* [PATCH v2] ARM: dts: exynos: remove no longer needed samsung thermal properties
[not found] <CGME20180621103531eucas1p15ccaf3a2069fe5a188daaeb8e2a29a93@eucas1p1.samsung.com>
@ 2018-06-21 10:35 ` Bartlomiej Zolnierkiewicz
2018-06-22 18:27 ` Krzysztof Kozlowski
0 siblings, 1 reply; 2+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2018-06-21 10:35 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Kukjin Kim, Eduardo Valentin, Zhang Rui, Daniel Lezcano,
linux-samsung-soc, linux-pm, linux-kernel, b.zolnierkie
Remove no longer needed samsung thermal properties.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
v2:
- rebased against current -next kernel
arch/arm/boot/dts/exynos3250.dtsi | 2 +-
arch/arm/boot/dts/exynos4.dtsi | 2 +-
arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi | 20 --------------------
arch/arm/boot/dts/exynos5250.dtsi | 2 +-
arch/arm/boot/dts/exynos5410.dtsi | 8 ++++----
arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi | 21 ---------------------
arch/arm/boot/dts/exynos5420.dtsi | 10 +++++-----
7 files changed, 12 insertions(+), 53 deletions(-)
Index: b/arch/arm/boot/dts/exynos3250.dtsi
===================================================================
--- a/arch/arm/boot/dts/exynos3250.dtsi 2018-06-21 12:17:32.107322153 +0200
+++ b/arch/arm/boot/dts/exynos3250.dtsi 2018-06-21 12:17:32.091322153 +0200
@@ -242,7 +242,7 @@
interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
status = "disabled";
};
Index: b/arch/arm/boot/dts/exynos4.dtsi
===================================================================
--- a/arch/arm/boot/dts/exynos4.dtsi 2018-06-21 12:17:32.107322153 +0200
+++ b/arch/arm/boot/dts/exynos4.dtsi 2018-06-21 12:17:32.091322153 +0200
@@ -735,7 +735,7 @@
reg = <0x100C0000 0x100>;
interrupts = <2 4>;
status = "disabled";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
jpeg_codec: jpeg-codec@11840000 {
Index: b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
===================================================================
--- a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi 2018-06-21 12:17:32.107322153 +0200
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos4412 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <55>;
-samsung,tmu_min_efuse_value = <40>;
-samsung,tmu_max_efuse_value = <100>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
Index: b/arch/arm/boot/dts/exynos5250.dtsi
===================================================================
--- a/arch/arm/boot/dts/exynos5250.dtsi 2018-06-21 12:17:32.107322153 +0200
+++ b/arch/arm/boot/dts/exynos5250.dtsi 2018-06-21 12:17:32.091322153 +0200
@@ -301,7 +301,7 @@
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
sata: sata@122f0000 {
Index: b/arch/arm/boot/dts/exynos5410.dtsi
===================================================================
--- a/arch/arm/boot/dts/exynos5410.dtsi 2018-06-21 12:17:32.107322153 +0200
+++ b/arch/arm/boot/dts/exynos5410.dtsi 2018-06-21 12:17:32.091322153 +0200
@@ -93,7 +93,7 @@
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
tmu_cpu1: tmu@10064000 {
@@ -102,7 +102,7 @@
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
tmu_cpu2: tmu@10068000 {
@@ -111,7 +111,7 @@
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
tmu_cpu3: tmu@1006c000 {
@@ -120,7 +120,7 @@
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
mmc_0: mmc@12200000 {
Index: b/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
===================================================================
--- a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi 2018-06-21 12:17:32.107322153 +0200
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos5420 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- * Copyright (c) 2017 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <55>;
-samsung,tmu_min_efuse_value = <0>;
-samsung,tmu_max_efuse_value = <100>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
Index: b/arch/arm/boot/dts/exynos5420.dtsi
===================================================================
--- a/arch/arm/boot/dts/exynos5420.dtsi 2018-06-21 12:17:32.107322153 +0200
+++ b/arch/arm/boot/dts/exynos5420.dtsi 2018-06-21 12:17:32.095322153 +0200
@@ -738,7 +738,7 @@
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
- #include "exynos5420-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
tmu_cpu1: tmu@10064000 {
@@ -747,7 +747,7 @@
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
- #include "exynos5420-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
tmu_cpu2: tmu@10068000 {
@@ -756,7 +756,7 @@
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos5420-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
tmu_cpu3: tmu@1006c000 {
@@ -765,7 +765,7 @@
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos5420-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
tmu_gpu: tmu@100a0000 {
@@ -774,7 +774,7 @@
interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos5420-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
sysmmu_g2dr: sysmmu@10a60000 {
^ permalink raw reply [flat|nested] 2+ messages in thread