public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH v4 0/6] RDMA/rxe: Add RDMA FLUSH operation
@ 2022-08-05  7:46 Li Zhijian
  2022-08-05  7:46 ` [PATCH v4 1/6] RDMA: Allow registering MR with flush access flags Li Zhijian
                   ` (5 more replies)
  0 siblings, 6 replies; 10+ messages in thread
From: Li Zhijian @ 2022-08-05  7:46 UTC (permalink / raw)
  To: Jason Gunthorpe, Zhu Yanjun, Leon Romanovsky, linux-rdma
  Cc: Xiao Yang, y-goto, Bob Pearson, Mark Bloch, Aharon Landau,
	Tom Talpey, tomasz.gromadzki, Dan Williams, linux-kernel,
	Li Zhijian, Wenpeng Liang

Hey folks,

It's been a long time since the 3rd, in the meantime, some RXE regressions have
been fixed by comminity. So It'd like to post my 4th version. feedbacks are
very welcome :).

Thanks.

These patches are going to implement a *NEW* RDMA opcode "RDMA FLUSH".
In IB SPEC 1.5[1], 2 new opcodes, ATOMIC WRITE and RDMA FLUSH were
added in the MEMORY PLACEMENT EXTENSIONS section.

This patchset makes SoftRoCE support new RDMA FLUSH on RC service.

You can verify the patchset by building and running the rdma_flush example[2].
server:
$ ./rdma_flush_server -s [server_address] -p [port_number]
client:
$ ./rdma_flush_client -s [server_address] -p [port_number]

Corresponding pyverbs and tests(tests.test_qpex.QpExTestCase.test_qp_ex_rc_rdma_flush)
are also added to rdma-core

This patches do:
- Make memory region support FLUSH access flags
- Make HCA/device support FLUSH capabilities(placement type attributes).
- Implement new packet for FLUSH request.

[1]: https://www.infinibandta.org/wp-content/uploads/2021/08/IBTA-Overview-of-IBTA-Volume-1-Release-1.5-and-MPE-2021-08-17-Secure.pptx
[2]: https://github.com/zhijianli88/rdma-core/tree/rdma-flush

CC: Xiao Yang <yangx.jy@fujitsu.com>
CC: "Gotou, Yasunori" <y-goto@fujitsu.com>
CC: Jason Gunthorpe <jgg@ziepe.ca>
CC: Zhu Yanjun <zyjzyj2000@gmail.com
CC: Leon Romanovsky <leon@kernel.org>
CC: Bob Pearson <rpearsonhpe@gmail.com>
CC: Mark Bloch <mbloch@nvidia.com>
CC: Wenpeng Liang <liangwenpeng@huawei.com>
CC: Aharon Landau <aharonl@nvidia.com>
CC: Tom Talpey <tom@talpey.com>
CC: "Gromadzki, Tomasz" <tomasz.gromadzki@intel.com>
CC: Dan Williams <dan.j.williams@intel.com>
CC: linux-rdma@vger.kernel.org
CC: linux-kernel@vger.kernel.org

Can also access the kernel source in:
https://github.com/zhijianli88/linux/tree/rdma-flush
Changes log
V4:
- rework responder process
- rebase to v5.19+
- remove [7/7]: RDMA/rxe: Add RD FLUSH service support since RD is not really supported

V3:
- Just rebase and commit log and comment updates
- delete patch-1: "RDMA: mr: Introduce is_pmem", which will be combined into "Allow registering persistent flag for pmem MR only"
- delete patch-7

V2:
RDMA: mr: Introduce is_pmem
   check 1st byte to avoid crossing page boundary
   new scheme to check is_pmem # Dan

RDMA: Allow registering MR with flush access flags
   combine with [03/10] RDMA/rxe: Allow registering FLUSH flags for supported device only to this patch # Jason
   split RDMA_FLUSH to 2 capabilities

RDMA/rxe: Allow registering persistent flag for pmem MR only
   update commit message, get rid of confusing ib_check_flush_access_flags() # Tom

RDMA/rxe: Implement RC RDMA FLUSH service in requester side
   extend flush to include length field. # Tom and Tomasz

RDMA/rxe: Implement flush execution in responder side
   adjust start for WHOLE MR level # Tom
   don't support DMA mr for flush # Tom
   check flush return value

RDMA/rxe: Enable RDMA FLUSH capability for rxe device
   adjust patch's order. move it here from [04/10]
Li Zhijian (6):
  RDMA: Allow registering MR with flush access flags
  RDMA/rxe: Allow registering persistent flag for pmem MR only
  RDMA/rxe: Implement RC RDMA FLUSH service in requester side
  RDMA/rxe: Implement flush execution in responder side
  RDMA/rxe: Implement flush completion
  RDMA/rxe: Enable RDMA FLUSH capability for rxe device

 drivers/infiniband/sw/rxe/rxe_comp.c    |   4 +-
 drivers/infiniband/sw/rxe/rxe_hdr.h     |  48 ++++++++
 drivers/infiniband/sw/rxe/rxe_loc.h     |   2 +
 drivers/infiniband/sw/rxe/rxe_mr.c      |  23 +++-
 drivers/infiniband/sw/rxe/rxe_opcode.c  |  21 ++++
 drivers/infiniband/sw/rxe/rxe_opcode.h  |   4 +
 drivers/infiniband/sw/rxe/rxe_param.h   |   4 +-
 drivers/infiniband/sw/rxe/rxe_req.c     |  15 ++-
 drivers/infiniband/sw/rxe/rxe_resp.c    | 149 +++++++++++++++++++++++-
 include/rdma/ib_pack.h                  |   2 +
 include/rdma/ib_verbs.h                 |  19 ++-
 include/uapi/rdma/ib_user_ioctl_verbs.h |   2 +
 include/uapi/rdma/ib_user_verbs.h       |  14 +++
 include/uapi/rdma/rdma_user_rxe.h       |   7 ++
 14 files changed, 302 insertions(+), 12 deletions(-)

-- 
2.31.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2022-08-29  1:41 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-08-05  7:46 [PATCH v4 0/6] RDMA/rxe: Add RDMA FLUSH operation Li Zhijian
2022-08-05  7:46 ` [PATCH v4 1/6] RDMA: Allow registering MR with flush access flags Li Zhijian
2022-08-05  7:46 ` [PATCH v4 2/6] RDMA/rxe: Allow registering persistent flag for pmem MR only Li Zhijian
2022-08-05  7:46 ` [PATCH v4 3/6] RDMA/rxe: Implement RC RDMA FLUSH service in requester side Li Zhijian
2022-08-05  7:46 ` [PATCH v4 4/6] RDMA/rxe: Implement flush execution in responder side Li Zhijian
2022-08-05  7:55 ` [PATCH v4 5/6] RDMA/rxe: Implement flush completion Li Zhijian
2022-08-05  7:55   ` [PATCH v4 6/6] RDMA/rxe: Enable RDMA FLUSH capability for rxe device Li Zhijian
2022-08-26 13:37 ` [PATCH v4 0/6] RDMA/rxe: Add RDMA FLUSH operation Jason Gunthorpe
2022-08-29  1:36   ` yangx.jy
2022-08-29  1:40   ` yangx.jy

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox