Re: [PATCH 3/4] arm64: dts: qcom: sa8775p: add support for video node

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 3/17/25 12:31 PM, Dmitry Baryshkov wrote:
> On Tue, Mar 11, 2025 at 05:33:55PM +0530, Vikash Garodia wrote:
>> Video node enables video on Qualcomm SA8775P platform.
>>
>> Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
>> ---
>>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 67 +++++++++++++++++++++++++++++++++++
>>  1 file changed, 67 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>> index 3394ae2d13003417a15e64c9e47833725ec779e6..09db8e2eb578f1cada0f4a15e3f844dc097bd46d 100644
>> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>> @@ -10,6 +10,7 @@
>>  #include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
>>  #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
>>  #include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
>> +#include <dt-bindings/clock/qcom,sa8775p-videocc.h>
>>  #include <dt-bindings/dma/qcom-gpi.h>
>>  #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
>>  #include <dt-bindings/mailbox/qcom-ipcc.h>
>> @@ -3783,6 +3784,72 @@ llcc: system-cache-controller@9200000 {
>>  			interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
>>  		};
>>  
>> +		iris: video-codec@aa00000 {
>> +			compatible = "qcom,sa8775p-iris";
>> +
>> +			reg = <0 0x0aa00000 0 0xf0000>;
>> +			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
>> +
>> +			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
>> +					<&videocc VIDEO_CC_MVS0_GDSC>,
>> +					<&rpmhpd SA8775P_MXC>,
>> +					<&rpmhpd SA8775P_MMCX>;
>> +			power-domain-names = "venus",
>> +					     "vcodec0",
>> +					     "mx",
>> +					     "mmcx";
>> +			operating-points-v2 = <&iris_opp_table>;
>> +
>> +			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
>> +				 <&videocc VIDEO_CC_MVS0C_CLK>,
>> +				 <&videocc VIDEO_CC_MVS0_CLK>;
>> +			clock-names = "iface",
>> +				      "core",
>> +				      "vcodec0_core";
>> +
>> +			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
>> +					&config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ALWAYS>,
>> +					<&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
>> +					&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
>> +			interconnect-names = "cpu-cfg",
>> +					     "video-mem";
>> +
>> +			firmware-name = "qcom/vpu/vpu30_p4_s6.mbn";
>> +			memory-region = <&pil_video_mem>;
>> +
>> +			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
>> +			reset-names = "bus";
>> +
>> +			iommus = <&apps_smmu 0x0880 0x0400>,
>> +				 <&apps_smmu 0x0887 0x0400>;
>> +			dma-coherent;
> 
> I think almost missed it:
> 
> 	status = "disabled";
> 
> Don't enable the device by default, there is a chance of the firmware
> being not present.

On a sidenote, venus driver broke sync_state by requesting the firmware at
load time, instead of at the time of first open (though the latter could
introduce some latency on first video playback, but both are debatable) -
what does iris do here?

Konrad>