Re: [PATCH v10 02/14] platform/x86: alienware-wmi: Add WMI Drivers

["Kurt Borja" <kuurtb@gmail.com>]

On Tue Feb 11, 2025 at 11:30 AM -05, Andy Shevchenko wrote:
> On Fri, Feb 07, 2025 at 10:45:58AM -0500, Kurt Borja wrote:
>> Add WMI drivers for LEGACY and WMAX devices.
>> 
>> This involves moving the platform device registration to a helper
>> function that is now called from the driver's preferred WMI device
>> driver probe. In the case of the WMAX this is done only if
>> `!quirks->thermal` because the newer WMAX interface doesn't support any
>> of the LED features of this driver. This also eliminates the need to
>> check for `quirks->num_zones > 0` inside alienfx_probe().
>> 
>> Only one WMI driver is registered on module initialization to prevent
>> registering a duplicate platform device.
>> 
>> Additionally, create_thermal_profile() now takes wmi_device * instead of
>> platform_device *.
>
> ...
>
>> +static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
>> +{
>> +	struct device *dev = &pdata->wdev->dev;
>> +	struct platform_device *pdev;
>>  	int ret;
>>  
>> +	pdev = platform_device_register_data(NULL, "alienware-wmi",
>> +					     PLATFORM_DEVID_NONE, pdata,
>> +					     sizeof(*pdata));
>> +	if (IS_ERR(pdev))
>> +		return PTR_ERR(pdev);
>> +
>> +	dev_set_drvdata(dev, pdev);
>> +	ret = devm_add_action_or_reset(dev, alienware_alienfx_remove, pdev);
>> +	if (ret)
>> +		return ret;
>> +
>> +	return 0;
>
> 	return devm_add_action_or_reset(...);

Right!

>
>> +}
>
> ...
>
>> +static const struct wmi_device_id alienware_legacy_device_id_table[] = {
>> +	{ LEGACY_CONTROL_GUID, NULL },
>
> Drop that ' , NULL' part, it makes an additional burden if the type of the
> driver_data is ever changed.

Makes sense.

>
>> +	{ },
>
> No comma in the terminator entries.

Makes sense.

>
>> +};
>
> ...
>
>> +static const struct wmi_device_id alienware_wmax_device_id_table[] = {
>> +	{ WMAX_CONTROL_GUID, NULL },
>> +	{ },
>> +};
>
> Ditto.
>
> ...
>
>> +static int __init alienware_wmax_wmi_init(void)
>> +{
>> +	return wmi_driver_register(&alienware_wmax_wmi_driver);
>> +}
>> +
>> +static void __exit alienware_wmax_wmi_exit(void)
>> +{
>> +	wmi_driver_unregister(&alienware_wmax_wmi_driver);
>> +}
>
> I believe we have module_wmi_driver() which can be used after the split
> (haven't checked those patches yet).

This module has two WMI drivers, so I believe this can't be used.

-- 
 ~ Kurt