kicinski, Steffen Klassert, netdev
Cc: David S . Miller, David Ahern, Eric Dumazet, Paolo Abeni,
Herbert Xu, Shuah Khan, devel, Tobias Brunner, Simon Horman,
Sabrina Dubroca, linux-kernel, linux-kselftest
Test that ICMP error messages generated by an IPsec gateway use
the correct source address (the gateway's address, not the
unreachable destination).
Signed-off-by: Antony Antony <antony.antony@secunet.com>
---
v1->v2 : add kernel selftest script, Jakub's feedbak
v2->v3 : fix test script. The IFS, space, got mangled.
v3->v4 : added MTU tests
- fix test script based on reviews
https://lore.kernel.org/all/f820e0e9f80b1467f97d1408f00f61b1fdb1b986.1769595011.git.antony.antony@secunet.com/
v4->v5 : fix shellcheck reported warnings and errors, Jakub's feedbak
---
tools/testing/selftests/net/Makefile | 1 +
tools/testing/selftests/net/xfrm_state.sh | 613 ++++++++++++++++++++++
2 files changed, 614 insertions(+)
create mode 100755 tools/testing/selftests/net/xfrm_state.sh
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index afdea6d95bde..c8f4d5e19d19 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -119,6 +119,7 @@ TEST_PROGS := \
vrf_route_leaking.sh \
vrf_strict_mode_test.sh \
xfrm_policy.sh \
+ xfrm_state.sh \
# end of TEST_PROGS
TEST_PROGS_EXTENDED := \
diff --git a/tools/testing/selftests/net/xfrm_state.sh b/tools/testing/selftests/net/xfrm_state.sh
new file mode 100755
index 000000000000..f6c54a6496d7
--- /dev/null
+++ b/tools/testing/selftests/net/xfrm_state.sh
@@ -0,0 +1,613 @@
+#!/bin/bash -e
+# SPDX-License-Identifier: GPL-2.0
+#
+# xfrm/IPsec tests.
+# Currently implemented:
+# - ICMP error source address verification (IETF RFC 4301 section 6)
+# - ICMP MTU exceeded handling over IPsec tunnels.
+#
+# Addresses and topology:
+# IPv4 prefix 10.1.c.d IPv6 prefix fc00:c::d/64 where c is the segment number
+# and d is the interface identifier.
+# IPv6 uses the same c:d as IPv4, and start with IPv6 prefix instead ipv4 prefix
+#
+# Network topology default: ns_set_v4 or ns_set_v6
+# 1.1 1.2 2.1 2.2 3.1 3.2 4.1 4.2 5.1 5.2 6.1 6.2
+# eth0 eth1 eth0 eth1 eth0 eth1 eth0 eth1 eth0 eth1 eth0 eth1
+# a -------- r1 -------- s1 -------- r2 -------- s2 -------- r3 -------- b
+# a, b = Alice and Bob hosts without IPsec.
+# r1, r2, r3 routers, without IPsec
+# s1, s2, IPsec gateways/routers that setup tunnel(s).
+
+# Network topology x: IPsec gateway that generates ICMP response - ns_set_v4x or ns_set_v6x
+# 1.1 1.2 2.1 2.2 3.1 3.2 4.1 4.2 5.1 5.2
+# eth0 eth1 eth0 eth1 eth0 eth1 eth0 eth1 eth0 eth1
+# a -------- r1 -------- s1 -------- r2 -------- s2 -------- b
+
+. lib.sh
+
+EXIT_ON_TEST_FAIL=no
+PAUSE=no
+VERBOSE=${VERBOSE:-0}
+DEBUG=0
+
+# Name Description
+tests="
+ unreachable_ipv4 IPv4 unreachable from router r3
+ unreachable_ipv6 IPv6 unreachable from router r3
+ unreachable_gw_ipv4 IPv4 unreachable from IPsec gateway s2
+ unreachable_gw_ipv6 IPv6 unreachable from IPsec gateway s2
+ mtu_ipv4_s2 IPv4 MTU exceeded from IPsec gateway s2
+ mtu_ipv6_s2 IPv6 MTU exceeded from IPsec gateway s2
+ mtu_ipv4_r2 IPv4 MTU exceeded from ESP router r2
+ mtu_ipv6_r2 IPv6 MTU exceeded from ESP router r2
+ mtu_ipv4_r3 IPv4 MTU exceeded from router r3
+ mtu_ipv6_r3 IPv6 MTU exceeded from router r3"
+
+prefix4="10.1"
+prefix6="fc00"
+
+run_cmd_err() {
+ cmd="$*"
+
+ if [ "$VERBOSE" -gt 0 ]; then
+ printf " COMMAND: %s\n" "$cmd"
+ fi
+
+ out="$($cmd 2>&1)" && rc=0 || rc=$?
+ if [ "$VERBOSE" -gt 1 ] && [ -n "$out" ]; then
+ echo " $out"
+ echo
+ fi
+ return 0
+}
+
+run_cmd() {
+ run_cmd_err "$@" || exit 1
+}
+
+run_test() {
+ # If errexit is set, unset it for sub-shell and restore after test
+ errexit=0
+ if [[ $- =~ "e" ]]; then
+ errexit=1
+ set +e
+ fi
+
+ (
+ unset IFS
+
+ # shellcheck disable=SC2030 # fail is read by trap/cleanup within this subshell
+ fail="yes"
+
+ # Since cleanup() relies on variables modified by this sub shell,
+ # it has to run in this context.
+ trap 'log_test_error $?; cleanup' EXIT INT TERM
+
+ if [ "$VERBOSE" -gt 0 ]; then
+ printf "\n#############################################################\n\n"
+ fi
+
+ ret=0
+ case "${name}" in
+ # can't use eval and test names shell check will complain about unused code
+ unreachable_ipv4) test_unreachable_ipv4 ;;
+ unreachable_ipv6) test_unreachable_ipv6 ;;
+ unreachable_gw_ipv4) test_unreachable_gw_ipv4 ;;
+ unreachable_gw_ipv6) test_unreachable_gw_ipv6 ;;
+ mtu_ipv4_s2) test_mtu_ipv4_s2 ;;
+ mtu_ipv6_s2) test_mtu_ipv6_s2 ;;
+ mtu_ipv4_r2) test_mtu_ipv4_r2 ;;
+ mtu_ipv6_r2) test_mtu_ipv6_r2 ;;
+ mtu_ipv4_r3) test_mtu_ipv4_r3 ;;
+ mtu_ipv6_r3) test_mtu_ipv6_r3 ;;
+ esac
+ ret=$?
+
+ if [ $ret -eq 0 ]; then
+ fail="no"
+
+ if [ "$VERBOSE" -gt 1 ]; then
+ show_icmp_filter
+ fi
+
+ printf "TEST: %-60s [ PASS ]\n" "${desc}"
+ elif [ $ret -eq "$ksft_skip" ]; then
+ fail="no"
+ printf "TEST: %-60s [SKIP]\n" "${desc}"
+ fi
+
+ return $ret
+ )
+ ret=$?
+
+ [ $errexit -eq 1 ] && set -e
+
+ case $ret in
+ 0)
+ all_skipped=false
+ [ "$exitcode" -eq "$ksft_skip" ] && exitcode=0
+ ;;
+ "$ksft_skip")
+ [ $all_skipped = true ] && exitcode=$ksft_skip
+ ;;
+ *)
+ all_skipped=false
+ exitcode=1
+ ;;
+ esac
+
+ return 0 # don't trigger errexit (-e); actual status in exitcode
+}
+
+setup_namespaces() {
+ local namespaces=""
+
+ NS_A=""
+ NS_B=""
+ NS_R1=""
+ NS_R2=""
+ NS_R3=""
+ NS_S1=""
+ NS_S2=""
+
+ for ns in ${ns_set}; do
+ namespaces="$namespaces NS_${ns^^}"
+ done
+
+ # shellcheck disable=SC2086 # setup_ns expects unquoted list
+ setup_ns $namespaces
+
+ ns_active= #ordered list of namespaces for this test.
+
+ [ -n "${NS_A}" ] && ns_a=(ip netns exec "${NS_A}") && ns_active="${ns_active} $NS_A"
+ [ -n "${NS_R1}" ] && ns_active="${ns_active} $NS_R1"
+ [ -n "${NS_S1}" ] && ns_s1=(ip netns exec "${NS_S1}") && ns_active="${ns_active} $NS_S1"
+ [ -n "${NS_R2}" ] && ns_r2=(ip netns exec "${NS_R2}") && ns_active="${ns_active} $NS_R2"
+ [ -n "${NS_S2}" ] && ns_s2=(ip netns exec "${NS_S2}") && ns_active="${ns_active} $NS_S2"
+ [ -n "${NS_R3}" ] && ns_r3=(ip netns exec "${NS_R3}") && ns_active="${ns_active} $NS_R3"
+ [ -n "${NS_B}" ] && ns_active="${ns_active} $NS_B"
+}
+
+addr_add() {
+ local -a ns_cmd=(ip netns exec "$1")
+ local addr="$2"
+ local dev="$3"
+
+ run_cmd "${ns_cmd[@]}" ip addr add "${addr}" dev "${dev}"
+ run_cmd "${ns_cmd[@]}" ip link set up "${dev}"
+}
+
+veth_add() {
+ local ns=$2
+ local pns=$1
+ local -a ns_cmd=(ip netns exec "${pns}")
+ local ln="eth0"
+ local rn="eth1"
+
+ run_cmd "${ns_cmd[@]}" ip link add "${ln}" type veth peer name "${rn}" netns "${ns}"
+}
+
+show_icmp_filter() {
+ run_cmd "${ns_r2[@]}" nft list ruleset
+ echo "$out"
+}
+
+setup_icmp_filter() {
+ run_cmd "${ns_r2[@]}" nft add table inet filter
+ run_cmd "${ns_r2[@]}" nft add chain inet filter FORWARD \
+ '{ type filter hook forward priority filter; policy drop ; }'
+ run_cmd "${ns_r2[@]}" nft add rule inet filter FORWARD counter ip protocol esp \
+ counter log accept
+ run_cmd "${ns_r2[@]}" nft add rule inet filter FORWARD counter ip protocol \
+ icmp counter log drop
+
+ if [ "$VERBOSE" -gt 0 ]; then
+ run_cmd "${ns_r2[@]}" nft list ruleset
+ echo "$out"
+ fi
+}
+
+setup_icmpv6_filter() {
+ run_cmd "${ns_r2[@]}" nft add table inet filter
+ run_cmd "${ns_r2[@]}" nft add chain inet filter FORWARD \
+ '{ type filter hook forward priority filter; policy drop ; }'
+ run_cmd "${ns_r2[@]}" nft add rule inet filter FORWARD ip6 nexthdr \
+ ipv6-icmp icmpv6 type echo-request counter log drop
+ run_cmd "${ns_r2[@]}" nft add rule inet filter FORWARD ip6 nexthdr esp \
+ counter log accept
+ run_cmd "${ns_r2[@]}" nft add rule inet filter FORWARD ip6 nexthdr \
+ ipv6-icmp icmpv6 type \
+ '{nd-neighbor-solicit,nd-neighbor-advert,nd-router-solicit,nd-router-advert}' \
+ counter log drop
+ if [ "$VERBOSE" -gt 0 ]; then
+ run_cmd "${ns_r2[@]}" nft list ruleset
+ echo "$out"
+ fi
+}
+
+set_xfrm_params() {
+ s1_src=${src}
+ s1_dst=${dst}
+ s1_src_net=${src_net}
+ s1_dst_net=${dst_net}
+}
+
+setup_ns_set_v4() {
+ ns_set="a r1 s1 r2 s2 r3 b" # Network topology default
+ imax=$(echo "$ns_set" | wc -w) # number of namespaces in this topology
+
+ src="10.1.3.1"
+ dst="10.1.4.2"
+ src_net="10.1.1.0/24"
+ dst_net="10.1.6.0/24"
+
+ prefix=${prefix4}
+ prefix_len=24
+ s="."
+ S="."
+
+ set_xfrm_params
+}
+
+setup_ns_set_v4x() {
+ ns_set="a r1 s1 r2 s2 b" # Network topology: x
+ imax=$(echo "$ns_set" | wc -w) # number of namespaces in this topology
+ prefix=${prefix4}
+ s="."
+ S="."
+ src="10.1.3.1"
+ dst="10.1.4.2"
+ src_net="10.1.1.0/24"
+ dst_net="10.1.5.0/24"
+ prefix_len=24
+
+ set_xfrm_params
+}
+
+setup_ns_set_v6() {
+ ns_set="a r1 s1 r2 s2 r3 b" # Network topology default
+ imax=$(echo "$ns_set" | wc -w) # number of namespaces in this topology
+ prefix=${prefix6}
+ s=":"
+ S="::"
+ src="fc00:3::1"
+ dst="fc00:4::2"
+ src_net="fc00:1::0/64"
+ dst_net="fc00:6::0/64"
+ prefix_len=64
+
+ set_xfrm_params
+}
+
+setup_ns_set_v6x() {
+ ns_set="a r1 s1 r2 s2 b" # Network topology: x
+ imax=$(echo "$ns_set" | wc -w)
+ prefix=${prefix6}
+ s=":"
+ S="::"
+ src="fc00:3::1"
+ dst="fc00:4::2"
+ src_net="fc00:1::0/64"
+ dst_net="fc00:5::0/64"
+ prefix_len=64
+
+ set_xfrm_params
+}
+
+setup_network() {
+ # Create veths and add addresses
+ local -a ns_cmd
+ i=1
+ p=""
+ for ns in ${ns_active}; do
+ ns_cmd=(ip netns exec "${ns}")
+
+ if [ "${i}" -ne 1 ]; then
+ # Create veth between previous and current namespace
+ veth_add "${p}" "${ns}"
+ # Add addresses: previous gets .1 on eth0, current gets .2 on eth1
+ addr_add "${p}" "${prefix}${s}$((i-1))${S}1/${prefix_len}" eth0
+ addr_add "${ns}" "${prefix}${s}$((i-1))${S}2/${prefix_len}" eth1
+ fi
+
+ # Enable forwarding
+ run_cmd "${ns_cmd[@]}" sysctl -q net/ipv4/ip_forward=1
+ run_cmd "${ns_cmd[@]}" sysctl -q net/ipv6/conf/all/forwarding=1
+ run_cmd "${ns_cmd[@]}" sysctl -q net/ipv6/conf/default/accept_dad=0
+
+ p=${ns}
+ i=$((i + 1))
+ done
+
+ # Add routes (needs all addresses to exist first)
+ i=1
+ for ns in ${ns_active}; do
+ ns_cmd=(ip netns exec "${ns}")
+
+ # Forward routes to networks beyond this node
+ if [ "${i}" -ne "${imax}" ]; then
+ nhf="${prefix}${s}${i}${S}2" # nexthop forward
+ for j in $(seq $((i + 1)) "${imax}"); do
+ run_cmd "${ns_cmd[@]}" ip route replace \
+ "${prefix}${s}${j}${S}0/${prefix_len}" via "${nhf}"
+ done
+ fi
+
+ # Reverse routes to networks before this node
+ if [ "${i}" -gt 1 ]; then
+ nhr="${prefix}${s}$((i-1))${S}1" # nexthop reverse
+ for j in $(seq 1 $((i - 2))); do
+ run_cmd "${ns_cmd[@]}" ip route replace \
+ "${prefix}${s}${j}${S}0/${prefix_len}" via "${nhr}"
+ done
+ fi
+
+ i=$((i + 1))
+ done
+}
+
+setup_xfrm_mode() {
+ local MODE=${1:-tunnel}
+ if [ "${MODE}" != "tunnel" ] && [ "${MODE}" != "beet" ]; then
+ echo "xfrm mode ${MODE} not supported"
+ log_test_error
+ return 1
+ fi
+
+ run_cmd "${ns_s1[@]}" ip xfrm policy add src "${s1_src_net}" dst "${s1_dst_net}" dir out \
+ tmpl src "${s1_src}" dst "${s1_dst}" proto esp reqid 1 mode "${MODE}"
+
+ # no "input" policies. we are only doing forwarding so far
+
+ run_cmd "${ns_s1[@]}" ip xfrm policy add src "${s1_dst_net}" dst "${s1_src_net}" dir fwd \
+ flag icmp tmpl src "${s1_dst}" dst "${s1_src}" proto esp reqid 2 mode "${MODE}"
+
+ run_cmd "${ns_s1[@]}" ip xfrm state add src "${s1_src}" dst "${s1_dst}" proto esp spi 1 \
+ reqid 1 mode "${MODE}" aead 'rfc4106(gcm(aes))' \
+ 0x1111111111111111111111111111111111111111 96 \
+ sel src "${s1_src_net}" dst "${s1_dst_net}" dir out
+
+ run_cmd "${ns_s1[@]}" ip xfrm state add src "${s1_dst}" dst "${s1_src}" proto esp spi 2 \
+ reqid 2 flag icmp replay-window 8 mode "${MODE}" aead 'rfc4106(gcm(aes))' \
+ 0x2222222222222222222222222222222222222222 96 \
+ sel src "${s1_dst_net}" dst "${s1_src_net}" dir in
+
+ run_cmd "${ns_s2[@]}" ip xfrm policy add src "${s1_dst_net}" dst "${s1_src_net}" dir out \
+ flag icmp tmpl src "${s1_dst}" dst "${s1_src}" proto esp reqid 2 mode "${MODE}"
+
+ run_cmd "${ns_s2[@]}" ip xfrm policy add src "${s1_src_net}" dst "${s1_dst_net}" dir fwd \
+ tmpl src "${s1_src}" dst "${s1_dst}" proto esp reqid 1 mode "${MODE}"
+
+ run_cmd "${ns_s2[@]}" ip xfrm state add src "${s1_dst}" dst "${s1_src}" proto esp spi 2 \
+ reqid 2 mode "${MODE}" aead 'rfc4106(gcm(aes))' \
+ 0x2222222222222222222222222222222222222222 96 \
+ sel src "${s1_dst_net}" dst "${s1_src_net}" dir out
+
+ run_cmd "${ns_s2[@]}" ip xfrm state add src "${s1_src}" dst "${s1_dst}" proto esp spi 1 \
+ reqid 1 flag icmp replay-window 8 mode "${MODE}" aead 'rfc4106(gcm(aes))' \
+ 0x1111111111111111111111111111111111111111 96 \
+ sel src "${s1_src_net}" dst "${s1_dst_net}" dir in
+}
+
+setup_xfrm() {
+ setup_xfrm_mode tunnel
+}
+
+setup() {
+ [ "$(id -u)" -ne 0 ] && echo " need to run as root" && return "$ksft_skip"
+
+ for arg; do
+ case "${arg}" in
+ ns_set_v4) setup_ns_set_v4 ;;
+ ns_set_v4x) setup_ns_set_v4x ;;
+ ns_set_v6) setup_ns_set_v6 ;;
+ ns_set_v6x) setup_ns_set_v6x ;;
+ namespaces) setup_namespaces ;;
+ network) setup_network ;;
+ xfrm) setup_xfrm ;;
+ icmp_filter) setup_icmp_filter ;;
+ icmpv6_filter) setup_icmpv6_filter ;;
+ *) echo " ${arg} not supported"; return 1 ;;
+ esac || return 1
+ done
+}
+
+# shellcheck disable=SC2317 # called via trap
+pause() {
+ echo
+ echo "Pausing. Hit enter to continue"
+ read -r _
+}
+
+# shellcheck disable=SC2317 # called via trap
+log_test_error() {
+ # shellcheck disable=SC2031 # fail is set in subshell, read via trap
+ if [ "${fail}" = "yes" ] && [ -n "${desc}" ]; then
+ if [ "$VERBOSE" -gt 0 ]; then
+ show_icmp_filter
+ fi
+ printf "TEST: %-60s [ FAIL ] %s\n" "${desc}" "${name}"
+ [ -n "${cmd}" ] && printf '%s\n\n' "${cmd}"
+ [ -n "${out}" ] && printf '%s\n\n' "${out}"
+ fi
+}
+
+# shellcheck disable=SC2317 # called via trap
+cleanup() {
+ # shellcheck disable=SC2031 # fail is set in subshell, read via trap
+ [[ "$PAUSE" = "always" || ( "$PAUSE" = "fail" && "$fail" = "yes" ) ]] && pause
+ cleanup_all_ns
+ # shellcheck disable=SC2031 # fail is set in subshell, read via trap
+ [ "${EXIT_ON_TEST_FAIL}" = "yes" ] && [ "${fail}" = "yes" ] && exit 1
+}
+
+test_unreachable_ipv6() {
+ setup ns_set_v6 namespaces network xfrm icmpv6_filter || return "$ksft_skip"
+ run_cmd "${ns_a[@]}" ping -W 5 -w 4 -c 1 fc00:6::2
+ run_cmd_err "${ns_a[@]}" ping -W 5 -w 4 -c 1 fc00:6::3
+ rc=0
+ echo -e "$out" | grep -q -E 'From fc00:5::2 icmp_seq.* Destination' || rc=1
+ return "${rc}"
+}
+
+test_unreachable_gw_ipv6() {
+ setup ns_set_v6x namespaces network xfrm icmpv6_filter || return "$ksft_skip"
+ run_cmd "${ns_a[@]}" ping -W 5 -w 4 -c 1 fc00:5::2
+ run_cmd_err "${ns_a[@]}" ping -W 5 -w 4 -c 1 fc00:5::3
+ rc=0
+ echo -e "$out" | grep -q -E 'From fc00:4::2 icmp_seq.* Destination' || rc=1
+ return "${rc}"
+}
+
+test_unreachable_ipv4() {
+ setup ns_set_v4 namespaces network icmp_filter xfrm || return "$ksft_skip"
+ run_cmd "${ns_a[@]}" ping -W 5 -w 4 -c 1 10.1.6.2
+ run_cmd_err "${ns_a[@]}" ping -W 5 -w 4 -c 1 10.1.6.3
+ rc=0
+ echo -e "$out" | grep -q -E 'From 10.1.5.2 icmp_seq.* Destination' || rc=1
+ return "${rc}"
+}
+
+test_unreachable_gw_ipv4() {
+ setup ns_set_v4x namespaces network icmp_filter xfrm || return "$ksft_skip"
+ run_cmd "${ns_a[@]}" ping -W 5 -w 4 -c 1 10.1.5.2
+ run_cmd_err "${ns_a[@]}" ping -W 5 -w 4 -c 1 10.1.5.3
+ rc=0
+ echo -e "$out" | grep -q -E 'From 10.1.4.2 icmp_seq.* Destination' || rc=1
+ return "${rc}"
+}
+
+test_mtu_ipv4_r2() {
+ setup ns_set_v4 namespaces network icmp_filter xfrm || return "$ksft_skip"
+ run_cmd "${ns_a[@]}" ping -W 5 -w 4 -c 1 10.1.6.2
+ run_cmd "${ns_r2[@]}" ip route replace 10.1.3.0/24 dev eth1 src 10.1.3.2 mtu 1300
+ run_cmd "${ns_r2[@]}" ip route replace 10.1.4.0/24 dev eth0 src 10.1.4.1 mtu 1300
+ # shellcheck disable=SC1010 # -M do: do = dont-fragment, not shell keyword
+ run_cmd "${ns_a[@]}" ping -M do -s 1300 -W 5 -w 4 -c 1 10.1.6.2 || true
+ rc=0
+ echo -e "$out" | grep -q -E "From 10.1.2.2 icmp_seq=.* Frag needed and DF set" || rc=1
+ return "${rc}"
+}
+
+test_mtu_ipv6_r2() {
+ setup ns_set_v6 namespaces network xfrm icmpv6_filter || return "$ksft_skip"
+ run_cmd "${ns_a[@]}" ping -W 5 -w 4 -c 1 fc00:6::2
+ run_cmd "${ns_r2[@]}" ip -6 route replace fc00:3::/64 \
+ dev eth1 metric 256 src fc00:3::2 mtu 1300
+ run_cmd "${ns_r2[@]}" ip -6 route replace fc00:4::/64 \
+ dev eth0 metric 256 src fc00:4::1 mtu 1300
+ # shellcheck disable=SC1010 # -M do: do = dont-fragment, not shell keyword
+ run_cmd "${ns_a[@]}" ping -M do -s 1300 -W 5 -w 4 -c 1 fc00:6::2 || true
+ rc=0
+ echo -e "$out" | grep -q -E "From fc00:2::2 icmp_seq=.* Packet too big: mtu=1230" || rc=1
+ return "${rc}"
+}
+
+test_mtu_ipv4_r3() {
+ setup ns_set_v4 namespaces network icmp_filter xfrm || return "$ksft_skip"
+ run_cmd "${ns_a[@]}" ping -W 5 -w 4 -c 1 10.1.6.2
+ run_cmd "${ns_r3[@]}" ip route replace 10.1.6.0/24 dev eth0 mtu 1300
+ # shellcheck disable=SC1010 # -M do: do = dont-fragment, not shell keyword
+ run_cmd "${ns_a[@]}" ping -M do -s 1350 -W 5 -w 4 -c 1 10.1.6.2 || true
+ rc=0
+ echo -e "$out" | grep -q -E "From 10.1.5.2 .* Frag needed and DF set \(mtu = 1300\)" || rc=1
+ return "${rc}"
+}
+
+test_mtu_ipv4_s2() {
+ setup ns_set_v4x namespaces network icmp_filter xfrm || return "$ksft_skip"
+ run_cmd "${ns_a[@]}" ping -W 5 -w 4 -c 1 10.1.5.2
+ run_cmd "${ns_s2[@]}" ip route replace 10.1.5.0/24 dev eth0 src 10.1.5.1 mtu 1300
+ # shellcheck disable=SC1010 # -M do: do = dont-fragment, not shell keyword
+ run_cmd "${ns_a[@]}" ping -M do -s 1350 -W 5 -w 4 -c 1 10.1.5.2 || true
+ rc=0
+ echo -e "$out" | grep -q -E "From 10.1.4.2.*Frag needed and DF set \(mtu = 1300\)" || rc=1
+ return "${rc}"
+}
+
+test_mtu_ipv6_s2() {
+ setup ns_set_v6x namespaces network xfrm icmpv6_filter || return "$ksft_skip"
+ run_cmd "${ns_a[@]}" ping -W 5 -w 4 -c 1 fc00:5::2
+ run_cmd "${ns_s2[@]}" ip -6 route replace fc00:5::/64 dev eth0 metric 256 mtu 1300
+ # shellcheck disable=SC1010 # -M do: do = dont-fragment, not shell keyword
+ run_cmd "${ns_a[@]}" ping -M do -s 1350 -W 5 -w 4 -c 1 fc00:5::2 || true
+ rc=0
+ echo -e "$out" | grep -q -E "From fc00:4::2.*Packet too big: mtu=1300" || rc=1
+ return "${rc}"
+}
+
+test_mtu_ipv6_r3() {
+ setup ns_set_v6 namespaces network xfrm icmpv6_filter || return "$ksft_skip"
+ run_cmd "${ns_a[@]}" ping -W 5 -w 4 -c 1 fc00:6::2
+ run_cmd "${ns_r3[@]}" ip -6 route replace fc00:6::/64 dev eth1 metric 256 mtu 1300
+ # shellcheck disable=SC1010 # -M do: do = dont-fragment, not shell keyword
+ run_cmd "${ns_a[@]}" ping -M do -s 1300 -W 5 -w 4 -c 1 fc00:6::2 || true
+ rc=0
+ echo -e "$out" | grep -q -E "From fc00:5::2 icmp_seq=.* Packet too big: mtu=1300" || rc=1
+ return "${rc}"
+}
+
+################################################################################
+#
+usage() {
+ echo
+ echo "$0 [OPTIONS] [TEST]..."
+ echo "If no TEST argument is given, all tests will be run."
+ echo
+ echo -e "\t-p Pause on fail. Namespaces are kept for diagnostics"
+ echo -e "\t-P Pause after the test. Namespaces are kept for diagnostics"
+ echo -e "\t-v Verbose output. Show commands; -vv Show output and nft rules also"
+ echo "Available tests${tests}"
+ exit 1
+}
+
+################################################################################
+#
+exitcode=0
+all_skipped=true
+out=
+cmd=
+
+while getopts :epPv o; do
+ case $o in
+ e) EXIT_ON_TEST_FAIL=yes ;;
+ P) PAUSE=always ;;
+ p) PAUSE=fail ;;
+ v) VERBOSE=$((VERBOSE + 1)) ;;
+ *) usage ;;
+ esac
+done
+shift $((OPTIND - 1))
+
+IFS=$'\t\n'
+
+for arg; do
+ # Check first that all requested tests are available before running any
+ command -v "test_${arg}" >/dev/null || {
+ echo "=== Test ${arg} not found"
+ usage
+ }
+done
+
+name=""
+desc=""
+fail="no"
+
+for t in ${tests}; do
+ [ "${name}" = "" ] && name="${t}" && continue
+ [ "${desc}" = "" ] && desc="${t}"
+
+ run_this=1
+ for arg; do
+ [ "${arg}" = "${name}" ] && run_this=1 && break
+ run_this=0
+ done
+ if [ $run_this -eq 1 ]; then
+ run_test
+ fi
+ name=""
+ desc=""
+done
+
+exit ${exitcode}
--
2.39.5
^ permalink raw reply related [flat|nested] 3+ messages in thread