[PATCH v6 00/12] platform/x86: alienware-wmi-wmax: HWMON support + DebugFS + Improvements

[PATCH v6 00/12] platform/x86: alienware-wmi-wmax: HWMON support + DebugFS + Improvements

[Kurt Borja]

Hi all,

This set mainly adds hwmon and manual fan control support (patches 7-8)
to the alienware-wmi driver, after some improvements.

Thank you for your feedback :)

---
Changes in v6:

[08/12]
  - Define dev_pm_ops statically (kernel test robot)

Link to v5: https://lore.kernel.org/r/20250312-hwm-v5-0-deb15ff8f3c6@gmail.com

---
Kurt Borja (12):
      platform/x86: alienware-wmi-wmax: Rename thermal related symbols
      platform/x86: alienware-wmi-wmax: Refactor is_awcc_thermal_mode()
      platform/x86: alienware-wmi-wmax: Improve internal AWCC API
      platform/x86: alienware-wmi-wmax: Modify supported_thermal_profiles[]
      platform/x86: alienware-wmi-wmax: Improve platform profile probe
      platform/x86: alienware-wmi-wmax: Add support for the "custom" thermal profile
      platform/x86: alienware-wmi-wmax: Add HWMON support
      platform/x86: alienware-wmi-wmax: Add support for manual fan control
      platform/x86: alienware-wmi-wmax: Add a DebugFS interface
      Documentation: wmi: Improve and update alienware-wmi documentation
      Documentation: admin-guide: laptops: Add documentation for alienware-wmi
      Documentation: ABI: Add sysfs platform and debugfs ABI documentation for alienware-wmi

 Documentation/ABI/testing/debugfs-alienware-wmi    |   44 +
 .../ABI/testing/sysfs-platform-alienware-wmi       |   14 +
 .../admin-guide/laptops/alienware-wmi.rst          |  128 +++
 Documentation/admin-guide/laptops/index.rst        |    1 +
 Documentation/wmi/devices/alienware-wmi.rst        |  383 +++-----
 MAINTAINERS                                        |    3 +
 drivers/platform/x86/dell/Kconfig                  |    1 +
 drivers/platform/x86/dell/alienware-wmi-wmax.c     | 1023 +++++++++++++++++---
 8 files changed, 1187 insertions(+), 410 deletions(-)
---
base-commit: f895f2493098b862f1ada0568aba278e49bf05b4
change-id: 20250305-hwm-f7bd91902b57

Best regards,
-- 
 ~ Kurt

[PATCH v6 01/12] platform/x86: alienware-wmi-wmax: Rename thermal related symbols

[Kurt Borja]

The "thermal" features of the WMAX WMI device are only present on the
host device if the ACPI _UID is "AWCC". Replace WMAX prefixes with
"AWCC" to reflect this relationship.

Thermal profiles with WMAX_PROFILE_BASIC prefix are also renamed to
WMAX_PROFILE_LEGACY because they are only supported in older versions
of this WMI device.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi-wmax.c | 173 +++++++++++++------------
 1 file changed, 87 insertions(+), 86 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
index 3d3014b5adf046c94c1ebf39a0e28a92622b40d6..ed70e12d73d7fe5d89f3364c5367820bf47e3c1e 100644
--- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
+++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
@@ -24,16 +24,17 @@
 #define WMAX_METHOD_DEEP_SLEEP_STATUS		0x0C
 #define WMAX_METHOD_BRIGHTNESS			0x3
 #define WMAX_METHOD_ZONE_CONTROL		0x4
-#define WMAX_METHOD_THERMAL_INFORMATION		0x14
-#define WMAX_METHOD_THERMAL_CONTROL		0x15
-#define WMAX_METHOD_GAME_SHIFT_STATUS		0x25
 
-#define WMAX_THERMAL_MODE_GMODE			0xAB
+#define AWCC_METHOD_THERMAL_INFORMATION		0x14
+#define AWCC_METHOD_THERMAL_CONTROL		0x15
+#define AWCC_METHOD_GAME_SHIFT_STATUS		0x25
 
-#define WMAX_FAILURE_CODE			0xFFFFFFFF
-#define WMAX_THERMAL_TABLE_MASK			GENMASK(7, 4)
-#define WMAX_THERMAL_MODE_MASK			GENMASK(3, 0)
-#define WMAX_SENSOR_ID_MASK			BIT(8)
+#define AWCC_THERMAL_MODE_GMODE			0xAB
+
+#define AWCC_FAILURE_CODE			0xFFFFFFFF
+#define AWCC_THERMAL_TABLE_MASK			GENMASK(7, 4)
+#define AWCC_THERMAL_MODE_MASK			GENMASK(3, 0)
+#define AWCC_SENSOR_ID_MASK			BIT(8)
 
 static bool force_platform_profile;
 module_param_unsafe(force_platform_profile, bool, 0);
@@ -151,38 +152,38 @@ static const struct dmi_system_id awcc_dmi_table[] __initconst = {
 	},
 };
 
-enum WMAX_THERMAL_INFORMATION_OPERATIONS {
-	WMAX_OPERATION_SYS_DESCRIPTION		= 0x02,
-	WMAX_OPERATION_LIST_IDS			= 0x03,
-	WMAX_OPERATION_CURRENT_PROFILE		= 0x0B,
+enum AWCC_THERMAL_INFORMATION_OPERATIONS {
+	AWCC_OP_GET_SYSTEM_DESCRIPTION		= 0x02,
+	AWCC_OP_GET_RESOURCE_ID			= 0x03,
+	AWCC_OP_GET_CURRENT_PROFILE		= 0x0B,
 };
 
-enum WMAX_THERMAL_CONTROL_OPERATIONS {
-	WMAX_OPERATION_ACTIVATE_PROFILE		= 0x01,
+enum AWCC_THERMAL_CONTROL_OPERATIONS {
+	AWCC_OP_ACTIVATE_PROFILE		= 0x01,
 };
 
-enum WMAX_GAME_SHIFT_STATUS_OPERATIONS {
-	WMAX_OPERATION_TOGGLE_GAME_SHIFT	= 0x01,
-	WMAX_OPERATION_GET_GAME_SHIFT_STATUS	= 0x02,
+enum AWCC_GAME_SHIFT_STATUS_OPERATIONS {
+	AWCC_OP_TOGGLE_GAME_SHIFT		= 0x01,
+	AWCC_OP_GET_GAME_SHIFT_STATUS		= 0x02,
 };
 
-enum WMAX_THERMAL_TABLES {
-	WMAX_THERMAL_TABLE_BASIC		= 0x90,
-	WMAX_THERMAL_TABLE_USTT			= 0xA0,
+enum AWCC_THERMAL_TABLES {
+	AWCC_THERMAL_TABLE_LEGACY		= 0x90,
+	AWCC_THERMAL_TABLE_USTT			= 0xA0,
 };
 
-enum wmax_thermal_mode {
-	THERMAL_MODE_USTT_BALANCED,
-	THERMAL_MODE_USTT_BALANCED_PERFORMANCE,
-	THERMAL_MODE_USTT_COOL,
-	THERMAL_MODE_USTT_QUIET,
-	THERMAL_MODE_USTT_PERFORMANCE,
-	THERMAL_MODE_USTT_LOW_POWER,
-	THERMAL_MODE_BASIC_QUIET,
-	THERMAL_MODE_BASIC_BALANCED,
-	THERMAL_MODE_BASIC_BALANCED_PERFORMANCE,
-	THERMAL_MODE_BASIC_PERFORMANCE,
-	THERMAL_MODE_LAST,
+enum awcc_thermal_profile {
+	AWCC_PROFILE_USTT_BALANCED,
+	AWCC_PROFILE_USTT_BALANCED_PERFORMANCE,
+	AWCC_PROFILE_USTT_COOL,
+	AWCC_PROFILE_USTT_QUIET,
+	AWCC_PROFILE_USTT_PERFORMANCE,
+	AWCC_PROFILE_USTT_LOW_POWER,
+	AWCC_PROFILE_LEGACY_QUIET,
+	AWCC_PROFILE_LEGACY_BALANCED,
+	AWCC_PROFILE_LEGACY_BALANCED_PERFORMANCE,
+	AWCC_PROFILE_LEGACY_PERFORMANCE,
+	AWCC_PROFILE_LAST,
 };
 
 struct wmax_led_args {
@@ -210,20 +211,20 @@ struct wmax_u32_args {
 struct awcc_priv {
 	struct wmi_device *wdev;
 	struct device *ppdev;
-	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
+	enum awcc_thermal_profile supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 };
 
-static const enum platform_profile_option wmax_mode_to_platform_profile[THERMAL_MODE_LAST] = {
-	[THERMAL_MODE_USTT_BALANCED]			= PLATFORM_PROFILE_BALANCED,
-	[THERMAL_MODE_USTT_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
-	[THERMAL_MODE_USTT_COOL]			= PLATFORM_PROFILE_COOL,
-	[THERMAL_MODE_USTT_QUIET]			= PLATFORM_PROFILE_QUIET,
-	[THERMAL_MODE_USTT_PERFORMANCE]			= PLATFORM_PROFILE_PERFORMANCE,
-	[THERMAL_MODE_USTT_LOW_POWER]			= PLATFORM_PROFILE_LOW_POWER,
-	[THERMAL_MODE_BASIC_QUIET]			= PLATFORM_PROFILE_QUIET,
-	[THERMAL_MODE_BASIC_BALANCED]			= PLATFORM_PROFILE_BALANCED,
-	[THERMAL_MODE_BASIC_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
-	[THERMAL_MODE_BASIC_PERFORMANCE]		= PLATFORM_PROFILE_PERFORMANCE,
+static const enum platform_profile_option awcc_mode_to_platform_profile[AWCC_PROFILE_LAST] = {
+	[AWCC_PROFILE_USTT_BALANCED]			= PLATFORM_PROFILE_BALANCED,
+	[AWCC_PROFILE_USTT_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
+	[AWCC_PROFILE_USTT_COOL]			= PLATFORM_PROFILE_COOL,
+	[AWCC_PROFILE_USTT_QUIET]			= PLATFORM_PROFILE_QUIET,
+	[AWCC_PROFILE_USTT_PERFORMANCE]			= PLATFORM_PROFILE_PERFORMANCE,
+	[AWCC_PROFILE_USTT_LOW_POWER]			= PLATFORM_PROFILE_LOW_POWER,
+	[AWCC_PROFILE_LEGACY_QUIET]			= PLATFORM_PROFILE_QUIET,
+	[AWCC_PROFILE_LEGACY_BALANCED]			= PLATFORM_PROFILE_BALANCED,
+	[AWCC_PROFILE_LEGACY_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
+	[AWCC_PROFILE_LEGACY_PERFORMANCE]		= PLATFORM_PROFILE_PERFORMANCE,
 };
 
 static struct awcc_quirks *awcc;
@@ -444,26 +445,26 @@ const struct attribute_group wmax_deepsleep_attribute_group = {
  * Thermal Profile control
  *  - Provides thermal profile control through the Platform Profile API
  */
-static bool is_wmax_thermal_code(u32 code)
+static bool is_awcc_thermal_mode(u32 code)
 {
-	if (code & WMAX_SENSOR_ID_MASK)
+	if (code & AWCC_SENSOR_ID_MASK)
 		return false;
 
-	if ((code & WMAX_THERMAL_MODE_MASK) >= THERMAL_MODE_LAST)
+	if ((code & AWCC_THERMAL_MODE_MASK) >= AWCC_PROFILE_LAST)
 		return false;
 
-	if ((code & WMAX_THERMAL_TABLE_MASK) == WMAX_THERMAL_TABLE_BASIC &&
-	    (code & WMAX_THERMAL_MODE_MASK) >= THERMAL_MODE_BASIC_QUIET)
+	if ((code & AWCC_THERMAL_TABLE_MASK) == AWCC_THERMAL_TABLE_LEGACY &&
+	    (code & AWCC_THERMAL_MODE_MASK) >= AWCC_PROFILE_LEGACY_QUIET)
 		return true;
 
-	if ((code & WMAX_THERMAL_TABLE_MASK) == WMAX_THERMAL_TABLE_USTT &&
-	    (code & WMAX_THERMAL_MODE_MASK) <= THERMAL_MODE_USTT_LOW_POWER)
+	if ((code & AWCC_THERMAL_TABLE_MASK) == AWCC_THERMAL_TABLE_USTT &&
+	    (code & AWCC_THERMAL_MODE_MASK) <= AWCC_PROFILE_USTT_LOW_POWER)
 		return true;
 
 	return false;
 }
 
-static int wmax_thermal_information(struct wmi_device *wdev, u8 operation,
+static int awcc_thermal_information(struct wmi_device *wdev, u8 operation,
 				    u8 arg, u32 *out_data)
 {
 	struct wmax_u32_args in_args = {
@@ -474,21 +475,21 @@ static int wmax_thermal_information(struct wmi_device *wdev, u8 operation,
 	};
 	int ret;
 
-	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_INFORMATION,
+	ret = alienware_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION,
 				    &in_args, sizeof(in_args), out_data);
 	if (ret < 0)
 		return ret;
 
-	if (*out_data == WMAX_FAILURE_CODE)
+	if (*out_data == AWCC_FAILURE_CODE)
 		return -EBADRQC;
 
 	return 0;
 }
 
-static int wmax_thermal_control(struct wmi_device *wdev, u8 profile)
+static int awcc_thermal_control(struct wmi_device *wdev, u8 profile)
 {
 	struct wmax_u32_args in_args = {
-		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
+		.operation = AWCC_OP_ACTIVATE_PROFILE,
 		.arg1 = profile,
 		.arg2 = 0,
 		.arg3 = 0,
@@ -496,18 +497,18 @@ static int wmax_thermal_control(struct wmi_device *wdev, u8 profile)
 	u32 out_data;
 	int ret;
 
-	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_CONTROL,
+	ret = alienware_wmi_command(wdev, AWCC_METHOD_THERMAL_CONTROL,
 				    &in_args, sizeof(in_args), &out_data);
 	if (ret)
 		return ret;
 
-	if (out_data == WMAX_FAILURE_CODE)
+	if (out_data == AWCC_FAILURE_CODE)
 		return -EBADRQC;
 
 	return 0;
 }
 
-static int wmax_game_shift_status(struct wmi_device *wdev, u8 operation,
+static int awcc_game_shift_status(struct wmi_device *wdev, u8 operation,
 				  u32 *out_data)
 {
 	struct wmax_u32_args in_args = {
@@ -518,46 +519,46 @@ static int wmax_game_shift_status(struct wmi_device *wdev, u8 operation,
 	};
 	int ret;
 
-	ret = alienware_wmi_command(wdev, WMAX_METHOD_GAME_SHIFT_STATUS,
+	ret = alienware_wmi_command(wdev, AWCC_METHOD_GAME_SHIFT_STATUS,
 				    &in_args, sizeof(in_args), out_data);
 	if (ret < 0)
 		return ret;
 
-	if (*out_data == WMAX_FAILURE_CODE)
+	if (*out_data == AWCC_FAILURE_CODE)
 		return -EOPNOTSUPP;
 
 	return 0;
 }
 
-static int thermal_profile_get(struct device *dev,
-			       enum platform_profile_option *profile)
+static int awcc_platform_profile_get(struct device *dev,
+				     enum platform_profile_option *profile)
 {
 	struct awcc_priv *priv = dev_get_drvdata(dev);
 	u32 out_data;
 	int ret;
 
-	ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_CURRENT_PROFILE,
+	ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_CURRENT_PROFILE,
 				       0, &out_data);
 
 	if (ret < 0)
 		return ret;
 
-	if (out_data == WMAX_THERMAL_MODE_GMODE) {
+	if (out_data == AWCC_THERMAL_MODE_GMODE) {
 		*profile = PLATFORM_PROFILE_PERFORMANCE;
 		return 0;
 	}
 
-	if (!is_wmax_thermal_code(out_data))
+	if (!is_awcc_thermal_mode(out_data))
 		return -ENODATA;
 
-	out_data &= WMAX_THERMAL_MODE_MASK;
-	*profile = wmax_mode_to_platform_profile[out_data];
+	out_data &= AWCC_THERMAL_MODE_MASK;
+	*profile = awcc_mode_to_platform_profile[out_data];
 
 	return 0;
 }
 
-static int thermal_profile_set(struct device *dev,
-			       enum platform_profile_option profile)
+static int awcc_platform_profile_set(struct device *dev,
+				     enum platform_profile_option profile)
 {
 	struct awcc_priv *priv = dev_get_drvdata(dev);
 
@@ -565,8 +566,8 @@ static int thermal_profile_set(struct device *dev,
 		u32 gmode_status;
 		int ret;
 
-		ret = wmax_game_shift_status(priv->wdev,
-					     WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
+		ret = awcc_game_shift_status(priv->wdev,
+					     AWCC_OP_GET_GAME_SHIFT_STATUS,
 					     &gmode_status);
 
 		if (ret < 0)
@@ -574,8 +575,8 @@ static int thermal_profile_set(struct device *dev,
 
 		if ((profile == PLATFORM_PROFILE_PERFORMANCE && !gmode_status) ||
 		    (profile != PLATFORM_PROFILE_PERFORMANCE && gmode_status)) {
-			ret = wmax_game_shift_status(priv->wdev,
-						     WMAX_OPERATION_TOGGLE_GAME_SHIFT,
+			ret = awcc_game_shift_status(priv->wdev,
+						     AWCC_OP_TOGGLE_GAME_SHIFT,
 						     &gmode_status);
 
 			if (ret < 0)
@@ -583,21 +584,21 @@ static int thermal_profile_set(struct device *dev,
 		}
 	}
 
-	return wmax_thermal_control(priv->wdev,
+	return awcc_thermal_control(priv->wdev,
 				    priv->supported_thermal_profiles[profile]);
 }
 
-static int thermal_profile_probe(void *drvdata, unsigned long *choices)
+static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
 {
 	enum platform_profile_option profile;
 	struct awcc_priv *priv = drvdata;
-	enum wmax_thermal_mode mode;
+	enum awcc_thermal_profile mode;
 	u8 sys_desc[4];
 	u32 first_mode;
 	u32 out_data;
 	int ret;
 
-	ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_SYS_DESCRIPTION,
+	ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_SYSTEM_DESCRIPTION,
 				       0, (u32 *) &sys_desc);
 	if (ret < 0)
 		return ret;
@@ -605,7 +606,7 @@ static int thermal_profile_probe(void *drvdata, unsigned long *choices)
 	first_mode = sys_desc[0] + sys_desc[1];
 
 	for (u32 i = 0; i < sys_desc[3]; i++) {
-		ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_LIST_IDS,
+		ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_RESOURCE_ID,
 					       i + first_mode, &out_data);
 
 		if (ret == -EIO)
@@ -614,11 +615,11 @@ static int thermal_profile_probe(void *drvdata, unsigned long *choices)
 		if (ret == -EBADRQC)
 			break;
 
-		if (!is_wmax_thermal_code(out_data))
+		if (!is_awcc_thermal_mode(out_data))
 			continue;
 
-		mode = out_data & WMAX_THERMAL_MODE_MASK;
-		profile = wmax_mode_to_platform_profile[mode];
+		mode = out_data & AWCC_THERMAL_MODE_MASK;
+		profile = awcc_mode_to_platform_profile[mode];
 		priv->supported_thermal_profiles[profile] = out_data;
 
 		set_bit(profile, choices);
@@ -629,7 +630,7 @@ static int thermal_profile_probe(void *drvdata, unsigned long *choices)
 
 	if (awcc->gmode) {
 		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
-			WMAX_THERMAL_MODE_GMODE;
+			AWCC_THERMAL_MODE_GMODE;
 
 		set_bit(PLATFORM_PROFILE_PERFORMANCE, choices);
 	}
@@ -638,9 +639,9 @@ static int thermal_profile_probe(void *drvdata, unsigned long *choices)
 }
 
 static const struct platform_profile_ops awcc_platform_profile_ops = {
-	.probe = thermal_profile_probe,
-	.profile_get = thermal_profile_get,
-	.profile_set = thermal_profile_set,
+	.probe = awcc_platform_profile_probe,
+	.profile_get = awcc_platform_profile_get,
+	.profile_set = awcc_platform_profile_set,
 };
 
 static int awcc_platform_profile_init(struct wmi_device *wdev)

-- 
2.48.1

Re: [PATCH v6 01/12] platform/x86: alienware-wmi-wmax: Rename thermal related symbols

[Ilpo Järvinen]

[-- Attachment #1: Type: text/plain, Size: 14486 bytes --]

On Thu, 13 Mar 2025, Kurt Borja wrote:

> The "thermal" features of the WMAX WMI device are only present on the
> host device if the ACPI _UID is "AWCC". Replace WMAX prefixes with
> "AWCC" to reflect this relationship.
> 
> Thermal profiles with WMAX_PROFILE_BASIC prefix are also renamed to
> WMAX_PROFILE_LEGACY because they are only supported in older versions
> of this WMI device.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

I note though that this also renames OPERATION -> OP, which is fine, it 
just wasn't mentioned.

-- 
 i.


> ---
>  drivers/platform/x86/dell/alienware-wmi-wmax.c | 173 +++++++++++++------------
>  1 file changed, 87 insertions(+), 86 deletions(-)
> 
> diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> index 3d3014b5adf046c94c1ebf39a0e28a92622b40d6..ed70e12d73d7fe5d89f3364c5367820bf47e3c1e 100644
> --- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
> +++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> @@ -24,16 +24,17 @@
>  #define WMAX_METHOD_DEEP_SLEEP_STATUS		0x0C
>  #define WMAX_METHOD_BRIGHTNESS			0x3
>  #define WMAX_METHOD_ZONE_CONTROL		0x4
> -#define WMAX_METHOD_THERMAL_INFORMATION		0x14
> -#define WMAX_METHOD_THERMAL_CONTROL		0x15
> -#define WMAX_METHOD_GAME_SHIFT_STATUS		0x25
>  
> -#define WMAX_THERMAL_MODE_GMODE			0xAB
> +#define AWCC_METHOD_THERMAL_INFORMATION		0x14
> +#define AWCC_METHOD_THERMAL_CONTROL		0x15
> +#define AWCC_METHOD_GAME_SHIFT_STATUS		0x25
>  
> -#define WMAX_FAILURE_CODE			0xFFFFFFFF
> -#define WMAX_THERMAL_TABLE_MASK			GENMASK(7, 4)
> -#define WMAX_THERMAL_MODE_MASK			GENMASK(3, 0)
> -#define WMAX_SENSOR_ID_MASK			BIT(8)
> +#define AWCC_THERMAL_MODE_GMODE			0xAB
> +
> +#define AWCC_FAILURE_CODE			0xFFFFFFFF
> +#define AWCC_THERMAL_TABLE_MASK			GENMASK(7, 4)
> +#define AWCC_THERMAL_MODE_MASK			GENMASK(3, 0)
> +#define AWCC_SENSOR_ID_MASK			BIT(8)
>  
>  static bool force_platform_profile;
>  module_param_unsafe(force_platform_profile, bool, 0);
> @@ -151,38 +152,38 @@ static const struct dmi_system_id awcc_dmi_table[] __initconst = {
>  	},
>  };
>  
> -enum WMAX_THERMAL_INFORMATION_OPERATIONS {
> -	WMAX_OPERATION_SYS_DESCRIPTION		= 0x02,
> -	WMAX_OPERATION_LIST_IDS			= 0x03,
> -	WMAX_OPERATION_CURRENT_PROFILE		= 0x0B,
> +enum AWCC_THERMAL_INFORMATION_OPERATIONS {
> +	AWCC_OP_GET_SYSTEM_DESCRIPTION		= 0x02,
> +	AWCC_OP_GET_RESOURCE_ID			= 0x03,
> +	AWCC_OP_GET_CURRENT_PROFILE		= 0x0B,
>  };
>  
> -enum WMAX_THERMAL_CONTROL_OPERATIONS {
> -	WMAX_OPERATION_ACTIVATE_PROFILE		= 0x01,
> +enum AWCC_THERMAL_CONTROL_OPERATIONS {
> +	AWCC_OP_ACTIVATE_PROFILE		= 0x01,
>  };
>  
> -enum WMAX_GAME_SHIFT_STATUS_OPERATIONS {
> -	WMAX_OPERATION_TOGGLE_GAME_SHIFT	= 0x01,
> -	WMAX_OPERATION_GET_GAME_SHIFT_STATUS	= 0x02,
> +enum AWCC_GAME_SHIFT_STATUS_OPERATIONS {
> +	AWCC_OP_TOGGLE_GAME_SHIFT		= 0x01,
> +	AWCC_OP_GET_GAME_SHIFT_STATUS		= 0x02,
>  };
>  
> -enum WMAX_THERMAL_TABLES {
> -	WMAX_THERMAL_TABLE_BASIC		= 0x90,
> -	WMAX_THERMAL_TABLE_USTT			= 0xA0,
> +enum AWCC_THERMAL_TABLES {
> +	AWCC_THERMAL_TABLE_LEGACY		= 0x90,
> +	AWCC_THERMAL_TABLE_USTT			= 0xA0,
>  };
>  
> -enum wmax_thermal_mode {
> -	THERMAL_MODE_USTT_BALANCED,
> -	THERMAL_MODE_USTT_BALANCED_PERFORMANCE,
> -	THERMAL_MODE_USTT_COOL,
> -	THERMAL_MODE_USTT_QUIET,
> -	THERMAL_MODE_USTT_PERFORMANCE,
> -	THERMAL_MODE_USTT_LOW_POWER,
> -	THERMAL_MODE_BASIC_QUIET,
> -	THERMAL_MODE_BASIC_BALANCED,
> -	THERMAL_MODE_BASIC_BALANCED_PERFORMANCE,
> -	THERMAL_MODE_BASIC_PERFORMANCE,
> -	THERMAL_MODE_LAST,
> +enum awcc_thermal_profile {
> +	AWCC_PROFILE_USTT_BALANCED,
> +	AWCC_PROFILE_USTT_BALANCED_PERFORMANCE,
> +	AWCC_PROFILE_USTT_COOL,
> +	AWCC_PROFILE_USTT_QUIET,
> +	AWCC_PROFILE_USTT_PERFORMANCE,
> +	AWCC_PROFILE_USTT_LOW_POWER,
> +	AWCC_PROFILE_LEGACY_QUIET,
> +	AWCC_PROFILE_LEGACY_BALANCED,
> +	AWCC_PROFILE_LEGACY_BALANCED_PERFORMANCE,
> +	AWCC_PROFILE_LEGACY_PERFORMANCE,
> +	AWCC_PROFILE_LAST,
>  };
>  
>  struct wmax_led_args {
> @@ -210,20 +211,20 @@ struct wmax_u32_args {
>  struct awcc_priv {
>  	struct wmi_device *wdev;
>  	struct device *ppdev;
> -	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
> +	enum awcc_thermal_profile supported_thermal_profiles[PLATFORM_PROFILE_LAST];
>  };
>  
> -static const enum platform_profile_option wmax_mode_to_platform_profile[THERMAL_MODE_LAST] = {
> -	[THERMAL_MODE_USTT_BALANCED]			= PLATFORM_PROFILE_BALANCED,
> -	[THERMAL_MODE_USTT_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
> -	[THERMAL_MODE_USTT_COOL]			= PLATFORM_PROFILE_COOL,
> -	[THERMAL_MODE_USTT_QUIET]			= PLATFORM_PROFILE_QUIET,
> -	[THERMAL_MODE_USTT_PERFORMANCE]			= PLATFORM_PROFILE_PERFORMANCE,
> -	[THERMAL_MODE_USTT_LOW_POWER]			= PLATFORM_PROFILE_LOW_POWER,
> -	[THERMAL_MODE_BASIC_QUIET]			= PLATFORM_PROFILE_QUIET,
> -	[THERMAL_MODE_BASIC_BALANCED]			= PLATFORM_PROFILE_BALANCED,
> -	[THERMAL_MODE_BASIC_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
> -	[THERMAL_MODE_BASIC_PERFORMANCE]		= PLATFORM_PROFILE_PERFORMANCE,
> +static const enum platform_profile_option awcc_mode_to_platform_profile[AWCC_PROFILE_LAST] = {
> +	[AWCC_PROFILE_USTT_BALANCED]			= PLATFORM_PROFILE_BALANCED,
> +	[AWCC_PROFILE_USTT_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
> +	[AWCC_PROFILE_USTT_COOL]			= PLATFORM_PROFILE_COOL,
> +	[AWCC_PROFILE_USTT_QUIET]			= PLATFORM_PROFILE_QUIET,
> +	[AWCC_PROFILE_USTT_PERFORMANCE]			= PLATFORM_PROFILE_PERFORMANCE,
> +	[AWCC_PROFILE_USTT_LOW_POWER]			= PLATFORM_PROFILE_LOW_POWER,
> +	[AWCC_PROFILE_LEGACY_QUIET]			= PLATFORM_PROFILE_QUIET,
> +	[AWCC_PROFILE_LEGACY_BALANCED]			= PLATFORM_PROFILE_BALANCED,
> +	[AWCC_PROFILE_LEGACY_BALANCED_PERFORMANCE]	= PLATFORM_PROFILE_BALANCED_PERFORMANCE,
> +	[AWCC_PROFILE_LEGACY_PERFORMANCE]		= PLATFORM_PROFILE_PERFORMANCE,
>  };
>  
>  static struct awcc_quirks *awcc;
> @@ -444,26 +445,26 @@ const struct attribute_group wmax_deepsleep_attribute_group = {
>   * Thermal Profile control
>   *  - Provides thermal profile control through the Platform Profile API
>   */
> -static bool is_wmax_thermal_code(u32 code)
> +static bool is_awcc_thermal_mode(u32 code)
>  {
> -	if (code & WMAX_SENSOR_ID_MASK)
> +	if (code & AWCC_SENSOR_ID_MASK)
>  		return false;
>  
> -	if ((code & WMAX_THERMAL_MODE_MASK) >= THERMAL_MODE_LAST)
> +	if ((code & AWCC_THERMAL_MODE_MASK) >= AWCC_PROFILE_LAST)
>  		return false;
>  
> -	if ((code & WMAX_THERMAL_TABLE_MASK) == WMAX_THERMAL_TABLE_BASIC &&
> -	    (code & WMAX_THERMAL_MODE_MASK) >= THERMAL_MODE_BASIC_QUIET)
> +	if ((code & AWCC_THERMAL_TABLE_MASK) == AWCC_THERMAL_TABLE_LEGACY &&
> +	    (code & AWCC_THERMAL_MODE_MASK) >= AWCC_PROFILE_LEGACY_QUIET)
>  		return true;
>  
> -	if ((code & WMAX_THERMAL_TABLE_MASK) == WMAX_THERMAL_TABLE_USTT &&
> -	    (code & WMAX_THERMAL_MODE_MASK) <= THERMAL_MODE_USTT_LOW_POWER)
> +	if ((code & AWCC_THERMAL_TABLE_MASK) == AWCC_THERMAL_TABLE_USTT &&
> +	    (code & AWCC_THERMAL_MODE_MASK) <= AWCC_PROFILE_USTT_LOW_POWER)
>  		return true;
>  
>  	return false;
>  }
>  
> -static int wmax_thermal_information(struct wmi_device *wdev, u8 operation,
> +static int awcc_thermal_information(struct wmi_device *wdev, u8 operation,
>  				    u8 arg, u32 *out_data)
>  {
>  	struct wmax_u32_args in_args = {
> @@ -474,21 +475,21 @@ static int wmax_thermal_information(struct wmi_device *wdev, u8 operation,
>  	};
>  	int ret;
>  
> -	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_INFORMATION,
> +	ret = alienware_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION,
>  				    &in_args, sizeof(in_args), out_data);
>  	if (ret < 0)
>  		return ret;
>  
> -	if (*out_data == WMAX_FAILURE_CODE)
> +	if (*out_data == AWCC_FAILURE_CODE)
>  		return -EBADRQC;
>  
>  	return 0;
>  }
>  
> -static int wmax_thermal_control(struct wmi_device *wdev, u8 profile)
> +static int awcc_thermal_control(struct wmi_device *wdev, u8 profile)
>  {
>  	struct wmax_u32_args in_args = {
> -		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
> +		.operation = AWCC_OP_ACTIVATE_PROFILE,
>  		.arg1 = profile,
>  		.arg2 = 0,
>  		.arg3 = 0,
> @@ -496,18 +497,18 @@ static int wmax_thermal_control(struct wmi_device *wdev, u8 profile)
>  	u32 out_data;
>  	int ret;
>  
> -	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_CONTROL,
> +	ret = alienware_wmi_command(wdev, AWCC_METHOD_THERMAL_CONTROL,
>  				    &in_args, sizeof(in_args), &out_data);
>  	if (ret)
>  		return ret;
>  
> -	if (out_data == WMAX_FAILURE_CODE)
> +	if (out_data == AWCC_FAILURE_CODE)
>  		return -EBADRQC;
>  
>  	return 0;
>  }
>  
> -static int wmax_game_shift_status(struct wmi_device *wdev, u8 operation,
> +static int awcc_game_shift_status(struct wmi_device *wdev, u8 operation,
>  				  u32 *out_data)
>  {
>  	struct wmax_u32_args in_args = {
> @@ -518,46 +519,46 @@ static int wmax_game_shift_status(struct wmi_device *wdev, u8 operation,
>  	};
>  	int ret;
>  
> -	ret = alienware_wmi_command(wdev, WMAX_METHOD_GAME_SHIFT_STATUS,
> +	ret = alienware_wmi_command(wdev, AWCC_METHOD_GAME_SHIFT_STATUS,
>  				    &in_args, sizeof(in_args), out_data);
>  	if (ret < 0)
>  		return ret;
>  
> -	if (*out_data == WMAX_FAILURE_CODE)
> +	if (*out_data == AWCC_FAILURE_CODE)
>  		return -EOPNOTSUPP;
>  
>  	return 0;
>  }
>  
> -static int thermal_profile_get(struct device *dev,
> -			       enum platform_profile_option *profile)
> +static int awcc_platform_profile_get(struct device *dev,
> +				     enum platform_profile_option *profile)
>  {
>  	struct awcc_priv *priv = dev_get_drvdata(dev);
>  	u32 out_data;
>  	int ret;
>  
> -	ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_CURRENT_PROFILE,
> +	ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_CURRENT_PROFILE,
>  				       0, &out_data);
>  
>  	if (ret < 0)
>  		return ret;
>  
> -	if (out_data == WMAX_THERMAL_MODE_GMODE) {
> +	if (out_data == AWCC_THERMAL_MODE_GMODE) {
>  		*profile = PLATFORM_PROFILE_PERFORMANCE;
>  		return 0;
>  	}
>  
> -	if (!is_wmax_thermal_code(out_data))
> +	if (!is_awcc_thermal_mode(out_data))
>  		return -ENODATA;
>  
> -	out_data &= WMAX_THERMAL_MODE_MASK;
> -	*profile = wmax_mode_to_platform_profile[out_data];
> +	out_data &= AWCC_THERMAL_MODE_MASK;
> +	*profile = awcc_mode_to_platform_profile[out_data];
>  
>  	return 0;
>  }
>  
> -static int thermal_profile_set(struct device *dev,
> -			       enum platform_profile_option profile)
> +static int awcc_platform_profile_set(struct device *dev,
> +				     enum platform_profile_option profile)
>  {
>  	struct awcc_priv *priv = dev_get_drvdata(dev);
>  
> @@ -565,8 +566,8 @@ static int thermal_profile_set(struct device *dev,
>  		u32 gmode_status;
>  		int ret;
>  
> -		ret = wmax_game_shift_status(priv->wdev,
> -					     WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
> +		ret = awcc_game_shift_status(priv->wdev,
> +					     AWCC_OP_GET_GAME_SHIFT_STATUS,
>  					     &gmode_status);
>  
>  		if (ret < 0)
> @@ -574,8 +575,8 @@ static int thermal_profile_set(struct device *dev,
>  
>  		if ((profile == PLATFORM_PROFILE_PERFORMANCE && !gmode_status) ||
>  		    (profile != PLATFORM_PROFILE_PERFORMANCE && gmode_status)) {
> -			ret = wmax_game_shift_status(priv->wdev,
> -						     WMAX_OPERATION_TOGGLE_GAME_SHIFT,
> +			ret = awcc_game_shift_status(priv->wdev,
> +						     AWCC_OP_TOGGLE_GAME_SHIFT,
>  						     &gmode_status);
>  
>  			if (ret < 0)
> @@ -583,21 +584,21 @@ static int thermal_profile_set(struct device *dev,
>  		}
>  	}
>  
> -	return wmax_thermal_control(priv->wdev,
> +	return awcc_thermal_control(priv->wdev,
>  				    priv->supported_thermal_profiles[profile]);
>  }
>  
> -static int thermal_profile_probe(void *drvdata, unsigned long *choices)
> +static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
>  {
>  	enum platform_profile_option profile;
>  	struct awcc_priv *priv = drvdata;
> -	enum wmax_thermal_mode mode;
> +	enum awcc_thermal_profile mode;
>  	u8 sys_desc[4];
>  	u32 first_mode;
>  	u32 out_data;
>  	int ret;
>  
> -	ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_SYS_DESCRIPTION,
> +	ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_SYSTEM_DESCRIPTION,
>  				       0, (u32 *) &sys_desc);
>  	if (ret < 0)
>  		return ret;
> @@ -605,7 +606,7 @@ static int thermal_profile_probe(void *drvdata, unsigned long *choices)
>  	first_mode = sys_desc[0] + sys_desc[1];
>  
>  	for (u32 i = 0; i < sys_desc[3]; i++) {
> -		ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_LIST_IDS,
> +		ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_RESOURCE_ID,
>  					       i + first_mode, &out_data);
>  
>  		if (ret == -EIO)
> @@ -614,11 +615,11 @@ static int thermal_profile_probe(void *drvdata, unsigned long *choices)
>  		if (ret == -EBADRQC)
>  			break;
>  
> -		if (!is_wmax_thermal_code(out_data))
> +		if (!is_awcc_thermal_mode(out_data))
>  			continue;
>  
> -		mode = out_data & WMAX_THERMAL_MODE_MASK;
> -		profile = wmax_mode_to_platform_profile[mode];
> +		mode = out_data & AWCC_THERMAL_MODE_MASK;
> +		profile = awcc_mode_to_platform_profile[mode];
>  		priv->supported_thermal_profiles[profile] = out_data;
>  
>  		set_bit(profile, choices);
> @@ -629,7 +630,7 @@ static int thermal_profile_probe(void *drvdata, unsigned long *choices)
>  
>  	if (awcc->gmode) {
>  		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
> -			WMAX_THERMAL_MODE_GMODE;
> +			AWCC_THERMAL_MODE_GMODE;
>  
>  		set_bit(PLATFORM_PROFILE_PERFORMANCE, choices);
>  	}
> @@ -638,9 +639,9 @@ static int thermal_profile_probe(void *drvdata, unsigned long *choices)
>  }
>  
>  static const struct platform_profile_ops awcc_platform_profile_ops = {
> -	.probe = thermal_profile_probe,
> -	.profile_get = thermal_profile_get,
> -	.profile_set = thermal_profile_set,
> +	.probe = awcc_platform_profile_probe,
> +	.profile_get = awcc_platform_profile_get,
> +	.profile_set = awcc_platform_profile_set,
>  };
>  
>  static int awcc_platform_profile_init(struct wmi_device *wdev)
> 
> 

[PATCH v6 02/12] platform/x86: alienware-wmi-wmax: Refactor is_awcc_thermal_mode()

[Kurt Borja]

Refactor is_awcc_thermal_mode() to use FIELD_GET() instead of bitwise
operations. Drop the check for BIT(8) sensor flag and rename it to
is_awcc_thermal_profile_id().

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi-wmax.c | 33 +++++++++++++-------------
 1 file changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
index ed70e12d73d7fe5d89f3364c5367820bf47e3c1e..80aefba5b22d6b4ac18aeb2ca356f8c911150abd 100644
--- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
+++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
@@ -34,7 +34,8 @@
 #define AWCC_FAILURE_CODE			0xFFFFFFFF
 #define AWCC_THERMAL_TABLE_MASK			GENMASK(7, 4)
 #define AWCC_THERMAL_MODE_MASK			GENMASK(3, 0)
-#define AWCC_SENSOR_ID_MASK			BIT(8)
+/* Some IDs have a BIT(8) flag that we ignore */
+#define AWCC_RESOURCE_ID_MASK			GENMASK(7, 0)
 
 static bool force_platform_profile;
 module_param_unsafe(force_platform_profile, bool, 0);
@@ -168,8 +169,8 @@ enum AWCC_GAME_SHIFT_STATUS_OPERATIONS {
 };
 
 enum AWCC_THERMAL_TABLES {
-	AWCC_THERMAL_TABLE_LEGACY		= 0x90,
-	AWCC_THERMAL_TABLE_USTT			= 0xA0,
+	AWCC_THERMAL_TABLE_LEGACY		= 0x9,
+	AWCC_THERMAL_TABLE_USTT			= 0xA,
 };
 
 enum awcc_thermal_profile {
@@ -445,20 +446,18 @@ const struct attribute_group wmax_deepsleep_attribute_group = {
  * Thermal Profile control
  *  - Provides thermal profile control through the Platform Profile API
  */
-static bool is_awcc_thermal_mode(u32 code)
+static bool is_awcc_thermal_profile_id(u8 code)
 {
-	if (code & AWCC_SENSOR_ID_MASK)
+	u8 table = FIELD_GET(AWCC_THERMAL_TABLE_MASK, code);
+	u8 mode = FIELD_GET(AWCC_THERMAL_MODE_MASK, code);
+
+	if (mode >= AWCC_PROFILE_LAST)
 		return false;
 
-	if ((code & AWCC_THERMAL_MODE_MASK) >= AWCC_PROFILE_LAST)
-		return false;
-
-	if ((code & AWCC_THERMAL_TABLE_MASK) == AWCC_THERMAL_TABLE_LEGACY &&
-	    (code & AWCC_THERMAL_MODE_MASK) >= AWCC_PROFILE_LEGACY_QUIET)
+	if (table == AWCC_THERMAL_TABLE_LEGACY && mode >= AWCC_PROFILE_LEGACY_QUIET)
 		return true;
 
-	if ((code & AWCC_THERMAL_TABLE_MASK) == AWCC_THERMAL_TABLE_USTT &&
-	    (code & AWCC_THERMAL_MODE_MASK) <= AWCC_PROFILE_USTT_LOW_POWER)
+	if (table == AWCC_THERMAL_TABLE_USTT && mode <= AWCC_PROFILE_USTT_LOW_POWER)
 		return true;
 
 	return false;
@@ -548,7 +547,7 @@ static int awcc_platform_profile_get(struct device *dev,
 		return 0;
 	}
 
-	if (!is_awcc_thermal_mode(out_data))
+	if (!is_awcc_thermal_profile_id(out_data))
 		return -ENODATA;
 
 	out_data &= AWCC_THERMAL_MODE_MASK;
@@ -597,6 +596,7 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
 	u32 first_mode;
 	u32 out_data;
 	int ret;
+	u8 id;
 
 	ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_SYSTEM_DESCRIPTION,
 				       0, (u32 *) &sys_desc);
@@ -615,12 +615,13 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
 		if (ret == -EBADRQC)
 			break;
 
-		if (!is_awcc_thermal_mode(out_data))
+		id = FIELD_GET(AWCC_RESOURCE_ID_MASK, out_data);
+		if (!is_awcc_thermal_profile_id(id))
 			continue;
 
-		mode = out_data & AWCC_THERMAL_MODE_MASK;
+		mode = FIELD_GET(AWCC_THERMAL_MODE_MASK, id);
 		profile = awcc_mode_to_platform_profile[mode];
-		priv->supported_thermal_profiles[profile] = out_data;
+		priv->supported_thermal_profiles[profile] = id;
 
 		set_bit(profile, choices);
 	}

-- 
2.48.1

Re: [PATCH v6 02/12] platform/x86: alienware-wmi-wmax: Refactor is_awcc_thermal_mode()

[Ilpo Järvinen]

[-- Attachment #1: Type: text/plain, Size: 4182 bytes --]

On Thu, 13 Mar 2025, Kurt Borja wrote:

> Refactor is_awcc_thermal_mode() to use FIELD_GET() instead of bitwise
> operations. Drop the check for BIT(8) sensor flag and rename it to
> is_awcc_thermal_profile_id().
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
> ---
>  drivers/platform/x86/dell/alienware-wmi-wmax.c | 33 +++++++++++++-------------
>  1 file changed, 17 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> index ed70e12d73d7fe5d89f3364c5367820bf47e3c1e..80aefba5b22d6b4ac18aeb2ca356f8c911150abd 100644
> --- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
> +++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> @@ -34,7 +34,8 @@
>  #define AWCC_FAILURE_CODE			0xFFFFFFFF
>  #define AWCC_THERMAL_TABLE_MASK			GENMASK(7, 4)
>  #define AWCC_THERMAL_MODE_MASK			GENMASK(3, 0)
> -#define AWCC_SENSOR_ID_MASK			BIT(8)

I'd prefer leaving this in place even if it now becomes unused, or 
actually I suggest you move it before the GENMASKs to keep the values in 
order, and leave an empty row between failure code and these id related 
masks.

> +/* Some IDs have a BIT(8) flag that we ignore */
> +#define AWCC_RESOURCE_ID_MASK			GENMASK(7, 0)

(AWCC_THERMAL_TABLE_MASK | AWCC_THERMAL_MODE_MASK) ?
  
>  static bool force_platform_profile;
>  module_param_unsafe(force_platform_profile, bool, 0);
> @@ -168,8 +169,8 @@ enum AWCC_GAME_SHIFT_STATUS_OPERATIONS {
>  };
>  
>  enum AWCC_THERMAL_TABLES {
> -	AWCC_THERMAL_TABLE_LEGACY		= 0x90,
> -	AWCC_THERMAL_TABLE_USTT			= 0xA0,
> +	AWCC_THERMAL_TABLE_LEGACY		= 0x9,
> +	AWCC_THERMAL_TABLE_USTT			= 0xA,
>  };
>  
>  enum awcc_thermal_profile {
> @@ -445,20 +446,18 @@ const struct attribute_group wmax_deepsleep_attribute_group = {
>   * Thermal Profile control
>   *  - Provides thermal profile control through the Platform Profile API
>   */
> -static bool is_awcc_thermal_mode(u32 code)
> +static bool is_awcc_thermal_profile_id(u8 code)
>  {
> -	if (code & AWCC_SENSOR_ID_MASK)
> +	u8 table = FIELD_GET(AWCC_THERMAL_TABLE_MASK, code);
> +	u8 mode = FIELD_GET(AWCC_THERMAL_MODE_MASK, code);
> +
> +	if (mode >= AWCC_PROFILE_LAST)
>  		return false;
>  
> -	if ((code & AWCC_THERMAL_MODE_MASK) >= AWCC_PROFILE_LAST)
> -		return false;
> -
> -	if ((code & AWCC_THERMAL_TABLE_MASK) == AWCC_THERMAL_TABLE_LEGACY &&
> -	    (code & AWCC_THERMAL_MODE_MASK) >= AWCC_PROFILE_LEGACY_QUIET)
> +	if (table == AWCC_THERMAL_TABLE_LEGACY && mode >= AWCC_PROFILE_LEGACY_QUIET)
>  		return true;
>  
> -	if ((code & AWCC_THERMAL_TABLE_MASK) == AWCC_THERMAL_TABLE_USTT &&
> -	    (code & AWCC_THERMAL_MODE_MASK) <= AWCC_PROFILE_USTT_LOW_POWER)
> +	if (table == AWCC_THERMAL_TABLE_USTT && mode <= AWCC_PROFILE_USTT_LOW_POWER)
>  		return true;
>  
>  	return false;
> @@ -548,7 +547,7 @@ static int awcc_platform_profile_get(struct device *dev,
>  		return 0;
>  	}
>  
> -	if (!is_awcc_thermal_mode(out_data))
> +	if (!is_awcc_thermal_profile_id(out_data))
>  		return -ENODATA;
>  
>  	out_data &= AWCC_THERMAL_MODE_MASK;
> @@ -597,6 +596,7 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
>  	u32 first_mode;
>  	u32 out_data;
>  	int ret;
> +	u8 id;
>  
>  	ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_SYSTEM_DESCRIPTION,
>  				       0, (u32 *) &sys_desc);
> @@ -615,12 +615,13 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
>  		if (ret == -EBADRQC)
>  			break;
>  
> -		if (!is_awcc_thermal_mode(out_data))
> +		id = FIELD_GET(AWCC_RESOURCE_ID_MASK, out_data);
> +		if (!is_awcc_thermal_profile_id(id))
>  			continue;
>  
> -		mode = out_data & AWCC_THERMAL_MODE_MASK;
> +		mode = FIELD_GET(AWCC_THERMAL_MODE_MASK, id);
>  		profile = awcc_mode_to_platform_profile[mode];
> -		priv->supported_thermal_profiles[profile] = out_data;
> +		priv->supported_thermal_profiles[profile] = id;
>  
>  		set_bit(profile, choices);
>  	}

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

-- 
 i.

Re: [PATCH v6 02/12] platform/x86: alienware-wmi-wmax: Refactor is_awcc_thermal_mode()

[Kurt Borja]

On Fri Mar 28, 2025 at 11:17 AM -03, Ilpo Järvinen wrote:
> On Thu, 13 Mar 2025, Kurt Borja wrote:
>
>> Refactor is_awcc_thermal_mode() to use FIELD_GET() instead of bitwise
>> operations. Drop the check for BIT(8) sensor flag and rename it to
>> is_awcc_thermal_profile_id().
>> 
>> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
>> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
>> ---
>>  drivers/platform/x86/dell/alienware-wmi-wmax.c | 33 +++++++++++++-------------
>>  1 file changed, 17 insertions(+), 16 deletions(-)
>> 
>> diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
>> index ed70e12d73d7fe5d89f3364c5367820bf47e3c1e..80aefba5b22d6b4ac18aeb2ca356f8c911150abd 100644
>> --- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
>> +++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
>> @@ -34,7 +34,8 @@
>>  #define AWCC_FAILURE_CODE			0xFFFFFFFF
>>  #define AWCC_THERMAL_TABLE_MASK			GENMASK(7, 4)
>>  #define AWCC_THERMAL_MODE_MASK			GENMASK(3, 0)
>> -#define AWCC_SENSOR_ID_MASK			BIT(8)
>
> I'd prefer leaving this in place even if it now becomes unused, or 
> actually I suggest you move it before the GENMASKs to keep the values in 
> order, and leave an empty row between failure code and these id related 
> masks.

Sure, I'll move it to the top.

>
>> +/* Some IDs have a BIT(8) flag that we ignore */
>> +#define AWCC_RESOURCE_ID_MASK			GENMASK(7, 0)
>
> (AWCC_THERMAL_TABLE_MASK | AWCC_THERMAL_MODE_MASK) ?

I prefer not to go for this because AWCC_RESOURCE_ID_MASK will be used
for all IDs in the following patches, not just thermal ones.

I'm doing this because I found that Alienware Aurora desktops also used
the BIT(8) flag for thermal profile IDs, not just sensors.

>   
>>  static bool force_platform_profile;
>>  module_param_unsafe(force_platform_profile, bool, 0);
>> @@ -168,8 +169,8 @@ enum AWCC_GAME_SHIFT_STATUS_OPERATIONS {
>>  };
>>  
>>  enum AWCC_THERMAL_TABLES {
>> -	AWCC_THERMAL_TABLE_LEGACY		= 0x90,
>> -	AWCC_THERMAL_TABLE_USTT			= 0xA0,
>> +	AWCC_THERMAL_TABLE_LEGACY		= 0x9,
>> +	AWCC_THERMAL_TABLE_USTT			= 0xA,
>>  };
>>  
>>  enum awcc_thermal_profile {
>> @@ -445,20 +446,18 @@ const struct attribute_group wmax_deepsleep_attribute_group = {
>>   * Thermal Profile control
>>   *  - Provides thermal profile control through the Platform Profile API
>>   */
>> -static bool is_awcc_thermal_mode(u32 code)
>> +static bool is_awcc_thermal_profile_id(u8 code)
>>  {
>> -	if (code & AWCC_SENSOR_ID_MASK)
>> +	u8 table = FIELD_GET(AWCC_THERMAL_TABLE_MASK, code);
>> +	u8 mode = FIELD_GET(AWCC_THERMAL_MODE_MASK, code);
>> +
>> +	if (mode >= AWCC_PROFILE_LAST)
>>  		return false;
>>  
>> -	if ((code & AWCC_THERMAL_MODE_MASK) >= AWCC_PROFILE_LAST)
>> -		return false;
>> -
>> -	if ((code & AWCC_THERMAL_TABLE_MASK) == AWCC_THERMAL_TABLE_LEGACY &&
>> -	    (code & AWCC_THERMAL_MODE_MASK) >= AWCC_PROFILE_LEGACY_QUIET)
>> +	if (table == AWCC_THERMAL_TABLE_LEGACY && mode >= AWCC_PROFILE_LEGACY_QUIET)
>>  		return true;
>>  
>> -	if ((code & AWCC_THERMAL_TABLE_MASK) == AWCC_THERMAL_TABLE_USTT &&
>> -	    (code & AWCC_THERMAL_MODE_MASK) <= AWCC_PROFILE_USTT_LOW_POWER)
>> +	if (table == AWCC_THERMAL_TABLE_USTT && mode <= AWCC_PROFILE_USTT_LOW_POWER)
>>  		return true;
>>  
>>  	return false;
>> @@ -548,7 +547,7 @@ static int awcc_platform_profile_get(struct device *dev,
>>  		return 0;
>>  	}
>>  
>> -	if (!is_awcc_thermal_mode(out_data))
>> +	if (!is_awcc_thermal_profile_id(out_data))
>>  		return -ENODATA;
>>  
>>  	out_data &= AWCC_THERMAL_MODE_MASK;
>> @@ -597,6 +596,7 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
>>  	u32 first_mode;
>>  	u32 out_data;
>>  	int ret;
>> +	u8 id;
>>  
>>  	ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_SYSTEM_DESCRIPTION,
>>  				       0, (u32 *) &sys_desc);
>> @@ -615,12 +615,13 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
>>  		if (ret == -EBADRQC)
>>  			break;
>>  
>> -		if (!is_awcc_thermal_mode(out_data))
>> +		id = FIELD_GET(AWCC_RESOURCE_ID_MASK, out_data);
>> +		if (!is_awcc_thermal_profile_id(id))
>>  			continue;
>>  
>> -		mode = out_data & AWCC_THERMAL_MODE_MASK;
>> +		mode = FIELD_GET(AWCC_THERMAL_MODE_MASK, id);
>>  		profile = awcc_mode_to_platform_profile[mode];
>> -		priv->supported_thermal_profiles[profile] = out_data;
>> +		priv->supported_thermal_profiles[profile] = id;
>>  
>>  		set_bit(profile, choices);
>>  	}
>
> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Thanks!

-- 
 ~ Kurt

[PATCH v6 03/12] platform/x86: alienware-wmi-wmax: Improve internal AWCC API

[Kurt Borja]

Inline all AWCC WMI helper methods and directly return the newly
introduced __awcc_wmi_command() helper to simplify implementation.

Drop awcc_thermal_control() in favor of awcc_op_activate_profile().

Add awcc_op_get_resource_id(), awcc_op_get_current_profile() and a new
failure code.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi-wmax.c | 150 +++++++++++++++----------
 1 file changed, 91 insertions(+), 59 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
index 80aefba5b22d6b4ac18aeb2ca356f8c911150abd..b9dbfdc8096c571722b3c7ac3e73989e235e2eb9 100644
--- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
+++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
@@ -32,6 +32,7 @@
 #define AWCC_THERMAL_MODE_GMODE			0xAB
 
 #define AWCC_FAILURE_CODE			0xFFFFFFFF
+#define AWCC_FAILURE_CODE_2			0xFFFFFFFE
 #define AWCC_THERMAL_TABLE_MASK			GENMASK(7, 4)
 #define AWCC_THERMAL_MODE_MASK			GENMASK(3, 0)
 /* Some IDs have a BIT(8) flag that we ignore */
@@ -443,8 +444,7 @@ const struct attribute_group wmax_deepsleep_attribute_group = {
 };
 
 /*
- * Thermal Profile control
- *  - Provides thermal profile control through the Platform Profile API
+ * AWCC Helpers
  */
 static bool is_awcc_thermal_profile_id(u8 code)
 {
@@ -463,72 +463,107 @@ static bool is_awcc_thermal_profile_id(u8 code)
 	return false;
 }
 
-static int awcc_thermal_information(struct wmi_device *wdev, u8 operation,
-				    u8 arg, u32 *out_data)
+static int __awcc_wmi_command(struct wmi_device *wdev, u32 method_id,
+			      struct wmax_u32_args *args, u32 *out)
 {
-	struct wmax_u32_args in_args = {
+	int ret;
+
+	ret = alienware_wmi_command(wdev, method_id, args, sizeof(*args), out);
+	if (ret)
+		return ret;
+
+	if (*out == AWCC_FAILURE_CODE || *out == AWCC_FAILURE_CODE_2)
+		return -EBADRQC;
+
+	return 0;
+}
+
+static inline int awcc_thermal_information(struct wmi_device *wdev, u8 operation,
+					   u8 arg, u32 *out)
+{
+	struct wmax_u32_args args = {
 		.operation = operation,
 		.arg1 = arg,
 		.arg2 = 0,
 		.arg3 = 0,
 	};
-	int ret;
 
-	ret = alienware_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION,
-				    &in_args, sizeof(in_args), out_data);
-	if (ret < 0)
-		return ret;
-
-	if (*out_data == AWCC_FAILURE_CODE)
-		return -EBADRQC;
-
-	return 0;
+	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
 }
 
-static int awcc_thermal_control(struct wmi_device *wdev, u8 profile)
+static inline int awcc_game_shift_status(struct wmi_device *wdev, u8 operation,
+					 u32 *out)
 {
-	struct wmax_u32_args in_args = {
-		.operation = AWCC_OP_ACTIVATE_PROFILE,
-		.arg1 = profile,
-		.arg2 = 0,
-		.arg3 = 0,
-	};
-	u32 out_data;
-	int ret;
-
-	ret = alienware_wmi_command(wdev, AWCC_METHOD_THERMAL_CONTROL,
-				    &in_args, sizeof(in_args), &out_data);
-	if (ret)
-		return ret;
-
-	if (out_data == AWCC_FAILURE_CODE)
-		return -EBADRQC;
-
-	return 0;
-}
-
-static int awcc_game_shift_status(struct wmi_device *wdev, u8 operation,
-				  u32 *out_data)
-{
-	struct wmax_u32_args in_args = {
+	struct wmax_u32_args args = {
 		.operation = operation,
 		.arg1 = 0,
 		.arg2 = 0,
 		.arg3 = 0,
 	};
-	int ret;
 
-	ret = alienware_wmi_command(wdev, AWCC_METHOD_GAME_SHIFT_STATUS,
-				    &in_args, sizeof(in_args), out_data);
-	if (ret < 0)
-		return ret;
-
-	if (*out_data == AWCC_FAILURE_CODE)
-		return -EOPNOTSUPP;
-
-	return 0;
+	return __awcc_wmi_command(wdev, AWCC_METHOD_GAME_SHIFT_STATUS, &args, out);
 }
 
+/**
+ * awcc_op_get_resource_id - Get the resource ID at a given index
+ * @wdev: AWCC WMI device
+ * @index: Index
+ * @out: Value returned by the WMI call
+ *
+ * Get the resource ID at a given index. Resource IDs are listed in the
+ * following order:
+ *
+ *	- Fan IDs
+ *	- Sensor IDs
+ *	- Unknown IDs
+ *	- Thermal Profile IDs
+ *
+ * The total number of IDs of a given type can be obtained with
+ * AWCC_OP_GET_SYSTEM_DESCRIPTION.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static inline int awcc_op_get_resource_id(struct wmi_device *wdev, u8 index, u32 *out)
+{
+	struct wmax_u32_args args = {
+		.operation = AWCC_OP_GET_RESOURCE_ID,
+		.arg1 = index,
+		.arg2 = 0,
+		.arg3 = 0,
+	};
+
+	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
+}
+
+static inline int awcc_op_get_current_profile(struct wmi_device *wdev, u32 *out)
+{
+	struct wmax_u32_args args = {
+		.operation = AWCC_OP_GET_CURRENT_PROFILE,
+		.arg1 = 0,
+		.arg2 = 0,
+		.arg3 = 0,
+	};
+
+	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
+}
+
+static inline int awcc_op_activate_profile(struct wmi_device *wdev, u8 profile)
+{
+	struct wmax_u32_args args = {
+		.operation = AWCC_OP_ACTIVATE_PROFILE,
+		.arg1 = profile,
+		.arg2 = 0,
+		.arg3 = 0,
+	};
+	u32 out;
+
+	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_CONTROL, &args, &out);
+}
+
+/*
+ * Thermal Profile control
+ *  - Provides thermal profile control through the Platform Profile API
+ */
 static int awcc_platform_profile_get(struct device *dev,
 				     enum platform_profile_option *profile)
 {
@@ -536,10 +571,8 @@ static int awcc_platform_profile_get(struct device *dev,
 	u32 out_data;
 	int ret;
 
-	ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_CURRENT_PROFILE,
-				       0, &out_data);
-
-	if (ret < 0)
+	ret = awcc_op_get_current_profile(priv->wdev, &out_data);
+	if (ret)
 		return ret;
 
 	if (out_data == AWCC_THERMAL_MODE_GMODE) {
@@ -550,7 +583,7 @@ static int awcc_platform_profile_get(struct device *dev,
 	if (!is_awcc_thermal_profile_id(out_data))
 		return -ENODATA;
 
-	out_data &= AWCC_THERMAL_MODE_MASK;
+	out_data = FIELD_GET(AWCC_THERMAL_MODE_MASK, out_data);
 	*profile = awcc_mode_to_platform_profile[out_data];
 
 	return 0;
@@ -583,8 +616,8 @@ static int awcc_platform_profile_set(struct device *dev,
 		}
 	}
 
-	return awcc_thermal_control(priv->wdev,
-				    priv->supported_thermal_profiles[profile]);
+	return awcc_op_activate_profile(priv->wdev,
+					priv->supported_thermal_profiles[profile]);
 }
 
 static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
@@ -606,8 +639,7 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
 	first_mode = sys_desc[0] + sys_desc[1];
 
 	for (u32 i = 0; i < sys_desc[3]; i++) {
-		ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_RESOURCE_ID,
-					       i + first_mode, &out_data);
+		ret = awcc_op_get_resource_id(priv->wdev, i + first_mode, &out_data);
 
 		if (ret == -EIO)
 			return ret;

-- 
2.48.1

Re: [PATCH v6 03/12] platform/x86: alienware-wmi-wmax: Improve internal AWCC API

[Ilpo Järvinen]

On Thu, 13 Mar 2025, Kurt Borja wrote:

> Inline all AWCC WMI helper methods and directly return the newly
> introduced __awcc_wmi_command() helper to simplify implementation.
> 
> Drop awcc_thermal_control() in favor of awcc_op_activate_profile().
> 
> Add awcc_op_get_resource_id(), awcc_op_get_current_profile() and a new
> failure code.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
> ---
>  drivers/platform/x86/dell/alienware-wmi-wmax.c | 150 +++++++++++++++----------
>  1 file changed, 91 insertions(+), 59 deletions(-)
> 
> diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> index 80aefba5b22d6b4ac18aeb2ca356f8c911150abd..b9dbfdc8096c571722b3c7ac3e73989e235e2eb9 100644
> --- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
> +++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> @@ -32,6 +32,7 @@
>  #define AWCC_THERMAL_MODE_GMODE			0xAB
>  
>  #define AWCC_FAILURE_CODE			0xFFFFFFFF
> +#define AWCC_FAILURE_CODE_2			0xFFFFFFFE
>  #define AWCC_THERMAL_TABLE_MASK			GENMASK(7, 4)
>  #define AWCC_THERMAL_MODE_MASK			GENMASK(3, 0)
>  /* Some IDs have a BIT(8) flag that we ignore */
> @@ -443,8 +444,7 @@ const struct attribute_group wmax_deepsleep_attribute_group = {
>  };
>  
>  /*
> - * Thermal Profile control
> - *  - Provides thermal profile control through the Platform Profile API
> + * AWCC Helpers
>   */
>  static bool is_awcc_thermal_profile_id(u8 code)
>  {
> @@ -463,72 +463,107 @@ static bool is_awcc_thermal_profile_id(u8 code)
>  	return false;
>  }
>  
> -static int awcc_thermal_information(struct wmi_device *wdev, u8 operation,
> -				    u8 arg, u32 *out_data)
> +static int __awcc_wmi_command(struct wmi_device *wdev, u32 method_id,
> +			      struct wmax_u32_args *args, u32 *out)

Why did you put __ into the name?

Some people oppose __ prefix altogether, I don't entirely agree with their 
stance but I don't really understand what the underscores here signify.

Normally I see __ being used in three main cases:
- non-__ variant does some locking around the call too the __ func (though 
  many funcs use _locked postfix these days).
- func is "dangerous" and caller has to really know what he/she is
  doing / be careful for some reason.
- non-__ variant exists and somebody cannot come up better name for the
  internally called function (not very good use case, IMHO)

I don't see any of those apply here, this looks just an ordinary wrapper 
function, thus the question.

>  {
> -	struct wmax_u32_args in_args = {
> +	int ret;
> +
> +	ret = alienware_wmi_command(wdev, method_id, args, sizeof(*args), out);
> +	if (ret)
> +		return ret;
> +
> +	if (*out == AWCC_FAILURE_CODE || *out == AWCC_FAILURE_CODE_2)
> +		return -EBADRQC;
> +
> +	return 0;
> +}
> +
> +static inline int awcc_thermal_information(struct wmi_device *wdev, u8 operation,
> +					   u8 arg, u32 *out)
> +{
> +	struct wmax_u32_args args = {
>  		.operation = operation,
>  		.arg1 = arg,
>  		.arg2 = 0,
>  		.arg3 = 0,
>  	};
> -	int ret;
>  
> -	ret = alienware_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION,
> -				    &in_args, sizeof(in_args), out_data);
> -	if (ret < 0)
> -		return ret;
> -
> -	if (*out_data == AWCC_FAILURE_CODE)
> -		return -EBADRQC;
> -
> -	return 0;
> +	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
>  }
>  
> -static int awcc_thermal_control(struct wmi_device *wdev, u8 profile)
> +static inline int awcc_game_shift_status(struct wmi_device *wdev, u8 operation,

As a general rule, don't add inline to .c files, we leave figuring 
inlining out to the compiler.

> +					 u32 *out)
>  {
> -	struct wmax_u32_args in_args = {
> -		.operation = AWCC_OP_ACTIVATE_PROFILE,
> -		.arg1 = profile,
> -		.arg2 = 0,
> -		.arg3 = 0,
> -	};
> -	u32 out_data;
> -	int ret;
> -
> -	ret = alienware_wmi_command(wdev, AWCC_METHOD_THERMAL_CONTROL,
> -				    &in_args, sizeof(in_args), &out_data);
> -	if (ret)
> -		return ret;
> -
> -	if (out_data == AWCC_FAILURE_CODE)
> -		return -EBADRQC;
> -
> -	return 0;
> -}
> -
> -static int awcc_game_shift_status(struct wmi_device *wdev, u8 operation,
> -				  u32 *out_data)
> -{
> -	struct wmax_u32_args in_args = {
> +	struct wmax_u32_args args = {
>  		.operation = operation,
>  		.arg1 = 0,
>  		.arg2 = 0,
>  		.arg3 = 0,
>  	};
> -	int ret;
>  
> -	ret = alienware_wmi_command(wdev, AWCC_METHOD_GAME_SHIFT_STATUS,
> -				    &in_args, sizeof(in_args), out_data);
> -	if (ret < 0)
> -		return ret;
> -
> -	if (*out_data == AWCC_FAILURE_CODE)
> -		return -EOPNOTSUPP;
> -
> -	return 0;
> +	return __awcc_wmi_command(wdev, AWCC_METHOD_GAME_SHIFT_STATUS, &args, out);
>  }
>  
> +/**
> + * awcc_op_get_resource_id - Get the resource ID at a given index
> + * @wdev: AWCC WMI device
> + * @index: Index
> + * @out: Value returned by the WMI call
> + *
> + * Get the resource ID at a given index. Resource IDs are listed in the

Use @index to refer to the argument.

> + * following order:
> + *
> + *	- Fan IDs
> + *	- Sensor IDs
> + *	- Unknown IDs
> + *	- Thermal Profile IDs
> + *
> + * The total number of IDs of a given type can be obtained with
> + * AWCC_OP_GET_SYSTEM_DESCRIPTION.
> + *
> + * Return: 0 on success, -errno on failure
> + */
> +static inline int awcc_op_get_resource_id(struct wmi_device *wdev, u8 index, u32 *out)
> +{
> +	struct wmax_u32_args args = {
> +		.operation = AWCC_OP_GET_RESOURCE_ID,
> +		.arg1 = index,
> +		.arg2 = 0,
> +		.arg3 = 0,
> +	};
> +
> +	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
> +}
> +
> +static inline int awcc_op_get_current_profile(struct wmi_device *wdev, u32 *out)
> +{
> +	struct wmax_u32_args args = {
> +		.operation = AWCC_OP_GET_CURRENT_PROFILE,
> +		.arg1 = 0,
> +		.arg2 = 0,
> +		.arg3 = 0,
> +	};
> +
> +	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
> +}
> +
> +static inline int awcc_op_activate_profile(struct wmi_device *wdev, u8 profile)
> +{
> +	struct wmax_u32_args args = {
> +		.operation = AWCC_OP_ACTIVATE_PROFILE,
> +		.arg1 = profile,
> +		.arg2 = 0,
> +		.arg3 = 0,
> +	};
> +	u32 out;
> +
> +	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_CONTROL, &args, &out);
> +}
> +
> +/*
> + * Thermal Profile control
> + *  - Provides thermal profile control through the Platform Profile API
> + */
>  static int awcc_platform_profile_get(struct device *dev,
>  				     enum platform_profile_option *profile)
>  {
> @@ -536,10 +571,8 @@ static int awcc_platform_profile_get(struct device *dev,
>  	u32 out_data;
>  	int ret;
>  
> -	ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_CURRENT_PROFILE,
> -				       0, &out_data);
> -
> -	if (ret < 0)
> +	ret = awcc_op_get_current_profile(priv->wdev, &out_data);
> +	if (ret)
>  		return ret;
>  
>  	if (out_data == AWCC_THERMAL_MODE_GMODE) {
> @@ -550,7 +583,7 @@ static int awcc_platform_profile_get(struct device *dev,
>  	if (!is_awcc_thermal_profile_id(out_data))
>  		return -ENODATA;
>  
> -	out_data &= AWCC_THERMAL_MODE_MASK;
> +	out_data = FIELD_GET(AWCC_THERMAL_MODE_MASK, out_data);

Should this be part of the earlier patch??

>  	*profile = awcc_mode_to_platform_profile[out_data];
>  
>  	return 0;
> @@ -583,8 +616,8 @@ static int awcc_platform_profile_set(struct device *dev,
>  		}
>  	}
>  
> -	return awcc_thermal_control(priv->wdev,
> -				    priv->supported_thermal_profiles[profile]);
> +	return awcc_op_activate_profile(priv->wdev,
> +					priv->supported_thermal_profiles[profile]);
>  }
>  
>  static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
> @@ -606,8 +639,7 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
>  	first_mode = sys_desc[0] + sys_desc[1];
>  
>  	for (u32 i = 0; i < sys_desc[3]; i++) {
> -		ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_RESOURCE_ID,
> -					       i + first_mode, &out_data);
> +		ret = awcc_op_get_resource_id(priv->wdev, i + first_mode, &out_data);
>  
>  		if (ret == -EIO)
>  			return ret;
> 
> 

-- 
 i.

Re: [PATCH v6 03/12] platform/x86: alienware-wmi-wmax: Improve internal AWCC API

[Kurt Borja]

On Fri Mar 28, 2025 at 11:51 AM -03, Ilpo Järvinen wrote:
> On Thu, 13 Mar 2025, Kurt Borja wrote:
>
>> Inline all AWCC WMI helper methods and directly return the newly
>> introduced __awcc_wmi_command() helper to simplify implementation.
>> 
>> Drop awcc_thermal_control() in favor of awcc_op_activate_profile().
>> 
>> Add awcc_op_get_resource_id(), awcc_op_get_current_profile() and a new
>> failure code.
>> 
>> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
>> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
>> ---
>>  drivers/platform/x86/dell/alienware-wmi-wmax.c | 150 +++++++++++++++----------
>>  1 file changed, 91 insertions(+), 59 deletions(-)
>> 
>> diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
>> index 80aefba5b22d6b4ac18aeb2ca356f8c911150abd..b9dbfdc8096c571722b3c7ac3e73989e235e2eb9 100644
>> --- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
>> +++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
>> @@ -32,6 +32,7 @@
>>  #define AWCC_THERMAL_MODE_GMODE			0xAB
>>  
>>  #define AWCC_FAILURE_CODE			0xFFFFFFFF
>> +#define AWCC_FAILURE_CODE_2			0xFFFFFFFE
>>  #define AWCC_THERMAL_TABLE_MASK			GENMASK(7, 4)
>>  #define AWCC_THERMAL_MODE_MASK			GENMASK(3, 0)
>>  /* Some IDs have a BIT(8) flag that we ignore */
>> @@ -443,8 +444,7 @@ const struct attribute_group wmax_deepsleep_attribute_group = {
>>  };
>>  
>>  /*
>> - * Thermal Profile control
>> - *  - Provides thermal profile control through the Platform Profile API
>> + * AWCC Helpers
>>   */
>>  static bool is_awcc_thermal_profile_id(u8 code)
>>  {
>> @@ -463,72 +463,107 @@ static bool is_awcc_thermal_profile_id(u8 code)
>>  	return false;
>>  }
>>  
>> -static int awcc_thermal_information(struct wmi_device *wdev, u8 operation,
>> -				    u8 arg, u32 *out_data)
>> +static int __awcc_wmi_command(struct wmi_device *wdev, u32 method_id,
>> +			      struct wmax_u32_args *args, u32 *out)
>
> Why did you put __ into the name?
>
> Some people oppose __ prefix altogether, I don't entirely agree with their 
> stance but I don't really understand what the underscores here signify.
>
> Normally I see __ being used in three main cases:
> - non-__ variant does some locking around the call too the __ func (though 
>   many funcs use _locked postfix these days).
> - func is "dangerous" and caller has to really know what he/she is
>   doing / be careful for some reason.
> - non-__ variant exists and somebody cannot come up better name for the
>   internally called function (not very good use case, IMHO)

Oh - I didn't know. Andy also mentioned this prefix is used for
non-atomic versions of some functions like __set_bit().

>
> I don't see any of those apply here, this looks just an ordinary wrapper 
> function, thus the question.

I did it to indicate it's a "private" method, so it's not used directly.
But ofc that's not the convention here, so I'll drop it.

>
>>  {
>> -	struct wmax_u32_args in_args = {
>> +	int ret;
>> +
>> +	ret = alienware_wmi_command(wdev, method_id, args, sizeof(*args), out);
>> +	if (ret)
>> +		return ret;
>> +
>> +	if (*out == AWCC_FAILURE_CODE || *out == AWCC_FAILURE_CODE_2)
>> +		return -EBADRQC;
>> +
>> +	return 0;
>> +}
>> +
>> +static inline int awcc_thermal_information(struct wmi_device *wdev, u8 operation,
>> +					   u8 arg, u32 *out)
>> +{
>> +	struct wmax_u32_args args = {
>>  		.operation = operation,
>>  		.arg1 = arg,
>>  		.arg2 = 0,
>>  		.arg3 = 0,
>>  	};
>> -	int ret;
>>  
>> -	ret = alienware_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION,
>> -				    &in_args, sizeof(in_args), out_data);
>> -	if (ret < 0)
>> -		return ret;
>> -
>> -	if (*out_data == AWCC_FAILURE_CODE)
>> -		return -EBADRQC;
>> -
>> -	return 0;
>> +	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
>>  }
>>  
>> -static int awcc_thermal_control(struct wmi_device *wdev, u8 profile)
>> +static inline int awcc_game_shift_status(struct wmi_device *wdev, u8 operation,
>
> As a general rule, don't add inline to .c files, we leave figuring 
> inlining out to the compiler.

Good to know, thanks!

>
>> +					 u32 *out)
>>  {
>> -	struct wmax_u32_args in_args = {
>> -		.operation = AWCC_OP_ACTIVATE_PROFILE,
>> -		.arg1 = profile,
>> -		.arg2 = 0,
>> -		.arg3 = 0,
>> -	};
>> -	u32 out_data;
>> -	int ret;
>> -
>> -	ret = alienware_wmi_command(wdev, AWCC_METHOD_THERMAL_CONTROL,
>> -				    &in_args, sizeof(in_args), &out_data);
>> -	if (ret)
>> -		return ret;
>> -
>> -	if (out_data == AWCC_FAILURE_CODE)
>> -		return -EBADRQC;
>> -
>> -	return 0;
>> -}
>> -
>> -static int awcc_game_shift_status(struct wmi_device *wdev, u8 operation,
>> -				  u32 *out_data)
>> -{
>> -	struct wmax_u32_args in_args = {
>> +	struct wmax_u32_args args = {
>>  		.operation = operation,
>>  		.arg1 = 0,
>>  		.arg2 = 0,
>>  		.arg3 = 0,
>>  	};
>> -	int ret;
>>  
>> -	ret = alienware_wmi_command(wdev, AWCC_METHOD_GAME_SHIFT_STATUS,
>> -				    &in_args, sizeof(in_args), out_data);
>> -	if (ret < 0)
>> -		return ret;
>> -
>> -	if (*out_data == AWCC_FAILURE_CODE)
>> -		return -EOPNOTSUPP;
>> -
>> -	return 0;
>> +	return __awcc_wmi_command(wdev, AWCC_METHOD_GAME_SHIFT_STATUS, &args, out);
>>  }
>>  
>> +/**
>> + * awcc_op_get_resource_id - Get the resource ID at a given index
>> + * @wdev: AWCC WMI device
>> + * @index: Index
>> + * @out: Value returned by the WMI call
>> + *
>> + * Get the resource ID at a given index. Resource IDs are listed in the
>
> Use @index to refer to the argument.

Ack

>
>> + * following order:
>> + *
>> + *	- Fan IDs
>> + *	- Sensor IDs
>> + *	- Unknown IDs
>> + *	- Thermal Profile IDs
>> + *
>> + * The total number of IDs of a given type can be obtained with
>> + * AWCC_OP_GET_SYSTEM_DESCRIPTION.
>> + *
>> + * Return: 0 on success, -errno on failure
>> + */
>> +static inline int awcc_op_get_resource_id(struct wmi_device *wdev, u8 index, u32 *out)
>> +{
>> +	struct wmax_u32_args args = {
>> +		.operation = AWCC_OP_GET_RESOURCE_ID,
>> +		.arg1 = index,
>> +		.arg2 = 0,
>> +		.arg3 = 0,
>> +	};
>> +
>> +	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
>> +}
>> +
>> +static inline int awcc_op_get_current_profile(struct wmi_device *wdev, u32 *out)
>> +{
>> +	struct wmax_u32_args args = {
>> +		.operation = AWCC_OP_GET_CURRENT_PROFILE,
>> +		.arg1 = 0,
>> +		.arg2 = 0,
>> +		.arg3 = 0,
>> +	};
>> +
>> +	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
>> +}
>> +
>> +static inline int awcc_op_activate_profile(struct wmi_device *wdev, u8 profile)
>> +{
>> +	struct wmax_u32_args args = {
>> +		.operation = AWCC_OP_ACTIVATE_PROFILE,
>> +		.arg1 = profile,
>> +		.arg2 = 0,
>> +		.arg3 = 0,
>> +	};
>> +	u32 out;
>> +
>> +	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_CONTROL, &args, &out);
>> +}
>> +
>> +/*
>> + * Thermal Profile control
>> + *  - Provides thermal profile control through the Platform Profile API
>> + */
>>  static int awcc_platform_profile_get(struct device *dev,
>>  				     enum platform_profile_option *profile)
>>  {
>> @@ -536,10 +571,8 @@ static int awcc_platform_profile_get(struct device *dev,
>>  	u32 out_data;
>>  	int ret;
>>  
>> -	ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_CURRENT_PROFILE,
>> -				       0, &out_data);
>> -
>> -	if (ret < 0)
>> +	ret = awcc_op_get_current_profile(priv->wdev, &out_data);
>> +	if (ret)
>>  		return ret;
>>  
>>  	if (out_data == AWCC_THERMAL_MODE_GMODE) {
>> @@ -550,7 +583,7 @@ static int awcc_platform_profile_get(struct device *dev,
>>  	if (!is_awcc_thermal_profile_id(out_data))
>>  		return -ENODATA;
>>  
>> -	out_data &= AWCC_THERMAL_MODE_MASK;
>> +	out_data = FIELD_GET(AWCC_THERMAL_MODE_MASK, out_data);
>
> Should this be part of the earlier patch??

I think I'll leave it in this patch, but I'll move it to
awcc_op_get_resource_id().

-- 
 ~ Kurt

>
>>  	*profile = awcc_mode_to_platform_profile[out_data];
>>  
>>  	return 0;
>> @@ -583,8 +616,8 @@ static int awcc_platform_profile_set(struct device *dev,
>>  		}
>>  	}
>>  
>> -	return awcc_thermal_control(priv->wdev,
>> -				    priv->supported_thermal_profiles[profile]);
>> +	return awcc_op_activate_profile(priv->wdev,
>> +					priv->supported_thermal_profiles[profile]);
>>  }
>>  
>>  static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
>> @@ -606,8 +639,7 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
>>  	first_mode = sys_desc[0] + sys_desc[1];
>>  
>>  	for (u32 i = 0; i < sys_desc[3]; i++) {
>> -		ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_RESOURCE_ID,
>> -					       i + first_mode, &out_data);
>> +		ret = awcc_op_get_resource_id(priv->wdev, i + first_mode, &out_data);
>>  
>>  		if (ret == -EIO)
>>  			return ret;
>> 
>> 

Re: [PATCH v6 03/12] platform/x86: alienware-wmi-wmax: Improve internal AWCC API

[Ilpo Järvinen]

[-- Attachment #1: Type: text/plain, Size: 3527 bytes --]

On Fri, 28 Mar 2025, Kurt Borja wrote:

> On Fri Mar 28, 2025 at 11:51 AM -03, Ilpo Järvinen wrote:
> > On Thu, 13 Mar 2025, Kurt Borja wrote:
> >
> >> Inline all AWCC WMI helper methods and directly return the newly
> >> introduced __awcc_wmi_command() helper to simplify implementation.
> >> 
> >> Drop awcc_thermal_control() in favor of awcc_op_activate_profile().
> >> 
> >> Add awcc_op_get_resource_id(), awcc_op_get_current_profile() and a new
> >> failure code.
> >> 
> >> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> >> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
> >> ---
> >>  drivers/platform/x86/dell/alienware-wmi-wmax.c | 150 +++++++++++++++----------
> >>  1 file changed, 91 insertions(+), 59 deletions(-)
> >> 
> >> diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> >> index 80aefba5b22d6b4ac18aeb2ca356f8c911150abd..b9dbfdc8096c571722b3c7ac3e73989e235e2eb9 100644
> >> --- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
> >> +++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> >> @@ -32,6 +32,7 @@
> >>  #define AWCC_THERMAL_MODE_GMODE			0xAB
> >>  
> >>  #define AWCC_FAILURE_CODE			0xFFFFFFFF
> >> +#define AWCC_FAILURE_CODE_2			0xFFFFFFFE
> >>  #define AWCC_THERMAL_TABLE_MASK			GENMASK(7, 4)
> >>  #define AWCC_THERMAL_MODE_MASK			GENMASK(3, 0)
> >>  /* Some IDs have a BIT(8) flag that we ignore */
> >> @@ -443,8 +444,7 @@ const struct attribute_group wmax_deepsleep_attribute_group = {
> >>  };
> >>  
> >>  /*
> >> - * Thermal Profile control
> >> - *  - Provides thermal profile control through the Platform Profile API
> >> + * AWCC Helpers
> >>   */
> >>  static bool is_awcc_thermal_profile_id(u8 code)
> >>  {
> >> @@ -463,72 +463,107 @@ static bool is_awcc_thermal_profile_id(u8 code)
> >>  	return false;
> >>  }
> >>  
> >> -static int awcc_thermal_information(struct wmi_device *wdev, u8 operation,
> >> -				    u8 arg, u32 *out_data)
> >> +static int __awcc_wmi_command(struct wmi_device *wdev, u32 method_id,
> >> +			      struct wmax_u32_args *args, u32 *out)
> >
> > Why did you put __ into the name?
> >
> > Some people oppose __ prefix altogether, I don't entirely agree with their 
> > stance but I don't really understand what the underscores here signify.
> >
> > Normally I see __ being used in three main cases:
> > - non-__ variant does some locking around the call too the __ func (though 
> >   many funcs use _locked postfix these days).
> > - func is "dangerous" and caller has to really know what he/she is
> >   doing / be careful for some reason.
> > - non-__ variant exists and somebody cannot come up better name for the
> >   internally called function (not very good use case, IMHO)
> 
> Oh - I didn't know. Andy also mentioned this prefix is used for
> non-atomic versions of some functions like __set_bit().

I mentioned locking which relates to atomicity, however, here you don't 
have two variants, one without locking and the other with it so it becomes 
very non-obvious what __ means. (I know you posted v7 without it, so 
this is just a clarifying comment.)

> > I don't see any of those apply here, this looks just an ordinary wrapper 
> > function, thus the question.
> 
> I did it to indicate it's a "private" method, so it's not used directly.
> But ofc that's not the convention here, so I'll drop it.

We have "static" for that. And it's called by something anyway or it would 
be dead code :-).

-- 
 i.

[PATCH v6 04/12] platform/x86: alienware-wmi-wmax: Modify supported_thermal_profiles[]

[Kurt Borja]

Rename supported_thermal_profiles[] -> supported_profiles[] and change
it's type to u8 because it stores AWCC thermal IDs.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi-wmax.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
index b9dbfdc8096c571722b3c7ac3e73989e235e2eb9..a8a13779793abbcc8d1263474cac6227d524a6f5 100644
--- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
+++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
@@ -213,7 +213,7 @@ struct wmax_u32_args {
 struct awcc_priv {
 	struct wmi_device *wdev;
 	struct device *ppdev;
-	enum awcc_thermal_profile supported_thermal_profiles[PLATFORM_PROFILE_LAST];
+	u8 supported_profiles[PLATFORM_PROFILE_LAST];
 };
 
 static const enum platform_profile_option awcc_mode_to_platform_profile[AWCC_PROFILE_LAST] = {
@@ -616,8 +616,7 @@ static int awcc_platform_profile_set(struct device *dev,
 		}
 	}
 
-	return awcc_op_activate_profile(priv->wdev,
-					priv->supported_thermal_profiles[profile]);
+	return awcc_op_activate_profile(priv->wdev, priv->supported_profiles[profile]);
 }
 
 static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
@@ -653,7 +652,7 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
 
 		mode = FIELD_GET(AWCC_THERMAL_MODE_MASK, id);
 		profile = awcc_mode_to_platform_profile[mode];
-		priv->supported_thermal_profiles[profile] = id;
+		priv->supported_profiles[profile] = id;
 
 		set_bit(profile, choices);
 	}
@@ -662,7 +661,7 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
 		return -ENODEV;
 
 	if (awcc->gmode) {
-		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
+		priv->supported_profiles[PLATFORM_PROFILE_PERFORMANCE] =
 			AWCC_THERMAL_MODE_GMODE;
 
 		set_bit(PLATFORM_PROFILE_PERFORMANCE, choices);

-- 
2.48.1

[PATCH v6 05/12] platform/x86: alienware-wmi-wmax: Improve platform profile probe

[Kurt Borja]

Get and store the AWCC system description in alienware_awcc_setup()
instead of awcc_platform_profile_probe() and add a check for integer
overflows to avoid misbehaviors.

While at it, replace set_bit() with it's non-atomic version __set_bit()
because `choices` belong to this thread only.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi-wmax.c | 61 +++++++++++++++++++-------
 1 file changed, 46 insertions(+), 15 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
index a8a13779793abbcc8d1263474cac6227d524a6f5..0530f25b956f73f47c0354f40dac2910448c894e 100644
--- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
+++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
@@ -38,6 +38,9 @@
 /* Some IDs have a BIT(8) flag that we ignore */
 #define AWCC_RESOURCE_ID_MASK			GENMASK(7, 0)
 
+/* Arbitrary limit based on supported models */
+#define AWCC_MAX_RES_COUNT			16
+
 static bool force_platform_profile;
 module_param_unsafe(force_platform_profile, bool, 0);
 MODULE_PARM_DESC(force_platform_profile, "Forces auto-detecting thermal profiles without checking if WMI thermal backend is available");
@@ -212,6 +215,17 @@ struct wmax_u32_args {
 
 struct awcc_priv {
 	struct wmi_device *wdev;
+	union {
+		u32 system_description;
+		struct {
+			u8 fan_count;
+			u8 temp_count;
+			u8 unknown_count;
+			u8 profile_count;
+		};
+		u8 res_count[4];
+	};
+
 	struct device *ppdev;
 	u8 supported_profiles[PLATFORM_PROFILE_LAST];
 };
@@ -624,37 +638,40 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
 	enum platform_profile_option profile;
 	struct awcc_priv *priv = drvdata;
 	enum awcc_thermal_profile mode;
-	u8 sys_desc[4];
-	u32 first_mode;
+	u8 id, offset = 0;
 	u32 out_data;
 	int ret;
-	u8 id;
 
-	ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_SYSTEM_DESCRIPTION,
-				       0, (u32 *) &sys_desc);
-	if (ret < 0)
-		return ret;
-
-	first_mode = sys_desc[0] + sys_desc[1];
-
-	for (u32 i = 0; i < sys_desc[3]; i++) {
-		ret = awcc_op_get_resource_id(priv->wdev, i + first_mode, &out_data);
+	/*
+	 * Thermal profile IDs are listed last at offset
+	 *	fan_count + temp_count + unknown_count
+	 */
+	for (unsigned int i = 0; i < ARRAY_SIZE(priv->res_count) - 1; i++)
+		offset += priv->res_count[i];
 
+	for (unsigned int i = 0; i < priv->profile_count; i++) {
+		ret = awcc_op_get_resource_id(priv->wdev, i + offset, &out_data);
 		if (ret == -EIO)
 			return ret;
 
+		/*
+		 * Some devices report an incorrect number of thermal profiles
+		 * so the resource ID list may end prematurely
+		 */
 		if (ret == -EBADRQC)
 			break;
 
 		id = FIELD_GET(AWCC_RESOURCE_ID_MASK, out_data);
-		if (!is_awcc_thermal_profile_id(id))
+		if (!is_awcc_thermal_profile_id(id)) {
+			dev_dbg(&priv->wdev->dev, "Unmapped thermal profile ID 0x%02x\n", id);
 			continue;
+		}
 
 		mode = FIELD_GET(AWCC_THERMAL_MODE_MASK, id);
 		profile = awcc_mode_to_platform_profile[mode];
 		priv->supported_profiles[profile] = id;
 
-		set_bit(profile, choices);
+		__set_bit(profile, choices);
 	}
 
 	if (bitmap_empty(choices, PLATFORM_PROFILE_LAST))
@@ -664,7 +681,7 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
 		priv->supported_profiles[PLATFORM_PROFILE_PERFORMANCE] =
 			AWCC_THERMAL_MODE_GMODE;
 
-		set_bit(PLATFORM_PROFILE_PERFORMANCE, choices);
+		__set_bit(PLATFORM_PROFILE_PERFORMANCE, choices);
 	}
 
 	return 0;
@@ -695,6 +712,20 @@ static int alienware_awcc_setup(struct wmi_device *wdev)
 	if (!priv)
 		return -ENOMEM;
 
+	ret = awcc_thermal_information(wdev, AWCC_OP_GET_SYSTEM_DESCRIPTION,
+				       0, &priv->system_description);
+	if (ret < 0)
+		return ret;
+
+	/* Sanity check */
+	for (unsigned int i = 0; i < ARRAY_SIZE(priv->res_count); i++) {
+		if (priv->res_count[i] > AWCC_MAX_RES_COUNT) {
+			dev_err(&wdev->dev, "Malformed system description: 0x%08x\n",
+				priv->system_description);
+			return -ENXIO;
+		}
+	}
+
 	priv->wdev = wdev;
 	dev_set_drvdata(&wdev->dev, priv);
 

-- 
2.48.1

Re: [PATCH v6 05/12] platform/x86: alienware-wmi-wmax: Improve platform profile probe

[Ilpo Järvinen]

On Thu, 13 Mar 2025, Kurt Borja wrote:

> Get and store the AWCC system description in alienware_awcc_setup()
> instead of awcc_platform_profile_probe() and add a check for integer
> overflows to avoid misbehaviors.
> 
> While at it, replace set_bit() with it's non-atomic version __set_bit()
> because `choices` belong to this thread only.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
> ---
>  drivers/platform/x86/dell/alienware-wmi-wmax.c | 61 +++++++++++++++++++-------
>  1 file changed, 46 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> index a8a13779793abbcc8d1263474cac6227d524a6f5..0530f25b956f73f47c0354f40dac2910448c894e 100644
> --- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
> +++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> @@ -38,6 +38,9 @@
>  /* Some IDs have a BIT(8) flag that we ignore */
>  #define AWCC_RESOURCE_ID_MASK			GENMASK(7, 0)
>  
> +/* Arbitrary limit based on supported models */
> +#define AWCC_MAX_RES_COUNT			16
> +
>  static bool force_platform_profile;
>  module_param_unsafe(force_platform_profile, bool, 0);
>  MODULE_PARM_DESC(force_platform_profile, "Forces auto-detecting thermal profiles without checking if WMI thermal backend is available");
> @@ -212,6 +215,17 @@ struct wmax_u32_args {
>  
>  struct awcc_priv {
>  	struct wmi_device *wdev;
> +	union {
> +		u32 system_description;
> +		struct {
> +			u8 fan_count;
> +			u8 temp_count;
> +			u8 unknown_count;
> +			u8 profile_count;
> +		};
> +		u8 res_count[4];
> +	};
> +
>  	struct device *ppdev;
>  	u8 supported_profiles[PLATFORM_PROFILE_LAST];
>  };
> @@ -624,37 +638,40 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
>  	enum platform_profile_option profile;
>  	struct awcc_priv *priv = drvdata;
>  	enum awcc_thermal_profile mode;
> -	u8 sys_desc[4];
> -	u32 first_mode;
> +	u8 id, offset = 0;
>  	u32 out_data;
>  	int ret;
> -	u8 id;
>  
> -	ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_SYSTEM_DESCRIPTION,
> -				       0, (u32 *) &sys_desc);
> -	if (ret < 0)
> -		return ret;
> -
> -	first_mode = sys_desc[0] + sys_desc[1];
> -
> -	for (u32 i = 0; i < sys_desc[3]; i++) {
> -		ret = awcc_op_get_resource_id(priv->wdev, i + first_mode, &out_data);
> +	/*
> +	 * Thermal profile IDs are listed last at offset
> +	 *	fan_count + temp_count + unknown_count
> +	 */
> +	for (unsigned int i = 0; i < ARRAY_SIZE(priv->res_count) - 1; i++)
> +		offset += priv->res_count[i];

Doesn't this change go slightly beyond what its changelog describes, could 
you please amend the changelog to explain it.
>  
> +	for (unsigned int i = 0; i < priv->profile_count; i++) {
> +		ret = awcc_op_get_resource_id(priv->wdev, i + offset, &out_data);
>  		if (ret == -EIO)
>  			return ret;
>  
> +		/*
> +		 * Some devices report an incorrect number of thermal profiles
> +		 * so the resource ID list may end prematurely
> +		 */
>  		if (ret == -EBADRQC)
>  			break;
>  
>  		id = FIELD_GET(AWCC_RESOURCE_ID_MASK, out_data);
> -		if (!is_awcc_thermal_profile_id(id))
> +		if (!is_awcc_thermal_profile_id(id)) {
> +			dev_dbg(&priv->wdev->dev, "Unmapped thermal profile ID 0x%02x\n", id);
>  			continue;
> +		}
>  
>  		mode = FIELD_GET(AWCC_THERMAL_MODE_MASK, id);
>  		profile = awcc_mode_to_platform_profile[mode];
>  		priv->supported_profiles[profile] = id;
>  
> -		set_bit(profile, choices);
> +		__set_bit(profile, choices);
>  	}
>  
>  	if (bitmap_empty(choices, PLATFORM_PROFILE_LAST))
> @@ -664,7 +681,7 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
>  		priv->supported_profiles[PLATFORM_PROFILE_PERFORMANCE] =
>  			AWCC_THERMAL_MODE_GMODE;
>  
> -		set_bit(PLATFORM_PROFILE_PERFORMANCE, choices);
> +		__set_bit(PLATFORM_PROFILE_PERFORMANCE, choices);
>  	}
>  
>  	return 0;
> @@ -695,6 +712,20 @@ static int alienware_awcc_setup(struct wmi_device *wdev)
>  	if (!priv)
>  		return -ENOMEM;
>  
> +	ret = awcc_thermal_information(wdev, AWCC_OP_GET_SYSTEM_DESCRIPTION,
> +				       0, &priv->system_description);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Sanity check */
> +	for (unsigned int i = 0; i < ARRAY_SIZE(priv->res_count); i++) {
> +		if (priv->res_count[i] > AWCC_MAX_RES_COUNT) {
> +			dev_err(&wdev->dev, "Malformed system description: 0x%08x\n",
> +				priv->system_description);
> +			return -ENXIO;
> +		}
> +	}
> +
>  	priv->wdev = wdev;
>  	dev_set_drvdata(&wdev->dev, priv);
>  
> 
> 

-- 
 i.

Re: [PATCH v6 05/12] platform/x86: alienware-wmi-wmax: Improve platform profile probe

[Kurt Borja]

On Fri Mar 28, 2025 at 12:03 PM -03, Ilpo Järvinen wrote:
> On Thu, 13 Mar 2025, Kurt Borja wrote:
>
>> Get and store the AWCC system description in alienware_awcc_setup()
>> instead of awcc_platform_profile_probe() and add a check for integer
>> overflows to avoid misbehaviors.
>> 
>> While at it, replace set_bit() with it's non-atomic version __set_bit()
>> because `choices` belong to this thread only.
>> 
>> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
>> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
>> ---
>>  drivers/platform/x86/dell/alienware-wmi-wmax.c | 61 +++++++++++++++++++-------
>>  1 file changed, 46 insertions(+), 15 deletions(-)
>> 
>> diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
>> index a8a13779793abbcc8d1263474cac6227d524a6f5..0530f25b956f73f47c0354f40dac2910448c894e 100644
>> --- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
>> +++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
>> @@ -38,6 +38,9 @@
>>  /* Some IDs have a BIT(8) flag that we ignore */
>>  #define AWCC_RESOURCE_ID_MASK			GENMASK(7, 0)
>>  
>> +/* Arbitrary limit based on supported models */
>> +#define AWCC_MAX_RES_COUNT			16
>> +
>>  static bool force_platform_profile;
>>  module_param_unsafe(force_platform_profile, bool, 0);
>>  MODULE_PARM_DESC(force_platform_profile, "Forces auto-detecting thermal profiles without checking if WMI thermal backend is available");
>> @@ -212,6 +215,17 @@ struct wmax_u32_args {
>>  
>>  struct awcc_priv {
>>  	struct wmi_device *wdev;
>> +	union {
>> +		u32 system_description;
>> +		struct {
>> +			u8 fan_count;
>> +			u8 temp_count;
>> +			u8 unknown_count;
>> +			u8 profile_count;
>> +		};
>> +		u8 res_count[4];
>> +	};
>> +
>>  	struct device *ppdev;
>>  	u8 supported_profiles[PLATFORM_PROFILE_LAST];
>>  };
>> @@ -624,37 +638,40 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
>>  	enum platform_profile_option profile;
>>  	struct awcc_priv *priv = drvdata;
>>  	enum awcc_thermal_profile mode;
>> -	u8 sys_desc[4];
>> -	u32 first_mode;
>> +	u8 id, offset = 0;
>>  	u32 out_data;
>>  	int ret;
>> -	u8 id;
>>  
>> -	ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_SYSTEM_DESCRIPTION,
>> -				       0, (u32 *) &sys_desc);
>> -	if (ret < 0)
>> -		return ret;
>> -
>> -	first_mode = sys_desc[0] + sys_desc[1];
>> -
>> -	for (u32 i = 0; i < sys_desc[3]; i++) {
>> -		ret = awcc_op_get_resource_id(priv->wdev, i + first_mode, &out_data);
>> +	/*
>> +	 * Thermal profile IDs are listed last at offset
>> +	 *	fan_count + temp_count + unknown_count
>> +	 */
>> +	for (unsigned int i = 0; i < ARRAY_SIZE(priv->res_count) - 1; i++)
>> +		offset += priv->res_count[i];
>
> Doesn't this change go slightly beyond what its changelog describes, could 
> you please amend the changelog to explain it.

Sure! Only difference would be that now we also sum the unknown_ids.
I'll mention it.

>>  
>> +	for (unsigned int i = 0; i < priv->profile_count; i++) {
>> +		ret = awcc_op_get_resource_id(priv->wdev, i + offset, &out_data);
>>  		if (ret == -EIO)
>>  			return ret;
>>  
>> +		/*
>> +		 * Some devices report an incorrect number of thermal profiles
>> +		 * so the resource ID list may end prematurely
>> +		 */
>>  		if (ret == -EBADRQC)
>>  			break;
>>  
>>  		id = FIELD_GET(AWCC_RESOURCE_ID_MASK, out_data);
>> -		if (!is_awcc_thermal_profile_id(id))
>> +		if (!is_awcc_thermal_profile_id(id)) {
>> +			dev_dbg(&priv->wdev->dev, "Unmapped thermal profile ID 0x%02x\n", id);
>>  			continue;
>> +		}
>>  
>>  		mode = FIELD_GET(AWCC_THERMAL_MODE_MASK, id);
>>  		profile = awcc_mode_to_platform_profile[mode];
>>  		priv->supported_profiles[profile] = id;
>>  
>> -		set_bit(profile, choices);
>> +		__set_bit(profile, choices);
>>  	}
>>  
>>  	if (bitmap_empty(choices, PLATFORM_PROFILE_LAST))
>> @@ -664,7 +681,7 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
>>  		priv->supported_profiles[PLATFORM_PROFILE_PERFORMANCE] =
>>  			AWCC_THERMAL_MODE_GMODE;
>>  
>> -		set_bit(PLATFORM_PROFILE_PERFORMANCE, choices);
>> +		__set_bit(PLATFORM_PROFILE_PERFORMANCE, choices);
>>  	}
>>  
>>  	return 0;
>> @@ -695,6 +712,20 @@ static int alienware_awcc_setup(struct wmi_device *wdev)
>>  	if (!priv)
>>  		return -ENOMEM;
>>  
>> +	ret = awcc_thermal_information(wdev, AWCC_OP_GET_SYSTEM_DESCRIPTION,
>> +				       0, &priv->system_description);
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	/* Sanity check */
>> +	for (unsigned int i = 0; i < ARRAY_SIZE(priv->res_count); i++) {
>> +		if (priv->res_count[i] > AWCC_MAX_RES_COUNT) {
>> +			dev_err(&wdev->dev, "Malformed system description: 0x%08x\n",
>> +				priv->system_description);
>> +			return -ENXIO;
>> +		}
>> +	}
>> +
>>  	priv->wdev = wdev;
>>  	dev_set_drvdata(&wdev->dev, priv);
>>  
>> 
>> 

[PATCH v6 06/12] platform/x86: alienware-wmi-wmax: Add support for the "custom" thermal profile

[Kurt Borja]

All models with the "AWCC" WMAX device support a "custom" thermal
profile. In some models this profile signals user-space that the user
wants to manually control the fans, which are always unlocked. In other
models it actually unlocks manual fan control.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi-wmax.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
index 0530f25b956f73f47c0354f40dac2910448c894e..3b37e4456482bc284b8e867c1c5b6255fc6c8ef2 100644
--- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
+++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
@@ -29,8 +29,6 @@
 #define AWCC_METHOD_THERMAL_CONTROL		0x15
 #define AWCC_METHOD_GAME_SHIFT_STATUS		0x25
 
-#define AWCC_THERMAL_MODE_GMODE			0xAB
-
 #define AWCC_FAILURE_CODE			0xFFFFFFFF
 #define AWCC_FAILURE_CODE_2			0xFFFFFFFE
 #define AWCC_THERMAL_TABLE_MASK			GENMASK(7, 4)
@@ -177,6 +175,11 @@ enum AWCC_THERMAL_TABLES {
 	AWCC_THERMAL_TABLE_USTT			= 0xA,
 };
 
+enum AWCC_SPECIAL_THERMAL_CODES {
+	AWCC_SPECIAL_PROFILE_CUSTOM		= 0x00,
+	AWCC_SPECIAL_PROFILE_GMODE		= 0xAB,
+};
+
 enum awcc_thermal_profile {
 	AWCC_PROFILE_USTT_BALANCED,
 	AWCC_PROFILE_USTT_BALANCED_PERFORMANCE,
@@ -589,9 +592,15 @@ static int awcc_platform_profile_get(struct device *dev,
 	if (ret)
 		return ret;
 
-	if (out_data == AWCC_THERMAL_MODE_GMODE) {
+	switch (out_data) {
+	case AWCC_SPECIAL_PROFILE_CUSTOM:
+		*profile = PLATFORM_PROFILE_CUSTOM;
+		return 0;
+	case AWCC_SPECIAL_PROFILE_GMODE:
 		*profile = PLATFORM_PROFILE_PERFORMANCE;
 		return 0;
+	default:
+		break;
 	}
 
 	if (!is_awcc_thermal_profile_id(out_data))
@@ -679,11 +688,17 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
 
 	if (awcc->gmode) {
 		priv->supported_profiles[PLATFORM_PROFILE_PERFORMANCE] =
-			AWCC_THERMAL_MODE_GMODE;
+			AWCC_SPECIAL_PROFILE_GMODE;
 
 		__set_bit(PLATFORM_PROFILE_PERFORMANCE, choices);
 	}
 
+	/* Every model supports the "custom" profile */
+	priv->supported_profiles[PLATFORM_PROFILE_CUSTOM] =
+		AWCC_SPECIAL_PROFILE_CUSTOM;
+
+	__set_bit(PLATFORM_PROFILE_CUSTOM, choices);
+
 	return 0;
 }
 

-- 
2.48.1

Re: [PATCH v6 06/12] platform/x86: alienware-wmi-wmax: Add support for the "custom" thermal profile

[Ilpo Järvinen]

[-- Attachment #1: Type: text/plain, Size: 2649 bytes --]

On Thu, 13 Mar 2025, Kurt Borja wrote:

> All models with the "AWCC" WMAX device support a "custom" thermal
> profile. In some models this profile signals user-space that the user
> wants to manually control the fans, which are always unlocked. In other
> models it actually unlocks manual fan control.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

-- 
 i.

> ---
>  drivers/platform/x86/dell/alienware-wmi-wmax.c | 23 +++++++++++++++++++----
>  1 file changed, 19 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> index 0530f25b956f73f47c0354f40dac2910448c894e..3b37e4456482bc284b8e867c1c5b6255fc6c8ef2 100644
> --- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
> +++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> @@ -29,8 +29,6 @@
>  #define AWCC_METHOD_THERMAL_CONTROL		0x15
>  #define AWCC_METHOD_GAME_SHIFT_STATUS		0x25
>  
> -#define AWCC_THERMAL_MODE_GMODE			0xAB
> -
>  #define AWCC_FAILURE_CODE			0xFFFFFFFF
>  #define AWCC_FAILURE_CODE_2			0xFFFFFFFE
>  #define AWCC_THERMAL_TABLE_MASK			GENMASK(7, 4)
> @@ -177,6 +175,11 @@ enum AWCC_THERMAL_TABLES {
>  	AWCC_THERMAL_TABLE_USTT			= 0xA,
>  };
>  
> +enum AWCC_SPECIAL_THERMAL_CODES {
> +	AWCC_SPECIAL_PROFILE_CUSTOM		= 0x00,
> +	AWCC_SPECIAL_PROFILE_GMODE		= 0xAB,
> +};
> +
>  enum awcc_thermal_profile {
>  	AWCC_PROFILE_USTT_BALANCED,
>  	AWCC_PROFILE_USTT_BALANCED_PERFORMANCE,
> @@ -589,9 +592,15 @@ static int awcc_platform_profile_get(struct device *dev,
>  	if (ret)
>  		return ret;
>  
> -	if (out_data == AWCC_THERMAL_MODE_GMODE) {
> +	switch (out_data) {
> +	case AWCC_SPECIAL_PROFILE_CUSTOM:
> +		*profile = PLATFORM_PROFILE_CUSTOM;
> +		return 0;
> +	case AWCC_SPECIAL_PROFILE_GMODE:
>  		*profile = PLATFORM_PROFILE_PERFORMANCE;
>  		return 0;
> +	default:
> +		break;
>  	}
>  
>  	if (!is_awcc_thermal_profile_id(out_data))
> @@ -679,11 +688,17 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
>  
>  	if (awcc->gmode) {
>  		priv->supported_profiles[PLATFORM_PROFILE_PERFORMANCE] =
> -			AWCC_THERMAL_MODE_GMODE;
> +			AWCC_SPECIAL_PROFILE_GMODE;
>  
>  		__set_bit(PLATFORM_PROFILE_PERFORMANCE, choices);
>  	}
>  
> +	/* Every model supports the "custom" profile */
> +	priv->supported_profiles[PLATFORM_PROFILE_CUSTOM] =
> +		AWCC_SPECIAL_PROFILE_CUSTOM;
> +
> +	__set_bit(PLATFORM_PROFILE_CUSTOM, choices);
> +
>  	return 0;
>  }
>  
> 
> 

[PATCH v6 07/12] platform/x86: alienware-wmi-wmax: Add HWMON support

[Kurt Borja]

All models with the "AWCC" WMAX device support monitoring fan speed and
temperature sensors. Expose this feature through the HWMON interface.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/Kconfig              |   1 +
 drivers/platform/x86/dell/alienware-wmi-wmax.c | 396 +++++++++++++++++++++++++
 2 files changed, 397 insertions(+)

diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig
index f8a0dffcaab7c3b423472c5b9093011334a698c8..f7107b0c55f27c9be70f50b36dd2e7bab42a6960 100644
--- a/drivers/platform/x86/dell/Kconfig
+++ b/drivers/platform/x86/dell/Kconfig
@@ -22,6 +22,7 @@ config ALIENWARE_WMI
 	depends on DMI
 	depends on LEDS_CLASS
 	depends on NEW_LEDS
+	depends on HWMON
 	help
 	 This is a driver for controlling Alienware WMI driven features.
 
diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
index 3b37e4456482bc284b8e867c1c5b6255fc6c8ef2..0c30ffb6091a15d81f4dc959dfd28417249d3dda 100644
--- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
+++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
@@ -9,10 +9,13 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/bitfield.h>
+#include <linux/bitmap.h>
 #include <linux/bits.h>
 #include <linux/dmi.h>
+#include <linux/hwmon.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_profile.h>
+#include <linux/units.h>
 #include <linux/wmi.h>
 #include "alienware-wmi.h"
 
@@ -25,6 +28,7 @@
 #define WMAX_METHOD_BRIGHTNESS			0x3
 #define WMAX_METHOD_ZONE_CONTROL		0x4
 
+#define AWCC_METHOD_GET_FAN_SENSORS		0x13
 #define AWCC_METHOD_THERMAL_INFORMATION		0x14
 #define AWCC_METHOD_THERMAL_CONTROL		0x15
 #define AWCC_METHOD_GAME_SHIFT_STATUS		0x25
@@ -38,6 +42,12 @@
 
 /* Arbitrary limit based on supported models */
 #define AWCC_MAX_RES_COUNT			16
+#define AWCC_ID_BITMAP_SIZE			(U8_MAX + 1)
+#define AWCC_ID_BITMAP_LONGS			BITS_TO_LONGS(AWCC_ID_BITMAP_SIZE)
+
+static bool force_hwmon;
+module_param_unsafe(force_hwmon, bool, 0);
+MODULE_PARM_DESC(force_hwmon, "Force probing for HWMON support without checking if the WMI backend is available");
 
 static bool force_platform_profile;
 module_param_unsafe(force_platform_profile, bool, 0);
@@ -48,16 +58,19 @@ module_param_unsafe(force_gmode, bool, 0);
 MODULE_PARM_DESC(force_gmode, "Forces G-Mode when performance profile is selected");
 
 struct awcc_quirks {
+	bool hwmon;
 	bool pprof;
 	bool gmode;
 };
 
 static struct awcc_quirks g_series_quirks = {
+	.hwmon = true,
 	.pprof = true,
 	.gmode = true,
 };
 
 static struct awcc_quirks generic_quirks = {
+	.hwmon = true,
 	.pprof = true,
 	.gmode = false,
 };
@@ -155,9 +168,18 @@ static const struct dmi_system_id awcc_dmi_table[] __initconst = {
 	},
 };
 
+enum AWCC_GET_FAN_SENSORS_OPERATIONS {
+	AWCC_OP_GET_TOTAL_FAN_TEMPS		= 0x01,
+	AWCC_OP_GET_FAN_TEMP_ID			= 0x02,
+};
+
 enum AWCC_THERMAL_INFORMATION_OPERATIONS {
 	AWCC_OP_GET_SYSTEM_DESCRIPTION		= 0x02,
 	AWCC_OP_GET_RESOURCE_ID			= 0x03,
+	AWCC_OP_GET_TEMPERATURE			= 0x04,
+	AWCC_OP_GET_FAN_RPM			= 0x05,
+	AWCC_OP_GET_FAN_MIN_RPM			= 0x08,
+	AWCC_OP_GET_FAN_MAX_RPM			= 0x09,
 	AWCC_OP_GET_CURRENT_PROFILE		= 0x0B,
 };
 
@@ -180,6 +202,11 @@ enum AWCC_SPECIAL_THERMAL_CODES {
 	AWCC_SPECIAL_PROFILE_GMODE		= 0xAB,
 };
 
+enum AWCC_TEMP_SENSOR_TYPES {
+	AWCC_TEMP_SENSOR_CPU			= 0x01,
+	AWCC_TEMP_SENSOR_GPU			= 0x06,
+};
+
 enum awcc_thermal_profile {
 	AWCC_PROFILE_USTT_BALANCED,
 	AWCC_PROFILE_USTT_BALANCED_PERFORMANCE,
@@ -216,6 +243,14 @@ struct wmax_u32_args {
 	u8 arg3;
 };
 
+struct awcc_fan_data {
+	unsigned long auto_channels_temp;
+	const char *label;
+	u32 min_rpm;
+	u32 max_rpm;
+	u8 id;
+};
+
 struct awcc_priv {
 	struct wmi_device *wdev;
 	union {
@@ -231,6 +266,10 @@ struct awcc_priv {
 
 	struct device *ppdev;
 	u8 supported_profiles[PLATFORM_PROFILE_LAST];
+
+	struct device *hwdev;
+	struct awcc_fan_data **fan_data;
+	unsigned long temp_sensors[AWCC_ID_BITMAP_LONGS];
 };
 
 static const enum platform_profile_option awcc_mode_to_platform_profile[AWCC_PROFILE_LAST] = {
@@ -495,6 +534,19 @@ static int __awcc_wmi_command(struct wmi_device *wdev, u32 method_id,
 	return 0;
 }
 
+static inline int awcc_get_fan_sensors(struct wmi_device *wdev, u8 operation,
+				       u8 fan_id, u8 index, u32 *out)
+{
+	struct wmax_u32_args args = {
+		.operation = operation,
+		.arg1 = fan_id,
+		.arg2 = index,
+		.arg3 = 0,
+	};
+
+	return __awcc_wmi_command(wdev, AWCC_METHOD_GET_FAN_SENSORS, &args, out);
+}
+
 static inline int awcc_thermal_information(struct wmi_device *wdev, u8 operation,
 					   u8 arg, u32 *out)
 {
@@ -552,6 +604,30 @@ static inline int awcc_op_get_resource_id(struct wmi_device *wdev, u8 index, u32
 	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
 }
 
+static inline int awcc_op_get_fan_rpm(struct wmi_device *wdev, u8 fan_id, u32 *out)
+{
+	struct wmax_u32_args args = {
+		.operation = AWCC_OP_GET_FAN_RPM,
+		.arg1 = fan_id,
+		.arg2 = 0,
+		.arg3 = 0,
+	};
+
+	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
+}
+
+static inline int awcc_op_get_temperature(struct wmi_device *wdev, u8 temp_id, u32 *out)
+{
+	struct wmax_u32_args args = {
+		.operation = AWCC_OP_GET_TEMPERATURE,
+		.arg1 = temp_id,
+		.arg2 = 0,
+		.arg3 = 0,
+	};
+
+	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
+}
+
 static inline int awcc_op_get_current_profile(struct wmi_device *wdev, u32 *out)
 {
 	struct wmax_u32_args args = {
@@ -577,6 +653,313 @@ static inline int awcc_op_activate_profile(struct wmi_device *wdev, u8 profile)
 	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_CONTROL, &args, &out);
 }
 
+/*
+ * HWMON
+ *  - Provides temperature and fan speed monitoring as well as manual fan
+ *    control
+ */
+static umode_t awcc_hwmon_is_visible(const void *drvdata, enum hwmon_sensor_types type,
+				     u32 attr, int channel)
+{
+	const struct awcc_priv *priv = drvdata;
+	unsigned int temp_count;
+
+	switch (type) {
+	case hwmon_temp:
+		temp_count = bitmap_weight(priv->temp_sensors, AWCC_ID_BITMAP_SIZE);
+
+		return channel < temp_count ? 0444 : 0;
+	case hwmon_fan:
+		return channel < priv->fan_count ? 0444 : 0;
+	case hwmon_pwm:
+		return channel < priv->fan_count ? 0444 : 0;
+	default:
+		return 0;
+	}
+}
+
+static int awcc_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+			   u32 attr, int channel, long *val)
+{
+	struct awcc_priv *priv = dev_get_drvdata(dev);
+	const struct awcc_fan_data *fan;
+	u32 state;
+	int ret;
+	u8 temp;
+
+	switch (type) {
+	case hwmon_temp:
+		temp = find_nth_bit(priv->temp_sensors, AWCC_ID_BITMAP_SIZE, channel);
+
+		switch (attr) {
+		case hwmon_temp_input:
+			ret = awcc_op_get_temperature(priv->wdev, temp, &state);
+			if (ret)
+				return ret;
+
+			*val = state * MILLIDEGREE_PER_DEGREE;
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+
+		break;
+	case hwmon_fan:
+		fan = priv->fan_data[channel];
+
+		switch (attr) {
+		case hwmon_fan_input:
+			ret = awcc_op_get_fan_rpm(priv->wdev, fan->id, &state);
+			if (ret)
+				return ret;
+
+			*val = state;
+			break;
+		case hwmon_fan_min:
+			*val = fan->min_rpm;
+			break;
+		case hwmon_fan_max:
+			*val = fan->max_rpm;
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+
+		break;
+	case hwmon_pwm:
+		fan = priv->fan_data[channel];
+
+		switch (attr) {
+		case hwmon_pwm_auto_channels_temp:
+			*val = fan->auto_channels_temp;
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int awcc_hwmon_read_string(struct device *dev, enum hwmon_sensor_types type,
+				  u32 attr, int channel, const char **str)
+{
+	struct awcc_priv *priv = dev_get_drvdata(dev);
+	u8 temp;
+
+	switch (type) {
+	case hwmon_temp:
+		temp = find_nth_bit(priv->temp_sensors, AWCC_ID_BITMAP_SIZE, channel);
+
+		switch (temp) {
+		case AWCC_TEMP_SENSOR_CPU:
+			*str = "CPU";
+			break;
+		case AWCC_TEMP_SENSOR_GPU:
+			*str = "GPU";
+			break;
+		default:
+			*str = "Unknown";
+			break;
+		}
+
+		break;
+	case hwmon_fan:
+		*str = priv->fan_data[channel]->label;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static const struct hwmon_ops awcc_hwmon_ops = {
+	.is_visible = awcc_hwmon_is_visible,
+	.read = awcc_hwmon_read,
+	.read_string = awcc_hwmon_read_string,
+};
+
+static const struct hwmon_channel_info * const awcc_hwmon_info[] = {
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_LABEL | HWMON_T_INPUT,
+			   HWMON_T_LABEL | HWMON_T_INPUT,
+			   HWMON_T_LABEL | HWMON_T_INPUT,
+			   HWMON_T_LABEL | HWMON_T_INPUT,
+			   HWMON_T_LABEL | HWMON_T_INPUT,
+			   HWMON_T_LABEL | HWMON_T_INPUT
+			   ),
+	HWMON_CHANNEL_INFO(fan,
+			   HWMON_F_LABEL | HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX,
+			   HWMON_F_LABEL | HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX,
+			   HWMON_F_LABEL | HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX,
+			   HWMON_F_LABEL | HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX,
+			   HWMON_F_LABEL | HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX,
+			   HWMON_F_LABEL | HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX
+			   ),
+	HWMON_CHANNEL_INFO(pwm,
+			   HWMON_PWM_AUTO_CHANNELS_TEMP,
+			   HWMON_PWM_AUTO_CHANNELS_TEMP,
+			   HWMON_PWM_AUTO_CHANNELS_TEMP,
+			   HWMON_PWM_AUTO_CHANNELS_TEMP,
+			   HWMON_PWM_AUTO_CHANNELS_TEMP,
+			   HWMON_PWM_AUTO_CHANNELS_TEMP
+			   ),
+	NULL
+};
+
+static const struct hwmon_chip_info awcc_hwmon_chip_info = {
+	.ops = &awcc_hwmon_ops,
+	.info = awcc_hwmon_info,
+};
+
+static int awcc_hwmon_temps_init(struct wmi_device *wdev)
+{
+	struct awcc_priv *priv = dev_get_drvdata(&wdev->dev);
+	unsigned int i;
+	int ret;
+	u32 id;
+
+	for (i = 0; i < priv->temp_count; i++) {
+		/*
+		 * Temperature sensors IDs are listed after the fan IDs at
+		 * offset `fan_count`
+		 */
+		ret = awcc_op_get_resource_id(wdev, i + priv->fan_count, &id);
+		if (ret)
+			return ret;
+
+		__set_bit(FIELD_GET(AWCC_RESOURCE_ID_MASK, id), priv->temp_sensors);
+	}
+
+	return 0;
+}
+
+static char *awcc_get_fan_label(struct device *dev, u32 temp_count, u8 temp_id)
+{
+	char *label;
+
+	switch (temp_count) {
+	case 0:
+		label = "Independent Fan";
+		break;
+	case 1:
+		switch (temp_id) {
+		case AWCC_TEMP_SENSOR_CPU:
+			label = "Processor Fan";
+			break;
+		case AWCC_TEMP_SENSOR_GPU:
+			label = "Video Fan";
+			break;
+		default:
+			label = "Unknown Fan";
+			break;
+		}
+
+		break;
+	default:
+		label = "Shared Fan";
+		break;
+	}
+
+	return label;
+}
+
+static int awcc_hwmon_fans_init(struct wmi_device *wdev)
+{
+	struct awcc_priv *priv = dev_get_drvdata(&wdev->dev);
+	u32 id, min_rpm, max_rpm, temp_count, temp_id;
+	unsigned long fan_temps[AWCC_ID_BITMAP_LONGS];
+	unsigned long gather[AWCC_ID_BITMAP_LONGS];
+	struct awcc_fan_data *fan_data;
+	unsigned int i, j;
+	char *label;
+	int ret;
+
+	for (i = 0; i < priv->fan_count; i++) {
+		fan_data = devm_kzalloc(&wdev->dev, sizeof(*fan_data), GFP_KERNEL);
+		if (!fan_data)
+			return -ENOMEM;
+
+		/*
+		 * Fan IDs are listed first at offset 0
+		 */
+		ret = awcc_op_get_resource_id(wdev, i, &id);
+		if (ret)
+			return ret;
+		id = FIELD_GET(AWCC_RESOURCE_ID_MASK, id);
+
+		ret = awcc_thermal_information(wdev, AWCC_OP_GET_FAN_MIN_RPM, id,
+					       &min_rpm);
+		if (ret)
+			return ret;
+
+		ret = awcc_thermal_information(wdev, AWCC_OP_GET_FAN_MAX_RPM, id,
+					       &max_rpm);
+		if (ret)
+			return ret;
+
+		ret = awcc_get_fan_sensors(wdev, AWCC_OP_GET_TOTAL_FAN_TEMPS, id,
+					   0, &temp_count);
+		if (ret)
+			return ret;
+
+		for (j = 0; j < temp_count; j++) {
+			ret = awcc_get_fan_sensors(wdev, AWCC_OP_GET_FAN_TEMP_ID,
+						   id, j, &temp_id);
+			if (ret)
+				break;
+
+			temp_id = FIELD_GET(AWCC_RESOURCE_ID_MASK, temp_id);
+			__set_bit(temp_id, fan_temps);
+		}
+
+		label = awcc_get_fan_label(&wdev->dev, temp_count, temp_id);
+		if (!label)
+			return -ENOMEM;
+
+		fan_data->id = id;
+		fan_data->min_rpm = min_rpm;
+		fan_data->max_rpm = max_rpm;
+		fan_data->label = label;
+		bitmap_gather(gather, fan_temps, priv->temp_sensors, AWCC_ID_BITMAP_SIZE);
+		bitmap_copy(&fan_data->auto_channels_temp, gather, BITS_PER_LONG);
+		priv->fan_data[i] = fan_data;
+
+		bitmap_zero(fan_temps, AWCC_ID_BITMAP_SIZE);
+	}
+
+	return 0;
+}
+
+static int awcc_hwmon_init(struct wmi_device *wdev)
+{
+	struct awcc_priv *priv = dev_get_drvdata(&wdev->dev);
+	int ret;
+
+	priv->fan_data = devm_kcalloc(&wdev->dev, priv->fan_count,
+				      sizeof(*priv->fan_data), GFP_KERNEL);
+	if (!priv->fan_data)
+		return -ENOMEM;
+
+	ret = awcc_hwmon_temps_init(wdev);
+	if (ret)
+		return ret;
+
+	ret = awcc_hwmon_fans_init(wdev);
+	if (ret)
+		return ret;
+
+	priv->hwdev = devm_hwmon_device_register_with_info(&wdev->dev, "alienware_wmi", priv,
+							   &awcc_hwmon_chip_info, NULL);
+
+	return PTR_ERR_OR_ZERO(priv->hwdev);
+}
+
 /*
  * Thermal Profile control
  *  - Provides thermal profile control through the Platform Profile API
@@ -744,6 +1127,12 @@ static int alienware_awcc_setup(struct wmi_device *wdev)
 	priv->wdev = wdev;
 	dev_set_drvdata(&wdev->dev, priv);
 
+	if (awcc->hwmon) {
+		ret = awcc_hwmon_init(wdev);
+		if (ret)
+			return ret;
+	}
+
 	if (awcc->pprof) {
 		ret = awcc_platform_profile_init(wdev);
 		if (ret)
@@ -824,6 +1213,13 @@ int __init alienware_wmax_wmi_init(void)
 	if (id)
 		awcc = id->driver_data;
 
+	if (force_hwmon) {
+		if (!awcc)
+			awcc = &empty_quirks;
+
+		awcc->hwmon = true;
+	}
+
 	if (force_platform_profile) {
 		if (!awcc)
 			awcc = &empty_quirks;

-- 
2.48.1

[PATCH v6 08/12] platform/x86: alienware-wmi-wmax: Add support for manual fan control

[Kurt Borja]

All models with the "AWCC" WMAX device support a way of manually
controlling fans.

The PWM duty cycle of a fan can't be controlled directly. Instead the
AWCC interface let's us tune a fan `boost` value, which has the
following empirically discovered, aproximate behavior over the PWM
value:

	pwm = pwm_base + (fan_boost / 255) * (pwm_max - pwm_base)

Where the pwm_base is the locked PWM value controlled by the FW and
fan_boost is a value between 0 and 255.

Expose this fan_boost knob as a custom HWMON attribute.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi-wmax.c | 174 ++++++++++++++++++++++++-
 1 file changed, 172 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
index 0c30ffb6091a15d81f4dc959dfd28417249d3dda..823b579260555085ef6ac793b806738a756bb9da 100644
--- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
+++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
@@ -13,8 +13,12 @@
 #include <linux/bits.h>
 #include <linux/dmi.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/kstrtox.h>
+#include <linux/minmax.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_profile.h>
+#include <linux/pm.h>
 #include <linux/units.h>
 #include <linux/wmi.h>
 #include "alienware-wmi.h"
@@ -181,10 +185,12 @@ enum AWCC_THERMAL_INFORMATION_OPERATIONS {
 	AWCC_OP_GET_FAN_MIN_RPM			= 0x08,
 	AWCC_OP_GET_FAN_MAX_RPM			= 0x09,
 	AWCC_OP_GET_CURRENT_PROFILE		= 0x0B,
+	AWCC_OP_GET_FAN_BOOST			= 0x0C,
 };
 
 enum AWCC_THERMAL_CONTROL_OPERATIONS {
 	AWCC_OP_ACTIVATE_PROFILE		= 0x01,
+	AWCC_OP_SET_FAN_BOOST			= 0x02,
 };
 
 enum AWCC_GAME_SHIFT_STATUS_OPERATIONS {
@@ -248,6 +254,7 @@ struct awcc_fan_data {
 	const char *label;
 	u32 min_rpm;
 	u32 max_rpm;
+	u8 suspend_cache;
 	u8 id;
 };
 
@@ -628,6 +635,18 @@ static inline int awcc_op_get_temperature(struct wmi_device *wdev, u8 temp_id, u
 	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
 }
 
+static inline int awcc_op_get_fan_boost(struct wmi_device *wdev, u8 fan_id, u32 *out)
+{
+	struct wmax_u32_args args = {
+		.operation = AWCC_OP_GET_FAN_BOOST,
+		.arg1 = fan_id,
+		.arg2 = 0,
+		.arg3 = 0,
+	};
+
+	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
+}
+
 static inline int awcc_op_get_current_profile(struct wmi_device *wdev, u32 *out)
 {
 	struct wmax_u32_args args = {
@@ -653,6 +672,19 @@ static inline int awcc_op_activate_profile(struct wmi_device *wdev, u8 profile)
 	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_CONTROL, &args, &out);
 }
 
+static inline int awcc_op_set_fan_boost(struct wmi_device *wdev, u8 fan_id, u8 boost)
+{
+	struct wmax_u32_args args = {
+		.operation = AWCC_OP_SET_FAN_BOOST,
+		.arg1 = fan_id,
+		.arg2 = boost,
+		.arg3 = 0,
+	};
+	u32 out;
+
+	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_CONTROL, &args, &out);
+}
+
 /*
  * HWMON
  *  - Provides temperature and fan speed monitoring as well as manual fan
@@ -817,6 +849,81 @@ static const struct hwmon_chip_info awcc_hwmon_chip_info = {
 	.info = awcc_hwmon_info,
 };
 
+static ssize_t fan_boost_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct awcc_priv *priv = dev_get_drvdata(dev);
+	int index = to_sensor_dev_attr(attr)->index;
+	struct awcc_fan_data *fan = priv->fan_data[index];
+	u32 boost;
+	int ret;
+
+	ret = awcc_op_get_fan_boost(priv->wdev, fan->id, &boost);
+	if (ret)
+		return ret;
+
+	return sysfs_emit(buf, "%u\n", boost);
+}
+
+static ssize_t fan_boost_store(struct device *dev, struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct awcc_priv *priv = dev_get_drvdata(dev);
+	int index = to_sensor_dev_attr(attr)->index;
+	struct awcc_fan_data *fan = priv->fan_data[index];
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	ret = awcc_op_set_fan_boost(priv->wdev, fan->id, clamp_val(val, 0, 255));
+
+	return ret ? ret : count;
+}
+
+static SENSOR_DEVICE_ATTR_RW(fan1_boost, fan_boost, 0);
+static SENSOR_DEVICE_ATTR_RW(fan2_boost, fan_boost, 1);
+static SENSOR_DEVICE_ATTR_RW(fan3_boost, fan_boost, 2);
+static SENSOR_DEVICE_ATTR_RW(fan4_boost, fan_boost, 3);
+static SENSOR_DEVICE_ATTR_RW(fan5_boost, fan_boost, 4);
+static SENSOR_DEVICE_ATTR_RW(fan6_boost, fan_boost, 5);
+
+static umode_t fan_boost_attr_visible(struct kobject *kobj, struct attribute *attr, int n)
+{
+	struct awcc_priv *priv = dev_get_drvdata(kobj_to_dev(kobj));
+
+	return n < priv->fan_count ? attr->mode : 0;
+}
+
+static bool fan_boost_group_visible(struct kobject *kobj)
+{
+	return true;
+}
+
+DEFINE_SYSFS_GROUP_VISIBLE(fan_boost);
+
+static struct attribute *fan_boost_attrs[] = {
+	&sensor_dev_attr_fan1_boost.dev_attr.attr,
+	&sensor_dev_attr_fan2_boost.dev_attr.attr,
+	&sensor_dev_attr_fan3_boost.dev_attr.attr,
+	&sensor_dev_attr_fan4_boost.dev_attr.attr,
+	&sensor_dev_attr_fan5_boost.dev_attr.attr,
+	&sensor_dev_attr_fan6_boost.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group fan_boost_group = {
+	.attrs = fan_boost_attrs,
+	.is_visible = SYSFS_GROUP_VISIBLE(fan_boost),
+};
+
+static const struct attribute_group *awcc_hwmon_groups[] = {
+	&fan_boost_group,
+	NULL
+};
+
 static int awcc_hwmon_temps_init(struct wmi_device *wdev)
 {
 	struct awcc_priv *priv = dev_get_drvdata(&wdev->dev);
@@ -954,12 +1061,56 @@ static int awcc_hwmon_init(struct wmi_device *wdev)
 	if (ret)
 		return ret;
 
-	priv->hwdev = devm_hwmon_device_register_with_info(&wdev->dev, "alienware_wmi", priv,
-							   &awcc_hwmon_chip_info, NULL);
+	priv->hwdev = devm_hwmon_device_register_with_info(&wdev->dev, "alienware_wmi",
+							   priv, &awcc_hwmon_chip_info,
+							   awcc_hwmon_groups);
 
 	return PTR_ERR_OR_ZERO(priv->hwdev);
 }
 
+static void awcc_hwmon_suspend(struct device *dev)
+{
+	struct awcc_priv *priv = dev_get_drvdata(dev);
+	struct awcc_fan_data *fan;
+	unsigned int i;
+	u32 boost;
+	int ret;
+
+	for (i = 0; i < priv->fan_count; i++) {
+		fan = priv->fan_data[i];
+
+		ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_FAN_BOOST,
+					       fan->id, &boost);
+		if (ret)
+			dev_err(dev, "Failed to store Fan %u boost while suspending\n", i);
+
+		fan->suspend_cache = ret ? 0 : clamp_val(boost, 0, 255);
+
+		awcc_op_set_fan_boost(priv->wdev, fan->id, 0);
+		if (ret)
+			dev_err(dev, "Failed to set Fan %u boost to 0 while suspending\n", i);
+	}
+}
+
+static void awcc_hwmon_resume(struct device *dev)
+{
+	struct awcc_priv *priv = dev_get_drvdata(dev);
+	struct awcc_fan_data *fan;
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < priv->fan_count; i++) {
+		fan = priv->fan_data[i];
+
+		if (!fan->suspend_cache)
+			continue;
+
+		ret = awcc_op_set_fan_boost(priv->wdev, fan->id, fan->suspend_cache);
+		if (ret)
+			dev_err(dev, "Failed to restore Fan %u boost while resuming\n", i);
+	}
+}
+
 /*
  * Thermal Profile control
  *  - Provides thermal profile control through the Platform Profile API
@@ -1189,6 +1340,24 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
 	return ret;
 }
 
+static int wmax_wmi_suspend(struct device *dev)
+{
+	if (awcc->hwmon)
+		awcc_hwmon_suspend(dev);
+
+	return 0;
+}
+
+static int wmax_wmi_resume(struct device *dev)
+{
+	if (awcc->hwmon)
+		awcc_hwmon_resume(dev);
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(wmax_wmi_pm_ops, wmax_wmi_suspend, wmax_wmi_resume);
+
 static const struct wmi_device_id alienware_wmax_device_id_table[] = {
 	{ WMAX_CONTROL_GUID, NULL },
 	{ },
@@ -1199,6 +1368,7 @@ static struct wmi_driver alienware_wmax_wmi_driver = {
 	.driver = {
 		.name = "alienware-wmi-wmax",
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.pm = pm_sleep_ptr(&wmax_wmi_pm_ops),
 	},
 	.id_table = alienware_wmax_device_id_table,
 	.probe = wmax_wmi_probe,

-- 
2.48.1

Re: [PATCH v6 08/12] platform/x86: alienware-wmi-wmax: Add support for manual fan control

[Ilpo Järvinen]

On Thu, 13 Mar 2025, Kurt Borja wrote:

> All models with the "AWCC" WMAX device support a way of manually
> controlling fans.
> 
> The PWM duty cycle of a fan can't be controlled directly. Instead the
> AWCC interface let's us tune a fan `boost` value, which has the
> following empirically discovered, aproximate behavior over the PWM

approximate

> value:
> 
> 	pwm = pwm_base + (fan_boost / 255) * (pwm_max - pwm_base)
> 
> Where the pwm_base is the locked PWM value controlled by the FW and
> fan_boost is a value between 0 and 255.
> 
> Expose this fan_boost knob as a custom HWMON attribute.
> 
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Jean Delvare <jdelvare@suse.com>
> Cc: linux-hwmon@vger.kernel.org
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
> ---
>  drivers/platform/x86/dell/alienware-wmi-wmax.c | 174 ++++++++++++++++++++++++-
>  1 file changed, 172 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> index 0c30ffb6091a15d81f4dc959dfd28417249d3dda..823b579260555085ef6ac793b806738a756bb9da 100644
> --- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
> +++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> @@ -13,8 +13,12 @@
>  #include <linux/bits.h>
>  #include <linux/dmi.h>
>  #include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/kstrtox.h>
> +#include <linux/minmax.h>
>  #include <linux/moduleparam.h>
>  #include <linux/platform_profile.h>
> +#include <linux/pm.h>
>  #include <linux/units.h>
>  #include <linux/wmi.h>
>  #include "alienware-wmi.h"
> @@ -181,10 +185,12 @@ enum AWCC_THERMAL_INFORMATION_OPERATIONS {
>  	AWCC_OP_GET_FAN_MIN_RPM			= 0x08,
>  	AWCC_OP_GET_FAN_MAX_RPM			= 0x09,
>  	AWCC_OP_GET_CURRENT_PROFILE		= 0x0B,
> +	AWCC_OP_GET_FAN_BOOST			= 0x0C,
>  };
>  
>  enum AWCC_THERMAL_CONTROL_OPERATIONS {
>  	AWCC_OP_ACTIVATE_PROFILE		= 0x01,
> +	AWCC_OP_SET_FAN_BOOST			= 0x02,
>  };
>  
>  enum AWCC_GAME_SHIFT_STATUS_OPERATIONS {
> @@ -248,6 +254,7 @@ struct awcc_fan_data {
>  	const char *label;
>  	u32 min_rpm;
>  	u32 max_rpm;
> +	u8 suspend_cache;
>  	u8 id;
>  };
>  
> @@ -628,6 +635,18 @@ static inline int awcc_op_get_temperature(struct wmi_device *wdev, u8 temp_id, u
>  	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
>  }
>  
> +static inline int awcc_op_get_fan_boost(struct wmi_device *wdev, u8 fan_id, u32 *out)
> +{
> +	struct wmax_u32_args args = {
> +		.operation = AWCC_OP_GET_FAN_BOOST,
> +		.arg1 = fan_id,
> +		.arg2 = 0,
> +		.arg3 = 0,
> +	};
> +
> +	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
> +}
> +
>  static inline int awcc_op_get_current_profile(struct wmi_device *wdev, u32 *out)
>  {
>  	struct wmax_u32_args args = {
> @@ -653,6 +672,19 @@ static inline int awcc_op_activate_profile(struct wmi_device *wdev, u8 profile)
>  	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_CONTROL, &args, &out);
>  }
>  
> +static inline int awcc_op_set_fan_boost(struct wmi_device *wdev, u8 fan_id, u8 boost)
> +{
> +	struct wmax_u32_args args = {
> +		.operation = AWCC_OP_SET_FAN_BOOST,
> +		.arg1 = fan_id,
> +		.arg2 = boost,
> +		.arg3 = 0,
> +	};
> +	u32 out;
> +
> +	return __awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_CONTROL, &args, &out);
> +}
> +
>  /*
>   * HWMON
>   *  - Provides temperature and fan speed monitoring as well as manual fan
> @@ -817,6 +849,81 @@ static const struct hwmon_chip_info awcc_hwmon_chip_info = {
>  	.info = awcc_hwmon_info,
>  };
>  
> +static ssize_t fan_boost_show(struct device *dev, struct device_attribute *attr,
> +			      char *buf)
> +{
> +	struct awcc_priv *priv = dev_get_drvdata(dev);
> +	int index = to_sensor_dev_attr(attr)->index;
> +	struct awcc_fan_data *fan = priv->fan_data[index];
> +	u32 boost;
> +	int ret;
> +
> +	ret = awcc_op_get_fan_boost(priv->wdev, fan->id, &boost);
> +	if (ret)
> +		return ret;
> +
> +	return sysfs_emit(buf, "%u\n", boost);
> +}
> +
> +static ssize_t fan_boost_store(struct device *dev, struct device_attribute *attr,
> +			       const char *buf, size_t count)
> +{
> +	struct awcc_priv *priv = dev_get_drvdata(dev);
> +	int index = to_sensor_dev_attr(attr)->index;
> +	struct awcc_fan_data *fan = priv->fan_data[index];
> +	unsigned long val;
> +	int ret;
> +
> +	ret = kstrtoul(buf, 0, &val);
> +	if (ret)
> +		return ret;
> +
> +	ret = awcc_op_set_fan_boost(priv->wdev, fan->id, clamp_val(val, 0, 255));
> +
> +	return ret ? ret : count;
> +}
> +
> +static SENSOR_DEVICE_ATTR_RW(fan1_boost, fan_boost, 0);
> +static SENSOR_DEVICE_ATTR_RW(fan2_boost, fan_boost, 1);
> +static SENSOR_DEVICE_ATTR_RW(fan3_boost, fan_boost, 2);
> +static SENSOR_DEVICE_ATTR_RW(fan4_boost, fan_boost, 3);
> +static SENSOR_DEVICE_ATTR_RW(fan5_boost, fan_boost, 4);
> +static SENSOR_DEVICE_ATTR_RW(fan6_boost, fan_boost, 5);
> +
> +static umode_t fan_boost_attr_visible(struct kobject *kobj, struct attribute *attr, int n)
> +{
> +	struct awcc_priv *priv = dev_get_drvdata(kobj_to_dev(kobj));
> +
> +	return n < priv->fan_count ? attr->mode : 0;
> +}
> +
> +static bool fan_boost_group_visible(struct kobject *kobj)
> +{
> +	return true;
> +}
> +
> +DEFINE_SYSFS_GROUP_VISIBLE(fan_boost);
> +
> +static struct attribute *fan_boost_attrs[] = {
> +	&sensor_dev_attr_fan1_boost.dev_attr.attr,
> +	&sensor_dev_attr_fan2_boost.dev_attr.attr,
> +	&sensor_dev_attr_fan3_boost.dev_attr.attr,
> +	&sensor_dev_attr_fan4_boost.dev_attr.attr,
> +	&sensor_dev_attr_fan5_boost.dev_attr.attr,
> +	&sensor_dev_attr_fan6_boost.dev_attr.attr,
> +	NULL
> +};
> +
> +static const struct attribute_group fan_boost_group = {
> +	.attrs = fan_boost_attrs,
> +	.is_visible = SYSFS_GROUP_VISIBLE(fan_boost),
> +};
> +
> +static const struct attribute_group *awcc_hwmon_groups[] = {
> +	&fan_boost_group,
> +	NULL
> +};
> +
>  static int awcc_hwmon_temps_init(struct wmi_device *wdev)
>  {
>  	struct awcc_priv *priv = dev_get_drvdata(&wdev->dev);
> @@ -954,12 +1061,56 @@ static int awcc_hwmon_init(struct wmi_device *wdev)
>  	if (ret)
>  		return ret;
>  
> -	priv->hwdev = devm_hwmon_device_register_with_info(&wdev->dev, "alienware_wmi", priv,
> -							   &awcc_hwmon_chip_info, NULL);
> +	priv->hwdev = devm_hwmon_device_register_with_info(&wdev->dev, "alienware_wmi",
> +							   priv, &awcc_hwmon_chip_info,
> +							   awcc_hwmon_groups);
>  
>  	return PTR_ERR_OR_ZERO(priv->hwdev);
>  }
>  
> +static void awcc_hwmon_suspend(struct device *dev)
> +{
> +	struct awcc_priv *priv = dev_get_drvdata(dev);
> +	struct awcc_fan_data *fan;
> +	unsigned int i;
> +	u32 boost;
> +	int ret;
> +
> +	for (i = 0; i < priv->fan_count; i++) {
> +		fan = priv->fan_data[i];
> +
> +		ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_FAN_BOOST,
> +					       fan->id, &boost);
> +		if (ret)
> +			dev_err(dev, "Failed to store Fan %u boost while suspending\n", i);
> +
> +		fan->suspend_cache = ret ? 0 : clamp_val(boost, 0, 255);
> +
> +		awcc_op_set_fan_boost(priv->wdev, fan->id, 0);
> +		if (ret)
> +			dev_err(dev, "Failed to set Fan %u boost to 0 while suspending\n", i);
> +	}
> +}
> +
> +static void awcc_hwmon_resume(struct device *dev)
> +{
> +	struct awcc_priv *priv = dev_get_drvdata(dev);
> +	struct awcc_fan_data *fan;
> +	unsigned int i;
> +	int ret;
> +
> +	for (i = 0; i < priv->fan_count; i++) {
> +		fan = priv->fan_data[i];
> +
> +		if (!fan->suspend_cache)
> +			continue;
> +
> +		ret = awcc_op_set_fan_boost(priv->wdev, fan->id, fan->suspend_cache);
> +		if (ret)
> +			dev_err(dev, "Failed to restore Fan %u boost while resuming\n", i);
> +	}
> +}
> +
>  /*
>   * Thermal Profile control
>   *  - Provides thermal profile control through the Platform Profile API
> @@ -1189,6 +1340,24 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
>  	return ret;
>  }
>  
> +static int wmax_wmi_suspend(struct device *dev)
> +{
> +	if (awcc->hwmon)
> +		awcc_hwmon_suspend(dev);
> +
> +	return 0;
> +}
> +
> +static int wmax_wmi_resume(struct device *dev)
> +{
> +	if (awcc->hwmon)
> +		awcc_hwmon_resume(dev);
> +
> +	return 0;
> +}
> +
> +static DEFINE_SIMPLE_DEV_PM_OPS(wmax_wmi_pm_ops, wmax_wmi_suspend, wmax_wmi_resume);
> +
>  static const struct wmi_device_id alienware_wmax_device_id_table[] = {
>  	{ WMAX_CONTROL_GUID, NULL },
>  	{ },
> @@ -1199,6 +1368,7 @@ static struct wmi_driver alienware_wmax_wmi_driver = {
>  	.driver = {
>  		.name = "alienware-wmi-wmax",
>  		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
> +		.pm = pm_sleep_ptr(&wmax_wmi_pm_ops),
>  	},
>  	.id_table = alienware_wmax_device_id_table,
>  	.probe = wmax_wmi_probe,
> 
> 

-- 
 i.

[PATCH v6 09/12] platform/x86: alienware-wmi-wmax: Add a DebugFS interface

[Kurt Borja]

Add a debugfs interface which exposes thermal private data.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/platform/x86/dell/alienware-wmi-wmax.c | 90 ++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)

diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
index 823b579260555085ef6ac793b806738a756bb9da..472e6289fec5be0db0a5cb8e76718b750fa558b5 100644
--- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
+++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
@@ -11,6 +11,7 @@
 #include <linux/bitfield.h>
 #include <linux/bitmap.h>
 #include <linux/bits.h>
+#include <linux/debugfs.h>
 #include <linux/dmi.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
@@ -19,6 +20,7 @@
 #include <linux/moduleparam.h>
 #include <linux/platform_profile.h>
 #include <linux/pm.h>
+#include <linux/seq_file.h>
 #include <linux/units.h>
 #include <linux/wmi.h>
 #include "alienware-wmi.h"
@@ -1252,6 +1254,92 @@ static int awcc_platform_profile_init(struct wmi_device *wdev)
 	return PTR_ERR_OR_ZERO(priv->ppdev);
 }
 
+/*
+ * DebugFS
+ */
+static int awcc_debugfs_system_description_read(struct seq_file *seq, void *data)
+{
+	struct device *dev = seq->private;
+	struct awcc_priv *priv = dev_get_drvdata(dev);
+
+	seq_printf(seq, "0x%08x\n", priv->system_description);
+
+	return 0;
+}
+
+static int awcc_debugfs_hwmon_data_read(struct seq_file *seq, void *data)
+{
+	struct device *dev = seq->private;
+	struct awcc_priv *priv = dev_get_drvdata(dev);
+	const struct awcc_fan_data *fan;
+	unsigned int bit;
+
+	seq_printf(seq, "Number of fans: %u\n", priv->fan_count);
+	seq_printf(seq, "Number of temperature sensors: %u\n\n", priv->temp_count);
+
+	for (u32 i = 0; i < priv->fan_count; i++) {
+		fan = priv->fan_data[i];
+
+		seq_printf(seq, "Fan %u:\n", i);
+		seq_printf(seq, "  ID: 0x%02x\n", fan->id);
+		seq_printf(seq, "  Related temperature sensors bitmap: %lu\n",
+			   fan->auto_channels_temp);
+	}
+
+	seq_puts(seq, "\nTemperature sensor IDs:\n");
+	for_each_set_bit(bit, priv->temp_sensors, AWCC_ID_BITMAP_SIZE)
+		seq_printf(seq, "  0x%02x\n", bit);
+
+	return 0;
+}
+
+static int awcc_debugfs_pprof_data_read(struct seq_file *seq, void *data)
+{
+	struct device *dev = seq->private;
+	struct awcc_priv *priv = dev_get_drvdata(dev);
+
+	seq_printf(seq, "Number of thermal profiles: %u\n\n", priv->profile_count);
+
+	for (u32 i = 0; i < PLATFORM_PROFILE_LAST; i++) {
+		if (!priv->supported_profiles[i])
+			continue;
+
+		seq_printf(seq, "Platform profile %u:\n", i);
+		seq_printf(seq, "  ID: 0x%02x\n", priv->supported_profiles[i]);
+	}
+
+	return 0;
+}
+
+static void awcc_debugfs_remove(void *data)
+{
+	struct dentry *root = data;
+
+	debugfs_remove(root);
+}
+
+static void awcc_debugfs_init(struct wmi_device *wdev)
+{
+	struct dentry *root;
+	char name[64];
+
+	scnprintf(name, ARRAY_SIZE(name), "%s-%s", "alienware-wmi", dev_name(&wdev->dev));
+	root = debugfs_create_dir(name, NULL);
+
+	debugfs_create_devm_seqfile(&wdev->dev, "system_description", root,
+				    awcc_debugfs_system_description_read);
+
+	if (awcc->hwmon)
+		debugfs_create_devm_seqfile(&wdev->dev, "hwmon_data", root,
+					    awcc_debugfs_hwmon_data_read);
+
+	if (awcc->pprof)
+		debugfs_create_devm_seqfile(&wdev->dev, "pprof_data", root,
+					    awcc_debugfs_pprof_data_read);
+
+	devm_add_action_or_reset(&wdev->dev, awcc_debugfs_remove, root);
+}
+
 static int alienware_awcc_setup(struct wmi_device *wdev)
 {
 	struct awcc_priv *priv;
@@ -1290,6 +1378,8 @@ static int alienware_awcc_setup(struct wmi_device *wdev)
 			return ret;
 	}
 
+	awcc_debugfs_init(wdev);
+
 	return 0;
 }
 

-- 
2.48.1

Re: [PATCH v6 09/12] platform/x86: alienware-wmi-wmax: Add a DebugFS interface

[Ilpo Järvinen]

On Thu, 13 Mar 2025, Kurt Borja wrote:

> Add a debugfs interface which exposes thermal private data.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
> ---
>  drivers/platform/x86/dell/alienware-wmi-wmax.c | 90 ++++++++++++++++++++++++++
>  1 file changed, 90 insertions(+)
> 
> diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> index 823b579260555085ef6ac793b806738a756bb9da..472e6289fec5be0db0a5cb8e76718b750fa558b5 100644
> --- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
> +++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> @@ -11,6 +11,7 @@
>  #include <linux/bitfield.h>
>  #include <linux/bitmap.h>
>  #include <linux/bits.h>
> +#include <linux/debugfs.h>
>  #include <linux/dmi.h>
>  #include <linux/hwmon.h>
>  #include <linux/hwmon-sysfs.h>
> @@ -19,6 +20,7 @@
>  #include <linux/moduleparam.h>
>  #include <linux/platform_profile.h>
>  #include <linux/pm.h>
> +#include <linux/seq_file.h>
>  #include <linux/units.h>
>  #include <linux/wmi.h>
>  #include "alienware-wmi.h"
> @@ -1252,6 +1254,92 @@ static int awcc_platform_profile_init(struct wmi_device *wdev)
>  	return PTR_ERR_OR_ZERO(priv->ppdev);
>  }
>  
> +/*
> + * DebugFS
> + */
> +static int awcc_debugfs_system_description_read(struct seq_file *seq, void *data)
> +{
> +	struct device *dev = seq->private;
> +	struct awcc_priv *priv = dev_get_drvdata(dev);
> +
> +	seq_printf(seq, "0x%08x\n", priv->system_description);
> +
> +	return 0;
> +}
> +
> +static int awcc_debugfs_hwmon_data_read(struct seq_file *seq, void *data)
> +{
> +	struct device *dev = seq->private;
> +	struct awcc_priv *priv = dev_get_drvdata(dev);
> +	const struct awcc_fan_data *fan;
> +	unsigned int bit;
> +
> +	seq_printf(seq, "Number of fans: %u\n", priv->fan_count);
> +	seq_printf(seq, "Number of temperature sensors: %u\n\n", priv->temp_count);
> +
> +	for (u32 i = 0; i < priv->fan_count; i++) {
> +		fan = priv->fan_data[i];
> +
> +		seq_printf(seq, "Fan %u:\n", i);
> +		seq_printf(seq, "  ID: 0x%02x\n", fan->id);
> +		seq_printf(seq, "  Related temperature sensors bitmap: %lu\n",
> +			   fan->auto_channels_temp);
> +	}
> +
> +	seq_puts(seq, "\nTemperature sensor IDs:\n");
> +	for_each_set_bit(bit, priv->temp_sensors, AWCC_ID_BITMAP_SIZE)
> +		seq_printf(seq, "  0x%02x\n", bit);
> +
> +	return 0;
> +}
> +
> +static int awcc_debugfs_pprof_data_read(struct seq_file *seq, void *data)
> +{
> +	struct device *dev = seq->private;
> +	struct awcc_priv *priv = dev_get_drvdata(dev);
> +
> +	seq_printf(seq, "Number of thermal profiles: %u\n\n", priv->profile_count);
> +
> +	for (u32 i = 0; i < PLATFORM_PROFILE_LAST; i++) {
> +		if (!priv->supported_profiles[i])
> +			continue;
> +
> +		seq_printf(seq, "Platform profile %u:\n", i);
> +		seq_printf(seq, "  ID: 0x%02x\n", priv->supported_profiles[i]);
> +	}
> +
> +	return 0;
> +}
> +
> +static void awcc_debugfs_remove(void *data)
> +{
> +	struct dentry *root = data;
> +
> +	debugfs_remove(root);
> +}
> +
> +static void awcc_debugfs_init(struct wmi_device *wdev)
> +{
> +	struct dentry *root;
> +	char name[64];
> +
> +	scnprintf(name, ARRAY_SIZE(name), "%s-%s", "alienware-wmi", dev_name(&wdev->dev));

You'd need to add include for ARRAY_SIZE() but can't you just use 
sizeof()?

> +	root = debugfs_create_dir(name, NULL);
> +
> +	debugfs_create_devm_seqfile(&wdev->dev, "system_description", root,
> +				    awcc_debugfs_system_description_read);
> +
> +	if (awcc->hwmon)
> +		debugfs_create_devm_seqfile(&wdev->dev, "hwmon_data", root,
> +					    awcc_debugfs_hwmon_data_read);
> +
> +	if (awcc->pprof)
> +		debugfs_create_devm_seqfile(&wdev->dev, "pprof_data", root,
> +					    awcc_debugfs_pprof_data_read);
> +
> +	devm_add_action_or_reset(&wdev->dev, awcc_debugfs_remove, root);
> +}
> +
>  static int alienware_awcc_setup(struct wmi_device *wdev)
>  {
>  	struct awcc_priv *priv;
> @@ -1290,6 +1378,8 @@ static int alienware_awcc_setup(struct wmi_device *wdev)
>  			return ret;
>  	}
>  
> +	awcc_debugfs_init(wdev);
> +
>  	return 0;
>  }
>  
> 
> 

-- 
 i.

Re: [PATCH v6 09/12] platform/x86: alienware-wmi-wmax: Add a DebugFS interface

[Kurt Borja]

On Fri Mar 28, 2025 at 1:18 PM -03, Ilpo Järvinen wrote:
> On Thu, 13 Mar 2025, Kurt Borja wrote:
>
>> Add a debugfs interface which exposes thermal private data.
>> 
>> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
>> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
>> ---
>>  drivers/platform/x86/dell/alienware-wmi-wmax.c | 90 ++++++++++++++++++++++++++
>>  1 file changed, 90 insertions(+)
>> 
>> diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
>> index 823b579260555085ef6ac793b806738a756bb9da..472e6289fec5be0db0a5cb8e76718b750fa558b5 100644
>> --- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
>> +++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
>> @@ -11,6 +11,7 @@
>>  #include <linux/bitfield.h>
>>  #include <linux/bitmap.h>
>>  #include <linux/bits.h>
>> +#include <linux/debugfs.h>
>>  #include <linux/dmi.h>
>>  #include <linux/hwmon.h>
>>  #include <linux/hwmon-sysfs.h>
>> @@ -19,6 +20,7 @@
>>  #include <linux/moduleparam.h>
>>  #include <linux/platform_profile.h>
>>  #include <linux/pm.h>
>> +#include <linux/seq_file.h>
>>  #include <linux/units.h>
>>  #include <linux/wmi.h>
>>  #include "alienware-wmi.h"
>> @@ -1252,6 +1254,92 @@ static int awcc_platform_profile_init(struct wmi_device *wdev)
>>  	return PTR_ERR_OR_ZERO(priv->ppdev);
>>  }
>>  
>> +/*
>> + * DebugFS
>> + */
>> +static int awcc_debugfs_system_description_read(struct seq_file *seq, void *data)
>> +{
>> +	struct device *dev = seq->private;
>> +	struct awcc_priv *priv = dev_get_drvdata(dev);
>> +
>> +	seq_printf(seq, "0x%08x\n", priv->system_description);
>> +
>> +	return 0;
>> +}
>> +
>> +static int awcc_debugfs_hwmon_data_read(struct seq_file *seq, void *data)
>> +{
>> +	struct device *dev = seq->private;
>> +	struct awcc_priv *priv = dev_get_drvdata(dev);
>> +	const struct awcc_fan_data *fan;
>> +	unsigned int bit;
>> +
>> +	seq_printf(seq, "Number of fans: %u\n", priv->fan_count);
>> +	seq_printf(seq, "Number of temperature sensors: %u\n\n", priv->temp_count);
>> +
>> +	for (u32 i = 0; i < priv->fan_count; i++) {
>> +		fan = priv->fan_data[i];
>> +
>> +		seq_printf(seq, "Fan %u:\n", i);
>> +		seq_printf(seq, "  ID: 0x%02x\n", fan->id);
>> +		seq_printf(seq, "  Related temperature sensors bitmap: %lu\n",
>> +			   fan->auto_channels_temp);
>> +	}
>> +
>> +	seq_puts(seq, "\nTemperature sensor IDs:\n");
>> +	for_each_set_bit(bit, priv->temp_sensors, AWCC_ID_BITMAP_SIZE)
>> +		seq_printf(seq, "  0x%02x\n", bit);
>> +
>> +	return 0;
>> +}
>> +
>> +static int awcc_debugfs_pprof_data_read(struct seq_file *seq, void *data)
>> +{
>> +	struct device *dev = seq->private;
>> +	struct awcc_priv *priv = dev_get_drvdata(dev);
>> +
>> +	seq_printf(seq, "Number of thermal profiles: %u\n\n", priv->profile_count);
>> +
>> +	for (u32 i = 0; i < PLATFORM_PROFILE_LAST; i++) {
>> +		if (!priv->supported_profiles[i])
>> +			continue;
>> +
>> +		seq_printf(seq, "Platform profile %u:\n", i);
>> +		seq_printf(seq, "  ID: 0x%02x\n", priv->supported_profiles[i]);
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static void awcc_debugfs_remove(void *data)
>> +{
>> +	struct dentry *root = data;
>> +
>> +	debugfs_remove(root);
>> +}
>> +
>> +static void awcc_debugfs_init(struct wmi_device *wdev)
>> +{
>> +	struct dentry *root;
>> +	char name[64];
>> +
>> +	scnprintf(name, ARRAY_SIZE(name), "%s-%s", "alienware-wmi", dev_name(&wdev->dev));
>
> You'd need to add include for ARRAY_SIZE() but can't you just use 
> sizeof()?

Sure, it's 1 byte anyway. Though I think I use ARRAY_SIZE somewhere
else so I'll add the include too.

Thank you so much for your feedback! I'll send v7 this weekend.

-- 
 ~ Kurt

>
>> +	root = debugfs_create_dir(name, NULL);
>> +
>> +	debugfs_create_devm_seqfile(&wdev->dev, "system_description", root,
>> +				    awcc_debugfs_system_description_read);
>> +
>> +	if (awcc->hwmon)
>> +		debugfs_create_devm_seqfile(&wdev->dev, "hwmon_data", root,
>> +					    awcc_debugfs_hwmon_data_read);
>> +
>> +	if (awcc->pprof)
>> +		debugfs_create_devm_seqfile(&wdev->dev, "pprof_data", root,
>> +					    awcc_debugfs_pprof_data_read);
>> +
>> +	devm_add_action_or_reset(&wdev->dev, awcc_debugfs_remove, root);
>> +}
>> +
>>  static int alienware_awcc_setup(struct wmi_device *wdev)
>>  {
>>  	struct awcc_priv *priv;
>> @@ -1290,6 +1378,8 @@ static int alienware_awcc_setup(struct wmi_device *wdev)
>>  			return ret;
>>  	}
>>  
>> +	awcc_debugfs_init(wdev);
>> +
>>  	return 0;
>>  }
>>  
>> 
>> 

[PATCH v6 10/12] Documentation: wmi: Improve and update alienware-wmi documentation

[Kurt Borja]

Use tables to describe method operations instead of using pseudo-code.
Drop unknown method descriptions to avoid redundancy. Drop GPIO section
as it is currently irrelevant to this driver. Update Thermal_Information
method documentation. Add one more helpful developer to the kudos section.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 Documentation/wmi/devices/alienware-wmi.rst | 383 +++++++++-------------------
 1 file changed, 117 insertions(+), 266 deletions(-)

diff --git a/Documentation/wmi/devices/alienware-wmi.rst b/Documentation/wmi/devices/alienware-wmi.rst
index ddc5e561960e05fc7cffe700d7d278e32ff2e7b2..79238051b18bc5de9b502325017cd5c5fcf41748 100644
--- a/Documentation/wmi/devices/alienware-wmi.rst
+++ b/Documentation/wmi/devices/alienware-wmi.rst
@@ -11,7 +11,7 @@ The WMI device WMAX has been implemented for many Alienware and Dell's G-Series
 models. Throughout these models, two implementations have been identified. The
 first one, used by older systems, deals with HDMI, brightness, RGB, amplifier
 and deep sleep control. The second one used by newer systems deals primarily
-with thermal, overclocking, and GPIO control.
+with thermal control and overclocking.
 
 It is suspected that the latter is used by Alienware Command Center (AWCC) to
 manage manufacturer predefined thermal profiles. The alienware-wmi driver
@@ -69,9 +69,6 @@ data using the `bmfdec <https://github.com/pali/bmfdec>`_ utility:
    [WmiMethodId(164), Implemented, read, write, Description("Tobii Camera Power Off.")] void TobiiCameraPowerOff([out] uint32 argr);
  };
 
-Some of these methods get quite intricate so we will describe them using
-pseudo-code that vaguely resembles the original ASL code.
-
 Methods not described in the following document have unknown behavior.
 
 Argument Structure
@@ -87,175 +84,133 @@ ID 0xA0, the argument you would pass to the method is 0xA001.
 Thermal Methods
 ===============
 
+WMI method GetFanSensors([in] uint32 arg2, [out] uint32 argr)
+-------------------------------------------------------------
+
++--------------------+------------------------------------+--------------------+
+| Operation (Byte 0) | Description                        | Arguments          |
++====================+====================================+====================+
+| 0x01               | Get the number of temperature      | - Byte 1: Fan ID   |
+|                    | sensors related with a fan ID      |                    |
++--------------------+------------------------------------+--------------------+
+| 0x02               | Get the temperature sensor IDs     | - Byte 1: Fan ID   |
+|                    | related to a fan sensor ID         | - Byte 2: Index    |
++--------------------+------------------------------------+--------------------+
+
 WMI method Thermal_Information([in] uint32 arg2, [out] uint32 argr)
 -------------------------------------------------------------------
 
-::
-
- if BYTE_0(arg2) == 0x01:
-         argr = 1
-
- if BYTE_0(arg2) == 0x02:
-         argr = SYSTEM_DESCRIPTION
-
- if BYTE_0(arg2) == 0x03:
-         if BYTE_1(arg2) == 0x00:
-                 argr = FAN_ID_0
-
-         if BYTE_1(arg2) == 0x01:
-                 argr = FAN_ID_1
-
-         if BYTE_1(arg2) == 0x02:
-                 argr = FAN_ID_2
-
-         if BYTE_1(arg2) == 0x03:
-                 argr = FAN_ID_3
-
-         if BYTE_1(arg2) == 0x04:
-                 argr = SENSOR_ID_CPU | 0x0100
-
-         if BYTE_1(arg2) == 0x05:
-                 argr = SENSOR_ID_GPU | 0x0100
-
-         if BYTE_1(arg2) == 0x06:
-                 argr = THERMAL_MODE_QUIET_ID
-
-         if BYTE_1(arg2) == 0x07:
-                 argr = THERMAL_MODE_BALANCED_ID
-
-         if BYTE_1(arg2) == 0x08:
-                 argr = THERMAL_MODE_BALANCED_PERFORMANCE_ID
-
-         if BYTE_1(arg2) == 0x09:
-                 argr = THERMAL_MODE_PERFORMANCE_ID
-
-         if BYTE_1(arg2) == 0x0A:
-                 argr = THERMAL_MODE_LOW_POWER_ID
-
-         if BYTE_1(arg2) == 0x0B:
-                 argr = THERMAL_MODE_GMODE_ID
-
-         else:
-                 argr = 0xFFFFFFFF
-
- if BYTE_0(arg2) == 0x04:
-         if is_valid_sensor(BYTE_1(arg2)):
-                 argr = SENSOR_TEMP_C
-         else:
-                 argr = 0xFFFFFFFF
-
- if BYTE_0(arg2) == 0x05:
-         if is_valid_fan(BYTE_1(arg2)):
-                 argr = FAN_RPM()
-
- if BYTE_0(arg2) == 0x06:
-         skip
-
- if BYTE_0(arg2) == 0x07:
-         argr = 0
-
- If BYTE_0(arg2) == 0x08:
-         if is_valid_fan(BYTE_1(arg2)):
-                 argr = 0
-         else:
-                 argr = 0xFFFFFFFF
-
- if BYTE_0(arg2) == 0x09:
-         if is_valid_fan(BYTE_1(arg2)):
-                 argr = FAN_UNKNOWN_STAT_0()
-
-         else:
-                 argr = 0xFFFFFFFF
-
- if BYTE_0(arg2) == 0x0A:
-         argr = THERMAL_MODE_BALANCED_ID
-
- if BYTE_0(arg2) == 0x0B:
-         argr = CURRENT_THERMAL_MODE()
-
- if BYTE_0(arg2) == 0x0C:
-         if is_valid_fan(BYTE_1(arg2)):
-                 argr = FAN_UNKNOWN_STAT_1()
-         else:
-                 argr = 0xFFFFFFFF
-
-Operation 0x02 returns a *system description* buffer with the following
-structure:
-
-::
-
- out[0] -> Number of fans
- out[1] -> Number of sensors
- out[2] -> 0x00
- out[3] -> Number of thermal modes
-
-Operation 0x03 list all available fan IDs, sensor IDs and thermal profile
-codes in order, but different models may have different number of fans and
-thermal profiles. These are the known ranges:
-
-* Fan IDs: from 2 up to 4
-* Sensor IDs: 2
-* Thermal profile codes: from 1 up to 7
-
-In total BYTE_1(ARG2) may range from 0x5 up to 0xD depending on the model.
++--------------------+------------------------------------+--------------------+
+| Operation (Byte 0) | Description                        | Arguments          |
++====================+====================================+====================+
+| 0x01               | Unknown.                           | - None             |
++--------------------+------------------------------------+--------------------+
+| 0x02               | Get system description number with | - None             |
+|                    | the following structure:           |                    |
+|                    |                                    |                    |
+|                    | - Byte 0: Number of fans           |                    |
+|                    | - Byte 1: Number of temperature    |                    |
+|                    |   sensors                          |                    |
+|                    | - Byte 2: Unknown                  |                    |
+|                    | - Byte 3: Number of thermal        |                    |
+|                    |   profiles                         |                    |
++--------------------+------------------------------------+--------------------+
+| 0x03               | List an ID or resource at a given  | - Byte 1: Index    |
+|                    | index. Fan IDs, temperature IDs,   |                    |
+|                    | unknown IDs and thermal profile    |                    |
+|                    | IDs are listed in that exact       |                    |
+|                    | order.                             |                    |
+|                    |                                    |                    |
+|                    | Operation 0x02 is used to know     |                    |
+|                    | which indexes map to which         |                    |
+|                    | resources.                         |                    |
+|                    |                                    |                    |
+|                    | **Returns:** ID at a given index   |                    |
++--------------------+------------------------------------+--------------------+
+| 0x04               | Get the current temperature for a  | - Byte 1: Sensor   |
+|                    | given temperature sensor.          |   ID               |
++--------------------+------------------------------------+--------------------+
+| 0x05               | Get the current RPM for a given    | - Byte 1: Fan ID   |
+|                    | fan.                               |                    |
++--------------------+------------------------------------+--------------------+
+| 0x06               | Get fan speed percentage. (not     | - Byte 1: Fan ID   |
+|                    | implemented in every model)        |                    |
++--------------------+------------------------------------+--------------------+
+| 0x07               | Unknown.                           | - Unknown          |
++--------------------+------------------------------------+--------------------+
+| 0x08               | Get minimum RPM for a given FAN    | - Byte 1: Fan ID   |
+|                    | ID.                                |                    |
++--------------------+------------------------------------+--------------------+
+| 0x09               | Get maximum RPM for a given FAN    | - Byte 1: Fan ID   |
+|                    | ID.                                |                    |
++--------------------+------------------------------------+--------------------+
+| 0x0A               | Get balanced thermal profile ID.   | - None             |
++--------------------+------------------------------------+--------------------+
+| 0x0B               | Get current thermal profile ID.    | - None             |
++--------------------+------------------------------------+--------------------+
+| 0x0C               | Get current `boost` value for a    | - Byte 1: Fan ID   |
+|                    | given fan ID.                      |                    |
++--------------------+------------------------------------+--------------------+
 
 WMI method Thermal_Control([in] uint32 arg2, [out] uint32 argr)
 ---------------------------------------------------------------
 
-::
-
- if BYTE_0(arg2) == 0x01:
-         if is_valid_thermal_profile(BYTE_1(arg2)):
-                 SET_THERMAL_PROFILE(BYTE_1(arg2))
-                 argr = 0
-
- if BYTE_0(arg2) == 0x02:
-         if is_valid_fan(BYTE_1(arg2)):
-                 SET_FAN_SPEED_MULTIPLIER(BYTE_2(arg2))
-                 argr = 0
-         else:
-                 argr = 0xFFFFFFFF
-
-.. note::
-   While you can manually change the fan speed multiplier with this method,
-   Dell's BIOS tends to overwrite this changes anyway.
++--------------------+------------------------------------+--------------------+
+| Operation (Byte 0) | Description                        | Arguments          |
++====================+====================================+====================+
+| 0x01               | Activate a given thermal profile.  | - Byte 1: Thermal  |
+|                    |                                    |   profile ID       |
++--------------------+------------------------------------+--------------------+
+| 0x02               | Set a `boost` value for a given    | - Byte 1: Fan ID   |
+|                    | fan ID.                            | - Byte 2: Boost    |
++--------------------+------------------------------------+--------------------+
 
 These are the known thermal profile codes:
 
-::
++------------------------------+----------+------+
+| Thermal Profile              | Type     | ID   |
++==============================+==========+======+
+| Custom                       | Special  | 0x00 |
++------------------------------+----------+------+
+| G-Mode                       | Special  | 0xAB |
++------------------------------+----------+------+
+| Quiet                        | Legacy   | 0x96 |
++------------------------------+----------+------+
+| Balanced                     | Legacy   | 0x97 |
++------------------------------+----------+------+
+| Balanced Performance         | Legacy   | 0x98 |
++------------------------------+----------+------+
+| Performance                  | Legacy   | 0x99 |
++------------------------------+----------+------+
+| Balanced                     | USTT     | 0xA0 |
++------------------------------+----------+------+
+| Balanced Performance         | USTT     | 0xA1 |
++------------------------------+----------+------+
+| Cool                         | USTT     | 0xA2 |
++------------------------------+----------+------+
+| Quiet                        | USTT     | 0xA3 |
++------------------------------+----------+------+
+| Performance                  | USTT     | 0xA4 |
++------------------------------+----------+------+
+| Low Power                    | USTT     | 0xA5 |
++------------------------------+----------+------+
 
- CUSTOM                         0x00
+If a model supports the User Selectable Thermal Tables (USTT) profiles, it will
+not support the Legacy profiles and vice-versa.
 
- BALANCED_USTT                  0xA0
- BALANCED_PERFORMANCE_USTT      0xA1
- COOL_USTT                      0xA2
- QUIET_USTT                     0xA3
- PERFORMANCE_USTT               0xA4
- LOW_POWER_USTT                 0xA5
-
- QUIET                          0x96
- BALANCED                       0x97
- BALANCED_PERFORMANCE           0x98
- PERFORMANCE                    0x99
-
- GMODE                          0xAB
-
-Usually if a model doesn't support the first four profiles they will support
-the User Selectable Thermal Tables (USTT) profiles and vice-versa.
-
-GMODE replaces PERFORMANCE in G-Series laptops.
+Every model supports the CUSTOM (0x00) thermal profile. GMODE replaces
+PERFORMANCE in G-Series laptops.
 
 WMI method GameShiftStatus([in] uint32 arg2, [out] uint32 argr)
 ---------------------------------------------------------------
 
-::
-
- if BYTE_0(arg2) == 0x1:
-         TOGGLE_GAME_SHIFT()
-         argr = GET_GAME_SHIFT_STATUS()
-
- if BYTE_0(arg2) == 0x2:
-         argr = GET_GAME_SHIFT_STATUS()
++--------------------+------------------------------------+--------------------+
+| Operation (Byte 0) | Description                        | Arguments          |
++====================+====================================+====================+
+| 0x01               | Toggle *Game Shift*.               | - None             |
++--------------------+------------------------------------+--------------------+
+| 0x02               | Get *Game Shift* status.           | - None             |
++--------------------+------------------------------------+--------------------+
 
 Game Shift Status does not change the fan speed profile but it could be some
 sort of CPU/GPU power profile. Benchmarks have not been done.
@@ -267,131 +222,27 @@ Thermal_Information does not list it.
 G-key on Dell's G-Series laptops also changes Game Shift status, so both are
 directly related.
 
-WMI method GetFanSensors([in] uint32 arg2, [out] uint32 argr)
--------------------------------------------------------------
-
-::
-
- if BYTE_0(arg2) == 0x1:
-        if is_valid_fan(BYTE_1(arg2)):
-                argr = 1
-        else:
-                argr = 0
-
- if BYTE_0(arg2) == 0x2:
-        if is_valid_fan(BYTE_1(arg2)):
-                if BYTE_2(arg2) == 0:
-                        argr == SENSOR_ID
-                else
-                        argr == 0xFFFFFFFF
-        else:
-                argr = 0
-
 Overclocking Methods
 ====================
 
-.. warning::
-   These methods have not been tested and are only partially reverse
-   engineered.
-
-WMI method Return_OverclockingReport([out] uint32 argr)
--------------------------------------------------------
-
-::
-
- CSMI (0xE3, 0x99)
- argr = 0
-
-CSMI is an unknown operation.
-
-WMI method Set_OCUIBIOSControl([in] uint32 arg2, [out] uint32 argr)
--------------------------------------------------------------------
-
-::
-
- CSMI (0xE3, 0x99)
- argr = 0
-
-CSMI is an unknown operation.
-
-WMI method Clear_OCFailSafeFlag([out] uint32 argr)
---------------------------------------------------
-
-::
-
- CSMI (0xE3, 0x99)
- argr = 0
-
-CSMI is an unknown operation.
-
-
 WMI method MemoryOCControl([in] uint32 arg2, [out] uint32 argr)
 ---------------------------------------------------------------
 
 AWCC supports memory overclocking, but this method is very intricate and has
 not been deciphered yet.
 
-GPIO methods
-============
-
-These methods are probably related to some kind of firmware update system,
-through a GPIO device.
-
-.. warning::
-   These methods have not been tested and are only partially reverse
-   engineered.
-
-WMI method FWUpdateGPIOtoggle([in] uint32 arg2, [out] uint32 argr)
-------------------------------------------------------------------
-
-::
-
- if BYTE_0(arg2) == 0:
-         if BYTE_1(arg2) == 1:
-                 SET_PIN_A_HIGH()
-         else:
-                 SET_PIN_A_LOW()
-
- if BYTE_0(arg2) == 1:
-         if BYTE_1(arg2) == 1:
-                 SET_PIN_B_HIGH()
-
-         else:
-                 SET_PIN_B_LOW()
-
- else:
-         argr = 1
-
-WMI method ReadTotalofGPIOs([out] uint32 argr)
-----------------------------------------------
-
-::
-
- argr = 0x02
-
-WMI method ReadGPIOpPinStatus([in] uint32 arg2, [out] uint32 argr)
-------------------------------------------------------------------
-
-::
-
- if BYTE_0(arg2) == 0:
-         argr = PIN_A_STATUS
-
- if BYTE_0(arg2) == 1:
-         argr = PIN_B_STATUS
-
 Other information Methods
 =========================
 
 WMI method ReadChassisColor([out] uint32 argr)
 ----------------------------------------------
 
-::
-
- argr = CHASSIS_COLOR_ID
+Returns the chassis color internal ID.
 
 Acknowledgements
 ================
 
-Kudos to `AlexIII <https://github.com/AlexIII/tcc-g15>`_ for documenting
-and testing available thermal profile codes.
+Kudos to `AlexIII <https://github.com/AlexIII/tcc-g15>`_ and
+`T-Troll <https://github.com/T-Troll/alienfx-tools/>`_ for documenting and
+testing some of this device's functionality, making it possible to generalize
+this driver.

-- 
2.48.1

[PATCH v6 11/12] Documentation: admin-guide: laptops: Add documentation for alienware-wmi

[Kurt Borja]

Add driver admin-guide documentation for the alienware-wmi driver.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 .../admin-guide/laptops/alienware-wmi.rst          | 128 +++++++++++++++++++++
 Documentation/admin-guide/laptops/index.rst        |   1 +
 MAINTAINERS                                        |   1 +
 3 files changed, 130 insertions(+)

diff --git a/Documentation/admin-guide/laptops/alienware-wmi.rst b/Documentation/admin-guide/laptops/alienware-wmi.rst
new file mode 100644
index 0000000000000000000000000000000000000000..fe7dec73706f8ec85040dc1cbaec38ffda70b563
--- /dev/null
+++ b/Documentation/admin-guide/laptops/alienware-wmi.rst
@@ -0,0 +1,128 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+====================
+Alienware WMI Driver
+====================
+
+Kurt Borja <kuurtb@gmail.com>
+
+This is a driver for the "WMAX" WMI device, which is found in most Dell gaming
+laptops and controls various special features.
+
+Before the launch of M-Series laptops (~2018), the "WMAX" device controlled
+basic RGB lighting, deep sleep mode, HDMI mode and amplifier status.
+
+Later, this device was completely repurpused. Now it mostly deals with thermal
+profiles, sensor monitoring and overclocking. This interface is named "AWCC" and
+is known to be used by the AWCC OEM application to control these features.
+
+The alienware-wmi driver controls both interfaces.
+
+AWCC Interface
+==============
+
+WMI device documentation: Documentation/wmi/devices/alienware-wmi.rst
+
+Supported devices
+-----------------
+
+- Alienware M-Series laptops
+- Alienware X-Series laptops
+- Alienware Aurora Desktops
+- Dell G-Series laptops
+
+If you believe your device supports the AWCC interface and you don't have any of
+the features described in this document, try the following alienware-wmi module
+parameters:
+
+- ``force_platform_profile=1``: Forces probing for platform profile support
+- ``force_hwmon=1``: Forces probing for HWMON support
+
+If the module loads successfully with these parameters, consider submitting a
+patch adding your model to the ``awcc_dmi_table`` located in
+``drivers/platform/x86/dell/alienware-wmi-wmax.c`` or contacting the maintainer
+for further guidance.
+
+Status
+------
+
+The following features are currently supported:
+
+- :ref:`Platform Profile <platform-profile>`:
+
+  - Thermal profile control
+
+  - G-Mode toggling
+
+- :ref:`HWMON <hwmon>`:
+
+  - Sensor monitoring
+
+  - Manual fan control
+
+.. _platform-profile:
+
+Platform Profile
+----------------
+
+The AWCC interface exposes various firmware defined thermal profiles. We expose
+these profiles to user-space through the Platform Profile class interface.
+Refer to
+:ref:`sysfs-class-platform-profile <abi_file_testing_sysfs_class_platform_profile>`
+for more information.
+
+The name of the platform-profile class device exported by this driver is
+"alienware-wmi" and it's path can be found with:
+
+::
+
+ grep -l "alienware-wmi" /sys/class/platform-profile/platform-profile-*/name | sed 's|/[^/]*$||'
+
+If the device supports G-Mode, it is also toggled when selecting the
+``performance`` profile.
+
+.. note::
+   You may set the ``force_gmode`` module parameter to always try to toggle this
+   feature, without checking if your model supports it.
+
+.. _hwmon:
+
+HWMON
+-----
+
+The AWCC interface also supports sensor monitoring and manual fan control. Both
+of these features are exposed to user-space through the HWMON interface.
+
+The name of the hwmon class device exported by this driver is "alienware_wmi"
+and it's path can be found with:
+
+::
+
+ grep -l "alienware_wmi" /sys/class/hwmon/hwmon*/name | sed 's|/[^/]*$||'
+
+Sensor monitoring is done through the standard HWMON interface. Refer to
+:ref:`sysfs-class-hwmon <abi_file_testing_sysfs_class_hwmon>` for more
+information.
+
+Manual fan control on the other hand, is not exposed directly by the AWCC
+interface. Instead it let's us control a fan `boost` value. This `boost` value
+has the following aproximate behavior over the fan pwm:
+
+::
+
+ pwm = pwm_base + (fan_boost / 255) * (pwm_max - pwm_base)
+
+Due to the above behavior, we expose the fan `boost` control to user-space
+through the following, custom hwmon sysfs attribute:
+
+=============================== ======= =======================================
+Name				Perm	Description
+=============================== ======= =======================================
+fan[1-4]_boost			RW	Fan boost value.
+
+					Integer value between 0 and 255
+=============================== ======= =======================================
+
+.. note::
+   In some devices, manual fan control only works reliably if the ``custom``
+   platform profile is selected.
diff --git a/Documentation/admin-guide/laptops/index.rst b/Documentation/admin-guide/laptops/index.rst
index e71c8984c23e43ca7cd6373b88803354dff6bc60..db842b629303c1bcf02646204d51938f9bd4043e 100644
--- a/Documentation/admin-guide/laptops/index.rst
+++ b/Documentation/admin-guide/laptops/index.rst
@@ -7,6 +7,7 @@ Laptop Drivers
 .. toctree::
    :maxdepth: 1
 
+   alienware-wmi
    asus-laptop
    disk-shock-protection
    laptop-mode
diff --git a/MAINTAINERS b/MAINTAINERS
index 1afd30d00aecf9a48f8c71e156affd5f329539bd..c609bc321b8dc3ab0e8d92b04e42483be8cc171c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -796,6 +796,7 @@ M:	Kurt Borja <kuurtb@gmail.com>
 L:	platform-driver-x86@vger.kernel.org
 L:	Dell.Client.Kernel@dell.com
 S:	Maintained
+F:	Documentation/admin-guide/laptops/alienware-wmi.rst
 F:	Documentation/wmi/devices/alienware-wmi.rst
 F:	drivers/platform/x86/dell/alienware-wmi*
 

-- 
2.48.1

Re: [PATCH v6 11/12] Documentation: admin-guide: laptops: Add documentation for alienware-wmi

[Ilpo Järvinen]

On Thu, 13 Mar 2025, Kurt Borja wrote:

> Add driver admin-guide documentation for the alienware-wmi driver.
> 
> Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
> ---
>  .../admin-guide/laptops/alienware-wmi.rst          | 128 +++++++++++++++++++++
>  Documentation/admin-guide/laptops/index.rst        |   1 +
>  MAINTAINERS                                        |   1 +
>  3 files changed, 130 insertions(+)
> 
> diff --git a/Documentation/admin-guide/laptops/alienware-wmi.rst b/Documentation/admin-guide/laptops/alienware-wmi.rst
> new file mode 100644
> index 0000000000000000000000000000000000000000..fe7dec73706f8ec85040dc1cbaec38ffda70b563
> --- /dev/null
> +++ b/Documentation/admin-guide/laptops/alienware-wmi.rst
> @@ -0,0 +1,128 @@
> +.. SPDX-License-Identifier: GPL-2.0-or-later
> +
> +====================
> +Alienware WMI Driver
> +====================
> +
> +Kurt Borja <kuurtb@gmail.com>
> +
> +This is a driver for the "WMAX" WMI device, which is found in most Dell gaming
> +laptops and controls various special features.
> +
> +Before the launch of M-Series laptops (~2018), the "WMAX" device controlled
> +basic RGB lighting, deep sleep mode, HDMI mode and amplifier status.
> +
> +Later, this device was completely repurpused. Now it mostly deals with thermal

repurposed

> +profiles, sensor monitoring and overclocking. This interface is named "AWCC" and
> +is known to be used by the AWCC OEM application to control these features.
> +
> +The alienware-wmi driver controls both interfaces.
> +
> +AWCC Interface
> +==============
> +
> +WMI device documentation: Documentation/wmi/devices/alienware-wmi.rst
> +
> +Supported devices
> +-----------------
> +
> +- Alienware M-Series laptops
> +- Alienware X-Series laptops
> +- Alienware Aurora Desktops
> +- Dell G-Series laptops
> +
> +If you believe your device supports the AWCC interface and you don't have any of
> +the features described in this document, try the following alienware-wmi module
> +parameters:
> +
> +- ``force_platform_profile=1``: Forces probing for platform profile support
> +- ``force_hwmon=1``: Forces probing for HWMON support
> +
> +If the module loads successfully with these parameters, consider submitting a
> +patch adding your model to the ``awcc_dmi_table`` located in
> +``drivers/platform/x86/dell/alienware-wmi-wmax.c`` or contacting the maintainer
> +for further guidance.
> +
> +Status
> +------
> +
> +The following features are currently supported:
> +
> +- :ref:`Platform Profile <platform-profile>`:
> +
> +  - Thermal profile control
> +
> +  - G-Mode toggling
> +
> +- :ref:`HWMON <hwmon>`:
> +
> +  - Sensor monitoring
> +
> +  - Manual fan control
> +
> +.. _platform-profile:
> +
> +Platform Profile
> +----------------
> +
> +The AWCC interface exposes various firmware defined thermal profiles. We expose

Please don't use "We".

-- 
 i.

> +these profiles to user-space through the Platform Profile class interface.
> +Refer to
> +:ref:`sysfs-class-platform-profile <abi_file_testing_sysfs_class_platform_profile>`
> +for more information.
> +
> +The name of the platform-profile class device exported by this driver is
> +"alienware-wmi" and it's path can be found with:
> +
> +::
> +
> + grep -l "alienware-wmi" /sys/class/platform-profile/platform-profile-*/name | sed 's|/[^/]*$||'
> +
> +If the device supports G-Mode, it is also toggled when selecting the
> +``performance`` profile.
> +
> +.. note::
> +   You may set the ``force_gmode`` module parameter to always try to toggle this
> +   feature, without checking if your model supports it.
> +
> +.. _hwmon:
> +
> +HWMON
> +-----
> +
> +The AWCC interface also supports sensor monitoring and manual fan control. Both
> +of these features are exposed to user-space through the HWMON interface.
> +
> +The name of the hwmon class device exported by this driver is "alienware_wmi"
> +and it's path can be found with:
> +
> +::
> +
> + grep -l "alienware_wmi" /sys/class/hwmon/hwmon*/name | sed 's|/[^/]*$||'
> +
> +Sensor monitoring is done through the standard HWMON interface. Refer to
> +:ref:`sysfs-class-hwmon <abi_file_testing_sysfs_class_hwmon>` for more
> +information.
> +
> +Manual fan control on the other hand, is not exposed directly by the AWCC
> +interface. Instead it let's us control a fan `boost` value. This `boost` value
> +has the following aproximate behavior over the fan pwm:
> +
> +::
> +
> + pwm = pwm_base + (fan_boost / 255) * (pwm_max - pwm_base)
> +
> +Due to the above behavior, we expose the fan `boost` control to user-space
> +through the following, custom hwmon sysfs attribute:
> +
> +=============================== ======= =======================================
> +Name				Perm	Description
> +=============================== ======= =======================================
> +fan[1-4]_boost			RW	Fan boost value.
> +
> +					Integer value between 0 and 255
> +=============================== ======= =======================================
> +
> +.. note::
> +   In some devices, manual fan control only works reliably if the ``custom``
> +   platform profile is selected.
> diff --git a/Documentation/admin-guide/laptops/index.rst b/Documentation/admin-guide/laptops/index.rst
> index e71c8984c23e43ca7cd6373b88803354dff6bc60..db842b629303c1bcf02646204d51938f9bd4043e 100644
> --- a/Documentation/admin-guide/laptops/index.rst
> +++ b/Documentation/admin-guide/laptops/index.rst
> @@ -7,6 +7,7 @@ Laptop Drivers
>  .. toctree::
>     :maxdepth: 1
>  
> +   alienware-wmi
>     asus-laptop
>     disk-shock-protection
>     laptop-mode
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1afd30d00aecf9a48f8c71e156affd5f329539bd..c609bc321b8dc3ab0e8d92b04e42483be8cc171c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -796,6 +796,7 @@ M:	Kurt Borja <kuurtb@gmail.com>
>  L:	platform-driver-x86@vger.kernel.org
>  L:	Dell.Client.Kernel@dell.com
>  S:	Maintained
> +F:	Documentation/admin-guide/laptops/alienware-wmi.rst
>  F:	Documentation/wmi/devices/alienware-wmi.rst
>  F:	drivers/platform/x86/dell/alienware-wmi*
>  
> 
> 

[PATCH v6 12/12] Documentation: ABI: Add sysfs platform and debugfs ABI documentation for alienware-wmi

[Kurt Borja]

Add ABI description for the alienware-wmi driver.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 Documentation/ABI/testing/debugfs-alienware-wmi    | 44 ++++++++++++++++++++++
 .../ABI/testing/sysfs-platform-alienware-wmi       | 14 +++++++
 MAINTAINERS                                        |  2 +
 3 files changed, 60 insertions(+)

diff --git a/Documentation/ABI/testing/debugfs-alienware-wmi b/Documentation/ABI/testing/debugfs-alienware-wmi
new file mode 100644
index 0000000000000000000000000000000000000000..48cfd4d0b002efd7b68d9c1d3aa91a3a05f49db5
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-alienware-wmi
@@ -0,0 +1,44 @@
+What:		/sys/kernel/debug/alienware-wmi-<wmi_device_name>/system_description
+Date:		March 2025
+KernelVersion:	6.15
+Contact:	Kurt Borja <kuurtb@gmail.com>
+Description:
+		This file exposes the raw ``system_description`` number reported
+		by the WMAX device.
+
+		Only present on devices with the AWCC interface.
+
+		See Documentation/admin-guide/laptops/alienware-wmi.rst for
+		details.
+
+		RO
+
+What:		/sys/kernel/debug/alienware-wmi-<wmi_device_name>/hwmon_data
+Date:		March 2025
+KernelVersion:	6.15
+Contact:	Kurt Borja <kuurtb@gmail.com>
+Description:
+		This file exposes HWMON private data.
+
+		Includes fan sensor count, temperature sensor count, internal
+		fan IDs and internal temp IDs.
+
+		See Documentation/admin-guide/laptops/alienware-wmi.rst for
+		details.
+
+		RO
+
+What:		/sys/kernel/debug/alienware-wmi-<wmi_device_name>/pprof_data
+Date:		March 2025
+KernelVersion:	6.15
+Contact:	Kurt Borja <kuurtb@gmail.com>
+Description:
+		This file exposes Platform Profile private data.
+
+		Includes internal mapping to platform profiles and thermal
+		profile IDs.
+
+		See Documentation/admin-guide/laptops/alienware-wmi.rst for
+		details.
+
+		RO
diff --git a/Documentation/ABI/testing/sysfs-platform-alienware-wmi b/Documentation/ABI/testing/sysfs-platform-alienware-wmi
new file mode 100644
index 0000000000000000000000000000000000000000..4877b3745f4e5b503376d375bf48464250328ce2
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-alienware-wmi
@@ -0,0 +1,14 @@
+What:		/sys/class/hwmon/hwmonX/fanY_boost
+Date:		March 2025
+KernelVersion:	6.15
+Contact:	Kurt Borja <kuurtb@gmail.com>
+Description:
+		This file exposes fan boost control for Dell gaming laptops with
+		the AWCC WMI interface.
+
+		See Documentation/admin-guide/laptops/alienware-wmi.rst for
+		details.
+
+		Integer value in the range 0 to 255
+
+		RW
diff --git a/MAINTAINERS b/MAINTAINERS
index c609bc321b8dc3ab0e8d92b04e42483be8cc171c..faa377126bda0b9c848760495dc893982f3a4c3a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -796,6 +796,8 @@ M:	Kurt Borja <kuurtb@gmail.com>
 L:	platform-driver-x86@vger.kernel.org
 L:	Dell.Client.Kernel@dell.com
 S:	Maintained
+F:	Documentation/ABI/testing/debugfs-alienware-wmi
+F:	Documentation/ABI/testing/sysfs-platform-alienware-wmi
 F:	Documentation/admin-guide/laptops/alienware-wmi.rst
 F:	Documentation/wmi/devices/alienware-wmi.rst
 F:	drivers/platform/x86/dell/alienware-wmi*

-- 
2.48.1

Re: [PATCH v6 00/12] platform/x86: alienware-wmi-wmax: HWMON support + DebugFS + Improvements

[Armin Wolf]

Am 13.03.25 um 15:29 schrieb Kurt Borja:

> Hi all,
>
> This set mainly adds hwmon and manual fan control support (patches 7-8)
> to the alienware-wmi driver, after some improvements.
>
> Thank you for your feedback :)

 From my perspective the whole series is ready for inclusion into the mainline kernel.

Thanks,
Armin Wolf

> ---
> Changes in v6:
>
> [08/12]
>    - Define dev_pm_ops statically (kernel test robot)
>
> Link to v5: https://lore.kernel.org/r/20250312-hwm-v5-0-deb15ff8f3c6@gmail.com
>
> ---
> Kurt Borja (12):
>        platform/x86: alienware-wmi-wmax: Rename thermal related symbols
>        platform/x86: alienware-wmi-wmax: Refactor is_awcc_thermal_mode()
>        platform/x86: alienware-wmi-wmax: Improve internal AWCC API
>        platform/x86: alienware-wmi-wmax: Modify supported_thermal_profiles[]
>        platform/x86: alienware-wmi-wmax: Improve platform profile probe
>        platform/x86: alienware-wmi-wmax: Add support for the "custom" thermal profile
>        platform/x86: alienware-wmi-wmax: Add HWMON support
>        platform/x86: alienware-wmi-wmax: Add support for manual fan control
>        platform/x86: alienware-wmi-wmax: Add a DebugFS interface
>        Documentation: wmi: Improve and update alienware-wmi documentation
>        Documentation: admin-guide: laptops: Add documentation for alienware-wmi
>        Documentation: ABI: Add sysfs platform and debugfs ABI documentation for alienware-wmi
>
>   Documentation/ABI/testing/debugfs-alienware-wmi    |   44 +
>   .../ABI/testing/sysfs-platform-alienware-wmi       |   14 +
>   .../admin-guide/laptops/alienware-wmi.rst          |  128 +++
>   Documentation/admin-guide/laptops/index.rst        |    1 +
>   Documentation/wmi/devices/alienware-wmi.rst        |  383 +++-----
>   MAINTAINERS                                        |    3 +
>   drivers/platform/x86/dell/Kconfig                  |    1 +
>   drivers/platform/x86/dell/alienware-wmi-wmax.c     | 1023 +++++++++++++++++---
>   8 files changed, 1187 insertions(+), 410 deletions(-)
> ---
> base-commit: f895f2493098b862f1ada0568aba278e49bf05b4
> change-id: 20250305-hwm-f7bd91902b57
>
> Best regards,

Re: [PATCH v6 00/12] platform/x86: alienware-wmi-wmax: HWMON support + DebugFS + Improvements

[Kurt Borja]

On Thu Mar 13, 2025 at 11:29 AM -03, Kurt Borja wrote:
> Hi all,
>
> This set mainly adds hwmon and manual fan control support (patches 7-8)
> to the alienware-wmi driver, after some improvements.
>
> Thank you for your feedback :)
>
> ---
> Changes in v6:
>
> [08/12]
>   - Define dev_pm_ops statically (kernel test robot)
>
> Link to v5: https://lore.kernel.org/r/20250312-hwm-v5-0-deb15ff8f3c6@gmail.com
>
> ---
> Kurt Borja (12):
>       platform/x86: alienware-wmi-wmax: Rename thermal related symbols
>       platform/x86: alienware-wmi-wmax: Refactor is_awcc_thermal_mode()
>       platform/x86: alienware-wmi-wmax: Improve internal AWCC API
>       platform/x86: alienware-wmi-wmax: Modify supported_thermal_profiles[]
>       platform/x86: alienware-wmi-wmax: Improve platform profile probe
>       platform/x86: alienware-wmi-wmax: Add support for the "custom" thermal profile
>       platform/x86: alienware-wmi-wmax: Add HWMON support
>       platform/x86: alienware-wmi-wmax: Add support for manual fan control
>       platform/x86: alienware-wmi-wmax: Add a DebugFS interface
>       Documentation: wmi: Improve and update alienware-wmi documentation
>       Documentation: admin-guide: laptops: Add documentation for alienware-wmi
>       Documentation: ABI: Add sysfs platform and debugfs ABI documentation for alienware-wmi
>
>  Documentation/ABI/testing/debugfs-alienware-wmi    |   44 +
>  .../ABI/testing/sysfs-platform-alienware-wmi       |   14 +
>  .../admin-guide/laptops/alienware-wmi.rst          |  128 +++
>  Documentation/admin-guide/laptops/index.rst        |    1 +
>  Documentation/wmi/devices/alienware-wmi.rst        |  383 +++-----
>  MAINTAINERS                                        |    3 +
>  drivers/platform/x86/dell/Kconfig                  |    1 +
>  drivers/platform/x86/dell/alienware-wmi-wmax.c     | 1023 +++++++++++++++++---
>  8 files changed, 1187 insertions(+), 410 deletions(-)
> ---
> base-commit: f895f2493098b862f1ada0568aba278e49bf05b4
> change-id: 20250305-hwm-f7bd91902b57
>
> Best regards,

Hi Ilpo,

Is there still a chance for this to go into v6.15? or are you planning
to review it on the next cycle?

Thank you either way!

-- 
 ~ Kurt

Re: [PATCH v6 00/12] platform/x86: alienware-wmi-wmax: HWMON support + DebugFS + Improvements

[Ilpo Järvinen]

On Tue, 25 Mar 2025, Kurt Borja wrote:
> On Thu Mar 13, 2025 at 11:29 AM -03, Kurt Borja wrote:
> > Hi all,
> >
> > This set mainly adds hwmon and manual fan control support (patches 7-8)
> > to the alienware-wmi driver, after some improvements.
> >
> > Thank you for your feedback :)
> >
> > ---
> > Changes in v6:
> >
> > [08/12]
> >   - Define dev_pm_ops statically (kernel test robot)
> >
> > Link to v5: https://lore.kernel.org/r/20250312-hwm-v5-0-deb15ff8f3c6@gmail.com
> >
> > ---
> > Kurt Borja (12):
> >       platform/x86: alienware-wmi-wmax: Rename thermal related symbols
> >       platform/x86: alienware-wmi-wmax: Refactor is_awcc_thermal_mode()
> >       platform/x86: alienware-wmi-wmax: Improve internal AWCC API
> >       platform/x86: alienware-wmi-wmax: Modify supported_thermal_profiles[]
> >       platform/x86: alienware-wmi-wmax: Improve platform profile probe
> >       platform/x86: alienware-wmi-wmax: Add support for the "custom" thermal profile
> >       platform/x86: alienware-wmi-wmax: Add HWMON support
> >       platform/x86: alienware-wmi-wmax: Add support for manual fan control
> >       platform/x86: alienware-wmi-wmax: Add a DebugFS interface
> >       Documentation: wmi: Improve and update alienware-wmi documentation
> >       Documentation: admin-guide: laptops: Add documentation for alienware-wmi
> >       Documentation: ABI: Add sysfs platform and debugfs ABI documentation for alienware-wmi
> >
> >  Documentation/ABI/testing/debugfs-alienware-wmi    |   44 +
> >  .../ABI/testing/sysfs-platform-alienware-wmi       |   14 +
> >  .../admin-guide/laptops/alienware-wmi.rst          |  128 +++
> >  Documentation/admin-guide/laptops/index.rst        |    1 +
> >  Documentation/wmi/devices/alienware-wmi.rst        |  383 +++-----
> >  MAINTAINERS                                        |    3 +
> >  drivers/platform/x86/dell/Kconfig                  |    1 +
> >  drivers/platform/x86/dell/alienware-wmi-wmax.c     | 1023 +++++++++++++++++---
> >  8 files changed, 1187 insertions(+), 410 deletions(-)
> > ---
> > base-commit: f895f2493098b862f1ada0568aba278e49bf05b4
> > change-id: 20250305-hwm-f7bd91902b57
> >
> > Best regards,
> 
> Hi Ilpo,
> 
> Is there still a chance for this to go into v6.15? or are you planning
> to review it on the next cycle?

Hi,

I'm almost there to make the main PR for 6.15 from what's in for-next 
currently, so no, this won't be part of it.

In general, I don't usually take large series after -rc6 timeframe to give 
time for things to settle and problems to be brought to surface.
Especially if the series is interfacing with other subsystems which is 
prone to lack of select/depends on clauses, etc. so more likely to break 
the build than changes that seem immune to the .config variations.

-- 
 i.

Re: [PATCH v6 00/12] platform/x86: alienware-wmi-wmax: HWMON support + DebugFS + Improvements

[Kurt Borja]

On Wed Mar 26, 2025 at 5:34 AM -03, Ilpo Järvinen wrote:
> On Tue, 25 Mar 2025, Kurt Borja wrote:
>> On Thu Mar 13, 2025 at 11:29 AM -03, Kurt Borja wrote:
>> > Hi all,
>> >
>> > This set mainly adds hwmon and manual fan control support (patches 7-8)
>> > to the alienware-wmi driver, after some improvements.
>> >
>> > Thank you for your feedback :)
>> >
>> > ---
>> > Changes in v6:
>> >
>> > [08/12]
>> >   - Define dev_pm_ops statically (kernel test robot)
>> >
>> > Link to v5: https://lore.kernel.org/r/20250312-hwm-v5-0-deb15ff8f3c6@gmail.com
>> >
>> > ---
>> > Kurt Borja (12):
>> >       platform/x86: alienware-wmi-wmax: Rename thermal related symbols
>> >       platform/x86: alienware-wmi-wmax: Refactor is_awcc_thermal_mode()
>> >       platform/x86: alienware-wmi-wmax: Improve internal AWCC API
>> >       platform/x86: alienware-wmi-wmax: Modify supported_thermal_profiles[]
>> >       platform/x86: alienware-wmi-wmax: Improve platform profile probe
>> >       platform/x86: alienware-wmi-wmax: Add support for the "custom" thermal profile
>> >       platform/x86: alienware-wmi-wmax: Add HWMON support
>> >       platform/x86: alienware-wmi-wmax: Add support for manual fan control
>> >       platform/x86: alienware-wmi-wmax: Add a DebugFS interface
>> >       Documentation: wmi: Improve and update alienware-wmi documentation
>> >       Documentation: admin-guide: laptops: Add documentation for alienware-wmi
>> >       Documentation: ABI: Add sysfs platform and debugfs ABI documentation for alienware-wmi
>> >
>> >  Documentation/ABI/testing/debugfs-alienware-wmi    |   44 +
>> >  .../ABI/testing/sysfs-platform-alienware-wmi       |   14 +
>> >  .../admin-guide/laptops/alienware-wmi.rst          |  128 +++
>> >  Documentation/admin-guide/laptops/index.rst        |    1 +
>> >  Documentation/wmi/devices/alienware-wmi.rst        |  383 +++-----
>> >  MAINTAINERS                                        |    3 +
>> >  drivers/platform/x86/dell/Kconfig                  |    1 +
>> >  drivers/platform/x86/dell/alienware-wmi-wmax.c     | 1023 +++++++++++++++++---
>> >  8 files changed, 1187 insertions(+), 410 deletions(-)
>> > ---
>> > base-commit: f895f2493098b862f1ada0568aba278e49bf05b4
>> > change-id: 20250305-hwm-f7bd91902b57
>> >
>> > Best regards,
>> 
>> Hi Ilpo,
>> 
>> Is there still a chance for this to go into v6.15? or are you planning
>> to review it on the next cycle?
>
> Hi,
>
> I'm almost there to make the main PR for 6.15 from what's in for-next 
> currently, so no, this won't be part of it.
>
> In general, I don't usually take large series after -rc6 timeframe to give 
> time for things to settle and problems to be brought to surface.
> Especially if the series is interfacing with other subsystems which is 
> prone to lack of select/depends on clauses, etc. so more likely to break 
> the build than changes that seem immune to the .config variations.

Oh - I'll keep in mind this in the future. Thank you!

-- 
 ~ Kurt