From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Antheas Kapenekakis <lkml@antheas.dev>
Cc: platform-driver-x86@vger.kernel.org,
LKML <linux-kernel@vger.kernel.org>,
linux-hwmon@vger.kernel.org, "Hans de Goede" <hansg@kernel.org>,
"Derek John Clark" <derekjohn.clark@gmail.com>,
"Joaquín Ignacio Aramendía" <samsagax@gmail.com>,
"Jean Delvare" <jdelvare@suse.com>,
"Guenter Roeck" <linux@roeck-us.net>
Subject: Re: [PATCH v2 6/6] platform/x86: ayaneo-ec: Add suspend hook
Date: Wed, 15 Oct 2025 12:11:40 +0300 (EEST) [thread overview]
Message-ID: <de1f9cd3-183e-7b01-72aa-23fa4d30334e@linux.intel.com> (raw)
In-Reply-To: <20251015084414.1391595-7-lkml@antheas.dev>
On Wed, 15 Oct 2025, Antheas Kapenekakis wrote:
> The Ayaneo EC resets after hibernation, losing the charge control state.
> Add a small PM hook to restore this state on hibernation resume.
>
> The fan speed is also lost during hibernation, but since hibernation
> failures are common with this class of devices, setting a low fan speed
> when the userspace program controlling the fan will potentially not
> take over could cause the device to overheat, so it is not restored.
>
> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
> ---
> drivers/platform/x86/ayaneo-ec.c | 42 ++++++++++++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/drivers/platform/x86/ayaneo-ec.c b/drivers/platform/x86/ayaneo-ec.c
> index 73e9dd39c703..8529f6f8dc69 100644
> --- a/drivers/platform/x86/ayaneo-ec.c
> +++ b/drivers/platform/x86/ayaneo-ec.c
> @@ -37,6 +37,8 @@
> #define AYANEO_MODULE_LEFT BIT(0)
> #define AYANEO_MODULE_RIGHT BIT(1)
>
> +#define AYANEO_CACHE_LEN 1
> +
> struct ayaneo_ec_quirk {
> bool has_fan_control;
> bool has_charge_control;
> @@ -47,6 +49,8 @@ struct ayaneo_ec_platform_data {
> struct platform_device *pdev;
> struct ayaneo_ec_quirk *quirks;
> struct acpi_battery_hook battery_hook;
> +
> + u8 cache[AYANEO_CACHE_LEN];
> };
>
> static const struct ayaneo_ec_quirk quirk_fan = {
> @@ -464,10 +468,48 @@ static int ayaneo_ec_probe(struct platform_device *pdev)
> return 0;
> }
>
> +static int ayaneo_freeze(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct ayaneo_ec_platform_data *data = platform_get_drvdata(pdev);
> + int ret, i = 0;
> +
> + if (data->quirks->has_charge_control) {
> + ret = ec_read(AYANEO_CHARGE_REG, &data->cache[i]);
> + if (ret)
> + return ret;
> + i++;
What is this for?
> + }
> +
> + return 0;
> +}
> +
> +static int ayaneo_thaw(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct ayaneo_ec_platform_data *data = platform_get_drvdata(pdev);
> + int ret, i = 0;
> +
> + if (data->quirks->has_charge_control) {
> + ret = ec_write(AYANEO_CHARGE_REG, data->cache[i]);
> + if (ret)
> + return ret;
> + i++;
Same question here.
> + }
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops ayaneo_pm_ops = {
> + .freeze = ayaneo_freeze,
> + .thaw = ayaneo_thaw,
> +};
> +
> static struct platform_driver ayaneo_platform_driver = {
> .driver = {
> .name = "ayaneo-ec",
> .dev_groups = ayaneo_ec_groups,
> + .pm = &ayaneo_pm_ops,
> },
> .probe = ayaneo_ec_probe,
> };
>
--
i.
next prev parent reply other threads:[~2025-10-15 9:11 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-15 8:44 [PATCH v2 0/6] platform/x86: ayaneo-ec: Add Ayaneo Embedded Controller platform driver Antheas Kapenekakis
2025-10-15 8:44 ` [PATCH v2 1/6] " Antheas Kapenekakis
2025-10-15 9:04 ` Ilpo Järvinen
2025-10-26 22:25 ` Armin Wolf
2025-10-15 8:44 ` [PATCH v2 2/6] platform/x86: ayaneo-ec: Add hwmon support Antheas Kapenekakis
2025-10-26 22:33 ` Armin Wolf
2025-10-15 8:44 ` [PATCH v2 3/6] platform/x86: ayaneo-ec: Add charge control support Antheas Kapenekakis
2025-10-26 22:35 ` Armin Wolf
2025-10-15 8:44 ` [PATCH v2 4/6] platform/x86: ayaneo-ec: Add controller power and modules attributes Antheas Kapenekakis
2025-10-15 9:05 ` Ilpo Järvinen
2025-10-15 9:08 ` Ilpo Järvinen
2025-10-26 22:42 ` Armin Wolf
2025-10-15 8:44 ` [PATCH v2 5/6] platform/x86: ayaneo-ec: Move Ayaneo devices from oxpec to ayaneo-ec Antheas Kapenekakis
2025-10-15 9:09 ` Ilpo Järvinen
2025-10-26 22:45 ` Armin Wolf
2025-10-15 8:44 ` [PATCH v2 6/6] platform/x86: ayaneo-ec: Add suspend hook Antheas Kapenekakis
2025-10-15 9:11 ` Ilpo Järvinen [this message]
2025-10-15 9:16 ` Antheas Kapenekakis
2025-10-15 9:27 ` Ilpo Järvinen
2025-10-15 9:36 ` Antheas Kapenekakis
2025-10-26 22:49 ` Armin Wolf
2025-10-26 23:17 ` Antheas Kapenekakis
2025-10-28 13:50 ` Armin Wolf
2025-10-28 15:20 ` Antheas Kapenekakis
2025-10-28 15:25 ` Armin Wolf
2025-10-28 17:49 ` Antheas Kapenekakis
2025-10-28 23:14 ` Armin Wolf
2025-10-28 20:26 ` Mario Limonciello
2025-10-28 20:34 ` Antheas Kapenekakis
2025-10-28 21:21 ` Mario Limonciello
2025-10-28 21:39 ` Antheas Kapenekakis
2025-10-29 3:36 ` Mario Limonciello (AMD) (kernel.org)
2025-10-29 8:48 ` Antheas Kapenekakis
2025-10-29 10:22 ` Guenter Roeck
2025-10-29 10:49 ` Antheas Kapenekakis
2025-10-29 14:25 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=de1f9cd3-183e-7b01-72aa-23fa4d30334e@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=derekjohn.clark@gmail.com \
--cc=hansg@kernel.org \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lkml@antheas.dev \
--cc=platform-driver-x86@vger.kernel.org \
--cc=samsagax@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox