[PATCH 0/2] selftests/cgroup: Fix cpuset test portability and hotplug error handling

[PATCH 0/2] selftests/cgroup: Fix cpuset test portability and hotplug error handling

[Rui Qi]

Hi,

This series fixes two cpuset selftest issues.

Patch 1 removes awk -e from cpuset selftests. The option is accepted by
gawk, but rejected by mawk, causing mount point detection to fail on
systems where awk is provided by mawk.

Patch 2 preserves CPU hotplug write failures in test_cpuset_prs.sh. The
helper currently returns the status of pause after the write, hiding the
write failure from callers. Moving the write before the bookkeeping also
keeps OFFLINE_CPUS aligned with hotplug operations that actually
succeeded.

Testing:
- git apply --check the two patches in this series
- scripts/checkpatch.pl --strict on each patch
- bash -n tools/testing/selftests/cgroup/test_cpuset_prs.sh
- bash -n tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh
- mawk 'BEGIN {print 1}'

The full cpuset hotplug selftests were not run because they offline and
online CPUs.

Rui Qi (2):
  selftests/cgroup: Avoid awk -e in cpuset tests
  selftests/cgroup: Preserve CPU hotplug write errors

 tools/testing/selftests/cgroup/test_cpuset_prs.sh   | 5 +++--
 tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh | 2 +-
 2 files changed, 4 insertions(+), 3 deletions(-)

-- 
2.20.1

[PATCH 1/2] selftests/cgroup: Avoid awk -e in cpuset tests

[Rui Qi]

The cpuset selftests use awk -e to parse cgroup mount points. This
works with gawk, but mawk rejects the option. In test_cpuset_prs.sh,
this leaves CGROUP2 empty and causes the test to skip as if cgroup v2
were not mounted. The same non-portable invocation exists in the cpuset
v1 hotplug test.

The scripts only need to pass a single awk program. Use the standard awk
invocation without -e so mount point detection works with awk
implementations that do not support the gawk extension.

Fixes: a8c52eba880a ("kselftest/cgroup: Add cpuset v2 partition root state test")
Fixes: 812c5945bdb8 ("cgroup/cpuset: Add test_cpuset_v1_hp.sh")
Signed-off-by: Rui Qi <qirui.001@bytedance.com>
---
 tools/testing/selftests/cgroup/test_cpuset_prs.sh   | 2 +-
 tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/cgroup/test_cpuset_prs.sh b/tools/testing/selftests/cgroup/test_cpuset_prs.sh
index 400a696a0d21..16c38eb11e63 100755
--- a/tools/testing/selftests/cgroup/test_cpuset_prs.sh
+++ b/tools/testing/selftests/cgroup/test_cpuset_prs.sh
@@ -20,7 +20,7 @@ skip_test() {
 WAIT_INOTIFY=$(cd $(dirname $0); pwd)/wait_inotify
 
 # Find cgroup v2 mount point
-CGROUP2=$(mount -t cgroup2 | head -1 | awk -e '{print $3}')
+CGROUP2=$(mount -t cgroup2 | head -1 | awk '{print $3}')
 [[ -n "$CGROUP2" ]] || skip_test "Cgroup v2 mount point not found!"
 SUBPARTS_CPUS=$CGROUP2/.__DEBUG__.cpuset.cpus.subpartitions
 CPULIST=$(cat $CGROUP2/cpuset.cpus.effective)
diff --git a/tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh b/tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh
index 7406c24be1ac..da97f1643f9a 100755
--- a/tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh
+++ b/tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh
@@ -14,7 +14,7 @@ skip_test() {
 [[ $(id -u) -eq 0 ]] || skip_test "Test must be run as root!"
 
 # Find cpuset v1 mount point
-CPUSET=$(mount -t cgroup | grep cpuset | head -1 | awk -e '{print $3}')
+CPUSET=$(mount -t cgroup | grep cpuset | head -1 | awk '{print $3}')
 [[ -n "$CPUSET" ]] || skip_test "cpuset v1 mount point not found!"
 
 #
-- 
2.20.1

Re: [PATCH 1/2] selftests/cgroup: Avoid awk -e in cpuset tests

[Ridong Chen]

On 8/9/2026 4:21 PM, Rui Qi wrote:
> The cpuset selftests use awk -e to parse cgroup mount points. This
> works with gawk, but mawk rejects the option. In test_cpuset_prs.sh,
> this leaves CGROUP2 empty and causes the test to skip as if cgroup v2
> were not mounted. The same non-portable invocation exists in the cpuset
> v1 hotplug test.
> 
> The scripts only need to pass a single awk program. Use the standard awk
> invocation without -e so mount point detection works with awk
> implementations that do not support the gawk extension.
> 
> Fixes: a8c52eba880a ("kselftest/cgroup: Add cpuset v2 partition root state test")
> Fixes: 812c5945bdb8 ("cgroup/cpuset: Add test_cpuset_v1_hp.sh")
> Signed-off-by: Rui Qi <qirui.001@bytedance.com>
> ---
>   tools/testing/selftests/cgroup/test_cpuset_prs.sh   | 2 +-
>   tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh | 2 +-
>   2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/tools/testing/selftests/cgroup/test_cpuset_prs.sh b/tools/testing/selftests/cgroup/test_cpuset_prs.sh
> index 400a696a0d21..16c38eb11e63 100755
> --- a/tools/testing/selftests/cgroup/test_cpuset_prs.sh
> +++ b/tools/testing/selftests/cgroup/test_cpuset_prs.sh
> @@ -20,7 +20,7 @@ skip_test() {
>   WAIT_INOTIFY=$(cd $(dirname $0); pwd)/wait_inotify
>   
>   # Find cgroup v2 mount point
> -CGROUP2=$(mount -t cgroup2 | head -1 | awk -e '{print $3}')
> +CGROUP2=$(mount -t cgroup2 | head -1 | awk '{print $3}')
>   [[ -n "$CGROUP2" ]] || skip_test "Cgroup v2 mount point not found!"
>   SUBPARTS_CPUS=$CGROUP2/.__DEBUG__.cpuset.cpus.subpartitions
>   CPULIST=$(cat $CGROUP2/cpuset.cpus.effective)
> diff --git a/tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh b/tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh
> index 7406c24be1ac..da97f1643f9a 100755
> --- a/tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh
> +++ b/tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh
> @@ -14,7 +14,7 @@ skip_test() {
>   [[ $(id -u) -eq 0 ]] || skip_test "Test must be run as root!"
>   
>   # Find cpuset v1 mount point
> -CPUSET=$(mount -t cgroup | grep cpuset | head -1 | awk -e '{print $3}')
> +CPUSET=$(mount -t cgroup | grep cpuset | head -1 | awk '{print $3}')
>   [[ -n "$CPUSET" ]] || skip_test "cpuset v1 mount point not found!"
>   
>   #

Looks good to me.

Reviewed-by: Ridong Chen <ridong.chen@linux.dev>

-- 
Best regards
Ridong

[PATCH 2/2] selftests/cgroup: Preserve CPU hotplug write errors

[Rui Qi]

The cpuset partition root state selftest checks several CPU hotplug
transitions. If writing to a CPU online file fails, the helper still
runs pause afterwards and returns the status of pause instead of the
failed write.

This hides the real hotplug failure and can make later checks run
against expectations for a transition that never happened. Move the
write before the bookkeeping and return when it fails, so callers can
observe the hotplug error and the test does not record a CPU as offline
unless the offline operation actually succeeded.

Fixes: a8c52eba880a ("kselftest/cgroup: Add cpuset v2 partition root state test")
Signed-off-by: Rui Qi <qirui.001@bytedance.com>
---
 tools/testing/selftests/cgroup/test_cpuset_prs.sh | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/cgroup/test_cpuset_prs.sh b/tools/testing/selftests/cgroup/test_cpuset_prs.sh
index 16c38eb11e63..a2f7208633bc 100755
--- a/tools/testing/selftests/cgroup/test_cpuset_prs.sh
+++ b/tools/testing/selftests/cgroup/test_cpuset_prs.sh
@@ -412,6 +412,7 @@ write_cpu_online()
 	CPU=${1%=*}
 	VAL=${1#*=}
 	CPUFILE=//sys/devices/system/cpu/cpu${CPU}/online
+	echo $VAL > $CPUFILE || return 1
 	if [[ $VAL -eq 0 ]]
 	then
 		OFFLINE_CPUS="$OFFLINE_CPUS $CPU"
@@ -421,7 +422,6 @@ write_cpu_online()
 					sort | uniq -u)
 		}
 	fi
-	echo $VAL > $CPUFILE
 	pause 0.05
 }
 
@@ -493,6 +493,7 @@ set_ctrl_state()
 			eval $COMM $REDIRECT
 			;;
 		    O*) VAL=${CMD#?}
+			COMM="write_cpu_online $VAL"
 			write_cpu_online $VAL
 			;;
 		    T*) COMM="echo 0 > $TFILE"
-- 
2.20.1

Re: [PATCH 2/2] selftests/cgroup: Preserve CPU hotplug write errors

[Ridong Chen]

On 8/9/2026 4:21 PM, Rui Qi wrote:
> The cpuset partition root state selftest checks several CPU hotplug
> transitions. If writing to a CPU online file fails, the helper still
> runs pause afterwards and returns the status of pause instead of the
> failed write.
> 
> This hides the real hotplug failure and can make later checks run
> against expectations for a transition that never happened. Move the
> write before the bookkeeping and return when it fails, so callers can
> observe the hotplug error and the test does not record a CPU as offline
> unless the offline operation actually succeeded.
> 
> Fixes: a8c52eba880a ("kselftest/cgroup: Add cpuset v2 partition root state test")
> Signed-off-by: Rui Qi <qirui.001@bytedance.com>
> ---
>   tools/testing/selftests/cgroup/test_cpuset_prs.sh | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/tools/testing/selftests/cgroup/test_cpuset_prs.sh b/tools/testing/selftests/cgroup/test_cpuset_prs.sh
> index 16c38eb11e63..a2f7208633bc 100755
> --- a/tools/testing/selftests/cgroup/test_cpuset_prs.sh
> +++ b/tools/testing/selftests/cgroup/test_cpuset_prs.sh
> @@ -412,6 +412,7 @@ write_cpu_online()
>   	CPU=${1%=*}
>   	VAL=${1#*=}
>   	CPUFILE=//sys/devices/system/cpu/cpu${CPU}/online
> +	echo $VAL > $CPUFILE || return 1
>   	if [[ $VAL -eq 0 ]]
>   	then
>   		OFFLINE_CPUS="$OFFLINE_CPUS $CPU"
> @@ -421,7 +422,6 @@ write_cpu_online()
>   					sort | uniq -u)
>   		}
>   	fi
> -	echo $VAL > $CPUFILE
>   	pause 0.05
>   }
>   
> @@ -493,6 +493,7 @@ set_ctrl_state()
>   			eval $COMM $REDIRECT
>   			;;
>   		    O*) VAL=${CMD#?}
> +			COMM="write_cpu_online $VAL"
>   			write_cpu_online $VAL
>   			;;
>   		    T*) COMM="echo 0 > $TFILE"

LGTM.

Reviewed-by: Ridong Chen <ridong.chen@linux.dev>

-- 
Best regards
Ridong