public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Armin Wolf <W_Armin@gmx.de>
To: Antheas Kapenekakis <lkml@antheas.dev>,
	platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
	"Hans de Goede" <hansg@kernel.org>,
	"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
	"Derek John Clark" <derekjohn.clark@gmail.com>,
	"Joaquín Ignacio Aramendía" <samsagax@gmail.com>,
	"Jean Delvare" <jdelvare@suse.com>,
	"Guenter Roeck" <linux@roeck-us.net>
Subject: Re: [PATCH v2 4/6] platform/x86: ayaneo-ec: Add controller power and modules attributes
Date: Sun, 26 Oct 2025 23:42:39 +0100	[thread overview]
Message-ID: <7b1fa12c-dc4e-41f2-9807-a4e772c3888e@gmx.de> (raw)
In-Reply-To: <20251015084414.1391595-5-lkml@antheas.dev>

Am 15.10.25 um 10:44 schrieb Antheas Kapenekakis:

> The Ayaneo 3 features hot-swappable controller modules. The ejection
> and management is done through HID. However, after ejecting the modules,
> the controller needs to be power cycled via the EC to re-initialize.
>
> For this, the EC provides a variable that holds whether the left or
> right modules are connected, and a power control register to turn
> the controller on or off. After ejecting the modules, the controller
> should be turned off. Then, after both modules are reinserted,
> the controller may be powered on again to re-initialize.
>
> This patch introduces two new sysfs attributes:
>   - `controller_modules`: a read-only attribute that indicates whether
>     the left and right modules are connected (none, left, right, both).
>   - `controller_power`: a read-write attribute that allows the user
>     to turn the controller on or off (with '1'/'0').
>
> Therefore, after ejection is complete, userspace can power off the
> controller, then wait until both modules have been reinserted
> (`controller_modules` will return 'both') to turn on the controller.
>
> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
> ---
>   .../ABI/testing/sysfs-platform-ayaneo         |  19 ++++
>   MAINTAINERS                                   |   1 +
>   drivers/platform/x86/ayaneo-ec.c              | 100 ++++++++++++++++++
>   3 files changed, 120 insertions(+)
>   create mode 100644 Documentation/ABI/testing/sysfs-platform-ayaneo
>
> diff --git a/Documentation/ABI/testing/sysfs-platform-ayaneo b/Documentation/ABI/testing/sysfs-platform-ayaneo
> new file mode 100644
> index 000000000000..1fa32ba60fd0
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-platform-ayaneo

Better use Documentation/ABI/testing/sysfs-platform-ayaneo-ec.

> @@ -0,0 +1,19 @@
> +What:		/sys/devices/platform/<platform>/controller_power

Better use /sys/devices/platform/ayaneo-ec/controller_power.

> +Date:		Oct 2025
> +KernelVersion:	6.9

Kernel version is outdated.

> +Contact:	"Antheas Kapenekakis" <lkml@antheas.dev>
> +Description:
> +		Current controller power state. Allows turning on and off
> +		the controller power (e.g. for power savings). Write 1 to
> +		turn on, 0 to turn off. File is readable and writable.
> +
> +What:		/sys/devices/platform/<platform>/controller_modules

See above.

> +Date:		Oct 2025
> +KernelVersion:	6.9

See above.

With this being fixed:

Reviewed-by: Armin Wolf <W_Armin@gmx.de>

> +Contact:	"Antheas Kapenekakis"  <lkml@antheas.dev>
> +Description:
> +		Shows which controller modules are currently connected to
> +		the device. Possible values are "left", "right" and "both".
> +		File is read-only. The Windows software for this device
> +		will only set controller power to 1 if both module sides
> +		are connected (i.e. this file returns "both").
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8c4d0c26ca77..3dfa004555dd 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4191,6 +4191,7 @@ AYANEO PLATFORM EC DRIVER
>   M:	Antheas Kapenekakis <lkml@antheas.dev>
>   L:	platform-driver-x86@vger.kernel.org
>   S:	Maintained
> +F:	Documentation/ABI/testing/sysfs-platform-ayaneo
>   F:	drivers/platform/x86/ayaneo-ec.c
>   
>   AZ6007 DVB DRIVER
> diff --git a/drivers/platform/x86/ayaneo-ec.c b/drivers/platform/x86/ayaneo-ec.c
> index 23c283f5eb61..363b61fc6e12 100644
> --- a/drivers/platform/x86/ayaneo-ec.c
> +++ b/drivers/platform/x86/ayaneo-ec.c
> @@ -30,9 +30,17 @@
>   #define AYANEO_CHARGE_VAL_AUTO		0xaa
>   #define AYANEO_CHARGE_VAL_INHIBIT	0x55
>   
> +#define AYANEO_POWER_REG	0x2d
> +#define AYANEO_POWER_OFF	0xfe
> +#define AYANEO_POWER_ON		0xff
> +#define AYANEO_MODULE_REG	0x2f
> +#define AYANEO_MODULE_LEFT	BIT(0)
> +#define AYANEO_MODULE_RIGHT	BIT(1)
> +
>   struct ayaneo_ec_quirk {
>   	bool has_fan_control;
>   	bool has_charge_control;
> +	bool has_magic_modules;
>   };
>   
>   struct ayaneo_ec_platform_data {
> @@ -44,6 +52,7 @@ struct ayaneo_ec_platform_data {
>   static const struct ayaneo_ec_quirk ayaneo3 = {
>   	.has_fan_control = true,
>   	.has_charge_control = true,
> +	.has_magic_modules = true,
>   };
>   
>   static const struct dmi_system_id dmi_table[] = {
> @@ -262,6 +271,96 @@ static int ayaneo_remove_battery(struct power_supply *battery,
>   	return 0;
>   }
>   
> +static ssize_t controller_power_store(struct device *dev,
> +			    struct device_attribute *attr, const char *buf,
> +			    size_t count)
> +{
> +	bool value;
> +	int ret;
> +
> +	ret = kstrtobool(buf, &value);
> +	if (ret)
> +		return ret;
> +
> +	ret = ec_write(AYANEO_POWER_REG, value ? AYANEO_POWER_ON : AYANEO_POWER_OFF);
> +	if (ret)
> +		return ret;
> +
> +	return count;
> +}
> +
> +static ssize_t controller_power_show(struct device *dev,
> +			   struct device_attribute *attr, char *buf)
> +{
> +	int ret;
> +	u8 val;
> +
> +	ret = ec_read(AYANEO_POWER_REG, &val);
> +	if (ret)
> +		return ret;
> +
> +	return sysfs_emit(buf, "%d\n", val == AYANEO_POWER_ON);
> +}
> +
> +static DEVICE_ATTR_RW(controller_power);
> +
> +static ssize_t controller_modules_show(struct device *dev,
> +				       struct device_attribute *attr, char *buf)
> +{
> +	bool left, right;
> +	char *out;
> +	int ret;
> +	u8 val;
> +
> +	ret = ec_read(AYANEO_MODULE_REG, &val);
> +	if (ret)
> +		return ret;
> +
> +	left = !(val & AYANEO_MODULE_LEFT);
> +	right = !(val & AYANEO_MODULE_RIGHT);
> +
> +	if (left && right)
> +		out = "both";
> +	else if (left)
> +		out = "left";
> +	else if (right)
> +		out = "right";
> +	else
> +		out = "none";
> +
> +	return sysfs_emit(buf, "%s\n", out);
> +}
> +
> +static DEVICE_ATTR_RO(controller_modules);
> +
> +static struct attribute *aya_mm_attrs[] = {
> +	&dev_attr_controller_power.attr,
> +	&dev_attr_controller_modules.attr,
> +	NULL
> +};
> +
> +static umode_t aya_mm_is_visible(struct kobject *kobj,
> +				 struct attribute *attr, int n)
> +{
> +	struct device *dev = kobj_to_dev(kobj);
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct ayaneo_ec_platform_data *data = platform_get_drvdata(pdev);
> +
> +	if (data->quirks->has_magic_modules)
> +		return attr->mode;
> +	return 0;
> +}
> +
> +static const struct attribute_group aya_mm_attribute_group = {
> +	.is_visible = aya_mm_is_visible,
> +	.attrs = aya_mm_attrs,
> +};
> +
> +static const struct attribute_group *ayaneo_ec_groups[] = {
> +	&aya_mm_attribute_group,
> +	NULL
> +};
> +
>   static int ayaneo_ec_probe(struct platform_device *pdev)
>   {
>   	const struct dmi_system_id *dmi_entry;
> @@ -303,6 +402,7 @@ static int ayaneo_ec_probe(struct platform_device *pdev)
>   static struct platform_driver ayaneo_platform_driver = {
>   	.driver = {
>   		.name = "ayaneo-ec",
> +		.dev_groups = ayaneo_ec_groups,
>   	},
>   	.probe = ayaneo_ec_probe,
>   };

  parent reply	other threads:[~2025-10-26 22:42 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-15  8:44 [PATCH v2 0/6] platform/x86: ayaneo-ec: Add Ayaneo Embedded Controller platform driver Antheas Kapenekakis
2025-10-15  8:44 ` [PATCH v2 1/6] " Antheas Kapenekakis
2025-10-15  9:04   ` Ilpo Järvinen
2025-10-26 22:25   ` Armin Wolf
2025-10-15  8:44 ` [PATCH v2 2/6] platform/x86: ayaneo-ec: Add hwmon support Antheas Kapenekakis
2025-10-26 22:33   ` Armin Wolf
2025-10-15  8:44 ` [PATCH v2 3/6] platform/x86: ayaneo-ec: Add charge control support Antheas Kapenekakis
2025-10-26 22:35   ` Armin Wolf
2025-10-15  8:44 ` [PATCH v2 4/6] platform/x86: ayaneo-ec: Add controller power and modules attributes Antheas Kapenekakis
2025-10-15  9:05   ` Ilpo Järvinen
2025-10-15  9:08     ` Ilpo Järvinen
2025-10-26 22:42   ` Armin Wolf [this message]
2025-10-15  8:44 ` [PATCH v2 5/6] platform/x86: ayaneo-ec: Move Ayaneo devices from oxpec to ayaneo-ec Antheas Kapenekakis
2025-10-15  9:09   ` Ilpo Järvinen
2025-10-26 22:45   ` Armin Wolf
2025-10-15  8:44 ` [PATCH v2 6/6] platform/x86: ayaneo-ec: Add suspend hook Antheas Kapenekakis
2025-10-15  9:11   ` Ilpo Järvinen
2025-10-15  9:16     ` Antheas Kapenekakis
2025-10-15  9:27       ` Ilpo Järvinen
2025-10-15  9:36         ` Antheas Kapenekakis
2025-10-26 22:49   ` Armin Wolf
2025-10-26 23:17     ` Antheas Kapenekakis
2025-10-28 13:50       ` Armin Wolf
2025-10-28 15:20         ` Antheas Kapenekakis
2025-10-28 15:25           ` Armin Wolf
2025-10-28 17:49             ` Antheas Kapenekakis
2025-10-28 23:14               ` Armin Wolf
2025-10-28 20:26   ` Mario Limonciello
2025-10-28 20:34     ` Antheas Kapenekakis
2025-10-28 21:21       ` Mario Limonciello
2025-10-28 21:39         ` Antheas Kapenekakis
2025-10-29  3:36           ` Mario Limonciello (AMD) (kernel.org)
2025-10-29  8:48             ` Antheas Kapenekakis
2025-10-29 10:22               ` Guenter Roeck
2025-10-29 10:49                 ` Antheas Kapenekakis
2025-10-29 14:25                   ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7b1fa12c-dc4e-41f2-9807-a4e772c3888e@gmx.de \
    --to=w_armin@gmx.de \
    --cc=derekjohn.clark@gmail.com \
    --cc=hansg@kernel.org \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=lkml@antheas.dev \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=samsagax@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox