From: Dave Jiang <dave.jiang@intel.com>
To: Robert Richter <rrichter@amd.com>,
Alison Schofield <alison.schofield@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
Dan Williams <dan.j.williams@intel.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Davidlohr Bueso <dave@stgolabs.net>
Cc: linux-cxl@vger.kernel.org, linux-kernel@vger.kernel.org,
Gregory Price <gourry@gourry.net>,
"Fabio M. De Francesco" <fabio.m.de.francesco@linux.intel.com>,
Terry Bowman <terry.bowman@amd.com>
Subject: Re: [PATCH v3 09/18] cxl/region: Factor out code to find the root decoder
Date: Thu, 20 Feb 2025 09:48:23 -0700 [thread overview]
Message-ID: <7ea607c2-b769-4077-9df0-79f79bb0415e@intel.com> (raw)
In-Reply-To: <20250211095349.981096-10-rrichter@amd.com>
On 2/11/25 2:53 AM, Robert Richter wrote:
> In function cxl_add_to_region() there is code to determine the root
> decoder associated to an endpoint decoder. Factor out that code for
> later reuse. This has the benefit of reducing cxl_add_to_region()'s
> function complexity.
>
> The reference of cxlrd_dev can be freed earlier. Since the root
> decoder exists as long as the root port exists and the endpoint
> already holds a reference to the root port, this additional reference
> is not needed. Though it looks obvious to use __free() for the
> reference of cxlrd_dev here too, this is done in a later rework. So
> just move the code.
>
> Signed-off-by: Robert Richter <rrichter@amd.com>
> Reviewed-by: Gregory Price <gourry@gourry.net>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Tested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
> ---
> drivers/cxl/core/region.c | 55 ++++++++++++++++++++++++++-------------
> 1 file changed, 37 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
> index 0e38bcb43be6..c641c8922455 100644
> --- a/drivers/cxl/core/region.c
> +++ b/drivers/cxl/core/region.c
> @@ -3203,6 +3203,38 @@ static int match_root_decoder_by_range(struct device *dev,
> return range_contains(r1, r2);
> }
>
> +static struct cxl_root_decoder *
> +cxl_find_root_decoder(struct cxl_endpoint_decoder *cxled)
> +{
> + struct cxl_memdev *cxlmd = cxled_to_memdev(cxled);
> + struct cxl_port *port = cxled_to_port(cxled);
> + struct cxl_root *cxl_root __free(put_cxl_root) = find_cxl_root(port);
> + struct cxl_decoder *cxld = &cxled->cxld;
> + struct range *hpa = &cxld->hpa_range;
> + struct device *cxlrd_dev;
> +
> + cxlrd_dev = device_find_child(&cxl_root->port.dev, hpa,
> + match_root_decoder_by_range);
> + if (!cxlrd_dev) {
> + dev_err(cxlmd->dev.parent,
> + "%s:%s no CXL window for range %#llx:%#llx\n",
> + dev_name(&cxlmd->dev), dev_name(&cxld->dev),
> + cxld->hpa_range.start, cxld->hpa_range.end);
> + return NULL;
> + }
> +
> + /*
> + * device_find_child() created a reference to the root
> + * decoder. Since the root decoder exists as long as the root
> + * port exists and the endpoint already holds a reference to
> + * the root port, this additional reference is not needed.
> + * Free it here.
> + */
> + put_device(cxlrd_dev);
> +
> + return to_cxl_root_decoder(cxlrd_dev);
> +}
> +
> static int match_region_by_range(struct device *dev, const void *data)
> {
> struct cxl_region_params *p;
> @@ -3314,29 +3346,17 @@ static struct cxl_region *construct_region(struct cxl_root_decoder *cxlrd,
>
> int cxl_add_to_region(struct cxl_endpoint_decoder *cxled)
> {
> - struct cxl_memdev *cxlmd = cxled_to_memdev(cxled);
> - struct cxl_port *port = cxled_to_port(cxled);
> - struct cxl_root *cxl_root __free(put_cxl_root) = find_cxl_root(port);
> struct range *hpa = &cxled->cxld.hpa_range;
> - struct cxl_decoder *cxld = &cxled->cxld;
> - struct device *cxlrd_dev, *region_dev;
> + struct device *region_dev;
> struct cxl_root_decoder *cxlrd;
> struct cxl_region_params *p;
> struct cxl_region *cxlr;
> bool attach = false;
> int rc;
>
> - cxlrd_dev = device_find_child(&cxl_root->port.dev, &cxld->hpa_range,
> - match_root_decoder_by_range);
> - if (!cxlrd_dev) {
> - dev_err(cxlmd->dev.parent,
> - "%s:%s no CXL window for range %#llx:%#llx\n",
> - dev_name(&cxlmd->dev), dev_name(&cxld->dev),
> - cxld->hpa_range.start, cxld->hpa_range.end);
> + cxlrd = cxl_find_root_decoder(cxled);
> + if (!cxlrd)
> return -ENXIO;
> - }
> -
> - cxlrd = to_cxl_root_decoder(cxlrd_dev);
>
> /*
> * Ensure that if multiple threads race to construct_region() for @hpa
> @@ -3354,7 +3374,7 @@ int cxl_add_to_region(struct cxl_endpoint_decoder *cxled)
>
> rc = PTR_ERR_OR_ZERO(cxlr);
> if (rc)
> - goto out;
> + return rc;
>
> attach_target(cxlr, cxled, -1, TASK_UNINTERRUPTIBLE);
>
> @@ -3375,8 +3395,7 @@ int cxl_add_to_region(struct cxl_endpoint_decoder *cxled)
> }
>
> put_device(region_dev);
> -out:
> - put_device(cxlrd_dev);
> +
> return rc;
> }
> EXPORT_SYMBOL_NS_GPL(cxl_add_to_region, "CXL");
next prev parent reply other threads:[~2025-02-20 16:48 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-11 9:53 [PATCH v3 00/18] cxl: Address translation support, part 1: Cleanups and refactoring Robert Richter
2025-02-11 9:53 ` [PATCH v3 01/18] cxl: Remove else after return Robert Richter
2025-02-11 9:53 ` [PATCH v3 02/18] cxl/pci: Moving code in cxl_hdm_decode_init() Robert Richter
2025-02-12 17:57 ` Jonathan Cameron
2025-02-20 1:03 ` Dave Jiang
2025-02-11 9:53 ` [PATCH v3 03/18] cxl/pci: cxl_hdm_decode_init: Move comment Robert Richter
2025-02-12 18:09 ` Jonathan Cameron
2025-02-13 0:35 ` Robert Richter
2025-02-14 15:49 ` Jonathan Cameron
2025-03-06 9:38 ` Robert Richter
2025-02-11 9:53 ` [PATCH v3 04/18] cxl/pci: Add comments to cxl_hdm_decode_init() Robert Richter
2025-02-14 15:51 ` Jonathan Cameron
2025-02-11 9:53 ` [PATCH v3 05/18] cxl: Introduce parent_port_of() helper Robert Richter
2025-02-20 16:12 ` Dave Jiang
2025-02-11 9:53 ` [PATCH v3 06/18] cxl/region: Rename function to cxl_find_decoder_early() Robert Richter
2025-02-14 15:58 ` Jonathan Cameron
2025-03-05 12:48 ` Robert Richter
2025-02-11 9:53 ` [PATCH v3 07/18] cxl/region: Avoid duplicate call of cxl_find_decoder_early() Robert Richter
2025-02-14 16:07 ` Jonathan Cameron
2025-03-06 9:16 ` Robert Richter
2025-02-11 9:53 ` [PATCH v3 08/18] cxl/region: Move find_cxl_root() to cxl_add_to_region() Robert Richter
2025-02-20 16:39 ` Dave Jiang
2025-02-11 9:53 ` [PATCH v3 09/18] cxl/region: Factor out code to find the root decoder Robert Richter
2025-02-20 16:48 ` Dave Jiang [this message]
2025-02-11 9:53 ` [PATCH v3 10/18] cxl/region: Factor out code to find a root decoder's region Robert Richter
2025-02-14 16:15 ` Jonathan Cameron
2025-02-20 16:50 ` Dave Jiang
2025-02-11 9:53 ` [PATCH v3 11/18] cxl/region: Split region registration into an initialization and adding part Robert Richter
2025-02-14 16:24 ` Jonathan Cameron
2025-02-11 9:53 ` [PATCH v3 12/18] cxl/region: Use iterator to find the root port in cxl_find_root_decoder() Robert Richter
2025-02-20 17:17 ` Dave Jiang
2025-02-11 9:53 ` [PATCH v3 13/18] cxl/region: Add function to find a port's switch decoder by range Robert Richter
2025-02-14 16:29 ` Jonathan Cameron
2025-02-20 17:23 ` Dave Jiang
2025-02-11 9:53 ` [PATCH v3 14/18] cxl/region: Unfold cxl_find_root_decoder() into cxl_endpoint_decoder_initialize() Robert Richter
2025-02-14 16:33 ` Jonathan Cameron
2025-03-06 16:18 ` Robert Richter
2025-02-11 9:53 ` [PATCH v3 15/18] cxl/region: Add a dev_warn() on registration failure Robert Richter
2025-02-14 16:35 ` Jonathan Cameron
2025-02-20 17:35 ` Dave Jiang
2025-02-11 9:53 ` [PATCH v3 16/18] cxl/region: Add a dev_err() on missing target list entries Robert Richter
2025-02-14 16:36 ` Jonathan Cameron
2025-02-20 17:44 ` Dave Jiang
2025-02-11 9:53 ` [PATCH v3 17/18] cxl: Add a dev_dbg() when a decoder was added to a port Robert Richter
2025-02-14 16:37 ` Jonathan Cameron
2025-02-20 17:45 ` Dave Jiang
2025-02-11 9:53 ` [PATCH v3 18/18] cxl/acpi: Unify CFMWS memory log messages with SRAT messages Robert Richter
2025-02-14 16:37 ` Jonathan Cameron
2025-02-20 17:46 ` Dave Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7ea607c2-b769-4077-9df0-79f79bb0415e@intel.com \
--to=dave.jiang@intel.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave@stgolabs.net \
--cc=fabio.m.de.francesco@linux.intel.com \
--cc=gourry@gourry.net \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rrichter@amd.com \
--cc=terry.bowman@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox