From: sathyanarayanan kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>
To: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Cc: andy@infradead.org, qipeng.zha@intel.com, dvhart@infradead.org,
david.e.box@linux.intel.com, platform-driver-x86@vger.kernel.org,
linux-kernel@vger.kernel.org, shanth.murthy@intel.com
Subject: Re: [PATCH v2 2/4] platform/x86: intel_pmc_ipc: Add pmc gcr read/write api's
Date: Fri, 17 Mar 2017 10:11:59 -0700 [thread overview]
Message-ID: <878415e5-7731-1dd8-8609-6d59daef5e15@linux.intel.com> (raw)
In-Reply-To: <20170317112633.GD24582@rajaneesh-OptiPlex-9010>
Hi,
On 03/17/2017 04:26 AM, Rajneesh Bhardwaj wrote:
> On Thu, Mar 16, 2017 at 05:41:34PM -0700, Kuppuswamy Sathyanarayanan wrote:
>> This patch adds API's to read/write PMC GC registers.
>> PMC dependent devices like iTCO_WDT, Telemetry has requirement
>> to acces GCR registers. These API's can be used for this
>> purpose.
>>
>> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>> ---
>> arch/x86/include/asm/intel_pmc_ipc.h | 16 ++++++++++++++++
>> drivers/platform/x86/intel_pmc_ipc.c | 14 ++++++++++++++
>> 2 files changed, 30 insertions(+)
>>
>> diff --git a/arch/x86/include/asm/intel_pmc_ipc.h b/arch/x86/include/asm/intel_pmc_ipc.h
>> index 4291b6a..017429d 100644
>> --- a/arch/x86/include/asm/intel_pmc_ipc.h
>> +++ b/arch/x86/include/asm/intel_pmc_ipc.h
>> @@ -23,6 +23,10 @@
>> #define IPC_ERR_EMSECURITY 6
>> #define IPC_ERR_UNSIGNEDKERNEL 7
>>
>> +/* GCR reg offsets from gcr base*/
>> +#define PMC_GCR_PRSTS_REG 0x00
> remove.
Will remove it in next series.
>
>> +#define PMC_GCR_PMC_CFG_REG 0x08
>> +
>> #if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
>>
>> int intel_pmc_ipc_simple_command(int cmd, int sub);
>> @@ -31,6 +35,8 @@ int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen,
>> int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
>> u32 *out, u32 outlen);
>> int intel_pmc_s0ix_counter_read(u64 *data);
>> +u32 intel_pmc_gcr_read(u32 offset);
> consider changing the signature to read data as out param and use return
> value for better error handling since exported API can be called from
> anywhere in the kernel.
I can add check to make sure offset is within GCR range.
>
>> +void intel_pmc_gcr_write(u32 offset, u32 data);
> ditto.
Same as above.
>
>>
>> #else
>>
>> @@ -56,6 +62,16 @@ static inline int intel_pmc_s0ix_counter_read(u64 *data)
>> return -EINVAL;
>> }
>>
>> +static inline u32 intel_pmc_gcr_read(u32 offset)
>> +{
>> + return -EINVAL;
>> +}
>> +
> samew as above.
Same as above.
>
>> +static inline void intel_pmc_gcr_write(u32 offset, u32 data)
>> +{
>> + return;
>> +}
>> +
> ditto.
Same as above.
>
>> #endif /*CONFIG_INTEL_PMC_IPC*/
>>
>> #endif
>> diff --git a/drivers/platform/x86/intel_pmc_ipc.c b/drivers/platform/x86/intel_pmc_ipc.c
>> index 0a33592..12018f3 100644
>> --- a/drivers/platform/x86/intel_pmc_ipc.c
>> +++ b/drivers/platform/x86/intel_pmc_ipc.c
>> @@ -127,6 +127,7 @@ static struct intel_pmc_ipc_dev {
>>
>> /* gcr */
>> resource_size_t gcr_base;
>> + void __iomem *gcr_mem_base;
>> int gcr_size;
>> bool has_gcr_regs;
>>
>> @@ -199,6 +200,18 @@ static inline u64 gcr_data_readq(u32 offset)
>> return readq(ipcdev.ipc_base + offset);
>> }
>>
>> +u32 intel_pmc_gcr_read(u32 offset)
>> +{
>> + return readl(ipcdev.gcr_mem_base + offset);
>> +}
> what happens when this is called with a wrong offset on IPC enabled
> platforms?
>
>> +EXPORT_SYMBOL_GPL(intel_pmc_gcr_read);
>> +
>> +void intel_pmc_gcr_write(u32 offset, u32 data)
>> +{
>> + writel(data, ipcdev.gcr_mem_base + offset);
>> +}
> same as above.
>
>> +EXPORT_SYMBOL_GPL(intel_pmc_gcr_write);
>> +
>> static int intel_pmc_ipc_check_status(void)
>> {
>> int status;
>> @@ -747,6 +760,7 @@ static int ipc_plat_get_res(struct platform_device *pdev)
>> ipcdev.ipc_base = addr;
>>
>> ipcdev.gcr_base = res->start + PLAT_RESOURCE_GCR_OFFSET;
>> + ipcdev.gcr_mem_base = addr + PLAT_RESOURCE_GCR_OFFSET;
>> ipcdev.gcr_size = PLAT_RESOURCE_GCR_SIZE;
>> dev_info(&pdev->dev, "ipc res: %pR\n", res);
>>
>> --
>> 2.7.4
>>
--
Sathyanarayanan Kuppuswamy
Android kernel developer
next prev parent reply other threads:[~2017-03-17 17:36 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-16 3:32 [PATCH v1 1/1] platform/x86: intel_pmc_ipc: fix io mem mapping size Kuppuswamy Sathyanarayanan
2017-03-16 14:52 ` Rajneesh Bhardwaj
2017-03-16 16:05 ` Andy Shevchenko
2017-03-16 18:13 ` Rajneesh Bhardwaj
2017-03-16 20:12 ` Andy Shevchenko
2017-03-16 21:15 ` sathyanarayanan kuppuswamy
2017-03-16 18:50 ` sathyanarayanan kuppuswamy
2017-03-16 19:20 ` Rajneesh Bhardwaj
2017-03-16 21:05 ` sathyanarayanan kuppuswamy
2017-03-17 0:41 ` [PATCH v2 1/4] platform/x86: intel_pmc_ipc: fix gcr offset Kuppuswamy Sathyanarayanan
2017-03-17 0:41 ` [PATCH v2 2/4] platform/x86: intel_pmc_ipc: Add pmc gcr read/write api's Kuppuswamy Sathyanarayanan
2017-03-17 11:26 ` Rajneesh Bhardwaj
2017-03-17 17:11 ` sathyanarayanan kuppuswamy [this message]
2017-03-17 0:41 ` [PATCH v2 3/4] watchdog: iTCO_wdt: Fix PMC GCR memory mapping failure Kuppuswamy Sathyanarayanan
2017-03-17 11:43 ` Rajneesh Bhardwaj
2017-03-17 13:40 ` Guenter Roeck
2017-03-17 14:05 ` Rajneesh Bhardwaj
2017-03-17 14:25 ` Andy Shevchenko
2017-03-17 17:37 ` sathyanarayanan kuppuswamy
2017-03-17 18:38 ` Andy Shevchenko
2017-03-17 18:50 ` sathyanarayanan kuppuswamy
2017-03-17 17:24 ` sathyanarayanan kuppuswamy
2017-03-17 17:50 ` Guenter Roeck
2017-03-17 18:39 ` sathyanarayanan kuppuswamy
2017-03-17 17:15 ` sathyanarayanan kuppuswamy
2017-03-20 2:52 ` kbuild test robot
2017-03-17 0:41 ` [PATCH v2 4/4] platform/x86: intel_pmc_ipc: remove iTCO GCR mem resource Kuppuswamy Sathyanarayanan
2017-03-17 11:47 ` Rajneesh Bhardwaj
2017-03-17 11:13 ` [PATCH v2 1/4] platform/x86: intel_pmc_ipc: fix gcr offset Rajneesh Bhardwaj
2017-03-17 17:06 ` sathyanarayanan kuppuswamy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=878415e5-7731-1dd8-8609-6d59daef5e15@linux.intel.com \
--to=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=andy@infradead.org \
--cc=david.e.box@linux.intel.com \
--cc=dvhart@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=qipeng.zha@intel.com \
--cc=rajneesh.bhardwaj@intel.com \
--cc=shanth.murthy@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox