From: Frank Li <Frank.li@nxp.com>
To: Larisa Grigore <larisa.grigore@oss.nxp.com>
Cc: dmaengine@vger.kernel.org, imx@lists.linux.dev,
linux-kernel@vger.kernel.org, s32@nxp.com,
Christophe Lizzi <clizzi@redhat.com>,
Alberto Ruiz <aruizrui@redhat.com>,
Enric Balletbo <eballetb@redhat.com>
Subject: Re: [PATCH 3/8] dmaengine: fsl-edma: move eDMAv2 related registers to a new structure ’edma2_regs’
Date: Mon, 16 Dec 2024 11:17:35 -0500 [thread overview]
Message-ID: <Z2BSn91PDfwKOc8s@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20241216075819.2066772-4-larisa.grigore@oss.nxp.com>
On Mon, Dec 16, 2024 at 09:58:13AM +0200, Larisa Grigore wrote:
> Move eDMAv2 related registers to a new structure ’edma2_regs’ to better
> support eDMAv3.
nit: empty line here.
> eDMAv3 registers will be added in the next commit.
>
> Signed-off-by: Larisa Grigore <larisa.grigore@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
> drivers/dma/fsl-edma-common.c | 52 ++++++++++++++++++-----------------
> drivers/dma/fsl-edma-common.h | 10 +++++--
> drivers/dma/fsl-edma-main.c | 14 ++++++----
> 3 files changed, 42 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
> index b7f15ab96855..b132a88dfdec 100644
> --- a/drivers/dma/fsl-edma-common.c
> +++ b/drivers/dma/fsl-edma-common.c
> @@ -108,14 +108,15 @@ static void fsl_edma_enable_request(struct fsl_edma_chan *fsl_chan)
> return fsl_edma3_enable_request(fsl_chan);
>
> if (fsl_chan->edma->drvdata->flags & FSL_EDMA_DRV_WRAP_IO) {
> - edma_writeb(fsl_chan->edma, EDMA_SEEI_SEEI(ch), regs->seei);
> - edma_writeb(fsl_chan->edma, ch, regs->serq);
> + edma_writeb(fsl_chan->edma, EDMA_SEEI_SEEI(ch),
> + regs->v2.seei);
> + edma_writeb(fsl_chan->edma, ch, regs->v2.serq);
> } else {
> /* ColdFire is big endian, and accesses natively
> * big endian I/O peripherals
> */
> - iowrite8(EDMA_SEEI_SEEI(ch), regs->seei);
> - iowrite8(ch, regs->serq);
> + iowrite8(EDMA_SEEI_SEEI(ch), regs->v2.seei);
> + iowrite8(ch, regs->v2.serq);
> }
> }
>
> @@ -142,14 +143,15 @@ void fsl_edma_disable_request(struct fsl_edma_chan *fsl_chan)
> return fsl_edma3_disable_request(fsl_chan);
>
> if (fsl_chan->edma->drvdata->flags & FSL_EDMA_DRV_WRAP_IO) {
> - edma_writeb(fsl_chan->edma, ch, regs->cerq);
> - edma_writeb(fsl_chan->edma, EDMA_CEEI_CEEI(ch), regs->ceei);
> + edma_writeb(fsl_chan->edma, ch, regs->v2.cerq);
> + edma_writeb(fsl_chan->edma, EDMA_CEEI_CEEI(ch),
> + regs->v2.ceei);
> } else {
> /* ColdFire is big endian, and accesses natively
> * big endian I/O peripherals
> */
> - iowrite8(ch, regs->cerq);
> - iowrite8(EDMA_CEEI_CEEI(ch), regs->ceei);
> + iowrite8(ch, regs->v2.cerq);
> + iowrite8(EDMA_CEEI_CEEI(ch), regs->v2.ceei);
> }
> }
>
> @@ -880,25 +882,25 @@ void fsl_edma_setup_regs(struct fsl_edma_engine *edma)
>
> edma->regs.cr = edma->membase + EDMA_CR;
> edma->regs.es = edma->membase + EDMA_ES;
> - edma->regs.erql = edma->membase + EDMA_ERQ;
> - edma->regs.eeil = edma->membase + EDMA_EEI;
> -
> - edma->regs.serq = edma->membase + (is64 ? EDMA64_SERQ : EDMA_SERQ);
> - edma->regs.cerq = edma->membase + (is64 ? EDMA64_CERQ : EDMA_CERQ);
> - edma->regs.seei = edma->membase + (is64 ? EDMA64_SEEI : EDMA_SEEI);
> - edma->regs.ceei = edma->membase + (is64 ? EDMA64_CEEI : EDMA_CEEI);
> - edma->regs.cint = edma->membase + (is64 ? EDMA64_CINT : EDMA_CINT);
> - edma->regs.cerr = edma->membase + (is64 ? EDMA64_CERR : EDMA_CERR);
> - edma->regs.ssrt = edma->membase + (is64 ? EDMA64_SSRT : EDMA_SSRT);
> - edma->regs.cdne = edma->membase + (is64 ? EDMA64_CDNE : EDMA_CDNE);
> - edma->regs.intl = edma->membase + (is64 ? EDMA64_INTL : EDMA_INTR);
> - edma->regs.errl = edma->membase + (is64 ? EDMA64_ERRL : EDMA_ERR);
> + edma->regs.v2.erql = edma->membase + EDMA_ERQ;
> + edma->regs.v2.eeil = edma->membase + EDMA_EEI;
> +
> + edma->regs.v2.serq = edma->membase + (is64 ? EDMA64_SERQ : EDMA_SERQ);
> + edma->regs.v2.cerq = edma->membase + (is64 ? EDMA64_CERQ : EDMA_CERQ);
> + edma->regs.v2.seei = edma->membase + (is64 ? EDMA64_SEEI : EDMA_SEEI);
> + edma->regs.v2.ceei = edma->membase + (is64 ? EDMA64_CEEI : EDMA_CEEI);
> + edma->regs.v2.cint = edma->membase + (is64 ? EDMA64_CINT : EDMA_CINT);
> + edma->regs.v2.cerr = edma->membase + (is64 ? EDMA64_CERR : EDMA_CERR);
> + edma->regs.v2.ssrt = edma->membase + (is64 ? EDMA64_SSRT : EDMA_SSRT);
> + edma->regs.v2.cdne = edma->membase + (is64 ? EDMA64_CDNE : EDMA_CDNE);
> + edma->regs.v2.intl = edma->membase + (is64 ? EDMA64_INTL : EDMA_INTR);
> + edma->regs.v2.errl = edma->membase + (is64 ? EDMA64_ERRL : EDMA_ERR);
>
> if (is64) {
> - edma->regs.erqh = edma->membase + EDMA64_ERQH;
> - edma->regs.eeih = edma->membase + EDMA64_EEIH;
> - edma->regs.errh = edma->membase + EDMA64_ERRH;
> - edma->regs.inth = edma->membase + EDMA64_INTH;
> + edma->regs.v2.erqh = edma->membase + EDMA64_ERQH;
> + edma->regs.v2.eeih = edma->membase + EDMA64_EEIH;
> + edma->regs.v2.errh = edma->membase + EDMA64_ERRH;
> + edma->regs.v2.inth = edma->membase + EDMA64_INTH;
> }
> }
>
> diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
> index ce37e1ee9c46..f1362daaa347 100644
> --- a/drivers/dma/fsl-edma-common.h
> +++ b/drivers/dma/fsl-edma-common.h
> @@ -120,9 +120,7 @@ struct fsl_edma3_ch_reg {
> /*
> * These are iomem pointers, for both v32 and v64.
> */
> -struct edma_regs {
> - void __iomem *cr;
> - void __iomem *es;
> +struct edma2_regs {
> void __iomem *erqh;
> void __iomem *erql; /* aka erq on v32 */
> void __iomem *eeih;
> @@ -141,6 +139,12 @@ struct edma_regs {
> void __iomem *errl;
> };
>
> +struct edma_regs {
> + void __iomem *cr;
> + void __iomem *es;
> + struct edma2_regs v2;
> +};
> +
> struct fsl_edma_sw_tcd {
> dma_addr_t ptcd;
> void *vtcd;
> diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c
> index 9873cce00c68..0b89c31bf38c 100644
> --- a/drivers/dma/fsl-edma-main.c
> +++ b/drivers/dma/fsl-edma-main.c
> @@ -36,13 +36,14 @@ static irqreturn_t fsl_edma_tx_handler(int irq, void *dev_id)
> unsigned int intr, ch;
> struct edma_regs *regs = &fsl_edma->regs;
>
> - intr = edma_readl(fsl_edma, regs->intl);
> + intr = edma_readl(fsl_edma, regs->v2.intl);
> if (!intr)
> return IRQ_NONE;
>
> for (ch = 0; ch < fsl_edma->n_chans; ch++) {
> if (intr & (0x1 << ch)) {
> - edma_writeb(fsl_edma, EDMA_CINT_CINT(ch), regs->cint);
> + edma_writeb(fsl_edma, EDMA_CINT_CINT(ch),
> + regs->v2.cint);
> fsl_edma_tx_chan_handler(&fsl_edma->chans[ch]);
> }
> }
> @@ -78,14 +79,15 @@ static irqreturn_t fsl_edma_err_handler(int irq, void *dev_id)
> unsigned int err, ch;
> struct edma_regs *regs = &fsl_edma->regs;
>
> - err = edma_readl(fsl_edma, regs->errl);
> + err = edma_readl(fsl_edma, regs->v2.errl);
> if (!err)
> return IRQ_NONE;
>
> for (ch = 0; ch < fsl_edma->n_chans; ch++) {
> if (err & (0x1 << ch)) {
> fsl_edma_disable_request(&fsl_edma->chans[ch]);
> - edma_writeb(fsl_edma, EDMA_CERR_CERR(ch), regs->cerr);
> + edma_writeb(fsl_edma, EDMA_CERR_CERR(ch),
> + regs->v2.cerr);
> fsl_edma_err_chan_handler(&fsl_edma->chans[ch]);
> }
> }
> @@ -216,7 +218,7 @@ fsl_edma_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma
> {
> int ret;
>
> - edma_writel(fsl_edma, ~0, fsl_edma->regs.intl);
> + edma_writel(fsl_edma, ~0, fsl_edma->regs.v2.intl);
>
> fsl_edma->txirq = platform_get_irq_byname(pdev, "edma-tx");
> if (fsl_edma->txirq < 0)
> @@ -281,7 +283,7 @@ fsl_edma2_irq_init(struct platform_device *pdev,
> int i, ret, irq;
> int count;
>
> - edma_writel(fsl_edma, ~0, fsl_edma->regs.intl);
> + edma_writel(fsl_edma, ~0, fsl_edma->regs.v2.intl);
>
> count = platform_irq_count(pdev);
> dev_dbg(&pdev->dev, "%s Found %d interrupts\r\n", __func__, count);
> --
> 2.47.0
>
next prev parent reply other threads:[~2024-12-16 16:17 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-16 7:58 [PATCH 0/8] Add eDMAv3 support for S32G2/S32G3 SoCs Larisa Grigore
2024-12-16 7:58 ` [PATCH 1/8] dmaengine: fsl-edma: select of_dma_xlate based on the dmamuxs presence Larisa Grigore
2024-12-16 16:16 ` Frank Li
2024-12-17 14:28 ` Larisa Ileana Grigore
2024-12-16 7:58 ` [PATCH 2/8] dmaengine: fsl-edma: remove FSL_EDMA_DRV_SPLIT_REG check when parsing muxbase Larisa Grigore
2024-12-16 16:17 ` Frank Li
2024-12-16 7:58 ` [PATCH 3/8] dmaengine: fsl-edma: move eDMAv2 related registers to a new structure ’edma2_regs’ Larisa Grigore
2024-12-16 16:17 ` Frank Li [this message]
2024-12-17 14:27 ` Larisa Ileana Grigore
2024-12-16 7:58 ` [PATCH 4/8] dmaengine: fsl-edma: add eDMAv3 registers to edma_regs Larisa Grigore
2024-12-16 16:18 ` Frank Li
2024-12-16 7:58 ` [PATCH 5/8] dt-bindings: dma: fsl-edma: add nxp,s32g2-edma compatible string Larisa Grigore
2024-12-16 16:18 ` Frank Li
2024-12-17 5:26 ` Krzysztof Kozlowski
2024-12-17 14:26 ` Larisa Ileana Grigore
2024-12-16 7:58 ` [PATCH 6/8] dmaengine: fsl-edma: add support for S32G based platforms Larisa Grigore
2024-12-16 16:20 ` Frank Li
2024-12-16 7:58 ` [PATCH 7/8] dmaengine: fsl-edma: wait until no hardware request is in progress Larisa Grigore
2024-12-17 5:27 ` Krzysztof Kozlowski
2024-12-17 14:19 ` Larisa Ileana Grigore
2024-12-17 15:27 ` Krzysztof Kozlowski
2024-12-18 13:24 ` Larisa Ileana Grigore
2024-12-18 13:32 ` Krzysztof Kozlowski
2024-12-18 13:38 ` Larisa Ileana Grigore
2024-12-18 14:10 ` Krzysztof Kozlowski
2024-12-18 15:39 ` Frank Li
2024-12-16 7:58 ` [PATCH 8/8] dmaengine: fsl-edma: read/write multiple registers in cyclic transactions Larisa Grigore
2024-12-16 16:09 ` [PATCH 0/8] Add eDMAv3 support for S32G2/S32G3 SoCs Frank Li
2024-12-16 16:22 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z2BSn91PDfwKOc8s@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=aruizrui@redhat.com \
--cc=clizzi@redhat.com \
--cc=dmaengine@vger.kernel.org \
--cc=eballetb@redhat.com \
--cc=imx@lists.linux.dev \
--cc=larisa.grigore@oss.nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=s32@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox