Re: [PATCH] mmc: sdhci-msm: Disable broken 64-bit DMA on MSM8916

[Adrian Hunter <adrian.hunter@intel.com>]

On 18/05/23 12:39, Stephan Gerhold wrote:
> While SDHCI claims to support 64-bit DMA on MSM8916 it does not seem to
> be properly functional. It is not immediately obvious because SDHCI is
> usually used with IOMMU bypassed on this SoC, and all physical memory
> has 32-bit addresses. But when trying to enable the IOMMU it quickly
> fails with an error such as the following:
> 
>   arm-smmu 1e00000.iommu: Unhandled context fault:
>     fsr=0x402, iova=0xfffff200, fsynr=0xe0000, cbfrsynra=0x140, cb=3
>   mmc1: ADMA error: 0x02000000
>   mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
>   mmc1: sdhci: Sys addr:  0x00000000 | Version:  0x00002e02
>   mmc1: sdhci: Blk size:  0x00000008 | Blk cnt:  0x00000000
>   mmc1: sdhci: Argument:  0x00000000 | Trn mode: 0x00000013
>   mmc1: sdhci: Present:   0x03f80206 | Host ctl: 0x00000019
>   mmc1: sdhci: Power:     0x0000000f | Blk gap:  0x00000000
>   mmc1: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
>   mmc1: sdhci: Timeout:   0x0000000a | Int stat: 0x00000001
>   mmc1: sdhci: Int enab:  0x03ff900b | Sig enab: 0x03ff100b
>   mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
>   mmc1: sdhci: Caps:      0x322dc8b2 | Caps_1:   0x00008007
>   mmc1: sdhci: Cmd:       0x0000333a | Max curr: 0x00000000
>   mmc1: sdhci: Resp[0]:   0x00000920 | Resp[1]:  0x5b590000
>   mmc1: sdhci: Resp[2]:   0xe6487f80 | Resp[3]:  0x0a404094
>   mmc1: sdhci: Host ctl2: 0x00000008
>   mmc1: sdhci: ADMA Err:  0x00000001 | ADMA Ptr: 0x0000000ffffff224
>   mmc1: sdhci_msm: ----------- VENDOR REGISTER DUMP -----------
>   mmc1: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:  0x60006400 | DLL cfg2: 0x00000000
>   mmc1: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:  0x00000000 | DDR cfg: 0x00000000
>   mmc1: sdhci_msm: Vndr func: 0x00018a9c | Vndr func2 : 0xf88018a8 Vndr func3: 0x00000000
>   mmc1: sdhci: ============================================
>   mmc1: sdhci: fffffffff200: DMA 0x0000ffffffffe100, LEN 0x0008, Attr=0x21
>   mmc1: sdhci: fffffffff20c: DMA 0x0000000000000000, LEN 0x0000, Attr=0x03
> 
> Looking closely it's obvious that only the 32-bit part of the address
> (0xfffff200) arrives at the SMMU, the higher 16-bit (0xffff...) get
> lost somewhere. This might not be a limitation of the SDHCI itself but
> perhaps the bus/interconnect it is connected to, or even the connection
> to the SMMU.
> 
> Work around this by setting SDHCI_QUIRK2_BROKEN_64_BIT_DMA to avoid
> using 64-bit addresses.
> 
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
>  drivers/mmc/host/sdhci-msm.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 8ac81d57a3df..1877d583fe8c 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -2479,6 +2479,9 @@ static inline void sdhci_msm_get_of_property(struct platform_device *pdev,
>  		msm_host->ddr_config = DDR_CONFIG_POR_VAL;
>  
>  	of_property_read_u32(node, "qcom,dll-config", &msm_host->dll_config);
> +
> +	if (of_device_is_compatible(node, "qcom,msm8916-sdhci"))
> +		host->quirks2 |= SDHCI_QUIRK2_BROKEN_64_BIT_DMA;
>  }
>  
>  static int sdhci_msm_gcc_reset(struct device *dev, struct sdhci_host *host)
> 
> ---
> base-commit: d4ebc9419afbac330e9ec0d2936108742aa4d97a
> change-id: 20230518-msm8916-64bit-f5bcf6af7679
> 
> Best regards,